Printer for cardstock?
Can anyone recommend a printer for thick cardstock? I am planning to make custom bicycle playing cards and I want to print directly onto the card.
what I am looking for:
a printer that loads paper from the top, front or rear doesn't matter as long as it has a straight path and doesn't bend the paper.
inkjet
prints to cardstock
under $200 if possible
ink that isn't expensive to replace
Thanks for any help!!
Anyone ???
Similar Messages
-
Best Canon Printer for custom CARDSTOCK printing
Hello, just looking for advice on the best Canon printer for printing on 7 x 10" cardstock.
I want:
a toploading (or rear loading)
inkjet
prints easily on cardstock
able to set custom size paper size (7X10")
not expensive!
Giving up on HPs, and reading that Canon printers do well with heavier stock. Any advice/opinion is welcome. THANK YOU!!
haggisvitae.comHi HVStudio,
If you don't need to print documents larger than leter or legal size, I would recommend the iP7220. More information on this printer can be found at the following URL:
http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_inkjet_printers/pixma_i...
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
i can not get this printer to print on cardstock.what am i doing wrong.regular paper yes,cardstock no.please help????
Hi,
Please check the thickness (called weight) of those cards.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Printing on cardstock paper using c4150 all in one
I don't know if my printer will print on cardstock paper. Does anybody know? Thanks
Hi there mamapj,
This article has the paper specifiactions for your printer. Check the intended card stock against those shown here for compatibility.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
Print on cardstock HP deskjet F4400
wanting to print on cardstock, adjusted paper to matte cardstock setting, cardstock rolls through printer
but doesn't print on it.Hi,
How do you connect your printer now ? Based on the following information, it only has USB connection:
http://www.hp.com/hpinfo/newsroom/press_kits/2009/ecosolutions/reduceimpact/HPDeskjetF4400Factsheet....
Support/Connectivity
o
High Speed USB 2.0
No driver for Chromebook for USB connection. Please try:
http://www.cnet.com/au/how-to/how-to-print-from-a-chromebook/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
I have the Photosmart C6280 All-In-One and it doesn't like printing on cardstock - jams. Any tricks I should know, or am I just out of luck. HELP
I have the same problem with my HP psc 1300 all-in-one. In fact, I can't get it to print reliably on anything but plain inkjet bond paper. All the other paper options listed in the print window are useless -- photo, cardstock, whatever. I've been trying all day to print on Avery 8387 postcard stock. It prints the first two lines, then claims there is a jam, and ejects the paper. I see by the date on your query, and the date on some of the other queries, that many of these questions go unanswered for days, months, and even years. It would be nice if HP would occasionally read through these posts and contact their customers with some suggestions! I'm about ready to throw this printer in the trash and buy and Epson -- or something that really will do what it says it will do!
-
Unable to Print on CardStock. I am using the HP 8600 Premium AIO
Printer : HP 8600 Premium AIO
I have bought the printer yesterday and I have changed the printer setting to use Card Stock. Still it does not print.
Please help.
Thank you,
Best regards,
SoumitraTravis,
I have tried the solutions below from the link
Solution one: Restart the All-in-One
- I have done this a couple of times. Regular paper prints fine.
Solution two: Check the condition of the paper, and then reload it
- Just purchased the paper with the printer. I have tried to loosen them, sometimes it helps.
Solution three: Clean the paper rollers
- Brand new printer, it has barely printed 25 sheets. Also regular paper prints like a breeze.
Solution four: Reset the All-in-One
- Tried this, regular paper prints. Cardstock is still not printing
Solution five: Adjust the paper settings in the print driver
- I have done this. It was mentioned in one of the posts that the rollers need to adjust to pick up thicker paper.
( I wish I could attach the images, but not able to get the popup to add the images)
Solution six: Service the All-in-One
- Trying to avoid this for now.
Thank you,
Best regards,
Soumitra -
Advice on printing to cardstock
I have a new CM1312nfi MFP and am trying to print some invitations on cardstock 5"x8" sheets.
