Printer help / diagnostic to run?

Help! Not sure what has happened with my iBook, but yesterday I was printing fine with the iBook, but today I can only get one page of gibberish to print, followed by blank page after blank page, until I manually shut off the printer.
I have cleared all queues, deleted any old printers, and even reset the printer system, all to no avail.
Anyone have any ideas? Is there any diagnostic I can run to see if anything in particular is ailing my computer?
The only thing that has changed between yesterday and today is that last night I tried hooking up to my girlfriend's computer at home, and couldn't print to it, but I can't imagine anything could be related to that...
Any help is appreciated, frustration level growing exponentially...sigh.

Perhaps to try and re-install the printer software from the disc
included with the printer may help restore some functionality(?)
There may be something or another corrupted in the iBook's
system; so if you have a second user account, you could see
if that can be used to print documents using the existing driver
and printer software already in the computer. Some general
system maintenance may be performed which could help; such
as it is, with AppleJack and/or OnyX. These may not help the
CUPS printer system; there is a printer utility which may be in
the utilities folder. I don't think I've used it, but there is a tool
in the system to help with some issues. Maybe not this one(?)
And there also are several printer tricks (of which I do not know)
that likely may be out there, to be tried. So there yet may be hope.
Good luck & happy computing!

Similar Messages

  • "print quality diagnostic report"

    I have a HP Deskjet 3520 All-in-one printer and I just went to the "HP Deskjet 3520 series toolbox". Under the first tab (Device Services) is the button "Print Quality Diagnostics Page". I then clicked on that button and got the "Print Quality Diagnostic Report".
    However i can not find anything that tells me what all the diagnostics mean.
    attached is the document that I am talking about. 
    Questions:
    1.   The Magenta shows lines in the top of the lines on the top of the report but these go away at the bottom. Do I need to run a clean head cycle or seeing as that cartridge is low on ink just replace it?
    2.   In the bars of solid colors the light yellow (the bottom bar) has a white streak through it. Again I know it is low on ink. Is the issue there the ink level or does the head need cleaning?
    3.   Below those bars are numbered items about the printer but what does PHA mean? (Print Head Assembly?)
    4.   Number 22 in that list is PHA Drops. What does that mean?
    Does anyone know where I can go to get answers to these questions?
    Any and all help is appreciated.

    Hello RayGo75 ,
    Welcome to the HP Forums.
    I see that you would like some explanation on the Print quality diagnostic report.
    You stated that you attached a copy of the report that you would like reviewed but unfortunately, It is not listed on this thread.
    Please reattach it and I will be happy to go over it and explain any details that you need covered.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HP Photosmart 7510 - L:ooking at my Print Quality Diagnostic Reports - Why so many more "PHA Drops?"

