Printer Error with Shared USB printer

Greetings;
I have just installed my HP 7760 on my new G5, and I am attempting to print via shared usb to my G3 Imac which is running 10.3.9 I have used this setup lots in the past but with both MAC's running 10.3.9, Now all I get is "Print Error"!
I can see the shared printer on the G3 and select it on the G5 but it just results in a print error when I attempt to print.
Any thoughts would be most helpful

Hi Greg;
Many thanks for your interest in my problem. I have done the following;
1. Installed the latest drivers from HP on both machines
2. Removed and then added the printer.
3. Repaired permissions on both computers and restarted.
This seems to be related to 10.4.3 as I have read some references to this in other threads. Prior to the G5 with 10.4.3 I was printing with the G3'es under 10.3.9 using USB sharing with no problems. I have no problem printing from either computer when the printer is connected directly and I can see the shared printer in printer setup and have no problem selecting it however I am still getting the "print error" when printing to the shared printer.
I am going to try one more experiment, I no have the printer connected directly to the G5 with printer sharing turned on. I will try to print to it from the G3and see what happens. I will post the results when complete.
JJ
20' IMac G5 Isight Mac OS X (10.4.3) Imac 333Mhz / Imac 600Mhz

Similar Messages

When installing Premiere Elements I get an error with Shared Technologies

When installing Premiere Elements onto a Windows XP Service Pak 3, I get an error with Shared Technologies.

Hi,
Thx for the reply.
I had Bridge open in background and once I closed that Elements installed correctly.
Thank you.

PSE 12 error with 'shared technologies'

It seems I have fallen foul of what seems a common error. I am running Windows 7 and installing (or trying to) an Upgrade edition of both PSE and PSE Premiere. I have tried so far a normal install, shared technologies error. A clean install,error.
Virus and firewalls down. error. My opical drives seemed to be playing up so am using a new USB DVD drive, error.
Having tried to read the logs and still not how to resolve the problem. I have never had this sort of problem before with any program and I certainly dont expect it from Adobe. Help.

Certainly Fpben then I would recommend contacting our support team directly. For the best assistance, I recommend our chat support at http://adobe.ly/yxj0t6. Our chat representatives can provide a personalized experience to resolve the issue you have described.
If you do decide to review your installation logs please see Troubleshoot install using logs | Elements - http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html. You are welcome to post any specific error messages you discover to this discussion thread.

Synching error with different USB port

I set up my iPhone and had no problems synching with iTunes. I then changed to a different USB port than the one I had originally used. I began to recieve the following error when I tryed to synch "0xE800001". I then switched to a different usb port and everything worked fine.
Is there any way to get iPhone to work with the new usb port because that is the only port that charges when my computer is off.

Check out article below for tips and suggestions
iPhone: Troubleshooting USB connections
http://support.apple.com/kb/TS1286
Make sure you perform all Vista Software updates, also visit your PC manufacture website and download and install latest drivers for your PC hardware.
Also ensure you are not connecting via a USB Hub or using a USB extension cable.
If it only gives that error message in 1 USB port and not others. Try disconnecting any un-needed USB devices. Then connect back to that port and try syncing again.

VMWare workstation error with shared VMs

Hi. I have a bug with VMWare Workstation I could not fix. It's about sharing VMs remotely, it reports the following error
Logging to /tmp/vmware-root/vmware-modconfig-1165.log
Cannot find insserv, chkconfig, or update-rc.d on your system. Also cannot find System V style init directories. Unable to add service.
Starting Workstation Server:
Can anyone please me help to publish a remote server VMs?.

Thanks for that I found it in the forum on a subsequent search.

Microsoft Office problems with Shared USB Disk

I am having problems writing files to USB drives shared off of a Airport Extreme Base Station. The error message from any of the Microsoft Office products would indicate a write protection issue. This happens if I try to save a file I open on the shared drive or if I try to save a new file. No problems from the finder. Also, this only happens for the wireless users, the computer connected through the ethernet connection has no issues. I got in through the command line and checked the user id and permissions and no issue I can see.
Any ideas?

I am having problems writing files to USB drives
shared off of a Airport Extreme Base Station. The
error message from any of the Microsoft Office
products would indicate a write protection issue.
This happens if I try to save a file I open on the
shared drive or if I try to save a new file. No
problems from the finder. Also, this only happens
for the wireless users, the computer connected
through the ethernet connection has no issues. I
got in through the command line and checked the user
id and permissions and no issue I can see.
I have 2 USB drives and can use MS Office for Mac to write files on them at will using 2 wireless notebooks. No problem whatsoever.

