Printer driver hp5520e installation of driver

How to install printer driver to iPhone (hp5520e)

Hi there,
You actually don't need a driver to print from your iphone. You have a few different options to print. The Photosmart 5520 e-All-in-One actually supports both AirPrint, ePrint, and the HP ePrint Mobile app.
The following document might help you:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02796271&tmp_task=useCategory&cc=us&dlc=en&lc=e...
I work for HP.

Similar Messages

I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go.

I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.

Hold down the option key and select
 ▹ System Information...
from the menu bar. In the window that opens, select
Hardware ▹ USB
from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown?

Reader 9 Acrobat PDF Printer Driver Continuously Installs

Since I have installed Reader 9, the Acrobat PDF Printer Driver Continuously Installs in the background degrading system performance. Does anyone else have this problem? It auto created a System Restore point, so check that. I am running XP with all patches applies.

Hi Mike,
I have exactly the same problem that you describe. At first I thought it might be malicious software that was installing a fake driver, but after running Malware, Spybot and some other programs, I'm still left with the problem. I have a lot of Adobe software installed (Adobe Premiere Elements 7, Adobe Acrobat Pro 8, Adobe Audition 3, Adobe PhotoShop 7 and of course Adobe Reader 9, plus as you indicate Adobe Air and Acrobat.com I'm not sure when my problem started, since I only recognized it when I went to do a system restore. It appears to install the driver about once a minute. This leaves me with about 3 days worth of useless restore points.
The only advice that I have received is to un-install all my Adobe stuff, then check the System Restore, then one by one re-install the packages checking each time what happens in the system restore.
Have you found any solution since your original post?
Dave Freeman
Peterborough, Ontario
Canada

Printer Driver Installation Requires Rosetta...Hmmm?

Hello, I have a new Macbook Air with SL OSX 10.6.6 and the CD drive. I also bought an EPSOM printer (all in the Netherlands). On installing the driver for the printer, a warning came up saying thta if I did not first install Rosetta then the installation may not be enitrely successful. So I have hunted around for this elusive Rosetta and tried to understad what the heck it is... Beats me.
Any help would be much appreciated with some advise on How I can get the driver installed anyway whether or not with Rosetta.
Thanks
PS. I do not have access to any of the other computers for the time being.

Rosetta is the interface that allows Power PC apps to run on Intel machines and was first introduced in 2006 when Apple switched to Intel processors. You don't need it unless you cannot find an updated printer driver for your printer(s) to use in Snow Leopard. Apple updates their drivers all of the time and the manufacturers do also.
I suggest that you go to the support site for each of your printers and check to see if you have the latest. Your printers may also be included in the drivers that came with your Mac. Apple has instructions for installing printers. It is easier than it used to be..... If you put in the effort, your printers will have most of the designed features working properly. If you don't, you may be limited in what and how you can print.

Network printer driver installation

Product Name: Hp Pavilion dm4 Notebook PC
Product No.: QE374UAR#ABA
OS: Window 7 64 bit
How to install network hp lesarjet 5200 printer driver to client computer window 7 64 bit os?

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Can't find Epson 9900 printer driver after installation.

After installing the printer driver for my epson 9900 printer, it doesn't show up in the printer dialogue box in system preferences. When I try printing from Photoshop it also doesn't show up in selecting a printer. I am upgrading from a previous 9900 printer driver. I trashed the old printer driver. After installing the new printer driver, I restarted my iMac. But still it doesn't show up.
Gar

Try resetting the printing system.
OS X Mavericks: Reset the printing system Yosemite

Installation error printer driver download

I am a ,oyal HP fan for years....I am the orginal owner of the laser jet for about one year. Finally took the leap to a laser from ink... I can not find my original CD and paperwork. Am sending a screen shot of the isse? I get to about 75 % installed and I get this message. Been trying for a few days nows. Trying to reinstall drivers. I lost all drivers when trying to fix the scanner that stopped working. Now all is deleted. Need immediate help please. Please reinstate my confidence and value of these HP forums. Thank you very much, Steve

