Printer Driver

I have used an HP LaserJet 4100n for years with an Intel MacPro runnning 10.6.8. Apple keeps pushing new printer drivers at me through software update and I go to great lengths to stick with what works. After a recent crash, my old driver (version 7.1 I think) disappeared and I can no longer find a link to the old driver. HP was no help whatsoever and told me that Apple is removing web links to legacy drivers. Anybody know where I can get a driver that works with my Snow Leopard system? FYI, I can print fine with a late 2013 iMac running Mavericks but I have a huge inventory of legacy files and need to print from the MacPro from time to time.

Google has over a million hits for hp legacy drivers. Where exactly did you search?
I found this right on HP website - legacy drivers

Similar Messages

Printer driver for workforce 645 was updated yesterday and printer no longer works, driver is no longer available from apple or epson.l

When i go to the epson website it says the printer driver is available from apple. When i go to the printer selection it sees the printer but says that apple has no drivers for this printer. In the updates section of the app store it shows that the printer driver was update yesterday.

If you're sure you tried all of these steps and the issue persists, contact Apple technical support
Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).

HP Laserjet 4100n network printer driver fails to install

I am trying to install the printer driver for an HP 4100n laserjet on an XP machine. I have downloaded the file "hp LaserJet 4100 Printing System (61.3 MB) from the HP web site. First issue is that upon executing the setup exe file the InstallShield stops at 99%. I have to end it via Windows Task manager. Occassionally I can get to 100% but I have no idea why only occassionally. If I boot into Safe Mode I get to 100% everytime.
Once in Safe Mode the wizard seems to operate properly, finding the printer on the network and returning the correct TCP address. I get to the end of the wizard and I get a Sever Error message and the wizard terminates.
I have two laptops and one other desktop connected to the 4100n via the network. I must be doing something wrong and could use some suggestions.
Thanks

Hi Cupcakekid,
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Is there a Macintosh OS 8.6 or 9.0.4 printer driver for an HP PSC 2355?

Dear Ladies and Gentlemen:
I know this is very old {don't laugh}, but I was looking for a Macintosh OS 8.6 or 9.0.4 printer driver for my recently purchased HP PSC 2355 All-in-One printer.
I run OS X 10.5.8 on an Apple iBook G4 and also run a Mac OS 9.0.4 emulator on it called SheepShaver. Trouble is SheepShaver will only run up to Mac OS 9.0.4 and the HP PSC 2355 minimum drivers are for Mac OS 9.1.
I would love to be able to print from SheepShaver and the scanner features are unimportant to me under Mac OS 9.
Are there printing drivers (even from a different, but compatible printer) that would allow me to print from this printer under Mac OS 9.0.4?
Thank you so much!

Hello,
When you say you recently purchased the PSC 2355, i believe this is a very old printer.
I am not sure on how the SheepShaver works but we do have the printer driver available for 10.9 on hp.com. The first link mentioned below will take to the product page. Rest all are some of the InkJet and DeskJet drivers.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=13&lc=en&cc=us&dlc=en&sw_lang=&product=422000...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?lang=en&cc=US&swItem...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?lang=en&cc=US&swItem...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=dj-13822-2&cc=us&dlc=en&lc=en&...
Thanks
Although I am an HP employee, I am speaking for myself and not for HP.
Say thanks by clicking the "Kudos! Star" which is on the left
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue

How to Install 64-bit "Generic / Text Only" print driver on a 32-bit Windows 2003 Server?

Hi All,
In a nutshell, I need to Install the 64-bit Generic / Text Only print driver on a 32-bit Windows 2003 Server’s “Generic / Text Only 32-bit print queue.
The problem is that there is no Driver-Disk to get the drivers. I’ve been able to isolate 14 files related to the 64 bit drivers from a Windows 7 x64 computer and copy them to a temp folder on the Windows 2003 x32 server. When I try to add the 64 bit driver
to the Windows 2003 x32 server, it wants a *.inf file, which I don’t have and can’t find.
Because Microsoft will no longer support Windows XP, my client is replacing all of their Point-of-Sale Windows XP x32 systems with Windows 7 x64. They use Terminal Services (Remote Desktop) to connect to a Windows 2003 x32 server to use the POS system. The
POS software redirects LPT1 back to the local Generic / Text Only printer. This works great for XP x32.
When we use the Terminal Services POS software on the new Windows 7 x64 system, none of the labels print out because it’s redirected in 32-bit back to the local Windows 7 x64 Generic / Text Only 64-bit printer.
This will be a huge issue for me if I can’t get this to work.
Thanks in advance for any suggestions and help! -Rob

those may be helpful...
http://social.technet.microsoft.com/Forums/en-US/a129f49a-0216-41f0-b190-3efb46fbb8ac/generic-text-only-driver-on-windows-2008-server-r2?forum=winserverprint
http://blogs.technet.com/b/yongrhee/archive/2009/09/14/how-to-add-64-bit-print-drivers-on-32-bit-windows-server-2003-or-windows-server-2008-print-server.aspx
Best,
Howtodo