I have loaded the sheets in the tray similar to how envelopes are loaded.
After each page, the printer goes through a cleaning cycle for several minutes.
Also, an error "Unexpected page size detected. Click OK to continue" comes up.
This is frustrating, and so is HP's tech support -- any tips on how to print to cardstock?
Thanks!I think you would know how to retrieve content of an HTML page using the URL object. Just in case.
My apology if this short note doesn't help you at all. -
Printing on cardstock wih Officejet 5745
I need to print heavy cardstock invitations 5 X 7. I worry the paper will either jam or refuse to make the turn. Solutions?
Hi @Ole-Prof,
Welcome to the HP Forums!
I noticed that you are trying to print on heavy cardstock invitations 5 x 7 with your HP Officejet 5745. I am happy to look into this for you!
According to your printer's specification's, this is an unsupported paper size for this printer. The supported card sizes are:
Paper type
Paper size
A4 index card
210 x 297 mm (8.3 x 11.7 inches)
A6 card
105 x 148 mm (4.1 x 5.8 inches)
Borderless A6
105 x 148 mm (4.1 x 5.8 inches)
Borderless Hagaki*
100 x 148 mm (3.9 x 5.8 inches)
Hagaki*
100 x 148 mm (3.9 x 5.8 inches)*
Index card
76 x 127 mm (3.0 x 5.0 inches)
Index card
89 x 127 mm (3.5 x 5.0 inches)
Index card
101 x 152 mm (4.0 x 6.0 inches)
Index card
127 x 203 mm (5.0 x 8.0 inches)
Index Card Letter
200 x 148 mm (7.8 x 5.8 inches)
Japanese postcard
100.1 x 148.1 mm (3.94 x 5.83 in)
Hagaki*
200 x 148 mm (7.8 x 5.8 inches)
*The printer is compatible with plain and inkjet Hagaki from Japan Post only. It is not compatible with photo Hagaki from Japan Post.
However, If you are using Windows 7 and above, you might be able to assign an alternate driver, by going to this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by @Shane_R, and then trying a custom paper size. Otherwise, I would suggest to use one of the supported paper sizes mentioned in the chart above.
Hope this information clears things up for you, and thank you for posting!
“Please click the Thumbs up icon below to thank me for responding.”
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
I have a hp 2600n printer and when I print cardstock the cards come out with a black tint covering the entire card.
I already changed the settings on the printer to cardstock setting yet it hasnt solved the problem fully.
Does anyone know how to solve this problem? ( i hope my cards arent too thick)
ThanksHi dh1234,
I suspect your question would be better answered in the HP Enterprise Business Community, as the HP Color LaserJet 2600n Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP Color LaserJet 2600n Printer support page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
PO print for fax/email transmission
Folks,
Have a generic query. How would you print the POs that were transmitted by FAX or EMAIL without adding a new message type?
The users in Prod. system have access to ME23N alone. If the message type was set as print, then no issues as they could go ahead and just reprint it.
However for the POs set as FAX/PRINT, the print icon does not appear.
What is the way out then?
Have tried with SP01, but could not get the PO print.
How is the spool no. found for a given PO. I checked in the processing logs for the messages, it said 'No processing log exists'.
Regards,
Sameerdo u wanna say u havnt configure print medum and u need to have print
or u have took fax or mailed it and now u need to take print
for case 1 print not possible
for case2 go to me9f select sucessfully processed and give po nno
u will get the entry select it go to message details then here add new output for print and save
please clerify ur question
regards
kunal -
Excise invoice Print for multiple invoices
Hi All ,
i have developed a z smartform and attached to standard tcode J1IP o/p type J1I0 . The o/p is comming fine when i select one excise no after excecuting tcode J1IP But if selected multiple invoices by checking the checkbox and press print preview or print
button each time it is giving print preview/print diaog. i.e i need to execute print for first invoice and again i have to come back and again it will ask print prview/print dialog for second like wise n times for n no of selected documents .
my requirement is like when i execute tcode J1Ip and when i select multiple invoice i should get only one print preview or print dialog for all documents . how to achieve thisHI friend,
Its simple.