I received a suggestion from an HP engineer, he suggested the following. Please post back here if temporarily removing the Universal Print Driver does (or does not) resolve the issue: Could we check and ask to uninstall UPD from the system and then try install the Printer. 1. From the Program and Features a. Go to Control Panel>Program and Features b. Look for "HP Universal Printing PCL5" or HP Universal Printing PCL6" c. Select and click uninstall. d. Restart the computer e. Install the HP Laser Printer f. Install UPD and UPD Printer if required. 2. From Print Server Properties in Devices and Printers or Printers (Vista) a. Go to Control Panel > Devices and Printers or Printers (Vista) b. Vista - Right Click in the Window in a blank space and click "Server Properties" Win 7 and above - Select any printer and look Bar below the Address Bar, click "Print Server Properties" c. Click Drivers Tab d. Click "Change Driver Settings" below the add button (skip if "Change Driver Settings" button is missing) e. Look for "HP Universal Printing PCL5" or HP Universal Printing PCL6" f. Select and click remove. g. Select "Remove Driver and Driver Package" and click OK. h. Restart the computer i. Install the HP Laser Printer j. Install UPD and UPD Printer if required.

Unable to load HP 8600 printer driver on laptop

Hi Folks,
Just installed a new HP Officejet 8600 printer into my home network. The network consists of 4 PC’s, two desktops and two laptops…all are running XP SP3 with the latest updates. The HP printer and one of the desktops are connected by Ethernet to a wireless router. The other desktop and both laptops are connected wirelessly via 802.11. Installation of the printer driver was successful with both desktops and one of the laptops. The other laptop, a Dell Latitude D520, fails on the final step of the installation process, after selecting the printer name following its detection on the network. Avast! Internet Security and Malwarebytes run on all the machines and are disabled, along with Windows firewall, during the install process. The following dialog is displayed:
“Unsuccessful Network Installation – The printer was unable to be installed over the network.”
No other error information is provided. I’ve tried installing from the product CD (which is up to date) as well as the driver software downloaded from the HP support site, rebooting multiple times. I also downloaded the recommended HP troubleshooting tool (HP Installation Failure – Unknown Device) and ran through the process a couple of times without success. All of the machines, including the D520 laptop, can see each other as well as the HP printer. There are no network issues I’m aware of.
I’ve exhausted what little expertise I have in this area. If anyone out there can think of a possible solution or provide some suggestions, I’d sure appreciate it. Thanks much.

Hello marconi10. Welcome to the HP Forums. I understand you are unable to install your printer on one computer, over a wireless connection. I'm going to suggest a very simple workaround, which if it works, will remove any complicated troubleshooting that would be necessary:
Please try installing the printer with a USB connection. If this does not work, you know that there is an issue occurring with the computer.
If this does work, the printer will be successfully installed. At that point, you can change the connection type from USB to wireless. For more information on how to do this, please reference this HP document: Convert from a USB connected printer to wireless
If the printer will still not connect wireless, this will point out a computer issue. For additional information and troubleshooting, relating to the inability of installing the printer over a wireless network, please reference this HP document: 'Unable to Find Printer' Error Message Displays on the Computer During Wireless Network Installation
Please respond with the results of your troubleshooting. I'm only here to help!
Mario
I worked on behalf of HP.

Unable to load Canon MP160 printer driver

I've had the hardest time using my Canon MP160 printer on my iMac (Mac OS 10.5). In fact, I'm not able to print at all.
I have the printer connected via USB. It always has been. However, it only stopped working recently.
I downloaded the drivers for the printer and scanner from Canon's web site. However, when I attempt to load the printer driver, the "Installing Canon IJ Printer Driver" window appears. It gets to the "Finishing Installation" part in the process. But it "hangs" at some point and does not complete. I've tried it twice. It hung at two different points in the process. I tried letting it run overnight. That was no good.
I've also looked for the "Printer Setup Utility" and can't seem to find that anyplace. I'm wondering why I can't find that.
If anybody could help me solve this, I'd be so thankful.

