Printer driver s for Canon i70
I have a G4 powerbook and I also have a Canon printer i70 and it has been used a bit when I travel - on various computers. I want to add it to this Powerbook but I cannot find a driver on the web. Lots of efforts to sell me driver doctor and so on, and lots of microsoft stuff but nothing that works for me. ~I am not ready to throw it away - it worked very well and is in good nick - so where can i get a driver please? ~ Thanks
This seems to be the correct one from the Canon site:
Canon BubbleJet i70.
You may have to select the right OS if OSX doesn't come up at first in the linked page
Similar Messages
-
Printer driver required for canon
recently i have purchased canon printer lpd2900b i am not able to used it because i don't have driver of the printer. is there any solution ?
Is this your printer?
http://www.canon-europe.com/Support/Consumer_Products/products/printers/Laser/i- SENSYS_LBP2900B.aspx?type=download&page=1
It is only directly supported for Windows. But if you have the optional Server, it may work as a Netork printer. -
I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.
Hold down the option key and select
▹ System Information...
from the menu bar. In the window that opens, select
Hardware ▹ USB
from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown? -
HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit
Hello,
For some time now I have been unable to scan or print from my desktop (Windows 7 Professional 64bit) and I have exhausted too much effort and am now bringing it to the masses.
The problem:
Printing: Currently receiving an "Error - Offline" message in my printer queue at all times.
Scanning: Scanning has never fully worked on this desktop. I am always unable to communicate with the printer. (Though webscan works through accessing the printers IP address)
Things I have tried:
Ran HPPSDr, followed directions (Unpluged power to printer, turn back on, restart computer) brings me to this website after it cannot fix. (Note that while the HPPSDr is running it always notions that there is a driver problem)
Uninstalled Drivers from CD-ROM, re-installed, countless times
Installed "Windows 7 Pro 64 bit drivers" from the HP website and uninstalled, countless times.
Attempted to set a static IP and use "Update IP Address" to point specifically at the printers IP.
Installed Drivers and finding the printer myself through it's own static IP address.
Turned off firewall and attempted to print (after reboot), same errors
Setting up the printer on all of my laptops (3) wirelessly to attempt to find if there is a problem with the printer or static IP. (1 is Windows VISTA 32bit and the other 2 are Ubuntu 32bit). All laptops are able to use the printer wirelessly without any problems.
Read all of the forums about this issue and attempted all of the 'solutions'. Although I mostly don't see that anyone with this same problem is resolved, unless I'm missing the perfect post.
Things I have not tried:
Plugging the USB directly into the desktop. (This seems self defeating as the purpose for this printer was to be able to print wirelessly to it from across the room)
Re-installed Windows 7 Pro 64bit (Trying to avoid this, would rather just print from laptops)
You tell me
Curiosities:
I have noticed strange things that make me believe the driver is somehow incomptable with my OS. Here is a shot of the properties of the printer:
Weird that it is not recognizing the model number.
Also in the Printer Settings when I go to the port tab, there is no port selected, if I try and tab away it forces me to select a port, yet when I do and 'apply' and then re-open the Printer Settings in the ports tab; it has again unselected the previously selected port.
Theories:
I feel like my OS is just refusing to notice the IP address for the wireless printer, no matter what I have it set to, even if it's dynamic. It's like the driver for Windows 7 Pro 64bit is actually not the correct driver for my system.
Anyways, another thing to mention is that I am not currently willing to wipe my operating system and re-install Windows 7 Pro in order to resolve this just yet. I want to see if anyone else has any other avenues I can try before even beginning to consider that.
Anyways, thanks in advance for taking the time to read my ramblings and hopefully someone who has resolved this issue can help me.Hi Zerosouls,
I understand you are having an issue with HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit.
First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
Restart the computer after this step and try installing Hp Officejet 6600 again.
Please let me know what happens
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Printer Driver Support for Computers Running Windows 8 Release Preview
Printer driver support for computers running Windows 8 Release Preview
HP is working to help customers have the best experience with HP printers connected to PCs running the final release of Windows 8. The pre-release time is a development period when HP develops and tests printer driver solutions. HP’s current plan is for Windows 8 compatible printers to be available when the new operating system is released to the public. HP is working with Microsoft to include drivers in the Windows 8 operating system for HP printers introduced in recent years.
There may be a variety of sources for a printer driver/solution for your HP printer on a computer running Windows 8 Release Preview.
inOS:
An in-Operating System (inOS) driver is a basic driver that is included within the operating system. You do not need to download or install any software from HP. Windows 8 Relase Preview contains several inOS drivers. If an inOS driver is available for your printer, you will have at least basic print capability with USB and Network and basic scan capability with USB only (if your printer supports scanning).
