Printer falls off after connecting to the network (wired)

Hello! I'm using a Hp Officejet pro 8600 plus printer for over 2 years without any problems.Since to day it's connected via a switch and the printer is giving a error and the display shows "please turn the printer of and restart". I've done this a couple of times and every single time it falls off.... Does anyone knows where this problem might be?

first there is the EVW3226EU modem/router from Ubee that's wired to a 5way switch from Dlink (the DGS-1005D). The printer is wired to the switch.

Similar Messages

I have a Time Capsule as my router. I can connect wirelessly to the network and internet with my MBPr, but my Mac Mini will only connect to the network wired or wirelessly. Airport on it sees the internet as green, but will not connect.

I have the Time Capsule hooked to a wireless modem. It uses a static IP, which is put in and running. The MBPr connects, as well as my iPhone 5, to the internet and network without problem. I can see the Mac Mini, external drive attached to it, and the Time Capsule. The Mac Mini connects to the network wired or wirelessly, but not to the internet. On wireless, using AirPort the Internet shows green, but no connection when I open Safari. The settings under network settings are identical except for LAN IP between the Mac Mini and the MBPr. I was hoping someone might have an idea of what was going on. Before I moved the Time Capsule was on Bridge mode from another router, now it is on DHCP and NAT for the internal network.

No, its is connected direct to the providers fiber box.

I am using Airport Extreme as my wireless router on a Windows 7 machine. I am trying to use an HP wireless printer without connecting to the USB port. The printer says it is connected to the network but I can't print. Any suggestions?

See the heading

anchio ho lo stesso problema con Mas Os x 10.7.4
con il sistema 10.5 funziona perfettamente
credo sia un problema del sistema
ho provato con 10.8 stesso problema
ciao

After updating my iPad 2 to iOS 6, I cannot connect to my router. I have turned the router off, left off for a considerable time, turned the iPad off and on, reset the network settings, nothing works. Any other suggestions?

After updating my iPad 2 to iOS 6, I cannot connect to my router. I have turned the router off, left off for a considerable time, turned the iPad off and on, reset the network settings, nothing works. Any other suggestions? It is obvious many others are having similar problems, so the iOS 6 looks like a loser.

I have just upgraded from a 3 to a 4S and now I can't connect to my wifi. I've tried everything, resetting network settings, switching to boot, renewing lease, rebooting, turning off cellular data etc etc. nothing works!! Very frustrating!

What do i do after downloading iOS 3.1 software and "There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again." comes up?

what do i do after downloading iOS 3.1 software and "There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again." comes up?

Hello, I hope by now you have resolved the upgrade issue, but if not, here is what I ended up having to do:
“SUCCESS!!! I took my iPod to a friend who is a computer programmer/genius. He turned off his wireless, hooked the ethernet cable directly into his computer, and the download went through without a hitch. YAY!”
Here is my original post explaining what I had already tried:
“Hi all,
I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one seems to have a universal solution and I have tried several.
I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
Can anyone help? Please?!
Thank you!!!
P.S. We have a PC, with Windows XP Home.”
Now, there seem to be a lot of different ways to solve the 8288 error, none of which are universal. Best of luck getting yours upgraded!
Tiffany
P.S. The post by Sparkhi is a link to his blog going into a long story about how he wanted Apple to pay him for “solving” the issue….the one that apparently has been solved by multiple solutions. I’m not trying to bash, it just bothers me that he put up this whole story and finally, at the very end of his blog post, posts his solution.

My ipod touch wont connect to wifi after i reset the network settings

my ipod touch wont connect to wifi after i reset the network settings

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Printer not found but my 5510 is connected to the network

Help, my 5510 B111a printer was working fine then suddenly it stopped finding my computer to scan to, and my printed couldn't find it to print to.
I have recently changed my broadband to BT Infinitty 2, but it was working after I changed.
I have restored the the printer to factory settings and reinstalled the new router and it is showing as being connected to the network and shows the IP address.
I re-installed the driver on my laptop but when it tries to add it to the network it comes up as 'printer not found'. I entered the IP adress it gave me when I connected it to the network but it still comes up as not found.
Going a bit mad here now, can anyone help please?

Sorry that you are having a problem with the printer not being found.
Try to disable the firewall and anti-virus.
Also, plug in a USB cable and see if it gets recognized. If so, then it is something on the network that is blocking the printer ports.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none receive

Hi,
WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none received"... Help
I have tried network diagnostics which doesnt help... The only other ting is, when I woke the computer up it said tat another device was using my IP... My wife had plugged her phone into the computer to charge etc but even when i turn wifi off on the phone there is no change... also in settings on the phone the IP address is different...

The answer to your question is - neither!
Your PC should to configured to obtain an IP address automatically, and to obtain DNS server IP addresses automatically, from the Airport Express. This is the way Windows (and Macs for that matter) are configued by default, and that is the way most people have their computers set up. If you manually configured your PC's IP address to be the same as your wife's Mac, it certainly explains why your PC is not able to access the internet.

After installed the Lion, my Mac could not connect to internet. At least the my apple Mac turn on second time, then it would connect to the network. Who can tell how to fix it? Thanks!

