Printer has gone with the wind?

Strange thing happened yesterday... I was trying to print some documents, but there is no printer anymore. I have MBP connected via Airport to Telewell ADSL modem router and my printer (Xerox Phaser 8500) is also connected to the router. If I use direct IP adress, I can communicate with the printer and print build-in manuals and other stuff, but if I try to print something else, like .doc or .pdf or anything, there is no printer awailable. I try to find Phaser via "Print & Fax" but no show, MBP cannot find it. ?????? What can I do? Help, please!!!
tribuuni

It does not, been tested that already, nobody home....
tribuuni

Similar Messages

Screen Light. (Gone with the wind)

how to I get my screen light to come back on. the ipod works and i have memorized all the touch applications but the screen light does not work. suggestions anybody?

When you Reset the iPod (restart it), do you see the Apple logo? This is the Reset procedure, if you've never done it.
How to reset iPod
If the screen is dark during the Reset, it may be a hardware problem. If the backlight is ON during the restart, but then goes off, there is actually a setting that keeps the backlight OFF (at least on my older iPod nano). If the screen is still working with no backlight, you should still be able to read it under a bright light. Go to the iPod's Settings screen, and set the Backlight so that it is not OFF.
You may also want to try doing a Restore, if the above is not helpful.
Restoring iPod to factory settings

Airport Express Gone With the Wind!

I recently bought a new PB G4 17-inch laptop (non-Intel version) to update/replace my 15-inch PB G4 Titanium laptop (which I plan to give to my oldest son).
I transferred all the files from my old PB through the firewire cable option. It did a great job. Everything seemed to work, except my Airport Admin Utility (AAU). It shows no sign of my airport express. Even when I rescan, there is no sign of it (and I rescanned a dozen times!).
This morning I turned on my old PB and checked the AAU. Everything was fine. The airport express was visible and working.
My question is this. How can I get my new PB to "pick up" the airport express? The airport tab that shows the signal level tells me the new PB is not part of some special access list. And that I must see the administrator.
I don't understand any of this!!

Steve
See this article, Resetting AirPort Express, scroll to the bottom to Factory Reset.
Do one of these and then set it up again, AirPort Express Setup Guide.
Will
1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini Mac OS X (10.4.6) Please help others by marking questions as Answered (+perhaps Solved or Helpful)

I cannot open iCal because of a problem. Can anybody help me? The computer will not allow it to open and sends a message to apple each time. The icon has gone from the dock, but ical works on my iPad and I am afraid to sync it with my computer.?

I cannot open iCal because of a problem. Can anybody help me? The computer will not allow it to open and sends a message to apple each time. The icon has gone from the dock, but ical works on my iPad and I am afraid to sync it with my computer in case it wipes everything .

I have the exact same problem. I have not changed anything. This is probably a bug or something that has gone bad with Mac OS X (10.7.2). I have not found any solution for this on the web.
MacBook Pro, Mac OS X (10.7.2).

I am trying to set up iTunes match on my apple tv, but it just keeps showing that it is loading, it has been running for over an hour, what can be done here, it has gone with no problem on my iPhone, iPad but not the tv

i am trying to set up iTunes match on my apple tv, but it just keeps showing that it is loading, it has been running for over an hour, what can be done here, it has gone with no problem on my iPhone, iPad but not the tv

Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

I've a few issues, my old computer was out of memory and i changed to a new one which was already on another itunes account. When i upgraded to os5 my library has gone it has synced with the new computer - how do i restore the old ipad information? ple

I've a few issues, my old computer was out of memory. I changed to a new one which already had another itunes account (for my business) when i upgraded to os5 my library has dissappeared as it has syncd with the new computer. Is there any way i can restore the information previously from my ipad? really appreciate any advice thanx in advance

Lynda-
If you still have the old computer, you should be able to connect the iPad, run iTunes and restore from a backup from a previous sync. Now that you have it updated, you will not need to do that again.
Fred

TS4006 my iphone has gone into the lost mode and i have tried to reactivate it with itunes but its not working. itunes says i should insert the simcard pin code but there is no option for me to do that on the phone or itunes. please help........

please help my iphone 4s has gone into the lost mode and i cant re-activate it i dont know what to do. Itunes needs me to put the Simcard pin but i dont have any option for that.

Hello Buzzy78,
Try to put your iPhone in Recovery mode and then Restore it to Factory settings and see if you are able to get into your iPhone.
Recovery Mode : http://support.apple.com/kb/HT1808

Itunes locks up my computer every time I try to start it. This has happened with the last few updates so I have not used it.

itunes locks up my computer every time I try to start it. This has happened with the last few updates so I have not used it.