Windows Update:
There might be a more functional or more up-to-date driver available for your printer through Microsoft Windows Update. If Windows Update is enabled, then the Windows Update process activates automatically when you connect (USB and Network connections) the printer to the computer. It searches online for the most recent print driver on the Windows Update site. If the online driver is more functional than the currently installed driver in Windows 8, the computer downloads and installs this driver.
HP Supplied Printer Driver/Solutions:
Although HP does not formally support any pre-release versions of Windows Operating Systems, including Windows 8 Release Preview, we may supply some full functionality drivers* prior to the official release of Windows 8. These drivers may be supplied as a courtesy to our valued HP customers through this Support Forum, though no formal support will be available otherwise. We welcome feedback within these support forums. Please check back for further updates as the official release of Windows 8 approaches.
* Full feature drivers provide full product functionality, plus valuable software to help you get the most out of your printer.Hi vireshr,
Check out the following thread.
http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/How-to-Get-Your-Inkjet-Printer-Working-with-W...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution" -
Downloaded Canon printer/scanner drivers for Canon PIXMA MP520 and MX860 on Mac Book laptop, and they worked. However, when I downloaded the same two drivers on Mac Book Air, neither worked.
I wasn't aware that VueScan charged a yearly license.
You simply launch Image Capture and if the scanner is recognized it will be listed in the SHARED list in the left display column. Select the scanner name and the app will start an overview scan. You will also see a list of scanning options in the right display column (resolution, paper size, file output format, etc.
The above description is when everything is working correctly, which has been the case for me.
Good luck. -
Print driver host for 32 bit applications has stopped working
I just bought a Hp ENVY 7640 printer. I cannot use the wireless printing on my 64 bit computer, with Windows 7. I get an error message "print driver host for 32 bit applications has stopped working". I have looked into all of your online support solutions and nothing I have tried has fixed the problem.
Was there any resolution to this issue? We have a user with the same issue. The details of the error are:
Problem signature:
Problem Event Name: APPCRASH
Application Name: splwow64.exe
Application Version: 6.1.7601.17777
Application Timestamp: 4f35fbfe
Fault Module Name: mxdwdrv.dll
Fault Module Version: 0.3.7601.17514
Fault Module Timestamp: 4ce7c883
Exception Code: c0000005
Exception Offset: 000000000004e891
OS Version: 6.1.7601.2.1.0.18.10
Locale ID: 1033
Additional Information 1: 0f86
Additional Information 2: 0f86ddcc0aa605af31ef1b7f5abedf57
Additional Information 3: 539e
Additional Information 4: 539e0f43d86d39f144fdb012e341ed8d -
Print(Driver) Program for HRTMC_TALENT_PROFILE_PDF
Hi Friends,
Can anyone please help me to find out the Print(Driver) Program for the adobe form .HRTMC_TALENT_PROFILE_PDF.
Like scripts will be maintained in NACE where driver program and form will be maintained for Adobe Form?
Regards,
SreeHi,
have a look at table <b>TNAPR</b> to check the print program assigned to your smartform/sapscript.
Best regards. -
A few days ago, Software Update showed a printer driver update for HP so I installed it. Now, after everything that I print, I get an extra page that just has "2345X" printed on it. I tried reinstalling the driver update but still get the extra page. Anyone know how to get stop this extra pgae from printing?
Hello charliemun,
What I suggest is to reset the print system, click the link below to proceed:
http://support.apple.com/kb/HT1341
Once you have reset the print system please make sure you are selecting the HP Driver and not the Airprint driver (see picture below)
Please let me know if this has resolved the error of the extra page with the numbers on it, or if you require more assistance.
Thanks,
**HevnLghHP**
I work on behalf of HP -
Change print driver settings on canon printer to select one or two sided printing
My Canon print driver prints double sided by default. I want to change to single sided, or be able to select single or double on a per document basis. How do I change my print driver settings?
Here is the solution I used.
The Print driver for Canon, UFRII will default to double sided printing.
Select a document, and select Print.
Open Presets and select Show Presets (this step may not be necessary)
Open Layout, then open Finishing. Change Prunt Style to One side or one page
Open Presets and Save Current Setting. At this point you can change the name of the preset (one page) and select if the chafe is for only the selected printer or all (Canon) printers.
This sure seemed harder than it should be. -
Printer Driver needed for Windows 8.1 Computer
I just bought a new computer and I need printer driver for HP Photosmart C4380. I am runing windows 8.1 so I can install my printer.
