Printer has new all new ink and still will not print

I just got back to school and unpacked my HP Photosmart 5514 CQ183A printer. Upon trying to use it I noticed the ink was empty, so I went to the store and bought brand new 564 ink in every color. I installed them all properly and went to print again, and it still did not work. So I pressed "clean printhead" in the tools menu. Ink slowly started to appear on the paper so I "cleaned the printheads" a few more times until it was all perfect. I then printed what I needed, turned my printer off and went to sleep. This morning I woke up and tried to print again and it is doing the same exact thing as last night. Worst part is, it says all of my ink except for black is now empty. How can that be when I just bought all of them last night and only cleaned the printhead 8 times and printed 2 pages of only black ink the night before??
I bought the printer in late June of 2012 and I only use it when I am at school 7 months out of the year. When I pack up and go home I put the printer back in the box with all the orginal packaging. I do not understand why a printer that has only been used for about 14 months is haveing this problem!

Hi hellohpthisisst,
Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5514, you are unable to print after replacing the cartridges.
I see you have done the printhead cleaning a few times to try and fix the ink issue you were experiencing, please remember when doing service tasks on the PS 5514 it will use some ink. However you're right, the cartridges should not be empty. I would like you to take a look here and make sure the cartridges are properly vented: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages.
Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
If you are still running into print quality issues, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
I hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

Can't sync new contacts from Outlook to iphone 6. Turned off all add-ns and still will not update.

Did the suggestion on the Apple site for contacts. When I do the sync I can see the new contact in my contact list then it goes away when the sync finishes.

@ Laurent P.
Some things to try.
Reset Sync History. To do this on a Mac, open iSync in your Applications folder. Once open, click the iSync menu and choose Preferences. Small window opens with a Reset Sync History button. Does not delete any data, just don't expect your next sync to be super quick.
Also, under the Info tab in iTunes, choose the Advanced option of replacing everything on the iPhone with what is on the computer. If it works, be sure to uncheck that setting. I think it is a one time check only thing, but be sure.
Wait...
I just noticed you said MobileMe...if you use MobileMe to sync your stuff, flip Contacts Off then back On. If that doesn't work, delete the MobileMe account on the iPhone and re-add it.
Otherwise, try a hard reset (both buttons for about 10 sec. ignore slide to power off), and reset network settings.
Also, does the Mac contacts show up in MobileMe? If they don't, go to System Preferences > MobileMe > Sync tab and check your settings. Perform a sync too. Under the Advanced button you can Reset Sync Data and choose to replace MobileMe stuff with stuff on your computer or vice versa.
Message was edited by: TonyElTigre
I am a former .Mac user. I have both @mac and @me. No issues here after 2.0.2.
Message was edited by: TonyElTigre

All non-Apple apps will not open on my phone. I restored as a new phone and still will not work

All non-Apple apps will not open on my phone. I restored as a new phone and still will not work

Hello there, KScotty.
The following Knowledge Base article offers up some great steps for troubleshooting apps installed on your iOS device:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I have Lightroom 3 and have downloaded the DNG CONVERTER 8 7 1 to be able to open my CR2 files from my new canon 7d, however It still will not open my images

I have Lightroom 3 and have downloaded the DNG CONVERTER 8 7 1 to be able to open my CR2 files from my new canon 7d, however It still will not open my images

Fab ! Thanks so much. Sorry if these questions are rudimentary but i have been out of the game for a while and getting back into it, i have aged and technology has expanded! Am trying to re learn and keep up ! I appreciate the help

TS1362 I downloaded two cd's last night and I am un able to play some songs cause it tells me I am this computer is unauthorized to play some songs,I did what it said about going to store to get authorized and still will not work,not happy at all!

I downloaded two cd's last night and I am un able to play some songs cause it tells me I am this computer is unauthorized to play some songs,I did what it said about going to store to get authorized and still will not work,not happy at all! I NEED HELP OR MY MONEY BACK NOW!

There seems to be an occasional issue with downloads from the store. They prompt for authorization when they are in fact corrupt/incomplete in some fashion. Try deleting the problem tracks (do not hide from iTunes in the cloud), close iTunes and reopen, go to iTunes Store > Qucklinks > Purchased > Music > Not on this computer. Select a few tracks to download then click the icon that appears at the top-right of the iTunes window.. Untick the box that reads Allow simultaneous downloads. Proceed with the rest of your eligible purchases.
If you still have a problem use the Report a problem links in your account history to contact the iTunes Store support team.
tt2

How many times can I attempt the passcode before I can't enter it any longer...it has been over 3 hours and it will not let me re-enter it?