Failover Cluster Validation Report Error with IBM USB Remote NDIS Network device

We are setting up Microsoft Windows Server 2008 R2 Failover Cluster on IBM X3850 X5 and get errors in the Failover cluster Validation Report due to the IBM USB Remote NDIS Network Device is using APIPA adresses and both servers are using same APIPA-adresse.
How should I configure the Server and OS for the Failover cluster to be MS approved?
IBM don't recommend that i disable the Network device, but it is a possible solution!?!

What I did was use ipconfig /all to see the settings it is using and then when and set the ip setting on the NDIS driver to be that except I increment the last value by 1 for each node so that they do not have the same IP address. I ran the
cluster validation again and it came up clean and I have not experienced any issues yet. It does give warnings about it being an Automatic Private IP Address and should not be used, which is ok because we are not going to use it anyways.
Rich Baumet

Error with shared library

People, I have uninstalled scribus 1.16 and downloaded and installed the scribus 1.17.pkg.tar.gz
But trying to execute it, the following message appears:
error while loading shared libraries libssl.so.0.9.7 Cannot open shared object file. No such file or directory
What should I do?
Thanks a lot for who can answer me
Rafael

rafael wrote:
People, I have uninstalled scribus 1.16 and downloaded and installed the scribus 1.17.pkg.tar.gz
But trying to execute it, the following message appears:
error while loading shared libraries libssl.so.0.9.7 Cannot open shared object file. No such file or directory
What should I do?
Thanks a lot for who can answer me
Rafael
the new scribus needs openssl 0.9.7 (also in the repos) --- but warning: if your system is not up-to-date and you update to 0.9.7, you will break a lot of pkgs
-> run pacman -Suy to have a updated system first (i assume you have arch 0.6 installed and never updated) --- but this solution has a second warning: it will probably want to download more hundreds of MB of updated software

Unable to install Photoshop Elements 12 due to error with shared technologies. I have tried all troubleshooting steps and am no where. Install logs do not have anything that stands out. Any ideas?

I have tried all troubleshooting steps and am not getting anywhere. Any Ideas?

I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.

Error With Export/Print from Crystal Report Viewer

Hello there,
I've searched through the web and SAP discussion boards with not much luck with this issue.
After working through this for some days now I've decided to look here for help.
Environment:
I have created a web Crystal Report viewer application(Developed with SBOP BI Platform 4.0 SP06 .NET SDK Runtime) that communicates with a managed Cyrstal Server 2011 SP4 (Product 14.0)
I am able to connect and authenticate with the server, retrieve a token for communication and display reports in the Crystal report Viewer successfully.
Problem:
When I attempt to export, I receive the prompt to select format and pages.
When I click export after selections most times I receive an error with the text
Unable to cast COM object of type 'System.__ComObject' to interface type 'CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{74EEBC42-6C5D-11D3-9172-00902741EE7C}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
Other times the page simply refreshes on export.
When I click to print, no print dialog is displayed the page always refreshes and no error is displayed.
No Print or Export document is ever created.
As many print/export issues seems to be related, I'm guessing this two issues are as well.
Notes:
I am utilizing the ReportClientDocument model
I am storing this in session to use as the crystal report viewer report source on postbacks
I am assigning a subset of export formats to the crystal report viewer
I am setting particular parameters as well on the report source
At this point I would appreciate every assistance I may receive on this issue
Thanks in advance,
Below is the pertinent code
Code:
<aspx>
   <CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
   AutoDataBind="true" EnableDatabaseLogonPrompt="False"
   BestFitPage="False" ReuseParameterValuesOnRefresh="True"
CssClass="reportFrame" Height="1000px" Width="1100px" EnableDrillDown="False"
ToolPanelView="None" PrintMode="Pdf"/>
<Codebehind>
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using CrystalDecisions.Enterprise;
using CrystalDecisions.ReportAppServer.ClientDoc;
using CrystalDecisions.ReportAppServer.CommonObjectModel;
using CrystalDecisions.ReportAppServer.Controllers;
using CrystalDecisions.ReportAppServer.DataDefModel;
using CrystalDecisions.ReportAppServer.ReportDefModel;
using CrystalDecisions.Shared;
namespace ClassicInternalReportPage
    public partial class Reports : System.Web.UI.Page
        protected override void OnInit(EventArgs e)
            base.OnInit(e);
            if (!String.IsNullOrEmpty(Convert.ToString(Session["LogonToken"])) && !IsPostBack)
                SessionMgr sessionMgr = new SessionMgr();
                EnterpriseSession enterpriseSession = sessionMgr.LogonWithToken(Session["LogonToken"].ToString());
                EnterpriseService reportService = enterpriseSession.GetService("RASReportFactory");
                InfoStore infoStore = new InfoStore(enterpriseSession.GetService("InfoStore"));
                if (reportService != null)
                    string queryString = String.Format("Select SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS "
                       + "Where SI_PROGID='CrystalEnterprise.Report' "
                       + "And SI_ID = {0} "
                       + "And SI_INSTANCE = 0", Request.QueryString["rId"]);
                    InfoObjects infoObjects = infoStore.Query(queryString);
                    ReportAppFactory reportFactory = (ReportAppFactory)reportService.Interface;
                    if (infoObjects != null && infoObjects.Count > 0)
                        ISCDReportClientDocument reportSource = reportFactory.OpenDocument(infoObjects[1].ID, 0);
                        Session["ReportClDocument"] = AssignReportParameters(reportSource) ? reportSource : null;
                        CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
                        CrystalReportViewer1.DataBind();
            //Viewer options
            // Don't enable prompting for Live and Custom
            CrystalReportViewer1.EnableParameterPrompt = !(Request.QueryString["t"] == "1" || Request.QueryString["t"] == "4");
            CrystalReportViewer1.HasToggleParameterPanelButton = CrystalReportViewer1.EnableParameterPrompt;
            CrystalReportViewer1.AllowedExportFormats = (int)(ViewerExportFormats.PdfFormat | ViewerExportFormats.ExcelFormat | ViewerExportFormats.XLSXFormat | ViewerExportFormats.CsvFormat);
        protected void Page_Load(object sender, EventArgs e)
            if (IsPostBack && CrystalReportViewer1.ReportSource == null)
                CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
                CrystalReportViewer1.DataBind();
        private bool AssignReportParameters(ISCDReportClientDocument reportSource)
            bool success = true;
            if (Request.QueryString["t"] == "1" || Request.QueryString["t"] == "2" || Request.QueryString["t"] == "4" )
                reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "STORE", Session["storeParam"]);
                if (Request.QueryString["t"] == "2")
                    reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "FromDate", Request.QueryString["fromdate"]);
                    reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "ToDate", Request.QueryString["todate"]);
            else if (Request.QueryString["t"] == "3")
                reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "SKU", Request.QueryString["sku"]);
            else
                //Unknown report type alert
                success = false;
            return success;

