Printer HP Color LaserJet Pro MFP M176n

El boton de encendio no funciona. Aprieto en el frontal y en el lateral. Acabo de desembalar la impresora.
He probado a utilizar diferentes cables. Hay corriente en la toma.

Hey @tomzab,
Welcome to the English HP Consumer Forums!
If you prefer to post your question in your preferred language,
Spanish: Foro de usuarios de HP
Alternatively, please feel free to post a revised message in English.
Thank you, and have a great day!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Similar Messages

Color LaserJet Pro MFP M176n installed but not printing

Hello Everyone,
I have problem with my printer Color LaserJet Pro MFP M176n.
at thebegining i try to install it buteverytime i run the installer it give me HP Installer error, so i installed the Microsoft Net Framework 3.5 and run the install and it was working perfict, i install the driver on USB cable and after it show me successfull and print test page and finish, so i click print test page and in printer and fax the printer M176n Show 1 printing job and then 0 but no print came out i try again same, i remove the cable and plug it again the printer is responding perfictly but still not printing i check the scanner and its working fine but only the printing is not, so i try to install it through network and it was sccessfully installed with IP but when i print, still the same 1 printing Job but nothing came out of the printer when it came 0 printing job.
Please help......
- Windows is windows XP 32bit
- Printer name Color LaserJet Pro MFP M176n PCLms
Thanks
I did try to use Scan Doctor, the printer didnt print at the first check but when it ask forenternal print test page it printed then it ask me toif it print of not and i click yes it print in enternal print so it ask me to remove and reinstall so i did 2 to 3 times and still same will not print but when run Scan doctor it will print on enternal print .....
Wael Hilal

Hello @ Averus89,
Welcome to the HP forum. 
I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
I would like to help you with this issue. 
If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
would set a manual DNS. 
I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
The DNS to try is:
Primary: 209.244.0.3
Secondary: 209.244.0.4
Set the DNS then try printing the web services info page again.
Let me know if this helps.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

HP COLOR LASERJET Pro MFP M176n

Hello
Is the printer HP COLOR LASERJET Pro MFP M176n PCL5/PCL6 compliant?
I searched in the HP website and it says PCLm/PCLmS in one link and PCL 3 GUI in another link.
Also advise what is PCLm/PCLmS?
PCL 3 GUI :
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03894363&lc=en&jumpid=reg_r1002_us...
PCLm/PCLmS:
http://www8.hp.com/in/en/products/printers/product-detail.html?oid=5303442#!tab=specs
Please advise which is the correct one.
Thanks
Subbu

No idea which is the correct specification.
But none of those Page Description Languages are compatible with PCL5 or PCL6 (a.k.a PCL XL).
I can't be certain, since (unlike with PCL5 and PCL6) HP does not appear to publish specifications of these PDLs, but as far as I'm aware:
PCL3 GUI is a raster-based language; I believe that the drivers basically generate encapsulated, compressed, PCL-format raster images of each page; the printer unencapsulates and uncompresses these, and then just prints the resultant dots. I suspect that the language does support a very limited set of PCL escape sequences, to select job-level characteristics (such as page size, orientation, plex mode, etc.), but doesn't support anything to do with text formatting.
PCLm and PCLmS also appear to be raster-based, but in this case the raster images are encapsulated within a Portable Document Format (PDF) wrapper.

Color Laserjet pro MFP M176n control panel not working

the control panel in the Color Laserjet pro MFP M176n is not working, is all blank, i can´t see anithhing in it. Is there a reset button or should i take it to the store where i buy it for a checkup?
thank you

Hello @ Averus89,
Welcome to the HP forum. 
I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
I would like to help you with this issue. 
If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
would set a manual DNS. 
I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
The DNS to try is:
Primary: 209.244.0.3
Secondary: 209.244.0.4
Set the DNS then try printing the web services info page again.
Let me know if this helps.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Cannot print to Color Laserjet Pro MFP M177fw

I have a HP Color Laserjet MFP M177fw hard wired to my router. I can print from internet explorer, chrome and other applications such as Office and Notepad, etc. I cannot print from Adobe Acrobat Pro XI. I can get to the print dialogue page and hit print but nothing comes out and I can't see any jobs stuck in the print queue.
I am using an HPtouch computer with Windows 8.1

I have the same problem for my 177fw. It does connect to my desktop via wireless connection when I check the control panel, yet no printing job could be done and they just disappear in the queue list. Sorry to say that, Ms. Helen-Hua, but I don't think "trying to print as image" can help to solve the problem no matter what result it is. For most people I don't think they would accept a printer that cannot print a simple text document.
Look forward to receiving working solution.
PS. The wireless connection has absolutely no problem for my win 7 laptop and my desktop which is formerly win 7. The problem only happen when the computer is upgraded to win 8.1 and another brand-new win 8 desktop.

