Printer error officejet 6500

After printing a page an error message appears. General printer error (0x61011bed) but I can't find anything wrong. I just press OK and print again

This article should help resolve the error you are getting:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
Give the steps a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

  • Printer:HP OFFICEJET 6500 E709n Series Doesn't print

    My printer, HP OFFICEJET 6500 E709n Series doesn't print. It is directly connected by a cable to the computer. When I hit the print button, there is an error message:
                   Not enough memory available
                   Check cable as this may not be properly connected
    I checked the cable, everything is okay. I rebooted several times. But it didn' work.
    Anybody can help me?
    thanks
    This question was solved.
    View Solution.

    What operating system? 
    Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Problem with Wireless Printing on Officejet 6500

    I just bought an HP Officejet 6500 E709n and it will not print wirelessly.

    Please read this post then provide some details. What operating system? What error messages?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • DUPLEX PRINTING - HP Officejet 6500 E710a-f PRINTER

     My HP Officejet 6500 E710a-f is fitted with a Gadget for Duplex  Printing.
    That notwithstanding, the Print Settings do not provide an option for automatic Duplex Printing. The Settings only provide for a "Print One Sided" under which there is a Sub-Option that provides for "Manually Print on Both Sides" with the Intruction "Reload Paper when prompted to print the second side".
    Have I perhaps looked for the Duplex Printing Option at the wrong place OR would there perhaps be something wrong with my Printer/Software?
    More to the point, do I need to do anything to activate the Duplex Printing capability??

    Ensure that the driver knows that a duplex unit is present on the printer (assuming that one is):
    For the printer instance in question, bring up the Printer properties dialogue.
    Select the Device settings tab.
    Ensure that the duplex unit is set to Installed rather than Not installed.

  • Unable to Communicate with Printer Error - Officejet Pro 8600

    My printer was working fine last week... printing from my Mac desktop via wireless. 
    Now, when I try to print, the progress window is just hanging... trying to find the printer.
    I deleted the printer in my settings and tried to reinstall. Now, I am getting an error message that says: Unable to Communicate with the Printer at this Time. 
    Help, please!
    Comuputer: Mac OSX Version 10.9.3
    Printer: Officejet Pro 8600 Plus... only about 3 months old!

    Hello K_D123, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having wireless issues.  I would like to try and help.
    I would recommend powering off your computer and printer.  Once they are both off, I would unplug the power from the back of your wireless router, wait 60 seconds and plug it back in.  After the router has begun broadcasting, power on the printer and computer.
    I would also recommend following the steps in this document on Wireless printing center Troubleshooting Issues.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Can't print to officejet 6500 E709a from networked computer

    Today I've tried reinstalling my printer software multiple times and I still can't get the printer to print. "Print Test Page Fails." The printer itself works fine on the computer it's connected to with a USB. It works fine from my second networked computer when connected by USB. The second networked computer can see the printer on the network, and appears to be adding it correctly. It tells me is there and ready, but then gives me the error message when I try to print a test page. Nothing is appearing in the what's printing dialog box either. My network works fine with everything else. All troubleshooting has failed to produce any errors. I'm running Windows 7 on both computers, the main one a 64-bit and the second one 32-bit. A third computer on the network, in another room, can find and print from the printer. So.... any idea what's stopping me from getting this resolved?  Thanks...  Liz
    This question was solved.
    View Solution.

    One final update to report...  I almost abandoned the idea of printing to my HP printer from a network computer after receiving your last message. It still bothered me, though, that both Norton's firewall, which I intended to use, and the Windows firewall, which I thought was disabled, had been enabled when I installed the printer. As a final attempt, I made sure the Windows firewall was off, uninstalled the printer using the HP setup CD, and cleaned the Registry. Then I reinstalled the printer again, and WOW, it works! I'm posting this just in case it may help someone else who has had to rebuild their computer after a full system recovery back to factory status. My learning: Norton's firewall is not a problem, but Windows firewall needs to be all the way off. Thanks for all the help and time you took trying to get me up and printing again.  Cheers...  Liz 

  • Printing from officejet 6500 e709n on wifi network

    printing from a macbook pro w/ os x yosemite per subject line above. unable to print.

    Hi @William21105 ,
    I understand that you are not able to print since upgrading to OS X 10.10 Yosemite.
    Drivers are currently not available for your HP printer and Yosemite.
    Sorry for any inconvenience.
    I worked for HP.

  • I can't get my printer, HP Officejet 6500 Wireless E709n, to print?

    How can I get my printer to print?

