Printer Driver Not Recognized

When I go into Devices and Printers, the Icon for my Computer shows the triangle error. I troubleshoot and it finally says that the default printer driver is missing or corrupt. I cannot print from my email program, Thunderbird. I can print from Word and Excel. This is strange. Can anyone help?

Thank you for all that information.
Satellite E105-S1802
Downloads are here.
HP Deskjet 3000 Printer - J310a
I can print from Word and Excel.
That's really peculiar. If the driver is missing, you should not be able to print at all. Can you print from Notepad (notepad.exe) and from Paint (mspaint.exe)?
Any yellow splotches in Device Manager (devmgmt.msc)? If so, show us lots of pictures. Dougle-click the device in question to open its Properties and show us Device status and so forth.
Tell us how this printer is connected.
In the meantime, let's looks after the System Restore problem. In most cases, this happens when shadow storage becomes corrupt. The fix is to turn System Restore off and then turn it on again. Unfortunately, that removes all previous restore points.
Turn System Restore on or off
-Jerry

Similar Messages

Drive not recognized - new issue...help please

I am replacing a 120 GB drive with a 250 GB one to give more space for video files. On reboot, I get the message: You have inserted a drive not recognized...etc...with the choices to initialize, ignore or eject.
Then I notice that the drive on the same bus (in the bottom of the tray) is not seen on the desktop. It was in two volume partitions and was also a 250GB. Big mystery. So I remove the new one and connect just the older drive. No luck, message says ...a drive not recognized...etc. So then I change the jumpers twice - same results - and I remove the jumper...same thing. I see this drive in Disk Utility represented by a number and size (232 GB) but not by the volume names. And when I try to verify or repair, the option is greyed out (yes, I booted to the install disc and went to Disk Utility, as per instructions.
This disk has data on it I need, and it's not backed up. All I did was unplug the connectors and then replaced them as before. So please, tell me how I can restore this one. I could remove it and put it in an external FW enclosure and then see if it shows up, but I don't want to take chances. Worse case scenario is a data retrieval service - and I'm almost certain I shouldn't have to do that as this is a healthy drive.
Any suggestions very gratefully appreciated, thanks!
Keith

Tom, I tried every one of your suggestions: set the older drive (Seagate) at P4 and first connector on IDE ribbon to cable select and the new drive (Hitachi) in tray just above it at P5 - end connector on ribbon also to cable select. Result: two dialog boxes for both drive on reboot "You have inserted a device not recognized..."
Then I tried slave on the Seagate and Master on the Hitachi...same result as above.
Then I tried alternate Master and Cable Select configs. on the Hitachi for 15 or 16 pin..whatever that is...but was printed on strip on drive. No go.
I think it must be another issue here than jumpers...although that may have something to do with it. When I installed a new drive in my Quicksilver I never got the Device Not Recognized dialog...it either saw the drive with all data on it or it didn't, until I set the jumpers correctly, as directed for that incident.
What bothers me is that when I removed the new Hitachi entirely and reconnected the old Seagate as the only drive on that cable, either with jumper set to CS or M or S I am still getting the dialog.
Any other solutions, please.
K.

Hard drive not recognized during windows server 2008 setup

hard drive not recognized during windows server 2008 setup

Hi,
Whether the hard disk is recognized in BIOS?
Connect it to another computer to see if it could be recognzied incase the cause is the disk itself. Also please check if it is really a RAID instead of a single hard disk - a single disk should be recognized directly while RAID cannot be recognized until
a suitable driver is installed.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Vista and ipod nano driver not recognized?

My computer (vista) won't recognize my ipod nano second generation. It tells me driver not recognized?
So when I plug in my ipod a little screen pops up and tells me that No drivers are installed for this device. Where can I download a driver
Thanks,
[Income For Life|http://www.website.ws/freedombucks]
Message was edited by: komrad

Apple has release a new version of iTunes 8, in responce the issues with Vista.
1.Unistall iTunes via StartMenu\Control Panel\Programs and Features
2.Delete all previous iTunes installers.
3.Download iTunes 8 from the Apple website.
4.Makes sure you close Outlook and Explorer and all non-essential programs, as it seems to prevent the install at certain points.
5.Install iTunes 8.
6.After the Install is complete, Open iTunes 8 before attaching your iPhone.
7.Unlock your iPhone if it is lock with a pass code.
8.Attach your iPhone, after a few seconds you should see that it has installed a driver for your iphone, then the iPhone will appear in iTunes.
I hope this helps, as I did spend some time with this issue myself.

My Image CLASS MF4350d printer is not recognized by windows 8-64 bit

My Image CLASS MF4350d printer is not recognized by windows 8-64 bit any help how can i fix the problem. I just bought new HP computer from Future shop and it came with Windows in it. but this windows8 doesnt have drivers for my printer Image Class MF 4350d. Now I hve no clue how can i fix this isue. Because I checked on Canon website for drivers and downloaded and run the drivers, but no solution for my printer at all.