Hello marconi10. Welcome to the HP Forums. I understand you are unable to install your printer on one computer, over a wireless connection. I'm going to suggest a very simple workaround, which if it works, will remove any complicated troubleshooting that would be necessary:
Please try installing the printer with a USB connection. If this does not work, you know that there is an issue occurring with the computer.
If this does work, the printer will be successfully installed. At that point, you can change the connection type from USB to wireless. For more information on how to do this, please reference this HP document: Convert from a USB connected printer to wireless
If the printer will still not connect wireless, this will point out a computer issue. For additional information and troubleshooting, relating to the inability of installing the printer over a wireless network, please reference this HP document: 'Unable to Find Printer' Error Message Displays on the Computer During Wireless Network Installation
Please respond with the results of your troubleshooting. I'm only here to help!
Mario
I worked on behalf of HP.

How can i develop a custom Printer driver in LabVIEW

I have one application in which when ever user prints a document (He will print only certain type of documents)
it should get printed using some standard printer but at the same time the data should get communicated to our own custom device which is connected to the PC using serial port.
how can i do this.
I think if we can develop a our own driver which will first send data to serial device and then just call the standard printers driver then whole problem can be resolved
The application will run on windows platform and the data i am expecting is purely a text data.
Tushar Jambhekar
[email protected]
Jambhekar Automation Solutions
LabVIEW Consultancy, LabVIEW Training
Rent a LabVIEW Developer, My Blog

I think i have not explained my problem properly. i am sorry for that.
the problem is something like this.
my end user is already having one program which is generating the data (Unfortunately that program do not save data to any file and our requirement is online updatation of data) which i want to give to my serial device. he dont have the source code hence we can not alter that perticular code. the data might be available to us only when he prints the data, where we can select any one of installled printers.
hence we want to develop an application which will appear as printer driver to windows and when user prints we can capture printed data
i think problem will be clear now.
Tushar Jambhekar
[email protected]
Jambhekar Automation Solutions
LabVIEW Consultancy, LabVIEW Training
Rent a LabVIEW Developer, My Blog

Windows update error 800f0246 when installing printer driver

I have Win 7 pro 64 bit and an HP3520 printer. HP site says a Windows 7 driver is available via windows update. When I go into Windows update, the drivers shows up under optional downloads. When I try to download and install it it fails with error code 800f0246. All other updates install fine. I tried multiple times with the same error.
When I go into device manager the printer is listed under other devices with an icon indicating a driver issue. When I try to update the driver it finds the downloaded driver that Windows update downloaded. I select it and it fails.
I have Windows 7 beta still on my laptop and the printer driver installs from windows update just fine.
Any ideas?

No go. Uninstalled, rebooted, tried to reinstall again, still failed. Fails when the printer is disconnected as well. The HP site does not have a driver for manual install. Any links for a driver lead to here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01874792&lc=en&dlc=en&cc=us&lang=en&product=305968 Those steps do not work because the driver in windows update fails to install.

Printer driver was not installed. operation could not be completed

Adobe Acrobat 9.3.1
windows XP system.
Cannot add the Adobe PDF printer get the error message:
Printer driver was not installed. operation could not be completed
Software installs/repair try to install the Adobe PDF printer but they do not. No error message; just that the Adobe PDF printer does not show up
I tried adding the Adobe PDF printer manually.
The drivers start to load and then fails giving the error message in the subject line.
I cleared the print spoolers and rebooted.
I have uninstalled Adobe Acrobat /rebooted/reinstalled. Install says it adds the Adobe PDF printer but nothing happens.
Problem exists for all users including Administrators.
I have renamed the C:\WINDOWS\system32\spool\drivers\w32x86 and C:\WINDOWS\system32\spool\drivers\Printers folder.
Both are recreated when I try to reinstall the Adobe PDF Printer.
I can add network printers with no errors.
I have cleared Adobe PDF printer from registry. e.g.:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3\Adobe PDF Converter
I even imported Adobe PDF registry entry from a working system taking care to adjust the system values accordingly.
I also verified permissions for registry keys and application/driver folders were set correctly.
I have completely reloaded the installation software and imported the Adobe PDF drivers from a working system.
Not sure if this an Adobe issue, but that appears to be the only printer I cannot re-add.
Any constructive ideas on what to try next would be appreciated.