Adobe PDF Printer not working as print driver; 9.5.5 (pro) with Windows 7, 64 bit

I have installed, repaired, uninstalled and re-installed Acrobat Pro 9.5.5 on a newly formatted SSD with Windows 7, 64 bit on my desktop machine. The program was installed from Acrobat Pro 9.0.0 and updated within the program. I have the program also installed on my laptop, and the Adobe PDF Printer driver is working properly on my laptop.
On my desktop with the newly formatted SSD, the Adobe PDF printer driver is not working. Note that I am using the printer driver, and not any pdf creation techniques within MS Office or other programs.
When I go to the Adobe PDF printing preferences on my desktop, I only get a generic, two tab window open. When I print a file to this printer on my desktop machine, I do not get a window opening that asks where to create the pdf or what to name it, and I never see any files created. In MS Word, the Create PDF option under the Acrobat tab works and opens a dialog to ask the name and location to save, and then opens a PDF Maker progress window and properly creates the file. I can also save a file as an .eps or .ps file and use Distiller to create the pdf. However I cannot get the Adobe PDF printer driver in my Devices and Printers to work properly, although it works just fine on my laptop with the same program (Pro 9.5.5) and same Windows version (7, 64 bit).
Repairing, uninstalling and re-installing does not solve the problem. Acrotray.exe *32 process is running. Any ideas on why this won't run properly on my desktop, but will run on a similarly configured laptop?
On my laptop, I get a full, (7) tabl menu with all the normal options:

I found this answer from Deepak Chauhan on another forum, and it solved this problem!
Try this to add Adobe PDF printer manually on Windows 7, and Windows Vista.
If windows 7 is Enterprise or better edition: (Admin rights required)
Start>search for printmanagement.msc and open the print management module
Expand the print server and expand the computer name to see availbale printers, drivers and printer ports.
- from printers ensure there's no Adobe PDF printer, if there is delete it
- go to ports and delete the PDF ports (the ones ending in *.pdf)
- go to drivers and delete the PDF converter.
Take note if any errors occur, but continue with the following steps regardless.
If on windows 7 home edition, just goto start>Devices and Printers and ensure PDF pritner is not listed.
Then open the registry (if any erors deleting these keys happen, see below)
1: go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Printers
delete any adobe PDF printer subkey present
2: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors
delee the PDF port monitor if present
3: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers
again delete and pdf printer subkey
If any erros occur, you need to set the owner of the key to the currently logged in admin user, then ensure that user has full control.
Do this by right-click the key and selecting permissions, clicking on advanced, then the owner tab.
Once you've all that has been done, open a command line as administrator.
Copy and pate the following commands in order
1: net stop spooler
2: rundll32.exe setupapi.dll,InstallHinfSection AdobePDFPortMonitor 128 C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf
3: net start spooler
4:rundll32.exe printui.dll,PrintUIEntry /if /b "Adobe PDF" /f "C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf" /r "Documents\*.pdf" /m "Adobe PDF Converter"
That should set back the pdf printer.
This seemed to provide the link that provided the Adobe PDF Settings tab to the Adobe PDF Printing Preferences that was missing!

HP Cloud Print Driver for Windows Server 2003?

