Printer Driver Doesn't Show Up.

I have a Canon Pixma MP500 (Multifunction). It's only about two months old.
Up until last weekend, I was still running Jaguar. My printer worked perfectly. I upgraded to Tiger on Saturday and didn't try to print anything until today. When I tried to, I saw my printer was no longer installed. However, it was detected. When I tried to add it, the correct driver was not listed. I put in the install disc that came with the printer, re-installed the software and restarted. The correct driver still didn't show up. I went to Canon's site, downloaded the drivers, installed again and restarted. They're still not listed. I tried to choose some of the drivers that are listed to see if I can print an email, but anything I spool just sits there in the queue.
What do I do next? I know it's plugged in correctly. I haven't touched it since I set it up two months ago and it was working perfectly fine just before I upgraded to Tiger.

I've same problem, same Pb 17'
the difference is that my printer was working in TIGER till yesterday. Unexpectly yesterdey I lost drivers, MP500 disappeared, I've reinstalled drivers but...nothing.
Pb find printer, but doesn't find drivers; drivers are installed.
I think I need help.
p.s.:Same problem with PIXMA ip1600.
Pb 17' Mac OS X (10.4.7)

Similar Messages

Scanner driver doesn't show up in Photoshop

Sorry if this isn't the right forum for this...
I have a Samsung SCX-4521F multifunction printer/scanner that I can't get to scan. The software that comes with the printer doesn't work with Macs so the manual says to install the included Twain driver and scan via Photoshop. I've installed the driver, twice now, and the printer still doesn't show up under 'Import' in PS. There isn't a listing for Twain under Import, either.
The printer is connected to an Airport Extreme base station and the AP extreme is connected to the computer via an ethernet cable. I can print with no problems so I know the computer can see the device. Is there some sort of setting that's keeping PS from seeing the scanner?
I need to scan in a ton of photos so I need to get this resolved asap. Please help!
I'm using PS CS3 extended, BTW.

It seems that the driver that came with the printer isn't compatible with intel iMac PS. If I open PS via Rosetta the driver comes up under import. Open PS up regularly and it's missing.
That problem is solved but now I have a new one. The driver shows up in PS but when you select it you get "scanner not found". On a hunch I unplugged the printer from my Airport and connected it directly to the iMac. When I do that it finds the scanner and I can scan without a problem. I don't know if it's an Airport issue, permissions issue or if the PowerPC driver doesn't communicate well with the Airport.
If I make more headway I'll update this thread for the benefit of future searches.

My external hard drive doesn't show up in finder, is it dead?

My external hard drive doesn't show up in finder.Time machine can't find it. Does this mean my external hard drive is dead?
I borrowed a friends and switched mine with hers. My acted the same way in her macbook. I switched the cords on the external drives, no change.
Also, Is there a way to retrieve the information from my sick external hard drive? Thanks for your help.

If the Disk Utility sees it, you might be able to repair it or recover the data on it with a product such as DiskWarrior or Data Rescue.
If the Disk Utility doesn't see it, contact professional support.
(64290)

URGENT Trying to wipe and reinstall Leopard 10.5 on my 2008 imac8,1 from the disk but my hard drive doesn't show up

So to give a little big of a background on my computer. I got it January 2009 as a graduation gift, because I was going to get a degree in Graphic Design and Animation. I only worked on it [mostly brousing the web, and itunes] for about 6 months because I was taking all of my general courses for college. I then met my boyfriend [late 2009] and moved in with him, my boyfriend has a macbook so I left my mac at my parents house. I was only Using it every now and then and it would be idle/ or shut off the rest of the time.
Fast forward to fall 2011. Me and my boyfriend live in a condo so I brought my computer over because I am now taking graphic design courses and need my computer. I installed a free 30 day trial of adobe cs5.5. It made my computer kind of slow and it froze alot even though I still have over 250gb's of memory in it. After the trial ended I kind of stoped using my computer again, rather installing the free trials of cs5.5 on my mom and my boyfriends macs until I had enought money saved up to buy it.
Here's where it gets tricky.
So now its March 2012 and I tried uninstalling the trial of cs5.5 on my computer since it was just taking up un needed space. I had to uninstall all of the programs one at a time other wise it would freeze up. I have had to hold the power button down to get it to turn off because i couldn't even move the mouse even after waiting a while. Anyhow I get to the last program and it keeps freezing, I tried shutting down my computer via<apple< shut down. But when I start it up again I got a file with a question mark flashing on my screen. So I looked up how to fix that and had to locate where to start up [I selected my hard drive] then I was able to get on to my computer.
So then I go to disk utilitys and do a repair on my internal hard drive to fix if there were any messed up files. After the files are repaired I figure I'll restart it and let everything get up to date. When I do I get the gray screen with the apple and the spinning wheel. This happens OVER and OVER. I tried soft reseting it, manually turning off the computer, you name it. But it still keeps happening. So I figure I'll just wipe it clean and reinstall the whole thing. [I have it backed up on an external drive]
I try to reinstall leopard 10.5 from the disk that came with my computer, all goes well until I gets to the 3rd screen where you select where to save it to, my hard drive doesn't show up. But if I connect my external hard drive it shows up right away. I try seeing if it pops up on disk utility, and it doesn't show up there either.
Is it possible that my hard drive is shot? I haven't really used my computer that much. Its pretty much sat at my parents house for 2 of the 3 years I've had it. So its not like I used it a whole lot.
Help! I'm a college student who needs her mac now more than ever for my design classes!

