Printer driver Photosmart 1315 used in Windows 7 - 64 bit system

Is there a HP Photosmart 1315 driver I can download for Windows 7, 64-bit operating system?

Hello @liebjlieb34
Welcome to the forums!
Unfortunately, there are no drivers available for the Photosmart 1315 printer with Windows 7. If you would also like to see the available drivers, I have posted the link below.
HP Photosmart 1315 Printer Drivers
You can try running the Print and Scan Doctor tool to see if it will detect the printer to have it print for you. If this doesn't work, you can always give us a call to see if you have printer upgrade options.
Call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a wonderful Monday, I hope my post has answered your question!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

How to clean from print driver hp B209a-M on windows 8

How do I clean my print heads from the print driver hp B209a-M on windows 8

Hi rcstipe,
Welcome to the HP forums!
I see you have a Photosmart B209a and are wanting to know how to clean the printhead via the software on Windows 8. I will definitely do my best to assist you with this.
There is full feature software for your printer for Windows 8, so as you would have with the few previous versions of Windows, it's done through the HP Solution Center. If you don't have the HP software installed yet, please download and run the HP Printer Install Wizard to get the software installed.
If you're not sure where to locate the clean printhead function once the software is installed, please have a look at Step four: Clean the printhead under Solution six: Print and evaluate a print quality diagnostic report and troubleshoot defects in this Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems document to see where to locate it.
Hope to hear back from you soon!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Printer Driver Support for Computers Running Windows 8 Release Preview

Printer driver support for computers running Windows 8 Release Preview
HP is working to help customers have the best experience with HP printers connected to PCs running the final release of Windows 8. The pre-release time is a development period when HP develops and tests printer driver solutions. HP’s current plan is for Windows 8 compatible printers to be available when the new operating system is released to the public. HP is working with Microsoft to include drivers in the Windows 8 operating system for HP printers introduced in recent years.
There may be a variety of sources for a printer driver/solution for your HP printer on a computer running Windows 8 Release Preview.
inOS:
An in-Operating System (inOS) driver is a basic driver that is included within the operating system. You do not need to download or install any software from HP. Windows 8 Relase Preview contains several inOS drivers. If an inOS driver is available for your printer, you will have at least basic print capability with USB and Network and basic scan capability with USB only (if your printer supports scanning).
Windows Update:
There might be a more functional or more up-to-date driver available for your printer through Microsoft Windows Update. If Windows Update is enabled, then the Windows Update process activates automatically when you connect (USB and Network connections) the printer to the computer. It searches online for the most recent print driver on the Windows Update site. If the online driver is more functional than the currently installed driver in Windows 8, the computer downloads and installs this driver.
HP Supplied Printer Driver/Solutions:
Although HP does not formally support any pre-release versions of Windows Operating Systems, including Windows 8 Release Preview, we may supply some full functionality drivers* prior to the official release of Windows 8. These drivers may be supplied as a courtesy to our valued HP customers through this Support Forum, though no formal support will be available otherwise. We welcome feedback within these support forums. Please check back for further updates as the official release of Windows 8 approaches.
* Full feature drivers provide full product functionality, plus valuable software to help you get the most out of your printer.

Hi vireshr,
Check out the following thread.
http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/How-to-Get-Your-Inkjet-Printer-Working-with-W...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Can I print from my ipad using a windows 7 shared printer?

Can I print from my ipad using a windows 7 shared printer?

yes... all you need to do is go to the app store and look up something like; printer for ipad and then you are good to go. my ipad lets me so im sure it will you too. i hope i helped you

I am using your software: CS^ InDesign Suite on a PC using a Windows 7 operating system. Due to eyesight issues, I need to have the menu bars of programs in easy-to-read font and picture size. Specifically, the menu bar

Hi,
I am using your software: CS6 InDesign Suiteon a PC using a Windows 7 operating system.
Due to eyesight issues, I need to have the menu bars of programs in easy-to-read font and picture size. Specifically, the menu bar across the top (File, Edit, View, etc.), and the menu bar on the left side with the graphic depiction of options.
In earlier versions of Windows (e.g. XP), whenever I changed the screen resolution on my computer to a lesser resolution in order to show the link icons on my desktop in a larger, more readable size, all the software programs, including yours, appeared on my screen with the menu bars in the larger font size that I needed.
However, in Windows 7, this is not the case. Even though I have selected the lowest resolution, making the icons on my desktop extremely large, I cannot read the options across the top menu bar of your program, nor the pull-down menu items that they contain. I cannot see the graphic depictions of options on the left side of the screen. They are all too small. How can I make your program increase the size?

