Printer Drivers Not Working with Leopard

I downloaded the Oki C5150n driver for Intel Macs and they don't work properly with Leopard. I need to use the bypass feed, but the drop down menu to choose the paper source only drops partway down not allowing any choices.
This is only happening with CS and CS3. The printer works fine with MS Office.
I have the Oki driver on my Macbook Pro and it works fine, but I'm running Tiger on the Macbook Pro.
Any Help would be appreciated.
Thank you,
Homer
[email protected]

Same issues here...same setup. This has been an intermittent issue for some time now. My latest incident was when power was lost during one of the big snow storms. Print jobs hang when going trough Time Capsule (wired or wireless) but are fine if plugged into computers USB port. I have resolved this issue before by following similar steps outlined above, but the solution seem to be hit or miss.

Similar Messages

FCP not working with Leopard

Every time I try and launch FCP5 Studio 2 it gives me the "This application Final Cut Pro quit unexpectedly." Anyone have a solution to this? Anyone else experienced this?
Do I just have to wait for an update?

Having same problem with FCP v 6.0.1 and tried the FCP Rescue 6..... Also does not work with Leopard.
I am just about to try this proceedure.
Delete the User Preferences
You can resolve many issues by restoring Final Cut Pro back to its original settings. This will not impact your project files, but you should verify your Scratch Disk location setting after doing this. To reset your Final Cut Pro user preference settings to their original state, do the following:
In the Finder, go to ~/Library/Preferences—the tilde (~) represents your Home folder.
Remove the “com.apple.finalcutpro.plist” file from the Preferences folder.
Remove the “Final Cut Pro User Data” folder from the Preferences folder.
Will report shortly.

My HP photo smart C6280 printer does not work with CS6. Any Help?

My HP photo smart C6280 printer does not work with CS6. Any Help?

How does it "not work"?
What OS version are you using?

What other hp print drivers will work with the officejet pro 8600

I have an Officejet Pro 8600 and like many others here, I am having a problem printing a custom size envelope (6x9). I did find that I can use the drivers for a deskjet 450 and setup my 8600 using those drivers. However, the 450 6x9 does not have a portait option in the layout.
My question is, what other hp print drivers will work in the 8600? I'm hoping one will have a 6x9 portrait layout?

Cheetah12 wrote:
Hello wingcheck,
Welcome to the HP Forums!
I understand you're receiving a problem printing a custom envelope size (6x9). You did state that you installed a Deskjet 450, but it doesn't come with a portrait option. I will do my best to assist you!
First, I need to find out your operating system on your computer? Windows or Mac?
If you have a Windows computer and using this Deskjet 450 driver, have you checked Devices and Printers on your computer to see if you have this portrait option:
1) Right click on the Deskjet 450, then click on Printer Preferences
2) Very top you should see a tab called "Finishing" and look for Orientation
3) You should see portrait, landscape, rotate by 180 degrees or mirror image.
4) Let me know if you don't have this option on this post
If not, then I would recommend installing a Deskjet 9800 to see if you have this option. Please follow this HP document on Installing an Alternate Print Driver in Windows 7 for a USB Cable Connection. When setting up this custom size, change the paper type to "Other Specialty Media". Please post your results, as I will be looking forward to hearing from you. Have a great night!
Hi Cheetah .... I don't have access to my printer at the moment due to travel, but here's what I have right now. My operating system is Windows 7 64. That's not much, but it is a start. I will have the additional information for you in a day or so. Something else I discovered in the user guide, which I didn't know, is that each tray will only handle specific media. So, when I print envelopes, I will have to use Tray 1 in order to do so.
Now I do have another question for you. Can I have installed, 2 different sets of print drivers at the same time without it causing a conflict? I'm assuming the diffenent driver will simply show up as a different printer in the listed printers, right?? Any way, thanks for your quick response, and upon arriving home, I will follow your previous suggestions. I will also keep you posted as to my success or failure.
Thanks
Paul

My printer does not work with mountain lion

I recently upgraded to Mountain Lion and now my HP Officejet Pro 8600 printer does not work. I downloaded the required driver from the App Store but am still not able to connect. Is there actually a solution for this or do I need to find a way to downgrade my OS to one that is compatible with my printer?