    My Photosmart 7510 C311a indicates it has printed about 7500 pages since I purchased it in about November 2011.
    Tonight, after replacing the Cyan ink cartridge, I ran the cartridge alignment and then printed out the Print Quality Diagnostic Report.  As I was checking it out, I noticed the mention in 11, 12, 13, and 22 of the words:
    11.  PHA Installed:  01/24/2012
    12.  PHA TTOE Completed 1
    13.  PHA Hex ID: K: 3ff11948_5c3f230b, C: 00f11d60_5b421f06
    and on the line across the page for Item 22, with numbers under each color cartridge,
    (Cartridge Color)       Photo                  Magenta             Cyan                    Yellow                     Black
    22. PHA Drops          1493032000   4700387000   7245406000   51771850000   13001389000
    While these numbers are very large, I was curious as to how quickly the grew in the very short time (like five minutes) between the time I ran the first diag report and then aligned the heads and ran another diag report -- at the most it was five minutes and I printed nothing in between.  Then, after calculating the growth in each number, in about ten minutes, I ran another diag report and the numbers grew again.  For each color cartridge, over the three tests, with no more than ten minutes between tests and with nothing but the three reports printed, here are the three sets  of numbers  for "PHA Drops."
    Photo         1493032000        1494847000         1496485000
    Magenta    4700387000        4702380000         4704197000
    Cyan           7245406000        7247860000          7249779000
    Yellow        5177185000         5179178000         5180995000
    Black          13001389000      13008428000      13013963000
    Between the first and the second diag reports, the numbers for each cartridge increased by the following numbers:
    Photo           1,815,000
    Magenta      1,993,000
    Cyan             2,540,000
    Yellow          1,993,000
    Black            7,039,000
    I didn't bother to calculate the change in numbers between test 2 and test 3, but I suspect the numbers will be similar.
    My question is this:  What exactly is the definition of a "PHA Drop" and how does it fit into whatever the "PHA-related process" entails?
    I have read two or three "PHA Drop" related queries and answers on the HP Forums and the answers -- bluntly -- sound like the answer-maker either has no real idea what is involved - or - thinks nobody on the forum could understand the real answer.  Bad form..
    I don't think there is a 'conspiracy to deny' here and I don't even think the PHA Drop is something I must know about to sleep tonight -- but, it is an obvious and open part of the information that HP has seen fit to include in every Print Quality Diagnostic Report and one of the posted answers states that the whole PHA 'thing' is only used for "diagnostics." 
    Okay, diagnostics run by whom and when and where and for what purpose?  A really good, complete and accurate, fact-based answer might even help HP Users better understand the equipment we have spent good money to acquire and use.
    Answer please.
    Thanks
    This question was solved.
    View Solution.

    PHA stands for Print Head Assembly.  This is the assembly of the color and black printheads and the electrical interconnect. 
    PHA drops are the individual ink droplets printed.  An individual drop is very small, on the order of 5 x 10 ^-12 liters for color, perhaps larger for black.   I would not be surprised to see 7 million black drops on a page.  At 600 dpi one square inch of paper would take 360,000 drops so 7 million drops would be about 20% coverage of the page if all the ink were used for printing  There will also be some ink used for servicing to keep the printhead clear.  The document here has information on how ink is used.
    The diagnostic page is useful in cases where there is a problem in printing and you call HP support.  They may have you print a diagnostic page and may ask for some of the particular lines to help diagnose the issue.  There are a large number of items in the diagnostic page that can be of interest to the support folks (or the engineers during development) but for the most part they are not useful for the end user.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Keep hp 6700 in good shape: automatic print quality diagnostic page every week?

    Hi all,
    I've recently bought the HP Officejet 6700 Premium, and I'm concerned about keeping it in good condition, since I had to replace my previous canon printer because of a stuck printhead (the photo black one, I didn't used it for a long time).
    Since I don't print much (but I'm using the ADF scanner a lot), and other family members prints sporadically, most of the time in black and white, I would like to setup an the printer to automatically print a diagnostic page every week to make sure everything is alright.
    Using eprint, IFTTT and google calendar I could automatically send a file to print (I already set up the printer to wake up a few minutes before the calendar event) with black and color bars (someone suggest to print the google homepage since it has many colors but uses little ink).
    Is there any chance I can directly print the print quality diagnostic page (so I can fully diagnose a problem if it occurs)?
    Thanks for the attention
    Cheers from Italy!
    This question was solved.
    View Solution.

    Hey,
    To clarify for you and answer your new questions on the printers self maintenance.
    The maintenance cycle occurs randomly. It will occur after any power up, after print jobs(not every one) and any time it "think's" printhead health is poor. As mentioned above the printer to does have to be powered on for this to occur.
    You can if you'd like still print off the odd test page just to check, once a month would be adaquet.
    If you want to be saving power and are turning it off, then you would want it to be at least powering on and running the automated service that occurs weekly.
    I hope this clarifies everything for you. Thanks for your posts.
    I worked on behalf of HP.