CS6 is not high-DPI compatible/ enabled and that can't be changed. If you cannot6 make it work with your operating system means, then short of joining Creative Cloud and using newer versions there is nothing you can do.
Mylenium

I am using CS6 InDesign suite on a PC using a Windows 7 operating system. Due to eyesight issues, I need to have the menu bars of programs in easy-to-read font and picture size. Specifically, the menu bar across the top (File, Edit, View, etc.), and

I am using CS6 InDesign on a PC using a Windows 7 operating system.
Due to eyesight issues, I need to have the menu bars of programs in easy-to-read font and picture size. Specifically, the menu bar across the top (File, Edit, View, etc.), and the menu bar on the left side with the graphic depiction of options.
In earlier versions of Windows (e.g. XP), whenever I changed the screen resolution on my computer to a lesser resolution in order to show the link icons on my desktop in a larger, more readable size, all the software programs, including yours, appeared on my screen with the menu bars in the larger font size that I needed.
However, in Windows 7, this is not the case. Even though I have selected the lowest resolution, making the icons on my desktop extremely large, I cannot read the options across the top menu bar of your program, nor the pull-down menu items that they contain. I cannot see the graphic depictions of options on the left side of the screen. They are all too small. How can I make your program increase the size?

NO way.
Mylenium

Install PIXMA MG5320 on my second computor with windows 8 software/ .printer drive already in use.

I installed the printer on my wifes computor without and issues. Now I am attempting to install it on my computor. I am getting blocked in the installation point where you select all the software needed . when i hit ok it goes into the install mode but a window pops up saying printer driver is already in use. I never had a printer associated with this computor ...thisis the first. what do I do?

Hey addonag!
The reason this is occurring is because the driver bundled with Windows 8 is already installed on your computer. This happened automatically when the printer was connected to your computer through a USB cable. The installation does not overwrite this. All you need to do is uninstall the bundled driver and then this will install correctly. Please perform the following to do this:
1. On your keyboard, hold the windows key and press " X ".
2. Click Control Panel.
3. Select Devices and Printers. The Devices and Printers window opens.
4. Right click the PIXMA MG5320, then click Remove or Delete.
5. Confirm deletion.
6. Disconnect the USB cable if connected.
7. Reinstall with the disc that came with the printer.
I hope this helps.

HP Printer Driver Photosmart C4480 All-in-One printer

I recently upgraded my MacBook Pro, Retina, 13 inch, Late 2013, 2.4 GZ Intel Core i5, 4Gb 1600 Mhz DDR3, 89.04 GB free of 120.11 GB
to OSX Yosemite (from Mavericks 10.9.5) . HP does not have a driver for my workhorse printer, HP Photosmart C4480 All-in-One. The HP website suggested I see if anyone could recommend a work around or reliable alternative download. Thanks in advance for your help.

This did not help. There was no change in the printing of any documents. I am using an HP Photosmart C4480 all in one printer. Every thing I print from any website when in Firefox as my browser prints this way. Thanks, Gene

Problem with wireless printer HP photosmart by using iPad

How can I use my wireless printer HP photosmart D 7460 with my iPad?
jacques

I don't see your printer on the list of AirPrint capable printers: http://support.apple.com/kb/ht4356. If it isn't AirPrint capapble, the options are as follows:
HP may have an app in the App store that will allow your printer to have limited capabilities (not AirPrint).
One or more of the 3rd party printer apps in the Apps Store may work with your printer (again not AirPrint).
Download a 3rd party program to your PC/MAC that will allow you to use shared printers as if they were AirPrint capable. Your iPad will see the printer as an AirPrint cabable printer, but the PC/MAC the software is installed on must be up and running. A few such programs are Printopia, AirPrint Activator, FingerPrint by Collobos.

External Hard Drive to be used with windows and Mac

I shall paint the picture;
I have a very nice mobile hard drive on it's way to me, and I shall be upgrading to leopard at some point soon after receiving it, my MBP has a 120gb internal HDD and the external on it's way is 160gb .
I will be using it as a time machine HD , but will also be using it to transfer from my mac to college/university PCs.
So, do any of ya'l out there know a good way of going about it? My thoughts are along the lines of creating a separate windows/mac partition because Time Machine I assume uses HFS+ and as far as I am aware, windows is unable to use this.
I am not 100% sure on this so any help or corrections or indeed alternate solutions are welcome.
Only requirements are that it's with my MBP and G-Tech G-Drive mini only, no extra bits and bobs.
Thank you in advance

A 160 GB drive may be a bit small to use to back up a 120GB drive with TimeMachine... and have a separate partition to use for Windows files. While your MacBook Pro's 120GB drive may not be close to full yet... it will likely continue to grow in time. TimeMachine keeps multiple copies of files that you change allowing you to go "back in time" to various points. It will use as much space as is available on the drive. You may want to keep a larger external desktop drive for your TimeMachine backup... or dedicate your entire 160GB to it.