When I upgraded to Reader 9.4 I lost all ability to print Adobe pdf's. Finally uninstalled 9.4, re-installed 8.2, changed the filename "high quality.joboptions" to "Adobe PDF converter.joboptions" and was back in business. Pretty screwey fix, but after getting no help from online chats with Adobe and a day's lost work I was happy to have it.
[email protected]

HP Universal Printer driver no longer supporting T790ps

T790ps 44in Printer no longer available to be added using HP Universal Printer Driver PCL6 -
Was this removed from supported printers?
We only use IP printing and this printer is no longer able to be mapped using the HP UPD PCL6 -
Can someone please advise / update on this comment?
Thank You -

Sorry, I should have asked this earlier, what version of Windows are you using?
Since I don't want to waste too much more of your time with you waiting for me to reply, I will go ahead and give you two links of troubleshooting steps that I would recommend trying.
The Progress Bar on the Software Installation Stops or Stalls
'Device Setup Failed to Complete' or 'Unknown Device' Message Displays on the Computer in Windows Du...
The first one addresses the issue of the software not completing. The second, even though the title might not seem like an issue that you are having, addresses the issue of the printer not being recognized by USB.
Try those and let me know if either of them work. If they don't, get back to me with your version of Windows and I will see if I can find anything else to help you resolve your issue.
If I have been helpful or if you’d like to say thanks you can click the white star under my name to give me Kudos. I really appreciate it!
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Printer Driver needed for Windows 8.1 Computer

I just bought a new computer and I need printer driver for HP Photosmart C4380. I am runing windows 8.1 so I can install my printer.

@KRS26
Welcome to the HP Forums!
I am here to help you find the drivers for your Photosmart C4380 to install on your new PC.
Click this link, download and follow the installation instructions and you should have your printer installed in no time: HP Photosmart Full Feature Software and Drivers
I hope that helps, have a great weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Canon MP620 print driver does not work with Snow Leopard

Bought a Macbook & bundled Canon MP620 printer in Dec 08. Two days ago upgraded to Snow Leopard, and I can no longer print (the printer is not recognized), it only sees "Bonjour scanner" (the printer is a multi-function printer, copier, fax, scanner). Spent more than two hours with two different Apple tech support people over the phone; talked to Apple personnel in store. My printer is connected via Ethernet cable to a wireless modem, and I connect to the wireless modem via Airport. The phone tech person insisted that this printer is supported by Snow Leopard, but we reloaded the print driver from the Snow Leopard installation disk with no results. Finally my last resort, which worked, is to go to Radio Shack and get a cable that has a USB-A (printer) to USB-B (Mac) attachment. I was able to print. It is unacceptable for Apple to have this problem, as I went into the store four different times to discuss whether I should upgrade to Snow Leopard, and was told on every occasion that Snow Leopard will make everything run faster, more smoothy, etc. NOT! I want Apple to post a notice on their web site to a) confirm their print driver problems with Snow Leopard and b) to confirm WHEN new print drivers will be released.

Have a look at my last posting re Canon network printing.
http://discussions.apple.com/thread.jspa?threadID=2128186&tstart=0&messageID=100 97438#10097438
i got my MP980 working via Ethernet and wireless. The same procedure should work for your MP620.
Pahu

Printer driver hp5520e installation of driver

Similar Messages

Maybe you are looking for