  • Hp Envy 120 printer - Help! Hp Utility - Setup - can not find printer over wireless

    Hi all,
    I am in desperate need of help - I am running OS X 10.9.1 and have downloaded Mavericks update to support the printer.  However, during the Utility Setup, the printer can not be located by the tool.  I have also tried to manually type in the IP address and that does not work either.
    Prior to 10.9.1 upgrade, everything worked fine.
    please can you help?
    Thanks

    Hi @dBurnet1T,
    Welcome to the HP Support Forums! I see you have recently upgraded to the Mavericks 10.9 Operating system and you are unable to connect your HP Envy 120 to your computer, the Mac does not see your printer.
    I would like you to start here: 'Unable to Find Printer' Error Message Displays on the Computer during a Wireless Network Installati..., once on the page please select the Mac 10.8 section and follow the steps listed.
    Once connected, if you find the Envy 120 is not maintaining the wireless connection, you can complete the steps listed here: Printer Does Not Maintain Wireless Connection
    Please let me know the outcome, I look forward to hearing from you.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Problems when printing help topics from OHJ

    We have encountered some persistent problems when printing help topics from Oracle Help for Java (Ice Browser).
    NOTE: When we print the same source files from Oracle Help for the Web, the printing problems are gone.
    (1) Spacing Errors (all printers had identical results)
    Text with special formatting (<b>, <i>) often has either too much space or not enough space.
    Links often have extra spaces underlined before or after the link, itself.
    (2) When printing multiple help topics from the TOC (an entire branch in the tree):
    On some printers, no graphics print correctly, but instead print as one of the following: 1. empty box the size of one character, 2. black box the size of one character, 3. black box the size of the original graphic. We could not detect a pattern that caused 1, 2, or 3.
    NOTE: all graphics are bit maps (screen captures) that were generated in the same manner.
    NOTE: if these same help topics are printed one at a time form Oracle Help for Java, the graphics print fine.
    Is this a problem with the Ice Browser?
    Thanks for the help,
    Wendy Studinski

    There are a known issue with the ICEBrowser printing in some circumstances. The laying out of text by the ICE Browser relies on font metrics (being able to measure the width of a run of text in a given font). On screen it looks great, but when printing, even though the GraphicsConfiguration for the printer is being used, these widths are sometimes off, which can result in text running together at boundaries between text styles. We're not sure what to do about this problem, and we've reported it to IceSoft.
    Not every font has this problem, so varying the font you are using might help the appearance when printed.
    The other problem you report, problems with the images when printing multiple topics, is something that we will look into.

  • Aplle airport printer help!!   urgent

    hey,
    how do i connect d printer through d aireport express on to my hp laptop which runs windows hav been tryin 2 configure it but havent succeded
    plz i need help in these since there 3 of those laptops wantin d printer:)
    HELP NEEDEd ASAP

    Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
    http://www.ifelix.co.uk/tech/1004.html
    Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
    http://www.ifelix.co.uk/tech/1008.html
    iFelix

  • PhotoSmart 6520 Print Quality Diagnostic no grayscale

    Have a PhotoSmart 6520 printer that has worked well for 6 months.  Used several black cartridges over the 6 months.
    Ran out of black ink again and replaced the cartridge, new cartridge would not work at all.  So put in another, which seemed to work at first, but when printing black in any darkness other than full black there is little to no ink dispensed.  However, it will still print black text. 
    Now after changing printer cartridges twice, when printing the "Print Quality Diagnostic" page, all the text prints out fine, but the grayscale bars do not print at all.
    Any help would be greatly appreciated.
    This question was solved.
    View Solution.

    Are your color cartridges working?  Light grayscale areas are typically printed using the color inks to give better print quality.  (The black ink droplets are much larger than the color, grayscale using color gives better prints.)  Depending on your operating system there may be a setting in the driver for "Print in Grayscale".
    Check the color print quality as shown in the document here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Black only prints on Print Quality Diagnostic report - Photosmart 6525

    I have a Photosmart 6525 printer.  On the 2nd page of a 2 page print, black rapidly faded out.  Cartridge only weeks old and printer ink level check showed it as nearly full.  I ran the Clean Printhead option which printed out a Print Quality Diagnostic when it was done.  All of the informational text printed perfectly but nothing in the black grey-scale box or in the alignment.  Still won't print or copy black.  **bleep**?