Since my iMac OSX have installed the Lion last week, my iMac could not connect to the internet in the first turn on, and at least I turn off the computer, and turn it on again, then there is not problem to connect to the internet. So, it take much time to access to network.
Today I called apple store to fix the problem. They rebooted my system with their distance control.By that time, it seems work. But after couple hours later, I turn on my iMac, there is not connection to the network again. I hope someone could help me to solve that problem. Thanks!

I think I would call them back to follow up. As far as they know, everything is fine. But if you call back they can continue from where they were. They usually give a case number either over the phone the first time you called, or in an email later.

My printer is connected to the network but is unable to communicate with computer

my printer is connected to the network but is unable to communicate with computer

Hi mdqprimitive,
Sry to hear about your wireless issues.
Can you please provide some further info. so we can better troubleshoot the issue you are experiencing.
What model is your HP Printer?
What model router are you using for your wireless network?
Print out a Wireless Network Test Report from the wireless menu of your printer's front panel.
What does the report show?
Did your laptop successfully discover the printer after installing the software?
Thank you

My printer is connected to the network and is accesable,I can not setup webervices cant reach server

HP Officejet Pro 8600 N911a
Windows 7
Cannot connect to the server.
Check the Internet connection and try again. Or contact your system administrator or the person who set up the printer.
If your network requires a proxy server address to connect to Internet, click Enter Proxy or check your browser settings.
The printer is connected to the network with proper DNS I am the adminastrator

The steps below typically resolve the issue you’re experiencing:
1. Unplug the power cord from the back of the printer.
2. Unplug the power cord from the back of your router (and modem, if separate from the router).
3. Wait 20 seconds, then plug the router (and modem, if applicable) back in.
4. Wait 30 seconds, then plug the printer back in and power it on.
5. Press the ePrint button on the printer's front panel, and it should try to connect to Web Services again.
Those steps usually resolve the issue, but if it still occurs you can try setting static network info for the printer (which sometimes helps to stabilize the printer's ability to get outside of your network, to the internet):
1. Press the network icon at the top of the printer's screen and note the IP address.
2. Enter the IP address into the address bar of a web browser on a computer and press enter or click the browser's go button.
3. The printer status page should be opened. Click on Network at the top.
4. Select Proxy Settings.
Note: If you are prompted for a redirect, select OK. If you receive a certificate warning, select the option that lets you continue anyway.
If you receive a Internal System Error, refresh the page until it loads the proxy settings.
5. Verify that all fields are blank. If they are not, clear them and make sure the Proxy Server requires authentication is unchecked and click apply. You should get a success message.
6. Click on IPv4 under the correct connection (wired or wireless) on the left.
Note: If you only see IP Address Configuration and DNS Address Configuration with a yellow note, refresh the page until it loads completely.
8. Leave the IP Address Configuration as Automatic IP.
9. Change DNS Address Configuration to Manual DNS server.
10. Enter 8.8.8.8 for the Manual Preferred DNS Server and 8.8.4.4 for the Manual Alternate DNS Server.
11. Click Apply and you should get a success message.
12. Power off the printer for 30 seconds and then turn it back on to force the new settings to take effect.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Wifi keeps scanning and dropping even after connected to home network. Never had this issue until the update, and now my phone runs slow and terrible. Horrible update!! Any ideas on a fix?

Wifi keeps scanning and dropping even after connected to home network. Never had this issue until the update, and now my phone runs slow and terrible. Horrible update!! Any ideas on a fix?

It's important that you have a steady WiFi connection, ZealousEdge. What phone do you have? Is your phone unable to connect to any WiFi network? If you can, please try deleting the saved WiFi network and re-adding it.
AndreaS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Can't print to my HP D2460 over the network anymore, after upgrade to SL.

Hi,
I upgraded to Snow Leopard today. Now I can't print to my HP D2460 Deskjet printer anymore. The printer is shared from my Windows XP system via SMB. When I try to print I see the following message in the print queue on the Windows XP system: "Remote Downlevel Document - Error printing".
I have updated the print drivers at both ends and still can't get it to work.
If I connect the printer to a USB port on my MacBook Pro, it prints fine. It's only the network/SMB printing that seems to be broken.
Has anyone else had this problem? How can I fix it?
Cheers.
Gibbo

Try downloading the driver here.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4159&lc=en&cc=us&dlc=en&s w_lang=&product=391189

After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home. I have restared the phone and toggled the router, still no connection

After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home (this is the network I used to update the phone). My iPad however does not seem to have any problem connecting. I have restared the phone, toggled the router, re-entered the network password but there's still no connection.

When your device is trying to connect to the work Wi-Fi network, go to Settings > Wi-Fi > then tap on the name of the Netowrk that she is having trouble with. Then tap on forget this network. Let the device attempt to connect again and make absolutely sure she is trying to connect to the work network and not a nearby network, then make absolutely sure the password is entered correctly.

Unable to receive internet connection over wifi connection. Shows that I am connected to the network, but do not have internet access. Checked my firewall and turned it off. What else am I missing or should be doing differently?

Unable to receive internet connection over wifi connection. Shows that I am connected to the network, but do not have internet access. Checked my firewall and turned it off. What else am I missing or should be doing differently?

You might want to try resetting your router and your modem - just unplug the cords, leave them unplugged for about 3-5 minutes and then replug the modem and then the router in that order.
This may or may not correct your problem - call back if it doesn't.
Clinton

Printer falls off after connecting to the network (wired)

Similar Messages

Maybe you are looking for