Printer has to turn off and on, whenever I restart computer for wireless connection

The wireless connection gets lost, when I restart the computer or turn off the computer and turn it on again. So, I need to restart the printer to get the connection. I want to have to wireless connection without turning off the printer and turn it on again. is there a way?
Thanks.

in addition, check out this link:
Troubleshooting security software issues
as well, see this discussion concerning bonjour being a possible culprit.

Similar Messages

HT4623 hello my iphone which has battery has been turned off and can not start it up

Hello
My Iphone 4 GSM which has battery has been turned off and I can not do nothing , not turn on

Hi Mineh,
Welcome to the Support Communities!
The following article will provide some troubleshooting steps for this issue:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281?viewlocale=en_US
I hope this information helps ....
Have a great day!
- Judy

My ipod has just turned off and wont come back on

my ipod has just turned off and wont come back on but i know it had a good amount of battery left and if i plug it into my computer or docking station nothing happens please help...

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I tried restoring my iPod, but it told me it was unsuccessful. Now it's stuck at the connect to iTunes screen. I've tried holding the home and lock buttons, just until the unit turns off, and until the unit restarts. What do i do?

I tried restoring my iPod, but it told me it was unsuccessful. Now it's stuck at the connect to iTunes screen. I've tried holding the home and lock buttons, just until the unit turns off, and until the unit restarts. What do i do? iTunes wont even recognize that an iPod is connected.

Try to connect in reocvery mose, explained in this article:
iOS: Unable to update or restore

Hi... Iphone 4 has just turned off and I can't turn it on. what the matter could be. please anybody help!

The first time it was when I had gone to vacation to Turkey. On the second day of my vacation it turned off and then turned on after a few days when the battery was low!I pluged charge in and everything was ok. And today, since 3 weeks, it behaves the same!

My iPhone did the same about an hour or so ago. I've tried to reset it but it doesn't work. It has happened once and at that Time the device was vibrating from time to time. At the store they reseted it ( my pré joue attempts to do so had just faire like tokay). Help !

My iphone 3gs has completley turned off and will not switch back on with a full battery.

my iphone 3gs has completley turned off. it is fully charged but will not switch on. i have connected it to itunes and it is not recognising the device. i have tried to reset it and this will not work either, and i have tried to restore it by holding down the home button but the apple sign will not come on. i dont know what else to try, any ideas?

Try here. iPhone and iPod touch: Frozen and unresponsive

C4795 Printer Won't Turn Off And Small Screen Is Frozen

My HP Photosmart C4795 printer that I purchased Sunday, April 10th is having an issue where once I turn it on, I cannot turn it off. The small screen has the HP logo on it and a little bar on it that doesn't seem to fill up; it just seems to shimmer if that makes sense. Since the menu on the built-in screen is inaccessible, I cannot copy anything as well.
My Service ID number is 20101 and it is connected using the USB cable.
Could someone please let me know what I can do?
I have already uninstalled and reinstalled the software to no avail. Thank you for your time.

Same issue, printer goes into la-la land when attempting to shutdown. I've downloaded the Firmware update dated Feb 2011 which is supposed to fix communication issues. I've connected the printer back via USB and it's still not responsive. I've uninstalled/reinstalled a few times. All I see in these forums is people stating the same issue over and over, but no solution. Here I am adding to the clutter. I know I'm out of warranty, so I gues I get what I pay for, but I do know I've worked with a DELL and a LEXMARK printer and the only reason I had to replace, was because they died of old age or had a close encounter with the tile floor after an exhuberant New Yea's Eve party. I've tried the Diagnostic Utility - taht was a waste of time. it's a diagnostic utility but it asks YOU if everything is ok. If you answer know, it directs you to the support site and forums. Does anyone know if there is some hard-reset function? I'ts Superbowl Sunday, and I'm feeling like kicking a field goal except the football has an HP logo and a paper tray...

All my prints using: Lightroom 5, printer color management turned off, and non-generic ICC profile (e.g. Epson Premium Glossy) have magenta tint or cast

I'm using PC with: Windows 8.1, 64bit, Lightroom 5.4, Epson R3000, 6.75 (latest) driver, color management turned off in printer settings, Lightroom configured to manage color. If I use a generic ICC profile such as Epson sRGB, the prints look OK. But when I use any ICC profile dedicated to my paper and printer combination, such as Epson Premium Glossy, or one created using ColorMunki print profile, the prints all have a medium to heavy magenta tint or cast. The effect can be seen before I even print in the Epson Print Preview. Yet when I soft proof, I don't see this effect. I suspect the problem lies somewhere in the CMM process, but I can't pin it down. Any tips or suggestions are appreciated.

Thank you kindly for your insightful response. As it turns out, the answer is half correct. I've found others who'll say the same thing, that double color management will lead to a very magenta result. I believe this was certainly the case when I first started playing with the settings, Where I went wrong, is that after I corrected my settings by turning off printer manages color and letting Lightroom do the color management, is that the Epson Print Preview was still showing magenta with certain profiles. Not wanting to waste more money on paper and ink, I used the preview to gauge whether I was going to get a normal print or not. Then one day I ignored the print preview's magenta cast as a 'warning' and I went ahead printed the photo anyways. Because I used a profile that I created with ColorMunki Photo, the picture came out perfect (i.e. a very good match to what I was seeing in Lightoom on my monitor). The lesson learned is that for judging the final color correctness, the Epson Print Preview can be way off target and your best bet is to ignore it.