Yes. I have the latest version intalled but this hasnt helped.
I thought it could be to do with the Shuffle not having enough of a battery charge.
So i plugged it into the wall charger and then tried this didnt work either.
It wont even play music for some reason. The only information I get in the earpiece when I turn it on is what the battery level is at.

My dvd drive not recognized in device manager,getting the yellow explanation mark.

my dvd drive not recognized in device manager,getting the yellow explanation mark. Tried uninstallingdevice drive and scanning for new hardware. scanned for updates, etc. I getting no results. The laptop is a Pavilion DV5. Thanks

Hi,
It could be that the drive has a Hardware issue, but try the following.
From the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, open Device Manager, right click the DVD drive and select Uninstall. When this has completed, restart the notebook and let Windows rediscover the device and check.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

USB flash drive not recognized on desktop or disk utility

I see a number of similar threads to this but nothing solves this problem. Any help will be greatly appreciated as I am about to go crazy!
I have 3 USB thumb drives that all worked 2 days ago - now only one does. I have tried all drives in multiple ports and the same result. I have restarted the iMac (2009 Yosemite) a number of times and the same result.
This came about attempting to create bootable USBs with each of these. I was struggling with the process on my mac so took 2 (brand new 16GB PNYs) to a PC created the live boot USBs and they booted fine on the PC (knowing this wouldn't boot my mac). I did however plug them into my mac and they were recognized. I finally found success creating a Ubuntu live boot with my old USB. With that success I wanted to try with one of the new USBs on the mac.
Here is what I did:
1. Using Disk Utility - Reformatted the drive 1 partition MS Dos FAT 32
2. In Terminal unmounted the drive and ran a dd command to copy the linux .img file successfully
3. Box came up saying drive not recognized and selected to ignore (this happened on my old one that still works also)
4. Ejected drive from terminal
5 Restarted mac and attempted to boot from USB without success.
After this the 2 new USBs were no longer recognized in any usb port while the other still is. They do not show on the desktop nor in Disk Utility. I checked them on the PC and they are still both recognized and showing the FAT 32 format.
Help please!

Thank you for the reply. I found some time to go through this process a number of times without success
Any other suggestions?

HT5639 after The Boot Camp for Windows 8? DVD Drive Not Recognized or Reading CD/DVD

after i made The Boot Camp Setup for running Microsoft Windows 8? DVD Drive Not Recognized or Reading CD/DVD

thanks for the response
1. Yeah I thought that's a mandatory thing because i need to be able to control the brightness with my keyboard, updated graphics card, boot camp control panel, etc
2. No there's no enable for this because Windows 8 recognizes it as a "disconnected device" and asks me to reconnect the dvd drive to the machine (which it obviously already is).
3. Ive tried those before, also even editing the registry but it didnt work.
It's weird because it never happened before on Snow Leopard » Lion bootcamp driver updates. Just in Mountain Lion

I just downloaded Java for OS X 2014-001 and my Epson Workforce 630 printer is not recognized? Any thoughts?

I just downloaded Java for OS X 2014-001 and my printer is not recognized. I use an Epson Workforce 630. Has anyone had similar problems?

Hi there wildwatercolors,
I would recommend taking a look at the printer troubleshooting steps found in the article below.
Troubleshooting printer issues in OS X
-Griff W.

Macbook Leopard Update- Hard drive not recognized?!?!

Question- What do you think caused this problem, and how can I best fix it?
(See below for information)
Well, I finally decided to update to Leopard. I put the disk in my Macbook, and everything went smoothly as it verified the installation DVD- until the end of the verification, that is. A message screen would pop up telling me the disk was dirty. "Okay," I thought,"No problem." I was a bit puzzled, though, because the installation with the same Family Pack disk went fine on my father's Mac. I cleaned the disk, and tried again. And again. Each time, I was greeted with the same message at the end of the verification. Frustrated, I took the disk and my laptop to Best Buy, hoping someone could help me there. We ran the installation again... to no surprise, the same problem occurs. This time, though, when we quit the installer and try to reboot, after the gray screen with the apple at the beginning, we are greeted with a black screen with one command line. NOT GOOD! We rebooted the computer again, this time starting up with a disk to check the permissions and hard drive. The diagnosis: The permissions on my Mac are screwed up, so it's not recognizing the hard drive. The Best Buy guy claims the permissions have been messed up since I bought the Mac, and everything will be just fine and dandy after I transfer the data to another computer, install the Tiger disk that my Macbook came with, update to Leopard, then transfer the data back to my Mac. I'm taking my Mac to the closest Apple store (about 2 hours away) for advice from the pros on Saturday. Until then, I'm hesitant to even turn the thing on, out of fear it will spontaneously erase the data or something to that extent.
Question: (in case you forgot)What do you think caused this problem, and how can I best fix it?