Scan error 22 on HP Color LaserJet Pro MFP M176n

I'm sorry, but I have a problem, and solution on this web-page didn't help me A 'Scanner Error 22' Message Displays on the Printer Control Panel. Have you got any other solutions of this problem?
Respectfully yours,Alexander.

Hi @boostoman ,
I see that you are experiencing issues with the printer getting a "Scanner 22" error. I would like to help you.
Sorry for the inconvenience caused. Please follow this HP document on A 'Scanner Error 22' Message Displays on the Printer Control Panel. Make sure this printer is plugged into a direct wall, not a surge protector. If you haven't already tried it yet.
Please keep the scanner lid open and then press the copy button.
Check if the scanner bulb glows or moves.
Also to see if the scanner moves freely across the glass.
I will send you another step to try in a private message.
In the forum beside your handle name just click on the envelope to view it.
If you're still receiving the same problem, it may be caused by Hardware, then please contact HP technical support for further assistance. Call 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Contact HP.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Laserjet pro MFP M176n keeps rebooting

Hi,
I have a Color laserjet Pro MFP M176n printer. It ha snot been used for sometime.2 weeks ago when I printed something it had constant paper jam. I open the front door to remove the jam problem was not solved, I removed the ink cartridge to see if there was any piece of paper .Switch the apparatus off and when i switch it on again it just wnt switch on and now it just keep rebooting and wont display anything.
I would liek to know how to solve this problem or if the printer has to be thrown out.
Regards

Hi @widadr,
I see that you are experiencing issues with the printer constantly rebooting. I will certainly do my best to help you.
Temporarily disconnect any cables from the printer, except the power cord, just to make sure there isn't any interference for the next few steps.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
Try and update the printer's firmware by a USB connection if the issue persists. Software and Drivers.
I will send you another step to try in a private message.
In the forum beside your handle name just click on the envelope to view it.
How is the printer connected? (USB/Ethernet)
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you appreciate my efforts, please click the Thumbs up button below.
If there is anything else I can help you with, just let me know. Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Mac cannot detect scanner option on HP Color LaserJet Pro MFP M177fw after trying every method

Hello,
I have recently purchased the new printer HP Color LaserJet Pro MFP M177fw and I am having a lot of trouble trying to scan. I have spend hours trying to fix this.
I have tried all the methods on this website, (trying through preview, printers and scanners (no scanner option showing) image capture, etc. I have also installed all the necessary drivers with no luck (CD and from HP website)
Then I tried all the other methods that were listed, I have tried restarting, deleting drivers and proceeding through image capture, preview and sanner and printers, it just does not have scan option anywhere.
The printer is working fine though, and I am connected to the printer through wifi
I do not know what else to try, please help.
Kinds regards
Zhanna

Hi @student ,
I see by your post that you aren't able to scan through the wireless network. I would really like to be able to help you resolve this issue.
When you added the printer, did you add it as a Bonjour printer or did you have to type in the IP address and add it through IP Protocal? The reason I am asking is because when adding the printer through IP Protocal you can only print, your not able to scan with the printer added this way.
Check the driver name that is installed for the printer. It should list just the printer's name. (HP Color LaserJet Pro MFP M177fw )
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen should show the name.
If the printer name isn't listed properly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver. (you might have to click the drop down to select the printer's name to add it in)
If you are still having issues, uninstall the printer software.
Uninstalling the Printer Software.
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer.
Empty the trash.
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Then install the printer software again. HP Color LaserJet Pro MFP M176/M177 Series Software.
If the issue persists, connect the printer directly to the Mac and try and scan through a USB connection. Just to rule out a network issue.
Please let me know the outcome.
Have a fantastic day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Color LaserJet Pro MFP M177fw Not working with Fedora 14

Our ERP is compactible up to Fedora 14. But I newly purchased Printer(
HP Color LaserJet Pro MFP M177fw) is not working with this OS.
Give me a urgent solution

Hi @HealthITLadyRed,
I read your post and see that the printer is making noise and is stuck initializing. I would really like to be able to help you resolve this issue.
I have provided some steps to try to see if we can resolve this issue.
Check and remove any packaging material inside the printer and toner.
Disconnect the USB/Network/FAX and power the printer on Standalone.
Do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
Update the printer's firmware by a USB connection. Software and Drivers.
Select Option 2 and wait for the page to load and then select the link for firmware. This resolved the previous posters issue.
I can send a private message with another step to try.
In the forum beside your handle name just click on the envelope to view it.
How is the printer connected? (USB/Ethernet/Wireless)
What happened prior to this issue? (paper jam, changed toner) Any feedback would be appreciated.
Is this a new printer?
If you appreciate my efforts, please click the Thumbs up button below.
If there is anything else I can help you with, just let me know. Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

My iPhone 6 iOS 8.2 does not print on HP Color LaserJet Pro MFP M476nw. It displays "No AirPrint Printers Found'.