    The informational text on the print quality page is printed with color and black inks, so that if one or the other is not working the print will still be visible. 
    I would suggest going through the troubleshooting steps in the document here.  Be sure to check the vents as described in that document. 
    Is your printer still in warranty? You can check with HP's warranty tool here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Bex Broadcasting w/Print Help Service

    I need to set up BEX Broadcast that will process a web template, then run the Print Help Service, and finally send the output (print formatted) to an email distribution list. 
    How can I set up either the web template or the broadcaster so that it will include the call to the print help service in it's command stream when scheduled through the broadcaster?
    Thanks

    Audrey,
    usually, you don't attach "modify_class" to the URL CMD, rather it needs to be attached to the object tag of the "item".
    Once it is attached to the object tag, you just need to attach "help_serivce" class & the "item" to the URL CMD.
    I've included a few lines of sample code here. Hope it helps.
    <object>
    <param name="HELP_SERVICE" value="ZPRINTING"/>
    <param name="MODIFY_CLASS" VALUE = "ZCL_TABLE_ENHANCE">
             ITEM:            TABLE_1
    </object>
    <A href="JavaScript:window.open(SAP_BW_URL_Get() + '&CMD=PROCESS_HELP_WINDOW&help_service=ZPRINTING&item=TABLE_1');" >

  • Log of print out of dunning runs?

    Hi All,
    Can someone please let me know in which table I can find a log of the "print out of dunning runs"?
    I have made a test in T. code F150. I selected a printer and did a dunning run in Belgium for a Danish customer.
    The status is: Select and print is complete.
    In table  MAHNV I see the dunning run, dunning date, selection:2 and printed: F.
    According to a person in Denmark, the dunning forms were not printed on that printer in Denmark.
    What can be the reason why it is not printed?
    Thank you for giving your comments.
    Kind regards,
    Linda

    Hello
    Search in T-Code SLG1. You'd get the list of all logs
    Hope this helps
    Rgds
    Rajendra
    Assign points if useful

  • My hp 6500a does not print with my laptop running Windows 8.1 (size mismatch)

    I am trying to print from a PC running Windows 8.1 to my HP 6500A all in one printer. It will not print anything except 6x4 photos. If trying to print a document on A4 size, I get the message of size mismatch. I tried it on a second PC (again with Windows 8.1) and it still does not print.
    This question was solved.
    View Solution.

    Are these your settings?
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Hp printer Office Jet Pro 8600 wont print from my Mac running Mavericks. Worked fine with PC.

    I am having trouble getting my printer to print with my MAC. It recognizes jobs in the queue, but keeps telling me the printer isn't connected? I have uninstalled and re installed it, updated the drivers. Grrrrr
    Need this for school. Not sure what else to try?

    Hi @zeern2003,
    Welcome to the HP Forums!
    I see that your HP Officejet 8600 will not print from your Mac running Mac OS X Mavericks. I am happy to help you with your printing!
    Please see this printing guide, Print Jobs are Stuck in the Print Queue. As it has information on what to do if your printer is offline, not printing, or not responding.
    Hope this guide helps, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • When I use the HP printer scanner diagnostic shows 2 devices that are no on my network.

    When I use the HP printer scanner diagnostic shows 2 devices that are no on my network.   The program cannot communicate with them (duuh! But they show up every time I run the diag program.  How does the program even find them?  Is there something in my registry?  Thisis NOT at all a killer, just a PITA.   Any suggestions are appreciated.
    Thanks
    John Schroeder 

    Thanks for the response.  I am going to take the "If it ain't broke ..." path   Not worth the effort to track it down. 
    But, if someone from HP wants to pipe in and say where they get the list of printers in the diagnostic, I am all ears - just curious!  And, maybe they will add a feature to delete these spurious "printers" in a future release of the diagnistic.
    Thanks Again!
    John