@KRS26
Welcome to the HP Forums!
I am here to help you find the drivers for your Photosmart C4380 to install on your new PC.
Click this link, download and follow the installation instructions and you should have your printer installed in no time: HP Photosmart Full Feature Software and Drivers
I hope that helps, have a great weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Printer Driver issue for CM1312nfi MFP
I have a MFP CM1312nfi, which has worked great when using OS Windows XP, recently upgraded to Windows 7 Home Edition and downloaded the complete driver from HP - unable to get the printer to print in anything other than mono. Totally unable to print colour or install the fax device and scanner.
The device worked perfectly on Windows XP but since the upgrade nothing will work apart from basic mono printing.
Anyone else had the same issues and if so what drivers are required to correct this?
ThanksHi,
If you are printing using HP Universal printing PCL6, right click on it from the Devices and Printers screen and select Properties.
Click the Device Settings tab change the Device Type from Automatic to Color.
Click OK and try printing again.
To fully resolve the issue, a such is likely to be caused due to a conflict with the preinstalled HP UPD drivers on your system, fully removew the software and reinstall it as following:.
First unplug the USB.
From the start menu select Programs > HP > HP Color Laserjet CM1312 and follow the Uninstall.
Once you are done uninstalling, download and follow the HP UPD installer below:
http://ftp.hp.com/pub/softlib/software12/COL40842/ds-99353-10/upd-pcl6-x32-6.0.0.18849.exe
Select USB Mode (Plug and play).
Keep only the 1st checkbox checked to remove any installed UPD driver, Uncheck the 2nd box to reinstall the latest version - that will fully scrub the UPD drivers from your system.
Once the process completes go to Devices and Printers and ensure there are no longer any HP printers exists.
Left click once on any existing printer (e.g. Fax) and select Print Server Properties from the top menu.
Open the Drivers tab and ensure there are no HP drivers exists.
If there are any, delete it by selecting the second option to remove the device and its software.
Once you are done reinstall the latest software and follow the steps to reinstall the software (if you already hae the specific file on your PC simply run it again):
http://ftp.hp.com/pub/softlib/software12/COL31138/tw-77243-2/CM1312series-win7-full-solution-AM-EMEA...
Once the installation prompt to conenct the USB, connect the cable and double click the Installing Device Software icon on the system tray:
From the shown dialog, click the bottom line to skip Windows Update if a such appear and allow it to complete any device installation, once it is complete click on Close and allow the installation to complete.
Now try printing and check for any difference.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Print driver host for 32bit applications - Stopped working
Hey everyone, when I print to the Adobe PDF Converter print driver it will become unresponsive. It might work for 4 or 5 print jobs and the crash. This happens when printing from Illustrator CS5.5, IE9 and Visio 2010.
What normally happens is I will choose "print" then select "Adobe PDF" as the printer, the print progress bar comes up but not the explorer window where I choose to save the PDF. The Illustrator/IE/Visio crashes.
The only way to be able to print again is to logout and log back in to the machine. I've read some others re-starting the splwow64.exe but I haven't tried that.
I'm running a Windows7 Pro, 64-bit, SP1. Adobe Design Premium CS5.5, Acrobat X Pro. Everything is updated to the latest version.
Any ideas? Adobe?
Description
Faulting Application Path: C:\Windows\splwow64.exe
Problem signature
Problem Event Name: BEX64
Application Name: splwow64.exe
Application Version: 6.1.7601.17514
Application Timestamp: 4ce7b4c8
Fault Module Name: StackHash_fa82
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 0000000000000000
Exception Code: c0000005
Exception Data: 0000000000000008
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 4105
Additional Information 1: fa82
Additional Information 2: fa8239828219b93f26dde8c1e098c60b
Additional Information 3: fa82
Additional Information 4: fa8239828219b93f26dde8c1e098c60b
cheers
CamHey everyone, when I print to the Adobe PDF Converter print driver it will become unresponsive. It might work for 4 or 5 print jobs and the crash. This happens when printing from Illustrator CS5.5, IE9 and Visio 2010.
What normally happens is I will choose "print" then select "Adobe PDF" as the printer, the print progress bar comes up but not the explorer window where I choose to save the PDF. The Illustrator/IE/Visio crashes.
The only way to be able to print again is to logout and log back in to the machine. I've read some others re-starting the splwow64.exe but I haven't tried that.
I'm running a Windows7 Pro, 64-bit, SP1. Adobe Design Premium CS5.5, Acrobat X Pro. Everything is updated to the latest version.
Any ideas? Adobe?