Hello oldsurfer250,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iTunes for Windows issues:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717http://support.apple.com/kb/ts1717
If iTunes for Windows Vista or Windows 7 won't open, stops responding, or unexpectedly quits, try using the steps below. You may want to print this document before following these steps.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

How do I get System.out.format to print out doubles with the same precision

Using the System.out.format, how do I print out the value of a double such that it looks exactly like it does if it were print from a System.out.println.
For example, take the following code:
double d = 12.48564734342343;
System.out.format("d as format: %f\n", d);
System.out.println("d as sout: " + d);Running the code, I get:

d as format: 12.485647
d as sout: 12.48564734342343

The precision of d has been lost.
I could bump up the precision as follows:
double d = 12.48564734342343;
System.out.format("d as format: %.14f\n", d);
System.out.println("d as sout: " + d);That appears to work, I get:

d as format: 12.48564734342343
d as sout: 12.48564734342343

However, that solution fails if d has a different precision, say 12.48. In that case I get:

d as format: 12.48000000000000
d as sout: 12.48

So how do I get System.out.format to print out doubles with the same precision as System.out.println?
Thanks..

YoungWinston wrote:
Schmoe wrote:
Interesting, but this is not what I am looking for...Your original question was "how do I print out the value of a double such that it looks exactly like it does if it were print from a System.out.println", and you've been told how to do that (although the pattern given by sabre may be a bit excessive - you should only need 15 '#'s).The initial phrase from my question was "Using the System.out.format, how do I..".
It's worth remembering that, unlike the Format hierarchy, 'format()' is NOT native to Java. It's a convenience implementation of the 'printf()' and 'sprintf()' methods provided in C, and first appeared in Java 1.5. Those methods were designed to produced fixed-format output; 'println()' was not.Perhaps it is the case that this can't be done.
Furthermore, Double.toString(), which is what is used by println() does not produce the same format in all cases; format("%.14f\n", d) does. TrySystem.out.println(1.8236473845783d);
System.out.println(1823647384.5783d);and you'll see what I mean.I am fine with that. It still displays all the precision.
I am simply looking for a way to quickly print out multiple variables on a sysout while debugging. I want it as syntactically sweet as possible. System.out.println can be a pain when outputting multiple variables like the following:
"System.out.println("a: " + a + "; b:" + b + "; c: " + c);"
For some reason, my fingers always typo the plus key.
I was hoping that System.out.format would be easier,along the lines of:
"System.out.format("a: %f, b: %f, c: %f\n", a, b, c);"
From a syntactical sweetness point of view, it is easier. However, the %f on doubles truncates the precision. I figured there must be a way to get the full precision.
DecimalFormat is syntactically sour for this purpose, as you need to instantiate the DecimalFormat.
fwiw I have enjoyed reading the suggestions in this thread...

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Just downloaded the new OS for IPhone. Despise the appearance. It has jacked with the way I like things in some unacceptable ways. Is there any way to keep the OS, but return to the old appearance? Important to know BEFORE I download OS for computer.

Just downloaded the new OS for IPhone. Despise the appearance. It has jacked with the way I like things in some unacceptable ways. Is there any way to keep the OS, but return to the old appearance? Important to know BEFORE I download OS for computer.

I know I am responding to my own thread, but I an SOOOO disgusted with Apple right now.
The new iOS 7 was the lead story on CNN today... and it wasn't positive. Easy to see why, it's a graphics disaster. It is ugly, difficult to read, doesn't interface aesthetically with the iPhone 4S, and gives everyone in America vertigo. Either fix the appearance, or find some way to allow us to roll back to our previous iOS. Do so quickly, or this life-long Apple customer [circa 1978] will be moving on. If this represents shades of what is coming with OS Maverick, I am petrified. Further, I am a GM of a chain of newspapers and websites in the Austin, Texas area. I will be ripping out a scathing editorial. The notion that we can't roll back from something millions of us hate is despicable. I'm giving you one week. Be sure I am not alone.

Camera roll has gone behind the "Albums" title bar. How do I get it back?

My camera roll album has gon behind the "Albums" title bar. I cannot now access my photos. How do I get it back to its normal position? I have tried syncing.

Do a forum search. This is asked and answered many times.

Am considering buying a Time Capsule. But all specs I read about it (re: printing) is how to hook up a printer via USB connection. Need to confirm...that a wireless printer will work with the router feature of the Time Capsule. I assume yes...?

Am considering buying a Time Capsule. But all specs I read about it (re: printing) is how to hook up a printer via USB connection. Need to confirm...that a wireless printer will work with the router feature of the Time Capsule. I assume yes...?

A wireless printer connects to the network just like your computer, or iPhone/iPad, etc. connects using wireless.
The printer must be set up intially to scan to "find" available wireless networks, then your specific wireless network needs to be selected. Then the password for the network needs to be entered.
Once the printer is configured to join the network, it is always connected to the network. No further configuration is required.

I am running windows 7 64bit, have a brother printer MFC-J4510W with the latest driver update, have Adobe reader 11.0.10.32 and as of today I cannot print any pdf files that before I could, all help appreciated

I am running windows 7 64bit, have a brother printer MFC-J4510W with the latest driver update, have Adobe reader 11.0.10.32 and as of today I cannot print any pdf files that before I could, all help appreciated
I followed the FAQ troubleshooting and that didn't help

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

What is the best all in one printer that works with the iPad

The best all-in-one-printer to use with the ipad mini

Any that advertise Airprint compability will work for printing. Note that you can't use the scanning or faxing features of an all-in-one with an iPad.
See the Airprint printers on the Apple store site:
http://store.apple.com/us/ipad/ipad-accessories/printers#!
Matt

Printer has gone with the wind?

Similar Messages

Maybe you are looking for