Thanks Don for your response,
I'm new to the SCN spaces and my content has been moved a couple of times already.
In response to your questions
The runtime is installed on the web application server, if by that you mean the machine hosting the created .NET SDK application.
My question was whether it was also required on the Crystal Server 2011 (I.E. the main enterprise server with CMS and Report management and I guess RAS and all that). I figured this would remain untouched and queries would simply be made against it to retrieve/view reports e.t.c
If install of the SDK on Crystal Server 2011 is indeed required should I expect any interruption to any of the core services after a restart. I.E. I'm hoping that none of the SDK objects would interfere with the existing server objects (in SAP Business Objects)Reason I ask is I note that much of the SDK install directories are similar to the existing Crystal Enterprise Server 2011 (Product 14.0.0)
Is this temp folder to be manually created/configured or is it created by the application automatically to perform tasks. Or are you referring to the default C:\Windows\Temp directory and so saying that the application would try to use this for print and export tasks?Once I'm sure which I'd give the app pool user permission
Printing is to be client side but I figured by default (with the Crystal Report Viewer) it would simply pool and print from the user's printer. This is how it works with the previously used URL reporting approach (viewrpt.cwr). Therefore a user can print the document from wherever they are with their own printer.We don't intend on printing from the server machine, but are you suggesting that a printer must be installed on server (which one web or enterprise server) for any client side printing to work.
App pool is running in 32 bit mode
Initially didn't get anything useful from fiddler but I'd try and look closer on your suggestion.
It's also possible that some of my questions are a misunderstanding of APP vs RAS vs WEB, so please feel free to clarify. Currently I see the Web server as simply the created .NET SDK Application and RAS (Crystal Server 2011 e.t.c) as the existing fully established Application server which I simply pool for information.
Thank you for your patience and advice,

HP laserjet 1200 using windows7, cabled to the printer with a usb to parallel adapter

HP laserjet 1200 using windows7. My computer has USB ports, but no parallel port, so the computer is cabled to the printer with a usb to parallel adapter. Sometimes works fine, sometimes system states printer as ready, but will not print. Reboot hardware and on restart, I got one page to print. Next attempt to print puts the document in cue, but just sits there -- no error message. Finally, after multiple restarts, I got it to print (have no idea how), but now I had to print 20 pages one page at a time. It will not print more than one page, even if I select to print 20. Next time I start the computer I don't know if the printer will print. Do you need to use the same USB port each time, Or are the USB to parallel adapters undependable?
This question was solved.
View Solution.