How to restrict "Open Applications" window from showing C drive? Or use the Windows Explorer "Open" Window?

Hi, Im new to JDeveloper and I work in a school which requires restriction of the C: Drive. Does any one know how I can either stop the "Open Applications" dialog from showing this drive or Use the Windows Explorer "Open" dialog window to browse files, the drive has been hidden and restricted using GPO but JDeveloper shows the C: drive?
Any help is much appreciated.

Hi and thanks Timo. We are using 12c. On the Windows side of things, we are using Win7 and we have hidden the drives we don't want the user to see using GPO but obviously Jdev then shows these drives in its "Open Applications" Window and allows access. As far as the environmental variable is concerned this is something that I put in place.
Many thanks for your reply and the link to the tech doc.
Nigel

How can i find/ install printer driver hp laserjet 1010 for windows 7

Dear Sir/Madam
I have HP laserjet 1010 Perinter. my operating system is windows 7. my printer driver did't install. how can i find driver or software intall to my computer.
please give me some sjession. or download link
mr mintu
Cell. 8986272527
e-mail - [email protected]

The information available in the following weblink would help you to resolve the problem:
http://h30499.www3.hp.com/t5/Windows-7/hp-LaserJet-1010-driver-windows-7/td-p/1115411
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Does External DVD Drive rm475e work with a Windows 8 Operating System

It worked fine with Windows 7 but doesn't seem to work with Windows 8?

Hello Orchard80,
Thats a good question. You never know about Windows 8.1 and compatability.
There is no driver to download because DVD drives all use pretty much the same generic driver that comes built into Windows already. So I logically one would think that it should work on 8 as well.
The manual states that it is supported from Win-2000 through Win-7 only. But it came out before Win 8 also.
Is the drive recognized in the device manager under CD/DVD drives? Type in Device Manager in Windows 8 Search and select it from the list.
If not, the only thing I can think of is to run the Windows Fix-it Tool to see if it helps.
http://support.microsoft.com/mats/hardware_device_problems/en-us
If it still is NOT recognized after the Fix-it tool, then apperently the drive just will not work with 8.
IF it is recognized in the system but wont work, there is something else we can try but I will wait to hear back from you first.

MSComDlg.ICommonDialog Problem with Windows 64-bit system

Hi all!
I try to use the common Windows dialog box for saving files. For this I'm using the ActiveX-class "MSComDlg.ICommonDialog" with the propertynode input "Filter" for the file types. It's the standard "SaveAsType.vi" (somewhere in the forum).
Everything works fine on a 32-bit Windows system. But when I run the code on a 64-bit system I can not save my file with the last file-extension in the box field. I always get a error-message: "The file name is invalid!" This happens only when the last box-element is selected. All other run normal.
So for example:
If may box array is
Matlab Files (*.mat)|*.mat
Text Files (*.txt)|*.txt
Excel Files (*.xls)|*.xls
and I select to save as *.xls and write as filename "Hello" in, I get on the 64-bit machine the error:
"Hello
The file name is invalid"
When I change the order of the box array *.xls will go but the new last element will produce this error.
So, can someone help me?
Kind regards,
llpauli
P.S. I'm using Win 7 64bit with labview 9 32bit. exe tested on win7 64 bit and win xp 32 bit.

Hi
Im using win 7 64bit. I'm able to register the comdlg32.ocx now but can't use it in labview. There are always error messages.
Which one do you use (see screenshots)
Regards
DianaS
Attachments:
comdlg1.gif ‏38 KB
comdlg2.gif ‏37 KB

Can't install itunes on windows 64 bit system

I tried to install itunes on my 64 bit machine, but with verson 6.0.5, it says this software doesnt support 64 bit systems. I tried to install an earlier version i think its 6.0.4.2 not sure, but it does install on my computer. When I try to open the program and quicktime, I get error box saying the program had a problem and couldn't open. Is there anyway to fix this problem, and is there a way to have the newest version of itunes to work on windows 64 bit?
Windows XP Pro

iTunes and QuickTime have never been supported on the 64-bit version of Windows (look here for the official statement). Some people have managed to get it working (at least tolerably), but from what I've read, a recent update from Microsoft has caused a lot of problems. You might try rolling back recent Windows updates and see if you can get things working again.

Printer driver Photosmart 1315 used in Windows 7 - 64 bit system

Similar Messages

Maybe you are looking for