Hello,
I have a unique (complicated) situation that I am trying to find a solution for.
Here is the deal,
My company is trying to set up a temporary remote branch location inside a building where we are unable to wire a network. Our solution is to use a wireless hotspot. Connected to this hotspot, we will have an iPad and an HP Laserjet M525.
The iPad will be connecting to our Citrix environment over VPN through Citrix Receiver to deliver a desktop interface to the iPad. This is needed to access a few applications that are used at the branch.
The problem now is printing, AirPrint wont work because the iPad is on VPN (and its at a windows interface, not the iPad's).
I had the idea of using the HP printers built in ePrint function to print, so I set that up. So now sending at email to [email protected] prints to the HP printer attached to the wireless hotspot.
Emaling to print works, but ideally, I would like this printer to show up in the Windows Devices and Printers, so that the user can just click print, choose the HP printer, and it will print, (with a delay obviously as its sending an email).
So I downloaded the HP ePrint Windows Driver, which has to be installed on the main Citrix servers so that the users session can grab the printer and use it, turns out the driver doesnt work on Windows Server 2003.
My first attempt at a workaround was Google Cloud Print, which was fairly simple to connect to HP ePrint, but apparently the Google Cloud Print Driver doesnt work on Windows Server 2003 either.
Is there a version of the HP ePrint Driver out there that works on Windows Server 2003?
tldr:
I would like to print to a remote HP printer that is connected to a wifi hotspot from our internal network. I need whatever software I download to be compatible with Server 2003.
I understand this is over complicated but thanks for any input.

I believe I understand your issue. You would like to use a print driver to print to your HP ePrint enabled printer from your apps that are hosted by Citrix server. While I believe this makes perfect sense, HP does not have a print driver that officially supports MS TS or Citrix that also supports the ePrint Cloud path. The reason for this is the ePrint windows driver is a "dynamic" print driver (similar to HP UPD dynamic mode) that handles multiple print paths (tcp/ip, wireless direct, cloud, etc) in a single driver instance by dynamically changing the port the print queue is bound to so the port is specific to the delivery path. For example, if printing to a network printer it will use a MS Standard tcp/ip port. If printing to the ePrint cloud a custom port is used, etc. Well, if you have lots of Citrix users trying to print to a single print queue, but to different destinations, the users would be colliding with each other when they print by having the driver trying to change the print queue to different print ports at the same time.
What you could do is install an ePrint print queue on the citrix server if you can control the access to that queue to just your local branch users. Also, if you only have on ePrint enabled printer the situation is even better as only one port will be needed by that queue. You can find the ePrint software at www.hp.com/go/eprintsoftware You might want to download the version of the driver that supports XP as Windows 2003 is very similar print system.
NOTE: this is not a supported environment for this driver. You would be using it without warrenty or support and no promises are being made here.
Good luck if you choose this path and please post back the results. Thanks!

Using both Gutenprint and HP printer driver

I have a HP Laserjet 3200 B&W connected by USB to my Macbook. Occasionally I would like to scan and print in color using my wife's HP G85 AIO. The 3200 prints great using Gutenprint (and not at all with the HP printer driver). I can scan on the G85 using USB if I install the old HP G-series driver for it (v. 7.3.1 from 2005). When I move back to the 3200, however, I can't print on it (message: "Generic Class: Waiting for Device") until I uninstall the HP driver and related software for the G85.
I know these are old printers, but they still work great. I don't mind carrying my Macbook from printer to printer, but having to install and uninstall drivers is too much bother. What solutions have other people found? Surely someone has experienced this problem and found an answer!
Thanks!
dimoco9

dimoco9 wrote:
When I move back to the 3200, however, I can't print on it (message: "Generic Class: Waiting for Device") until I uninstall the HP driver and related software for the G85.
Try unplugging the USB connection for the G85. That might stop the HP software from blocking the 3200.
Matt

Print driver for hp officejet 6500 unavailable with Windows 8.1

I have an Asus laptop running Windows 8.1. Every few days I can not print on our Officejet 6500 e709n. The message says the print driver is unavailable. I must then uninstall and reinstall the print driver. We have a Dell laptop running Windows 7 and a Macbook also connected wirelessly that we have no problems with this issue. How do I correct the issue so I do not have to uninstall/reinstall every few days?
Thanks.

Hi,
Where do you install from ? Please try the following driver (dated Aug-28-2014):
http://ftp.hp.com/pub/softlib/software12/COL31304/mp-110035-2/OJ_AIO_6500_E709_Full_Win_WW_140_408-4...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