Hey renradd!
Unfortunately, parallel to USB adapters can be undependable. Other than a new printer, I'm not sure what would provide you with a fix for this problem. You might try another adapter if you have one, but if that still doesn't work I would look into a printer that your computer could support.
Hope this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Can't print with airport usb connection only

i have spent the last 3 days searching for help to fix my problem - PLEASE HELP!!!
using:
imac osx 10.6.8
canon image class mf8350cdn
airport extreme base station
I cannot seem to print wirelessly with my imac using just the USB connection on the airport router. I can print with the printer locally when it's "hardwired" directly to a usb on the back of the imac. I can print if i connect a cat5 network cable from the printer to the airport. i can print wirelessly with a PC when the printer is connected with a usb to the airport. i just can't do this with my imac via the usb connection on the router. my error message is a Canon CMFP Printer Driver telling me printer is not responding - check the power.....try sending again.
I believe i have tried everything!!! While i am newer to mac and not the greatest at networking, i have manipulated every setting to match up with all of the online help i can get (trying to not have to send this question!!) and no luck.
i have deleted printers and jobs, reinstalled everything, i changed the cable, downloaded the latest drivers from canon and apple, i updated the firmware on the printer. i even reinstalled my osx and confirmed all is updated on my imac.
i don't want to scan or fax this way - so that is not my issue -- it's just plain old printing using that usb port.
i need all of my other ports on the airport for other things, so i cannot sacrific this one for printing - i just want to use the usb as my printer connection to print with all of the machines i have.
hope my question makes sense and that someone will take the time to give a reply.
thanks!!
p.s. the closest discussion that matches my issue seems to be this one:
https://discussions.apple.com/message/12367897#12367897
but, i still can't seem to get there..........

The most comprehensive set of troubleshooting instructions for printing problems involving Airport printers is found at:
http://docs.info.apple.com/article.html?artnum=107418
It is possible your printer simply cannot be made to work in this manner, and is more often than not a problem with multifunction printers.

Error with printer setup

Error with printer setup but everyhing seems to be fine

Hi @W6YUM , and welcome to the HP Forums!
I see you are getting an error, but everything seems to work. I would like to try and assist.
Before we start, what error are you getting?
Are you connected wirelessly, or USB?
Is the on the printer or computer?
Please let me know. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Can a Shared USB Printer be an IP Printer too?

Apologies if this is a FAQ that was already answered somewhere else, I did look but couldn't find the answer here.
I have a local LAN with addresses 192.168.1.x. Some clients are static IP addresses like .101, .102, and DHCP is also served up to new clients in the range .200 and up, by a Belkin wireless router. The router is attached to Roadrunner so has a WAN address like 65.xx.xx.xx.
On this network is an imac G5 (static local IP) running 10.4.8. Physically attached to this by USB is a Shared USB Printer (Epson 6600 AIO). Shared printing within the local network works just fine from any client.
So now the question. Is there a way to set up IP printing so that this printer can be used remotely? Presumably would have to know the WAN address and open a port in the router somehow. Hope the question is clear, let me know if I need to provide additional info.
Thanks for your advice

So now the question. Is there a way to set up IP
printing so that this printer can be used remotely?
Presumably would have to know the WAN address and
open a port in the router somehow.
Yes, you are on the right track in your thinking.
I have not tried printing from the WAN, but for web hosting, ftp serving I have enabled port forwarding ont the router to the mac. For printing I think you need to have port 631 open and forwarded from the router to the Mac. Your particular router should have a web-based configuration setting, where you use a web browser and log into the router LAN IP.
http://www.whatismyip.com will tell you what your public WAN IP is, from your Mac, which may change occasionally if you have a typical dynamic IP service. There are some ISP services that can give you a static IP, or third-party static IP alias to the dynamic IP, if you need it.

Shared USB Printing not working

I have a HP Laser Jet 1012 attached to my G4 tower via USB. It is described as "Laser Jet 1012 USB" in the add printer dialog box. I can print using the G4 tower with no problem.
When I try to add this printer using my G4 Power book via shared USB printing or just USB it is described as "Laser Jet Bonjour printer". When I try to print I get a "forbidden message" in the Print Status dialog box and of course no printing results.
I have reinstalled the original and the latest printer drivers numerous times.
Any help would be appreciated. Thanks,
Bill T.

Yes shared printing is enabled on the G4 Tower.
Bill T.

Printer Error with Shared USB printer

Similar Messages

Maybe you are looking for