Put all the invoices in a single loop. I think you will be calling the smartform function module for each and every invoice. Don't do like that. Just collect all the invoices in the final table first and after that display the invoices.
I think you can understand what i am saying.
Please try and let me know if you have any queries i will help you.
Thanks,
Sri Hari -
I have reports in SSRS. I am using remote reports. Reports have multiple pages.
In IE, the print button displays, but in Firefox and Chrome, it does not display.
Below links shows how to display the print button for mozilla and chrome. These solutions only fire the print for the
current page in the report viewer-
http://stackoverflow.com/questions/951009/sql-reporting-services-print-button-not-shown-in-mozilla
http://stackoverflow.com/questions/4208457/ssrs-print-button-in-chrome-and-firefox
I need to be able to issue a print command for all
pages in one go from the reportviewer.Hello,
The common workaround about print button on ReportViewer control for non-IE browsers is add ActiveX print control or create Print function. It has pros and cons.
I am not good at programming. But you can try to disable page breaks by setting InteractiveHeight to 0 so that the report will rendering in single page with Report Viewer control.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
I have to design forms that are fillable electronically and by hand. The problem that I am running in to is supplying multiple lines that will print for people that are hand filling the form. I have tried to add an image of lines behind the text field, but these would get in the way when the form was filled in electronically.
I am using LiveCycle Designer ES2 v. 9.0 on a Windows machine.
Thanks.Ok.
Take a textfield
Go to Object | Allow multiple lines
Go to Layout | Height | activate "Expand to fit"
Go to the initialize-Event or readyform (You have to change the _ for your textfield) this.rawValue = "___________\n___________\n___________";
Go to the enter-Event this.rawValue = null;
Go to the exit-Event
if(this.rawValue == null)
this.rawValue = "___________\n___________\n___________";
}else{}
With this solution you can simulate the same as pattern see above.
I hope this is helpfull for you,
Mandy -
Condition records- setting printer for multiple vendors at the same time
Hi all,
I have maintained condition record for POs for Key combination of Doc type,Purch Org and vendors.Now for a particular doc type and P.Org , I have around 50 vendors. I need to change the printer for all these 50 vendors to 'printerx'.Is it possible? I tried selecting multiple vendors at a time and changed the printer but its not working.Hi Saurav ,
You can achieve this through SCAT transaction.
For running SCAT take the help of ABAP team.
I hope u might be having the list in the form of text file.
If not , download the same from NACH table.
Regards
Ramesh Ch
Maybe you are looking for
-
How to create transaction for table maintinance generator
what is the procedure(steps) to create transaction for a table maintinance generator
-
Use of "NEW FROM PACKAGE" in SAP 8.8 And Master Layout creation
Dear Expert, A) How to use "NEW FROM PACKAGE" option at time of choosing company. and also how to create .pak file ??? Even I don't know by using this feature what are the scope. B) How to create master layout in 8.8 when I am using crystal Report. T
-
How could you foist Firefox 4 off on us without warning about the problems? At least some of your complainants told me how I could get back to v. 3.16, I have saved it and will try to re-install over this. I have Windows XP on a 3-year-old computer w
-
Layers in DW not working! HELP!!!!
Don't know what's going on with my DW MX 2004. I created layers with no problems until now. I'm in the right mode (Layout, Standard) when I click on the Layer icon (or use Insert, Layout Objects, Layer) nothing happens on the page, and can't draw it
-
Batch JavaScript Fails to Save PDF from XDP
I generated hundreds of XDP files from a database query and need to merge them with a PDF template. Using Acrobat Pro 8 interactively allows me to do this by opening the file and then saving it, but I need to do this for hundreds of files. So, I cre