From the HP site:
Compatible operating systems
Microsoft® Windows® 7, Windows Vista®, Windows® XP (SP3)* or higher (32-bit only): *Supports 32-bit only; Mac OS X v 10.5, v 10.6 or v 10.7; Linux (For more information, see http://hplipopensource.com/hplip-web/index.html)
But then also on the HP site they have drivers for the printer for 10.8. See here http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4142&lc=en&cc=us&dlc=en&s w_lang=&product=4323659#N194
I would try the driver from HP.

Flex Print Job not working with custom component

Hi All,
I have to print pages with header, body and footer. So the thought process was to create a custom component fro header, footer and body. Header component is based on Box, Body is a renderer (which will have fix value of items - and will decide the number of possible pages) and footer is again based on Box.
But when i created a simple Custom component like this for header
<?xml version="1.0" encoding="utf-8"?>
<mx:VBox xmlns:fx=http://ns.adobe.com/mxml/2009
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx">
<fx:Declarations>

</fx:Declarations>
<mx:HBox>      <mx:Label id="testLabel" text="Test Container"/>
</mx:HBox>
</mx:VBox>
Then when i try to add this to FlexPrintJob, and save it as 'xps' to see the print output, i get error message that this file is in use or damaged.
    var myPrintJob:FlexPrintJob = new FlexPrintJob();
if(!myPrintJob.start()){
      return;
var header:Header = new Header();
header.width = myPrintJob.pageWidth;
header.visible = false;
FlexGlobals.topLevelApplication.addChild(panierPrintHeader);
myPrintJob.addObject(header);
myPrintJob.send();
FlexGlobals.topLevelApplication.removeChild(panierPrintHeader);
But this does not work and i get the above mentioned exception. Now when i not use the custom component and just have a label or HBox or anything on stage before the print functionality is invoked, it works fine. And this too haapens only if you have a mxml component, i tried by creating a new Label component using actionscript and then provide the same to the printJob, which did not work either. I need help on this, else i will have to take print functionality to server side(Java) which has some business implications, the reason why i am spending time on flex for printing.
Thanks and Regards,
Jigar
Looks like custom component print is not working fine with flex or i am doing something terribly wrong.
Looking forward for help.

Is there nobody in flex community who can help on this....
Looks like a toothless class that adobe actionscript team has provided, which is not liked across much

Osascript for remote login does not work with Leopard

We are testing Leopard on one computer in our labs. The only problem so far is that the osascript that we use to remote login to the computers stopped working (although it works fine on the Tiger machines):
osascript <<EndOfMyScript
tell application "System Events"
keystroke "public"
keystroke tab
delay 0.5
keystroke return
keystroke tab
delay 0.5
keystroke return
keystroke return
end tell
EndOfMyScript
This is a public account with no user password. I've read the discussion below, but have not been able to tweak the command so that it works with Leopard. Any suggestions?
Thanks.
http://lists.apple.com/archives/Remote-desktop/2007/Nov/msg00045.html

I'm having a similar problem - the script below works with my G5 iMacs running 10.4.9 but not the Intel iMacs running 10.4.8. It almost works - the username and password appear in the right boxes, so I run around the room pressing the Return key.
# This script when used with ASR Send UNIX command will login workstations at the LoginWindow.
# The script assumes that the cursor is focused in the Name field.
osascript -e 'tell application "System Events" to keystroke "username"'; \
osascript -e 'tell application "System Events" to keystroke tab'; \
osascript -e 'tell application "System Events" to delay 0.5'; \
osascript -e 'tell application "System Events" to keystroke "password"'; \
osascript -e 'tell application "System Events" to delay 0.5'; \
osascript -e 'tell application "System Events" to keystroke return'
Message was edited by: Catocop

My printer does not work with firefox but does work with explorer

While using ebay I tried to print out a mailing label, and fox fire does not work with it anymore. My printer does work with internet explorer ?