Description
Faulting Application Path: C:\Windows\splwow64.exe
Problem signature
Problem Event Name: BEX64
Application Name: splwow64.exe
Application Version: 6.1.7601.17514
Application Timestamp: 4ce7b4c8
Fault Module Name: StackHash_fa82
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 0000000000000000
Exception Code: c0000005
Exception Data: 0000000000000008
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 4105
Additional Information 1: fa82
Additional Information 2: fa8239828219b93f26dde8c1e098c60b
Additional Information 3: fa82
Additional Information 4: fa8239828219b93f26dde8c1e098c60b
cheers
Cam -
Error "print driver host for 32bit applications has stopped working"
Got this error when trying to "print" a gmail message to a pdf file. After some research (trial and error) I found that in my case this message is due to the subject line of the message generating an invalid Windows file name. Using the subject line to generate the filename is how GMail decides to generate the file name. I guess this is as good a strategy as any. I cannot think of a better strategy for GMail (would not want that "feature" changed).
Solution: Forwarded message to myself with a subject line that does not generate an invalid Windows file name and then "printed" that forwarded message.
Software: Adobe Acrobat Pro. OS: Win 7 64-bit. Application: Chrome accessing GMail. But I conjecture that this error message is not dependent on the specific configuration I have. For example, I recall having a failure when trying to do "print" a GMail message under 32-bit vista though I do not recall the error message (was very likely different :-). In that case I copied the message into Word and moved on leaving it as a mystery.
Adobe solution (I suppose) is that Acrobat (distiller) needs to check the validity of the Windows file name and give back a rationale error message before passing to the OS.
Hope this helps somone out there.I am having the exact same problem. I have Windows 7 Pro 64-bit and Design Premium CS 5.5. InDesign is the ONLY program that will not print to any printer. I get the "Printer selection failed." error every time I select any printer, even the Adobe PDF one. I have a Brother printer, an HP Plotter, and even an Oce copier/printer. InDesign gives the error no matter what printer is selected form its own list. Photoshop and Acrobat do not give me any issues, nor does any of the MS Office programs nor Autodesk softwares. It's only InDesign that fails. Reparing doesn't do anything and reinstalling every printer driver is pointless because it's only InDesign that produces the error.
Does anyone know what to do to fix this? -
Print driver host for 32 bit app has stopped working
Using Windows 7 64 bit. The printer is an HP Laser 1200. The 64 bit driver for the printer would not work, so I switched to the hp 2200 64 bit driver and the customer was able to print out of his CAD program and Excel.
However Adobe Reader is a different matter. He got the message "print driver for the 32 bit app has stopped working" and printed out 3 blank pages. Then he tried to print again, didn't get the message, and didn't get the blank paper. In fact, he didn't get anything.
Of course, there is no information on the HP website. Any ideas on what could be the problem?
ThanksWas there any resolution to this issue? We have a user with the same issue. The details of the error are:
Problem signature:
Problem Event Name: APPCRASH
Application Name: splwow64.exe
Application Version: 6.1.7601.17777
Application Timestamp: 4f35fbfe
Fault Module Name: mxdwdrv.dll
Fault Module Version: 0.3.7601.17514
Fault Module Timestamp: 4ce7c883
Exception Code: c0000005
Exception Offset: 000000000004e891
OS Version: 6.1.7601.2.1.0.18.10
Locale ID: 1033
Additional Information 1: 0f86
Additional Information 2: 0f86ddcc0aa605af31ef1b7f5abedf57
Additional Information 3: 539e
Additional Information 4: 539e0f43d86d39f144fdb012e341ed8d
Maybe you are looking for
-
Changing document restriction in Adobe Reader using JavaScript
Hi all, I'm wondering if it's possible to change the "Commenting" document restriction option of a pdf file with "No Security" as the security method, using JavaScript while in Adobe Reader. Thanks in advance, Kamil
-
How do i listen to webcasts that are cast in windows media?
tried to download windows media, but i am not sure i am familiar w/ how to download on a mac...i am a new user any suggestions?
-
IBooks: How do you sort books into categories?
Thanks in advance.
-
Pass selected line data of tableView from controller's method to page
Dear Friend. Could you please suggest me How I will pass selected line data of tableView from controller's DO_HANDLE_DATA method to Page. I have a tableview in that I am able to read "npa_sarea = table_event->row_key". I want to pass npas
-
Jpeg encoding with imageio - pink distortion problem
Hello, I am using the imageio classes to scale down jpg images (for thumbnails) and write them to a file. On most images, everything works perfectly. On some images, however, the resulting thumbnail image has a strange pink coloration to the whole pi