Unable to load HP 8600 printer driver on laptop

Hi Folks,
Just installed a new HP Officejet 8600 printer into my home network. The network consists of 4 PC’s, two desktops and two laptops…all are running XP SP3 with the latest updates. The HP printer and one of the desktops are connected by Ethernet to a wireless router. The other desktop and both laptops are connected wirelessly via 802.11. Installation of the printer driver was successful with both desktops and one of the laptops. The other laptop, a Dell Latitude D520, fails on the final step of the installation process, after selecting the printer name following its detection on the network. Avast! Internet Security and Malwarebytes run on all the machines and are disabled, along with Windows firewall, during the install process. The following dialog is displayed:
“Unsuccessful Network Installation – The printer was unable to be installed over the network.”
No other error information is provided. I’ve tried installing from the product CD (which is up to date) as well as the driver software downloaded from the HP support site, rebooting multiple times. I also downloaded the recommended HP troubleshooting tool (HP Installation Failure – Unknown Device) and ran through the process a couple of times without success. All of the machines, including the D520 laptop, can see each other as well as the HP printer. There are no network issues I’m aware of.
I’ve exhausted what little expertise I have in this area. If anyone out there can think of a possible solution or provide some suggestions, I’d sure appreciate it. Thanks much.

Hello marconi10. Welcome to the HP Forums. I understand you are unable to install your printer on one computer, over a wireless connection. I'm going to suggest a very simple workaround, which if it works, will remove any complicated troubleshooting that would be necessary:
Please try installing the printer with a USB connection. If this does not work, you know that there is an issue occurring with the computer.
If this does work, the printer will be successfully installed. At that point, you can change the connection type from USB to wireless. For more information on how to do this, please reference this HP document: Convert from a USB connected printer to wireless
If the printer will still not connect wireless, this will point out a computer issue. For additional information and troubleshooting, relating to the inability of installing the printer over a wireless network, please reference this HP document: 'Unable to Find Printer' Error Message Displays on the Computer During Wireless Network Installation
Please respond with the results of your troubleshooting. I'm only here to help!
Mario
I worked on behalf of HP.

Unable to load Canon MP160 printer driver

I've had the hardest time using my Canon MP160 printer on my iMac (Mac OS 10.5). In fact, I'm not able to print at all.
I have the printer connected via USB. It always has been. However, it only stopped working recently.
I downloaded the drivers for the printer and scanner from Canon's web site. However, when I attempt to load the printer driver, the "Installing Canon IJ Printer Driver" window appears. It gets to the "Finishing Installation" part in the process. But it "hangs" at some point and does not complete. I've tried it twice. It hung at two different points in the process. I tried letting it run overnight. That was no good.
I've also looked for the "Printer Setup Utility" and can't seem to find that anyplace. I'm wondering why I can't find that.
If anybody could help me solve this, I'd be so thankful.

Hello marconi10. Welcome to the HP Forums. I understand you are unable to install your printer on one computer, over a wireless connection. I'm going to suggest a very simple workaround, which if it works, will remove any complicated troubleshooting that would be necessary:
Please try installing the printer with a USB connection. If this does not work, you know that there is an issue occurring with the computer.
If this does work, the printer will be successfully installed. At that point, you can change the connection type from USB to wireless. For more information on how to do this, please reference this HP document: Convert from a USB connected printer to wireless
If the printer will still not connect wireless, this will point out a computer issue. For additional information and troubleshooting, relating to the inability of installing the printer over a wireless network, please reference this HP document: 'Unable to Find Printer' Error Message Displays on the Computer During Wireless Network Installation
Please respond with the results of your troubleshooting. I'm only here to help!
Mario
I worked on behalf of HP.

Unable to load HP printer driver-Error message!

Hi,
Just wondering if anyone can be of any assistance.
I recently purchased a HP Photosmart 2575 all-in-one printer and installed the necessary software, which said it was successfully installed. However, whenever I boot up the G3 I keep getting the following message 'Unable to load the printer drive, open the applications Get Info dialog and increase the preferred memory size. If this does not help try quitting all other applications or reinstalling the printer software.'
After clicking ok on this message about four times the message goes and I am able to print fine. Just wondering why this is happening. I have increased the memory allocation and also turnt on the virtual memory to see if this makes any difference, but all to no avail. I have also uninstalled and then reinstalled the software to see if this makes a difference, but that didn't help either.
Any help would be greatly appreciated.
Thanks in advance
PS: The printer is connected via ethernet on my router to enable me to print from another machine

Use Techtool Lite or Trash*Desktop (TD may delete Finder comments )to rebuild your desktop w/extensions off. Does a better job than manually & you avoid all the finger gymnatics. You just have to hold down the shift key to shut off extensions.
Restart to turn the extensions back on again.
If you want to rebuild manually, see KB article http://docs.info.apple.com/article.html?artnum=10182 Rebuilding Desktop File and Icon Recovery.

How to uninstall a printer driver?