  • Help needed to run JSTL 1.1 in Tomcat 6.0.16

    Hi All,Help needed to run JSTL 1.1 in Tomcat 6.0.16. I am trying to run the example given in http://tomcat.apache.org/tomcat-6.0-doc/jndi-datasource-examples-howto.html The example tries to connect to MySQL database from JSP using JSTL and JNDI Datasource.I am running the example using Eclipse 3.4.2 using Sysdeo plugin to start and stop Tomcat server from Eclipse IDE.
    My web.xml file has <web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" id="WebApp_ID" version="2.5">
    </web-app>
    and test.jsp has proper taglib directives
    <%@ taglib prefix="sql" uri="http://java.sun.com/jsp/jstl/sql" %>
    <%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
    I have placed the jstl.jar and standard.jarof the jakarta-taglibs-standard-1.1.2.zip under E:\Deepa\workspace\DBTest\WebContent\WEB-INF\lib directory also placedcontext.xml file under E:\Deepa\workspace\DBTest\WebContent\META-INF and the content of context.xml is as below
    <Context path="/DBTest" docBase="DBTest"
    debug="5" reloadable="true" crossContext="true">
    <Resource name="jdbc/TestDB" auth="Container" type="javax.sql.DataSource"
    maxActive="100" maxIdle="30" maxWait="10000"
    username="deepa" password="mysql" driverClassName="com.mysql.jdbc.Driver"
    url="jdbc:mysql://localhost:3306/javatest?autoReconnect=true"/>
    </Context>
    Now while running the example, Eclipse creates one DBTest.xml file under C:\Program Files\Apache Software Foundation\Tomcat 6.0\conf\Catalina\localhost
    which has the following line:
    <Context path="/DBTest" reloadable="true" docBase="E:\Deepa\workspace\DBTest" workDir="E:\Deepa\workspace\DBTest\work" />
    I am getting the following error when running http://localhost/DBTest/WebContent/test.jsp
    in Browser:
    <HTTP Status 500 -
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    org.apache.jasper.JasperException: The absolute uri: http://java.sun.com/jsp/jstl/sql cannot be resolved in either web.xml or the jar files deployed with this application
    org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:51)
    org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:409)
    org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:116)
    org.apache.jasper.compiler.TagLibraryInfoImpl.generateTLDLocation(TagLibraryInfoImpl.java:315)
    org.apache.jasper.compiler.TagLibraryInfoImpl.<init>(TagLibraryInfoImpl.java:148)
    org.apache.jasper.compiler.Parser.parseTaglibDirective(Parser.java:431)
    org.apache.jasper.compiler.Parser.parseDirective(Parser.java:494)
    org.apache.jasper.compiler.Parser.parseElements(Parser.java:1444)
    org.apache.jasper.compiler.Parser.parse(Parser.java:138)
    org.apache.jasper.compiler.ParserController.doParse(ParserController.java:216)
    org.apache.jasper.compiler.ParserController.parse(ParserController.java:103)
    org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:154)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:315)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:295)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:282)
    org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:586)
    org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
    org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
    org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
    In the Tomcat Server console, I am getting the following error:
    INFO: Server startup in 7295 ms
    May 20, 2009 6:36:48 AM org.apache.jasper.compiler.TldLocationsCache processWebDotXml
    WARNING: Internal Error: File /WEB-INF/web.xml not found
    May 20, 2009 6:36:48 AM org.apache.catalina.core.StandardWrapperValve invoke
    SEVERE: Servlet.service() for servlet jsp threw exception
    org.apache.jasper.JasperException: The absolute uri: http://java.sun.com/jsp/jstl/sql cannot be resolved in either web.xml or the jar files deployed with this application
    what is the problem with my code?
    When running the same example, by creating a local server in Eclipse(creating new Server connection pointing to same Tomcat 6.0 installation) it runs fine without any error.