What printer? Does the page appear correctly in Print Preview? What happens when you try to print?

Print button not working with Xerox pluggins installed

Thanks to the wonderful people here I found that if you have any Xerox plugins in /Library/Printers/PPD Plugins you can experience the print button not working.
Removing them fixes it which is nice but I need the plugins, anyone know a work arround?

I've seen this happen with some of our Xerox PPD's on PC's. The cause in this case, is their reference to virtual memory with older OS systems.
I instead used an older PPD or a PPD I had edited to support 200"x200" custom pages sizes, supporting full color.
All I needed was a clean postscript file.
The Adobe 7 PPD writes clean PS.
If you need some kind of VIPP instructions in your PPD for the Xerox, I'd look at getting a newer PPD form Xerox made for OSX.

My canon printer does not work with firefox12

my canon printer does not work firefox 12 edition

Try to reset the print prefs.
See:
*http://kb.mozillazine.org/Problems_printing_web_pages
*https://support.mozilla.org/kb/Printing+a+web+page
There are other things that need your attention.
Please Update to the latest Firefox 17.0.x version.<br />
The Firefox Firefox 12.0 version that you currently run is no longer supported with security updates
*Help > About Firefox
*https://support.mozilla.org/kb/update-firefox-latest-version

Photoshop 7 DOES NOT WORK with Leopard ( OS 10.5 )

If you are not prepared to upgrade your Photoshop 7, DO NOT UPGRADE TO LEOPARD.
Photoshop 7 and OS 10.5.x (Leopard) are not compatible. When Adobe released Photoshop 7 in 2001 as a Universal Binary for OS9 and OSX they had no idea that Apple would be switching to an Intel chip in 2006. As the release of Leopard is also the end of the Classic environment, this may be the reason Photoshop 7 does not work in Leopard.
As of the release of CS4, Photoshop 7 can no longer be used as a path to upgrade Photoshop. A full version has to be bought now. But Photoshop CS or later can still be used as an upgrade to Photoshop CS4.
It is recommended that Photoshop 7 owners still looking to save money on upgrades stay away from eBay, as, unfortunately, much of the software listed is pirated or misrepresented and you will still not be able to upgrade to CS4.
[topic updated by Forum Host]

There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox

HP 8150N Printer still not working with Snow Leopard

I went to the Hewlett Packard page for a new driver and was told the new driver for my printer was included in the Snow Leopard update. I'm sure it is, but my computer can't find the printer. I've used advice from other discussions and tried what I could with the "Print & Fax" feature on my computer, but so far, nothing works. The printer to a network with two other computers in my office. Any suggestions would be helpful. Thanks in advance.

I believe this to be a "generic" statement since the support agent did not know what your problem was. I have double checked, and there are no known issues with the driver for the 8150n (at least none that engineering has been informed of and is working on).
I fully believe the problem you are experiencing is due to the lack of AppleTalk in Snow Leopard.
First print out the IP address of your printer by printing the configuration page. You may also be able to get this information on the front panel if you dig.
Second, open up the print and fax control panel and click the + button to add a printer. In the add printer window that opens, select the IP button at the top, choose the protocol of HP JetDirect - Socket, and then type the IP address of the printer. If the OS automatically selects the right printer driver (and not Generic PostScript) you are good to go. Click Add Printer and happy printing.
If it doesn't auto select the right printer then your printer probably does not have an IP address that is routable from the Mac. The easiest way to get the printer to grab a new IP address is to cold reset it. Cold Reset the printer by powering it down and then powering it back up while holding down the GO button.
This should force the printer to grab a new IP address. Follow the above steps again to add the printer, and away you'll go.
One drawback of this method is if you have a network that keeps changing and a DHCP server that doesn't reserve IP addresses for devices it is possible that the printer at some point in the future updates its IP address and is no longer reachable. If this happens, simply repeat the steps and you'll be all set. The other alternative is to assign a static IP address to your printer, but that takes a bit more work.
Just trying to help.
Andrew