How many times can I attempt the passcode before I can't enter it any longer...it has been over 3 hours and it will not let me re-enter it? My daughter forgot the new code she put in....

What dowes the screen say? If it just say disable and gives not time to retry then you have to restore the iPod
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Acrobat X and XI will not print many pdf documents.

Acrobat X and XI will not print many pdf documents. When I click Print, the document fades and I get a dialog box that says "Adobe Acrobat has Stopped Working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I was experiencing this with Acrobat X so I upgraded to XI, but the problem is exactly the same. I am using Windows 7 Professional operating system.

Thank you for your reply. I have several printers available on our network,
the program doesn't even go as far as allowing me to select a printer. I am
trying to print to an HP 1320n or a LANIER MP C5502 PCL 6. I have changed
the default printer, but the result is still the same. In does the same
thing with Adobe (Standard XI) PDF set as the default printer.
Stan Reznicek
WinWholesale
3110 Kettering Blvd
Dayton, OH 45439
937-294-4249
[email protected]

ITunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

iTunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
tt2

I cannot seem to load raw images into LR 2.5. I've been using this for years. I always load from memory card, but it gives me an unknown error message. I tried to load from camera, hard drive, & external drive and still will not work. I checked import

I cannot seem to load raw images into LR 2.5. I've been using this for years. I always load from memory card, but it gives me an unknown error message. I tried to load from camera, hard drive, & external drive and still will not work. I checked import menu and nothing has changed. I loaded the photos onto my tablet and images are fine, so do not feel it is the memory card. Any thoughts?

The error message probably said "unsupported or damaged"
The T3 requires Lightroom 3.4.1 or later. You can either upgrade to a more current version of Lightroom (version 5.6 is the most recent) or you can use the free Adobe DNG Converter to convert the RAWs to DNG, which should import into Lightroom properly.

I have had problems with iTunes lately it says iTunes was not installed correctly and to reinstall I tried 3x and still will not. Now I get msg it can not start because MSVCR80.dll is missing reinstall to fix??

I have had problems with iTunes lately it says iTunes was not installed correctly and to reinstall. I tried 3x and still will not. Now I get a message it can not start because MSVCR80.dll is missing reinstall to fix??

See Troubleshooting issues with iTunes for Windows updates.
tt2

Have file in Trash and can not empty trash . Showing 63 files and tried to shut down and restart and still will not empty

Have file in Trash and can not empty trash . Showing 63 files and tried to shut down and restart and still will not empty.Anyone know what can be done?

You are welcome. Glad I could help/
Allan

I just installed a multifunction Lexmark Pro905 printer and it will not print from Firefox, but will from Explorer????

I just installed a multifunction Lexmark Pro905 printer and it will not print articles from Firefox, but will from Explorer??? Are there settings in Firefox to solve this??

When you initiate printing with {Ctrl + P}, are you able to select that printer in the Printer - Name box?
http://kb.mozillazine.org/Problems_printing_web_pages

Hello this is the first time I have ever had a problem. I am trying to down load a movie and it keeps giving me error -50. I have signed out and back in and deleated the download and tryed again and still will not download.

Hello this is the first time I have ever had a problem. I am trying to down load a movie and it keeps giving me error -50. I have signed out and back in and deleated the download and tryed again and still will not download.

Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Sign in to itunes store will not disappear and the whole IPad will not let me go into other screens till this pop up goes away. I have entered the password several times and still will not disappear. Turned the IPad on and off but the pop up remain

sign in to itunes store will not disappear and the whole IPad will not let me go into other screens till this pop up goes away. I have entered the password several times and still will not disappear. Turned the IPad on and off but the pop up remain

FIrst try a soft reset by holding down the home & sleep/wake buttons until the Apple logo appears then let go & let the iPad boot up normally.
If that doesn't help then to make sure you have a strong internet connection.
Try resetting Network Settings
Settings->General->Reset->Reset Network Settings,
You won't lose any data but will have to log back into your wifi networks.
Once logged back in and when the pop-up appears, try entering your password again.

I'm trying to get my new airport extreme to print wirelessly to my samsung clx usb printer and not having any luck. I downloaded the bonjour print wizard and I know there's a signal going to the printer, but it still will not print? Any ideas?

I'm trying to wirelessly print to my samsung printer. I've downloaded the bonjour printer wizard and could tell that a signal was going to my printer but it still would not print. Anyone have any ideas?

You didn't state how it's connected to each computer, if it's connected through your router then it should work. If it doesn't then you need to contact Canon and ask for assistance.

Printer has new all new ink and still will not print

Similar Messages

Maybe you are looking for