    Hi,
    Which version of Acrobat and Operating System are you using?
    Are you able to print any other document type like Word or Notepad?
    Please try updating HP printer drivers and Acrobat (via Help -> Check for Updates) and then check the issue.
    Regards,
    Anoop

  • Wireless Printing to HP Officejet 6500 E709n

    I reciently changed from Droid to Iphone 5.
    Using droid mobil hot spot I could connect wirelessly to my computers and my printer HP Officejet 6500 E709n.
    With the Iphone 5 hot spot I can connect to my computers but with the HP printed I can see the modem during the wireless set up
    but when I enter the WPA Passphrase it will not connect. I get an error print out from the HP noting, MAC address filtering may be enabled on the wireless router (I Phone5) This can prevent you HP printer from connecting to the wireless network during setup. Temperoraly disable the MAC Address filtering on the wireless router then run wireless network setup to configure the printer.
    Anyone have a fix to this.

    With an iphone the native printing is built in. no set up per se except your iphone has to be on the home network which you connect to via your settings then click on wifi then it will search for your home network. If you see your home network ssid then click it then on connect. if it has a pass phrase it will request it, then it will connect.
    When you are looking at a web page or an email on the iphone you need only click on the circular arrow. Select print and then select the wireless printer from the selections found. in my house I use an hp D410a All in one and a new Canon Pixma 3220 which is set up on my home network. I select the printer I want and it prints via air print .
    You do not need an HP Printing app for the Apple iPhone. As long as you have set up the HP Printer or any wireless printer to your network the iPhone will print to it. No special drivers are necessary.
    Hope that helped? if not post back.

  • Hp 6500 officejet 6500 e709n series won't print

    This printer printed a few documents, but, after one week, it would not print, I just get an error message on the screen and my computer has a popup that says "document failed to print".     Officejet 6500 e709n series.

    What operating system? How is the printer connected - USB, wired LAN, Wireless LAN?  Will the printer make copies without problems?
    I would suggest downloading the HP Print Diagnostic Utility from HP here.  If the printer is connected with a LAN connection (wired or wireless) you can also download the Network Diagnostic Utility.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • General printer error, 0X61011beb

    I have tried all troubleshooting suggestions, nothing has worked. My printer is Officejet 6500 709a,
    need help fixing this problem. Thanks.

    Hi dr_colt,
    Some solutions to fix this error, here:
    http://fix-your-printer.blogspot.com/2011/02/error-0x61011beb-on-hp-officejet-and.html
    Good luck !

  • Hp officejet 6500 e709n series wireless network connection issues

    My HP officejet 6500 e709n series all-in-one printer was working perfectly fine the last time I used it (admittedly a couple of months ago).  Now it seems like the printer thinks it is connected to the wireless network, but the computer thinks it isn't.  I have run the wireless network test report off the printer a couple of times.  The first time it said it couldn't detect any issues.  The second time it said the only possible issue is that "MAC address filtering may be enabled on your wireles router".  I have NO IDEA how to turn that off.  I also don't know why this would suddenly be an issue since the printer was working fine a couple of months ago and we haven't changed anything since then.  I have also run the network configuration page off the printer and it seems to think everything is fine.
    When I run the troubleshooter off my computer (hp pavilion running Windows 7) it says "Printer hp officejet 6500 e709n series fax cannot be contacted over the network".  I am getting very frustrated.  How do I fix this problem?

    What router?  What operating system?  Have you run the Wireless Setup WIzard from the Network menu on the front of the printer?  Do that.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • OfficeJet 6500

    Cannot get envelopes to print on officeJet 6500  using XP

    Please provide some details of your issue.  Do they not feed, or not print correctly or ???
    I have printed envelopes fine on my Officejet 6500 under Windows 7.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Mac: Officejet 6500 e710n wireless connectivity troubles

    Printer: HP Officejet 6500 e710n-z
    Mac OSX Lion 10.7.5
    I've successfully been printing wirlessly with my Offiject 6500 e710n for over a year. Connectivity comes and goes but I've always been able to reconnect them by either rebooting the printer or reconnecting them via the IP address of the printer. 
    However it's no longer working. I've tried uninstalling the printer drivers and reinstalling and now the printer cannot be located wirelessly on the network at all (despite the fact the printer's wireless report says all connections fine). I've tried the following:
    - manually add printer using the IPv4 address --> says device not found
    - type printer's IP address into my web browser -->says failed to connect as the server is not responding
    - connect via usb to printer --> recognises printer, sets up the wireless network, says disconnect and then it disappears again and says device not found
    I'm starting to run out of ideas... Any suggestions to help me reconfigure/ re-install my printer so it works again would be greatly appreciated!
    This question was solved.
    View Solution.

    Resolved the issue - disconnected power source to both router and printer for 60 seconds then restarted the devices and it seemed to fix things

  • HT1338 when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 70

    when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 709e, connecter wirelessly

    I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
    HP Photosmart Premium Fax All in One - C410a
    I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print.  Since then I've been able to resolve my specific problem.
    I
    1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found), 
    2. grabbed the software/driver update from Aug, 2010,
    3. installed the Aug, 2010 update, and my problems seem to have been fixed.
    This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&...

Maybe you are looking for