Unplugging worked!!!
I have no idea what PRAM is but someone said that unplugging your computer resets it so, I thought I'd give unplugging a shot. So, I shut down my computer and unplugged it. I also unplugged the power on the HD. (because I wasn't sure which one they were talking about.)
Anyway, I went away for about five minutes.
I came back plugged in the HD power first. Then, I plugged in the power cord for the computer and turned it on.
As soon as I logged in I was asked if I wanted to use my external HD for Time Machine backups.
I saw the icon for the HD on the Desktop where is belongs. I can open the drive and access the files with no problem.
Try this if you haven't yet.

IMac G5 Internal Hard Drive Not Recognized

I shut down my iMac G5 with the power button and not through the typical shutdown procedure once and then when it booted up it would not get past the gray screen. I eventually used the Leopard DVD to try to boot it and was able to get to disk utility to look at the drive. I tried to repair the drive but then the machine froze and I had to restart once more. Now the internal hard drive isn't recognized or seen at all. I actually switched out the SATA hard drive with another spare I had and that was not recognized either. I can get the mac to recognize the installation DVD still so I know my computer still functions properly but I just need it to recognize the drive now. Does anyone have any ideas how to resolve this?

Have you access to DiskWarrior or TechToolPro? Either of those might fix your problem otherwise, try booting from the Apple Hardware Test on your install disc and see what it says.

Hard crash now hard drive not recognized in disk utility.

During a virus scan the Macbook froze up now the computer does not seem to be accessing the hard drive. Tried to reinstall Leopard but the internal hard drive is not recognized (same is true when we tried to use Disk Utility). It will not start in safe mode either. Does this sound like a fried hard drive or maybe a corrupted drive that might be repairable with DiskWarrior? Any thoughts would be appreciated.

If the A/V you were using was Norton/Symantec, the drive may be OK. Norton is a virus.
Burn a Ununtu CD and see if you can boot into it and look at the drive before giving up on it.

Hard drive not recognized on startup after 10.4.6 update

This is hurting my brain.
I updated to 10.4.6 from the Software Update that popped up today. Upon restart it "froze" on the greyscreen with the Apple logo. (didn't make it to the spinning wheel). I even let it sit for a good 10 minutes, hoping it would snap out of it
Booted with install DVD (10.4.3) and ran First Aid. Here it see's the drive and found no problems, also ran repair permissions, which found a few on a HP printer driver installed ages ago. Now when I restart it just gives me the friggin flashing folder with a questions mark/finder icon.
Running disk warrior found a few things to repair, but still the same flashing folder with question mark
Next I popped in a backup hd with 10.4.5 on it, it loads up and sees the main hd. Huh?
So i backed up the important stuff and did an archive and install on the main hd. But still get the flashing folder w/question mark. GAH.
I rather not reformat as my backup hd is only 30 GB free and I have 80GB of data i need on the main hd!
Help?!

Oh yeah, forgot to mention that I tried that too when I was able to boot up with my backup HD. Actually I tried it again just for kicks. And now I get the the spinning wheel with the apple logo and does that for a good 5 minutes, then the apple logo changes to the circle with a slash.
At least I can stil see the drive when I boot up the backup hd. I suppose I'll just backup the files to dvd hmm 50gb divided by 4.7... 11 discs...

Hard drive not recognized in HDD bay.

Randomly, my laptop gave me the spinny pinwheel of death when I opened it, and upon restart, I got the good old folder with a "?" indicating there was no OS. Naturally, I booted up in network recovery, and low and behold, my SSD was not in the Disk utility list. I made an adjustment some time ago where I removed my optical drive, and installed the old HDD that came with the computer in it's place. I switched the drives, so that the SSD was where the optical drive should be, and the HDD in the drive bay. Upon startup, the computer booted up as usual from the SSD, and the HDD was not recognized. So from there I conlcuded that both the SSD and HDD are working correctly without failure. After putting the drives back where they originally were (HHD in optical bay, and SSD in Drive bay), and I booted up holding the option key, The SSD and recovery drive were there, but I received a prohibited sign (circle with slash) after a minute. Now it is not recognizing the drive again. I'm not sure whats going on, anyone hav any input?
Thanks

You have a faulty hard drive to logic board cable. Replace that and you should be fine and the drive put in the main bay should show up.

Hard drive not recognized in disk utility

I'm trying to replace the hard drive in my MacBook Pro , the old hard drive was not recognized in disk utilities after the computer crashed .After installing a new hard drive and booting from the original Mac OS install DVD,( leopard?) the new hard drive is not recognized either ? Help

It may be the internal connecting cable that is the problem. If you can install the new HDD in an enclosure, connect it to the MBP, then see if you recognize it using the OSX installation disk. If so, the internal connector should be replaced.
Ciao.

Printer Driver Not Recognized

Similar Messages

Maybe you are looking for