In the office where I work with my Mac there's a Canon copier/scanner model iR2318. Months ago I downloaded and installed the Lion compatible drivers required that worked fine.
Yesterday (with no reason, no changes, nothing at all: just working) the printer started to refuse to print as it asked for a different paper format: A4 or Letter. Despite many attempts to specifically send print jobs in A4, which is the paper format loaded in the tray, the printer continued to refuse all prints.
Today I ended up removing the printer from the list, as it became unnecessary, and I also liked to uninstall the printer driver as well, since Canon released a newer version.
Currently, when trying to reinstall the printer, 2 drivers are displayed: UK and US. This lets me assume that those 2 drivers are still installed in my system: I wanted to remove both of them and start from scratch by reinstall the driver and he printer as the system was new.
How can I remove the driver, so that Lion won't recognize it and that I could make a clean install of the previous working printer?
Please…as a former Windows user, the most unwanted answer is "try to recover your system"!

Once deleted those files, when installing a new printer, the list of available drivers still shows the deleted ones. Are they truly available or is the list that has not been updated? And, yes: I restarted my system after deleting the driver folder.

How do I deal with "Acces Denied" error when trying to print to Adobe PDF printer driver

Windows 7 64 bit OS (updated)
Adobe Acrobat XI (11.0.06.70)
I am unable to create a PDF file from within the Windows 7 print dialog. Each time, I receive a terse "Access Denied" error followed by the display below (the progress bar never advances). I thought upgrading to Adobe Acrobat XI might fix this but no such luck. It seems that others have experienced similar issues. I noticed in the display below that Adobe is trying to create the file in a folder which does not exist (at least I can't see it even after setting my preferences to display hidden files). I have the hope that, if the folder were present and accessible, Adobe would create the file without trouble. Is there a way to instruct Adobe Acrobat XI to create this temporary file in a different location? One of my frustrations is that I used to be able to print Adobe Acrobat files without trouble on the same computer. I wonder whether the use of a registry cleaner may have contributed to my problem.
What are the best practices for addressing the Access Denied and inability to print problems I've encountered?
Thanks for any help you can provide in sorting out this problem.
Best,
Matt

I have been having the exact same problem with Adobe Acrobat X. I have uninstalled and reinstalled numerous times and applied all the latest updates. Every time I try to print ANTHING to the Adobe PDF print driver, the software hangs (MS Office, webpage, or other programs). When I finally kill the process using Task Manager, I find the little "Access Denied" box. This has been happening for nearly one year. I have limped along since I have other computers to use. I have attempted to find answers on this forum in the past, and no one seems to have a clear answer to the problem.
I, too, was tempted to upgrade to XI, but Matt's post settled the matter, since it did not help him.
I am using Win 7 Home (64 bit) and until this issue started, I have had no problem with AA X.
Where are the Adobe experts when you need them? Please help us.

Printer driver hangs when printing with Office 2013/Windows 8 64 bit

Printer: HP Color LaserJet CM1312nfi
Printer Driver: V5.1 (up to date, downloaded from HP support website) or Generic V5.6
OS: Windows 8 Professional 64bit
When I try to print a certain Excel document with Excel 2013 and printer driver V5.1, the program hangs and needs to be terminated via task manager. This happens always with the same document, but not with all documents. The program hangs also when opening the print preview for the same document.
The same document prints fine with the generic printer driver V5.6 and with the driver that comes with Windows 8.
The same document prints fine with driver V5.1 under Windows 7 and Office 2010. The combination Windows 7/Office 2013 was not tested. The combination Windows 8/Office 2010 was also not tested.
When I try to print an empty document with Word 2013 and generic printer driver V5.6, the program hangs and needs to be terminated via task manager.
My conclusion is that the HP printer drivers have a problem with either Windows 8 or Office 2013 or a combination of both.
The printer driver that comes with Windows 8 and is automatically installed is useful as a temporary workaround, but it lacks certain options, e.g. manual duplex.
On request, I am ready to send the Excel document by e-mail for verification of the problem.
Any help or suggestions will be very much appreciated.
Thanks in advance,
Uli
This question was solved.
View Solution.

From what you describe you are having issues printing from MS Office. Have you had trouble printing from other resources on your computer (e.g. from the internet or another program)? The first thing I am going to suggest is that we start by uninstalling and reinstalling the printer from the resources available online.
First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3562006&lang=en&cc=us...
Install that and let me know the result!
Have a great day!

Printer Driver

Similar Messages

Maybe you are looking for