The battery alone is a $5 to $15 part. Hard drives vary in cost, and depending on the iMac, they may or may not be able to install a third party hard drive, or one resold through Apple.    The resold through Apple drives tend to cost more. This article discusses the varying successes of third party drives on iMacs:
http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im acs
The labor costs depend on the store as well as the time to get the parts in stock.    Call around.

ICloud Drive doesn't show up my Numbers folder on my new macbook pro.. what to do?

iCloud Drive doesn't show up my Numbers folder on my new macbook pro.. what to do?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Western digital hard drive doesn't show up anymore

I bought a Macbook Pro a few months ago and I've been using my Western Digital external USB hard drive with up until now with no problems. Then today for some reason, I turn my computer on and the drive doesn't show up anymore. It doesn't show up in disk utility either. I've rebooted a few times but no luck. I inserted a flash drive and it mounts ok so it's not the USB port. I even switched usb cables just in case the cable was bad. Any suggestions?

Hi there
Sorry to hear you are having trouble with your Mac.
Is the ext HD a powered drive (needs AC power to run) or portable? (smaller, doesn't need to be plugged in to AC)
If its AC powered, check that all the usual lights are lit up on it (flashing activity light, power light etc), if not, then you would need to contact WD.
You can also try resetting the SMC & PRAM, as I have seen this cause a HD to not mount before.
Cheers

My DVD/CD drive doesn't show up in finder, it does via VM ware on XP, how do I get it to show up in both OS

my DVD/CD drive doesn't show up in finder, it does via VM ware on XP, how do I get it to show up in both OS

If the Disk Utility sees it, you might be able to repair it or recover the data on it with a product such as DiskWarrior or Data Rescue.
If the Disk Utility doesn't see it, contact professional support.
(64290)

Hi, my dvd drive doesn't show on my computer and device manager. can anyone help me?

Hi, my dvd drive doesn't show on my computer and device manager. can anyone help me? Notebook HP dv6700z.
This question was solved.
View Solution.

Hi,
If the drive is not showing in the list of bootable devices, you can be fairly certain that it has suffered a Hardware failure and will need to be replaced.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

What do i do when external optical drive doesn't show up in finder? how can i import software, music, etc. when the drive isn't recognized/mounted/whatever?

the internal optical drive on my early 2006 20"imac has mechanical problems ejecting discs. i've gone thru all the recommended steps to eject discs, and have luckily been able to eject the last 3 discs but only after spending 30-60 minutes going thru all of the steps over and over, and today just trying "eject disc" in itunes since i had itunes open. i don't want to put another disc in - the drive clearly has problems with the mechanical eject mechanism, and from what i've read that's not unique to my computer.
i bought an external optical drive: lite on, clamshell design to avoid problems with the eject mechanism; i contacted the mfr who said it's mac compatible.
the drive plays dvds, which is all i've tried so far, but doesn't show up in finder. so i don't know how to use it to load software, or music, or anything besides watch dvds.
is there something i can do to get the drive recognized/mounted/whatever? i would prefer to not spend the $220 which was quoted to me by an authorized mac repair company, even tho i think that's probably a reasonable cost given the delicacy of the operation as shown on ifixit.com.
thanks!

I have an external LaCie burner and it will not show up on my Mac unless I insert a CD or DVD - in that case, the media will show up (I have these settings in the Pref Pane):
If you want to burn files or music to blank media, you can use Finder or Disk Utility for files, but should use an iTunes playlist/iTunes for music and a movie burn app for videos/movies (such as iDVD, Roxio Toast, Burn, etc).
If you simply want to drag files over as a backup, an external hard drive is a much better solution than a burner.

External hard drive doesn't show after upgrade to Yosemite

I upgraded to Yosemite and now my WD 1TB external HD doesn't show up on my MacBook Pro 2.9 GHz. It shows in the system information under 'About This Mac', but I can't access it. So I can't use Time Machine to do any back-ups, and I can't back up the files on the external drive before reformatting it. Anyone know how to fix this? From other web communities, this seems to be an Apple problem and NOT a hardware issue.