My iPhone 6 iOS 8.2 does not print on HP Color LaserJet Pro MFP M476nw.
It displays "No AirPrint Printers Found."
Same thing for iPhone 5S iOS 8.2.
Both iPhone and printer on the same wifi network.
I tried printing from different applications. AirPrint does not work.
I tried turning off and back on, reset, printing from different applications, ...
iPhone 6 prints through HP Wireless Direct printing.
Sony laptop works via wifi.

Hi mtotonji,
Thank you for using the Apple Support Community. Given the nature of the issues you are describing and your current configuration, you may be better served by reaching out to one of Apple's other available resources for more direct assistance - https://getsupport.apple.com/GetproductgroupList.action
Sincerely,
- Brenden

HP Color LaserJet Pro MFP M177fw Printer always cool-down mode

Hi there, i am also meeting with the same issues like the cooldown mode printing.

Hi , I found something written by that you may find helpful regarding the printer going into cool down mode: I have provided a document with Resolving Control Panel Messages. Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation. Update the printer's firmware. HP Color LaserJet Pro MFP M177fw Drivers. Where is the printer located? (enclosed shelf, desk)How many pages are you printing when you get this message?What is the paper's weight and what kind of paper are you using? If the issue persists, please post back with the answer to the above questions. Thanks.

HP Color Laserjet Pro MFP M177fw going cool down mood after printing every pages.

I have bought Color Laserjet Pro MFP M177fw before only 3days. From the very begining It says printing.... cooldown mood, and take a long paus. This issue occures after printing each page. I am using HP Toners. And my directly connected with wall socket(Electric). Please help me. It is urgent for me. Thanks in advance.

Afternoon , I found some information about the cool-down mode on your Laserjet Pro MFP M177fw. The product is too hot to continue printing at normal speed.
The product will pause longer between printed pages until it cools down.
Overheating occurs when the product lacks air ventilation or when it prints continuously for a long period of time. To prevent overheating, place the product in a well-ventilated area, and divide very large print jobs into smaller print jobs.Other than using it in a well ventilated room, you could see if there are any firmware updates available. You can click on this link to Getting Printer Updates for HP LaserJet Pro. If the issue continues, I would Contact HP Support for further assistance. Fill in the model number and the form to receive a case number. You can view all other ways of contacting HP from their list of Support Options. Thanks,

HP Color LaserJet Pro MFP M177fw - PostScript support?

Hi,
I'm looking to purchase a new printer/scanner/copier(/fax is a nice to have, but not mandatory), and I'm deciding between the following models:
HP LaserJet Pro 100 color MFP M175nw
HP Color LaserJet Pro MFP M177fw
PostScript support is important for me, and I know that the 175 has this. However, I'm not sure about the 177, even after digging through several web pages and documents. Here's what I found:
- The main specs page for the 177 says that it supports "PCLm". I'm not familiar with this PCL variant, so I don't know how it compares to PCL5 or PCL6, etc. I was unable to find more information on "PCLm".
- The "Software Included" section of Page 2 of the PDF datasheet for the 177 mentions "HP PostScript" driver. This is the only place where I've seen any potential indication that the 177 supports PostScript. This section also mentions a "PCLmS" driver. I could not find any further information on "PCLmS".
- The for User Guide the 177 only mentions PostScript in a section that refers to ePrint. However, it does not imply that the 177 itself supports PostScript.
- The Product Specifications page (in the Support section of the HP site) for the 177 has a "Printing Specifications" section which lists only "PCL3 GUI" next to "Device languages".
I'm guessing that the 177 does not support PostScript, but does anyone have any more definitive information? Also, is there a description of PCLm / PCLmS somewhere?
Thanks!
This question was solved.
View Solution.