    Hi evnafets,
    Wow, very helpful information, great insight into working of Eclipse. Thanks a lot.
    I have one more question. I have a context.xml file under {color:#0000ff}E:\Deepa\workspace\DBTest\WebContent\META-INF{color} folder and that has the Resource element to connect to MySQL database:
    {code{color:#000000}}{color}<Context path="/DBTest" docBase="DBTest" debug="5" reloadable="true" crossContext="true">
    <Resource name="jdbc/TestDB" auth="Container" type="javax.sql.DataSource" maxActive="100" maxIdle="30" maxWait="10000" username="deepa" password="mysql" driverClassName="com.mysql.jdbc.Driver"
    {color:#0000ff}url="jdbc:mysql://localhost:3306/javatest?autoReconnect=true"/>{color}
    {color:#0000ff}</Context>{color}As usual when running application in local Tomcat server of Eclipse, this data source works fine. But when I run the application on Tomcat, by starting Sysdeo plugin from Eclipse, the DBTest.xml file created in C:\Tomcat 6.0\conf\Catalina\localhost has the context entry as<Context path="/DBTest" reloadable="true" docBase="E:\Deepa\workspace\DBTest\WebContent" workDir="E:\Deepa\workspace\DBTest\work">
    </Context>The<Resource> element I have specified in the context.xml of \WebContent\META-INF folder is not taken into account by Tomcat and it gives the following error:May 21, 2009 5:20:04 AM org.apache.catalina.core.StandardWrapperValve invoke
    SEVERE: Servlet.service() for servlet jsp threw exception
    javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "org.apache.tomcat.dbcp.dbcp.SQLNestedException_: Cannot create JDBC driver of class '' for connect URL 'null'"
    _at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(_QueryTagSupport.java:276_)
    at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(_QueryTagSupport.java:159_)
    at org.apache.jsp.test_jsp._jspx_meth_sql_005fquery_005f0(_test_jsp.java:113_)
    at org.apache.jsp.test_jsp._jspService(_test_jsp.java:66_)
    at org.apache.jasper.runtime.HttpJspBase.service(_HttpJspBase.java:70_)
    at javax.servlet.http.HttpServlet.service(_HttpServlet.java:717_)
    at org.apache.jasper.servlet.JspServletWrapper.service(_JspServletWrapper.java:374_)
    at org.apache.jasper.servlet.JspServlet.serviceJspFile(_JspServlet.java:342_)
    at org.apache.jasper.servlet.JspServlet.service(_JspServlet.java:267_)
    at javax.servlet.http.HttpServlet.service(_HttpServlet.java:717_)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(_ApplicationFilterChain.java:290_)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(_ApplicationFilterChain.java:206_)
    at org.apache.catalina.core.StandardWrapperValve.invoke(_StandardWrapperValve.java:233_)
    at org.apache.catalina.core.StandardContextValve.invoke(_StandardContextValve.java:191_)
    at org.apache.catalina.core.StandardHostValve.invoke(_StandardHostValve.java:128_)
    at org.apache.catalina.valves.ErrorReportValve.invoke(_ErrorReportValve.java:102_)
    at org.apache.catalina.core.StandardEngineValve.invoke(_StandardEngineValve.java:109_)
    at org.apache.catalina.connector.CoyoteAdapter.service(_CoyoteAdapter.java:286_)
    at org.apache.coyote.http11.Http11Processor.process(_Http11Processor.java:845_)
    at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(_Http11Protocol.java:583_)
    at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(_JIoEndpoint.java:447_)
    at java.lang.Thread.run(_Thread.java:619_)
    {code}
    So to overcome this error I had to place the <Resource> element in DBTest.xml under C:\Tomcat 6.0\conf\Catalina\localhost {color:#000000}and then it works fine. {color}{color:#ff0000}*Why is the context.xml file in META-INF not considered by Tomcat server using Sysdeo Plugin?*
    *Thanks,*
    *Deepa*{color}
    {color}
    Edited by: Deepa76 on May 26, 2009 9:32 PM

Maybe you are looking for