If it shows in Disk Utility, use the Restore tab to copy the files to another location. Note the warning about reformatting the destination.

My external hard drive doesn't show anymore

Hello Everyone,
I hope you can help me. Today I wanted to put new data on my WD hard drive, I have it for almost a year and always worked fine (it's just USB, no power necessary). But my External HD was almost full so I deleted the "time machine" back-ups. Now, my Macbook Pro or iMac doesn't show my WD in Finder. I can find it in Disk Utility but only for a few seconds. Can someone please help me by giving some tips or own experiences? Thanks!

If you want LR to show the full path of a directory tree as it is on an actual drive, you are going to have to fool it into showing it to you.
a) Place a COPY of a photo, ANY photo, in the directory/folder that you want to show as the root of your folder tree in LR.
b) Using "Import Photos from disk" import ONLY the photo that you placed in the 'root' folder, by DOUBLE-CLICKING on it so that only it is imported.
c) After the import, your folder structure should now look the way that you want it to in LR, matching the actual drive structure from the root upwards.
d) Using LR, delete the photo that you used as a placeholder. The LR Folder structure should remain intact.

My external hard drive doesn't show up on my desktop screen

I have a 1TB external drive that connects by USB. I use it as a Time Machine and for other storage. It worked fine until a few weeks ago. Now, when I connect it, the drive starts spinning, but it doesn't show up on the desktop screen or in Disk Utility.
Other USB drives and devices work fine when plugged into either of my USB ports. Also, this particular 1TB drive works fine with my older MacBook. It's just that this particular external drive and this particular MacBook Pro don't seem to be working together.
Thoughts?

Does it show up in disk utility
remove and reconnect the USB connector on the drive end., check Finder > prefences > general ....is hard disks checked?
Have you used this HD on that Mac before?
Does this HD show in another machine/ Mac?
Work the process of elmination. Report back.

External Hard Drive doesn't show up

hi.
i'm having an issue with my external hard drive. this morning i went to plug it in since that's where i store all of my music, and for some odd reason it didn't work. i have a feeling it's because the night before i unplugged it without ejecting it. my mistake, i know, but now the drive is all messed up. earlier i was able to view the volumes on it in disk utility, and before deciding to erased anything i plugged it into my sister's dell where i transfered everything on the drive. now, when i plug it in my macbook it only shows up in disk utility without the volumes, it doesn't show up on the dell anymore, and when i go to erase everything it tells me "operation timed out".
i'm at a loss of what to do. i tried restarting the macbook, unplugged the cables... nothing seems to work. i would really like to get the thing back to factory settings if that's possible. so if anyone can offer help, it would be most appreciated. the external drive is a 500GB Maxtor OneTouch

Try this:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the drop down menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
If you plan to use this drive on both your Mac and a PC, then format the drive MS-DOS rather than Mac OS Extended.

USB Dard drive doesn't show up after i failed to eject it

i turned off a usb external drive without ejecting it first and now it doesn't show up on the desktop,
when i run disk utility it just shows the gathering disk information but doesn't get past this unless i turn off the drive again. is there a way of fixing this as i've has it happen before and after a while the drive comes back after i leave it for a while.

for some reason it just came back on after i left it for 10 minutes.

External drive doesn't show up.

I have a LaCie mini hub external drive that I use as a backup drive for my Mac Mini. Well, the drive in the Mini died. I took the LaCie to the Apple store with the Mini and they confirmed that the external drive was working OK, by either USB or Firewire. They kept the Mini for warranty repair and I'm still waiting for it to return.
I get home and attach the LaCie drive to my ibook, but the ibook doesn't see it. It doesn't show up with system profiler, so I can't even try running Disk Utilities on it. The hub function of the LaCie seems to work OK, but that's probably not surprising, and has little to do with the hard disk inside it.
The Mini is a intel duo core running OS X 10.4.8
The ibook is a G4 running OS X 10.3.9
The LaCie is 250 GB, formatted using HFS+, according to the manual.
Mostly I just want to reassure myself that the backup is intact on the LaCie drive. Any thoughts?
ibook G4 Mac OS X (10.3.9)

Mostly I just want to reassure myself that the backup is intact on the LaCie drive. Any thoughts?
You might have a look at the demo version of iPartition.
http://www.coriolis-systems.com/iPartition.php
The demo won't write any changes, so hopefully it is a safe way to confirm that you still can access your drive -- though it won't actually let you get the contents, since it is a partitioning utility.
(If it were me, I'd leave well enough alone until your fixed Mini returns.)

Printer Driver Doesn't Show Up.

Similar Messages

Maybe you are looking for