HP LaserJet 2840 not working with Leopard (Wireless Printing)

I just upgraded to Leopard and my HP 2840 LaserJet Printer will no work. There is no Leopard driver and I have re-installed the software many times from the internet and from a CD. Im printing wirelesly with a Airport Extreme Base station (Last generation).

fixed

Printer Software not Working for Windows 8.1 and Drivers not Working with USB 3.0

We have a HP CM1312 MFP. We recently got two new windows 8.1 machines. We tried downloading and installing the windows 8 64 bit software, but everytime we tried installing the software the software program would exit abruptly.
We then tried just downloading the printer drivers and installing these. They installed ok, but when we tried to connect the printer via USB it said the printer did not support USB 3.0 which are the only ports we have on the new computers.
Is there a solution to either of these problems? Without the software we cannot use the fax or scanner.
Thanks.

Can you connect USB 2.0 data drives?
What make/model are the computers?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

ATI Radeon 9600 Mac & PC Edition will not work with leopard

When I installed a new ATI Radeon 9600 Mac & PC Edition, 256MB; my Dual 2 GHz G5 (June 2004) will not allow me to drive my Apple Cinema Display while running under leopard, (neither 10.5.1 or 10.5.2 with Leopard Graphics Update).
The mac starts up as usual and gets to the white screen with Apple logo -then the progress ring eventually stalls. The mouse pointer becomes visible and can be moved freely around this screen.
I can connect from other macs on the network and navigate files, but screen sharing results in an all black window.
The Radeon 9600 works fine if I start up the mac with the Tiger installation disk.
I have tried every suggestion that I could find on these boards and elsewhere: zapped the pram, reset the SMU, installed older ATI Drivers, etc...
Of course the G5 is far out of warranty. I've been running Leopard since the day it shipped - so that's out of warranty now, and there is little help to be found on the ATI/AMD website. I'm afraid I'll have to return the card before Apple releases another graphics update.
The stock graphics card that came with this mac is the nVIDIA 64MB GeForce FX 5200 - but it's having trouble keeping up with Leopard's demands - my isight barely works, most special effects in iChat and PhotoBooth are unusable, and of course I'm not given the option to use a transparent menu bar,
I am really good at swapping video cards in the G5 now - but I'm so frustrated.
Does anyone else have any suggestions?
thanks

Hello I have Grafic card ATI Radeon 9600 Pro-256MB install. after Updates. I was after *delete all ATI files besides*
ATINDRV.kext
ATITVOut.kext
ATIRadeon.kext
ATIRadeon9700.kext
ATIRadeon9700DVDDriver.bundle
ATIRadeon9700GA.plugin
ATIRadeon9700GLDriver.bundle
ATIRadeon9700VADriver.bundle
ATIRadeonDVDDriver.bundle
ATIRadeonGA.plugin
ATIRadeonGLDriver.bundle
ATIRNDRV.kext
from System/Library/Extensions run ther 30'' Cinema, mit 2560x1600 but without Quartz Extreme . *I'm very angry of APPLE* 3 week without help, 5 Telefon support with Apple, with ATI without solution.
I know that ATIRadeon9700.kext drive Quartz Extreme. But I don't know what can I do too.
My solution for this moment is only this one. If I know my solution from Apple, ATI or another one look sometimes on
http://discussions.apple.com/thread.jspa?messageID=6645245&#6645245
Message was edited by: knoche
Message was edited by: knoche

Printer Drivers Not Working with Leopard

Similar Messages

Maybe you are looking for