My iphone has suddenly turned off and won't turn back on

This is a replacement phone as mine broke after updating I've only had it 3 months and now it's suddenly gone off and won't turn on I've tried the reset but it's totally blank if I return to the shop will I be made to pay again for a replacement??

You say your tried a reset, holding the sleep/wake and home buttons until you see the Apple logo? How long did you hold the buttons, it could take up to 30 seconds of holding for it to work. If this doesn't do it, then plug the device into the charger for a minimum of 30 minutes, then try the reset again. If you still cannot reset the device, make an appointment for the Genius Bar. Paying for a replacement depends on the warranty status of that device.
If your other device was under warranty, the replacement would have a warranty of 90 days or the balance of the original phone warranty, whichever is the longest.

HT4995 My location has been turned off and won't turn back on how do I trouble shoot this

I cannot turn on my location services and my AT&T Data is not responding appropriately either! The key board is acting strange like a remote app is typing

Did you already try to reset your device by holding the sleep and home button for about 10 sec, until the Apple logo comes back again? You will not lose data by resetting your phone.
If this does not work, try to set it up as new device, explained in this article:
How to back up your data and set up as a new device

My iPhone has just turned off and I knew it had about 50% charge. Now it won't charge, turn on or do anything when I plug it into my mac. Can anyone help?

Would be very grateful if someone can help me out ?

@JamesStacey - Paulcb is right. You should try to to a reset as he suggested. I had this problem with my new iPhone 4S a couple weeks ago. It just shut down without warning and I couldn't get it to start again. I tried repeatedly to do a reset and I kept releasing the sleep and home buttons after about 15 seconds and nothing was happening.
I finally decided to see what would happen if I held the buttons down longer. I held them for over a minute, possibly over 90 seconds, I wasn't counting but I know it was definitely over a minute, and finally the apple logo appeared, my phone reset and it was fine.
I'm not sure if this is a glitch with the OS, the hardware, a combination of the two or possibley even a combination of the OS, hardware and one or more of the apps I have on my phone.
But just to let you know this only happened once and there was no loss of data, files, apps, photos, music etc.

My Ipod nano 4th generation just turned off and I can't restart it. Tried all the troubleshooting tips. Can't find the issue.

My three year old ipod nano 4th generation has been working fine all these years. Suddenly, last week, while it was low on battery (not completely drained), it shut down and I cannot restart it. I have tried all the troubleshooting issues and still did not manage to turn it on. Though. when I press center and menu while connected to my computer, the computer bips has if it recognized that something is trying to connect. Though, it cannot identify it and the iPod remains shut down. I cannot find the issue, perhaps I need a battery replacement?

acwiz wrote:
My three year old ipod nano 4th generation I cannot find the issue, perhaps I need a battery replacement?
It's possible. Just take the iPod to an Apple store or an AASP. Whichever is more convenient for you.

T410 System slow in bios post and turns off and on again during restart

I encountered this system when it came to upgrade from winxp to win7 at my company.
We want to have the same bios version on all systems and this one had an outdated bios so I did a upgrade to 1.35.
To finish the upgrade you need to press enter to restart the system. It took about 30 sek for the system to reboot after I pressed Enter. That was the first clue that the system was acting weird. After the bios upgrade I noticed that when a restart is initiated by the OS, the laptop shuts off for 10 sek and then turns on again. This then triggers Power On password. Normally there is no POP during restart.
I tried upgrading the bios to the newest version 1.36 but no change.
Solved!
Go to Solution.

hey grimworld,
curious to know, did you perform a firmware update as well ? If not, go to http://support.lenovo.com
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

HT201401 since iSO 7.02 update bluetooth with my car is no longer working at all. also can no longer access my mail! the browser is turned off and I can not turn it back on!!!!!

last week my phone was automatically updated after a trip to Europe, now I can no longer access gmail because the browser capability for cookies has been turned off and I can NOT get it back on. Before the trip bluetooth was on partially working with my car and now since the newest update works no more in any form. Anyone else having these problems? Need help!!

As far as automatic update, the iOS cannot be updated without user intervention, so it could not have been automatically updated.
You need to provide more information about your mail. Does this mean you cannot access the Mail app, you cannot download mail, or what? Not sure why you cannot access the cookies setting in Safari. Go to Settings>Safari>Block Cookies>set to what you want.
Problems with 3rd party Bluetooth devices, such as car audio, etc., generally has to do with vehicle manufacturers not providing updates to match the current Bluetooth stacks that are found in today's phones. You can go into the phone and remove the pairing for the car, and then go into car settings and remove the iphone. Then put both devices back into pairing mode and attempt to connect them again. See this support document http://support.apple.com/kb/TS3581

My iPhone 5 randomly turned off and it now won't turn back on. It had around 80% battery life left. What can I do?

I have an iPhone 5 which I got around two months ago now, it has been working perfectly but it has now suddenly stopped working. It has randomly turned off and it now will not turn back on. When I last checked it had around 80% battery life left, and I try to charge it now to see if it will have some life back in it, but nothing happens. What do you think I can do? Thank you.

press and hold the top power button and home button on the front for 6-8 seconds until you see an apple appear, then let go.
phone will start up now.
**Do not do this while plugged in to computer.

Printer has to turn off and on, whenever I restart computer for wireless connection

Similar Messages

Maybe you are looking for