Hi Clent
Here is some information on both printers.
Here is a url for the printer specifications for the Color LaserJet Pro MFP M177fw
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03901180&tmp_task=prodinfoCategory&cc=us&dlc=en...
Data Sheet also.
http://www.shopping.hp.com/shopping/pdf/cz165a.pdf
Fonts and typefaces Depend on Operating System fonts and typefaces.
Print languages
PCLm
Laserjet Pro 100 color MFP M175nw
http://www.shopping.hp.com/shopping/pdf/ce866a.pdf
Print languages
HP PCL 6, HP PCL 5c, HP postscript level 3 emulation, PDF (v1.7), HP PCL 6, HP PCL 5c, HP postscript level 3 emulation, PDF (v1.7), AirPrint™ compatible
Hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Color LaserJet Pro MFP M177fw fax to pc

I have just bought this printer and want to msend faxes to my pc. I was told by PC world that it had this function. So far I cant find it can anyone help. Many thanks

Hi ,  I would be happy to help shed some light on the issue your are having with trying to setup this Color LaserJet Pro MFP M177fw to receive your faxes on your PC.  I have looked into this further for you, and I'm pretty sure this model doesn't support receiving faxes on your PC. You can double check to make sure I haven't missed it in the COLOR LASERJET PRO MFP M177 User Guide.
I did however locate a different model, where in the manual does provide instructions on how to set this feature up but it is a black only printer. Its the LaserJet Pro MFP M225dw (again black only, no colour.)
Step 5 (Optional): Configure settings for receiving digital faxes (Windows) The product can save incoming digital faxes to a computer folder. Use the HP Digital Fax Setup Wizard to configure the settings. This feature is available only for Windows. 1. Click Start, and then click Programs. 2. Click HP, click the name of the product, and then click Digital Fax Setup Wizard. 3. Follow the on-screen instructions to configure the settings.  HP also has this feature available on it's HP Officejet Pro 8610/8620/8630 e-All-in-One Printers, which are Colour Inkjets. Some of the commerical products also support this feature but I'm unsure of which ones. I would really suggest contacting HP Shopping for more information on these models.  Hopefully this has answered your questions, and please let me know if there is anything else I can do to help.   Thanks,

Hp color laserjet pro mfp m177fw (Cant open SCANNER on computer)

Hi there,
I am using a desktop 27 inch Mac with OS X Yosemite 10.10.1
When I go to system preferences and click on printers/scanners I can see my mfp m177fw laserjet printer (wirelessly connected fine). But unlike on my Macbook Pro laptop on my desktop there is no SCANNER option to open up? Thus I am unable to scan from the printer to this desktop. I have the latest HP driver installed on the desktop computer for my m177fw printer.
Any ideas? Any help would be greatly appreciated
thanks!
Simon

Hello @Simonjayh,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the scan issue that you're experiencing since installing your HP Color LaserJet Pro MFP M177fw on your Mac OS X 10.10 computer. Can I please have you run through the steps below to get this product functioning properly again for you.
Step 1: Uninstall Drivers:
First, can I please have you click here and run through the steps provided to Reset the Print System on your Mac OS X 10.10 computer. Please refer to the section under 'Resetting the printing system in OS X Lion' as the steps are the same for your Mac OS X 10.10 Operating System. Resetting the Print System will remove every printer from your Print & Scan window on your computer. However, this does not uninstall the devices. Therefore, should you use other printers on your Mac OS X 10.10 computer simply ensure that they are plugged in with a USB Cable or Network connected and add (+) them back in. Do not add your HP Laserjet printer back in at this time.
Next, please click here to access the steps on how to properly uninstall the Software and Driver Package for your printer. Once the website opens select the dropdown for 'Mac OS X v10.6, OS X v10.7, OS X v10.8, and OS X v10.9' as the steps are the same for your Mac OS X 10.10 Operating System. Once the uninstall has completed successfully, please proceed to the next step.
Step 2: Verify and Repair your Disk Permissions on the Mac:
Open Macintosh HD and go to Applications
Go to the Utilities Folder
Open the Disk Utility
Select the Hard Drive volume you are using (usually on the left)
Select Verify Disk Permissions
Once that process is done, select Repair Disk Permissions
Step 3: Check for Apple Updates:
Go to Apple
Select System Preferences
Select Software Update
Click Update Now
Install your available updates
Restart your computer
Step 4: Reinstall your Software and Drivers:
Lastly, please click here to download the appropriate Mac OS X 10.10 Full Feature Software and Driver package for you printer. Once the website opens select the Download button on the top left. Once the Download is complete please follow the onscreen steps to reinstall you printer.
Once your printer has been successfully reinstalled, please test the HP Scan functions again. For additional scan information, you may want to refer to : Scanning with the Full Feature HP Software in OS X v10.10 Yosemite
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Printer HP Color LaserJet Pro MFP M176n

Similar Messages

Maybe you are looking for