Printer in re-build network not working on second mac (Lion)

I can not access the usb Printer (Epson photo P50) from my Mini (10.7.4) on my just rebuild Airport-Express home network.
Because of a bad, constant on/off WIFI connection I resetted the AE by pressing the little reset button for 20 seconds. After that I reconfigured the AE, the network and printer configurations. I did this on our MBP (10.6.8) because the configuration assistent on the Mini said it didn't support this older Airport model. Both computers (and Iphone) have access to the network and internet again, so that part works fine.
On the Mini in System Pref. I can see the printer (shown as EpsonP50@MBP) and choose it as preferred printer. But when I try to choose it in the 'printing dialog box' (visible after command-P) it says not connected, or shows '!' or '~'.  The first time I tried there was a message shown saying something like "retrieving the printer  . . . . ?!" I got the impression that it was trying to get something from the MBP?. This seemed to fail.
Whats strange is that before the re-configuration the Mini had no problem contacting the same printe. Seems I'm missing something . .
Any thoughts . . .

Asked for help to quickly: solved the problem myself . . .
I forgot to choose: 'share the printer' in the 'Printing and Scanning' menu in 'System Preferences' on the Macbook Pro.

Similar Messages

  • I have just bought a new TATA PHOTON MAX, but, this is NOT working on my MAC LION 10.7.4.

    I have just bought a new TATA PHOTON MAX, but, this is NOT working on my MAC LION 10.7.4.
    I was using a Reliance Netconnect+ and that was working on the same machine. Kindly suggest if there is a way that the TATA PHOTON MAX can work on this.
    Thanks!!!

    Contact the maker of that product.

  • Build is not working in SAP NWDS version 7.0.09

    Suddenly the build is not working for my SAP NWDS version 7.0.09. It used to work fine before.
    When you create a DC and do a Development Component --> build . nothing is happening. In the
    General user output view, nothing is printed also.. I think the built is not actually happening now. So I tried uninstalling the NWDS and installing again. I also tried changing the default workspace. But still the problem do exist. what can be the possible reasons for this ? Please help.. Your valuable answers will be highly appreciated.

    Hi Garcia,
    I have checked with the Network team who manages Exchange server and they have mentioned that it is bouncing back from our CRM host with the error as below,
    said: 553 5.1.8 <[email protected]>... Domain of sender address
        [email protected] does not exist (in reply to MAIL FROM command)
    Regards,
    Arpit

  • My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

    My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

    You will need to install the printer on your Mac
    Open System Preferences (gear icon) on the dock
    Open Print & Fax
    Click the + (plus) button at the bottom of the printer list
    Wait for your printer to appear in the next box, then click it to highlight it
    Click Add at the lower right
    Be sure to select the correct printer when you try to print as you will see your printer listed twice. Good idea to make the printer now installed on your Mac the default printer so you do not have to choose which printer to use each time you want to print.
    You can also go into Print & Fax, select the printer associated with the Time Capsule and click the - (minus) button if you want to delete that location.

  • I am new to xCode and SDK Disks. My Interface Builder will not work and 'quit's unexpecteldy'. What can I do? I really want to create an applicaiton. Thanks

    Hi, I am a new user to xCode and just recently downloaded a SDK Disk image and also an older version of xCode from the Apple Developer site. I opened the 'Interface Builder' for the first time and it worked. Next, when I tried to open it again (with and without the xCode 'Mainmenu.xib' attachment file from xCode) it kept showing the message "it quit unexpectedly".
    I need to create an application for a project I am working on. If anyone who can resolve my problem of why the Interface Builder is not working, that will be great.
    If you need additional details (like which versions etc.) please ask, for I am desperate to find an adequate solution to this problem.
    Thanks.

    If you need additional details (like which versions etc.) please ask, for I am desperate to find an adequate solution to this problem.
    Without intending any disrespect, if you had suspected these would be questions and if you're in a hurry for an answer, then why did you exclude the information?  And yes, knowing the Mac OS X version (preferably Mac OS X 10.5.8 or 10.6.7) , as well as the Xcode version might shed some light on this.  Might.  And I'll presume there's a specific reason you downloaded what I will assume is an Xcode3 version.
    Was this an existing Xcode project, or did you start with a new project here?  If it's an existing project, it could well have a corruption or an incompatibility.
    Initially, I'd probably start with a new project, and load in newly-copied source files.  On the off chance the project is corrupted.
    Failing that, I'd deinstall Xcode using the documented procedures, and would then reload it.  If there was an old version of Xcode around on the system, sometimes wonky stuff can happen with an installation.
    And FWIW, the Apple Developer Forums and the Apple mailing lists tend to see far more developer-related traffic than do these particular forums.  (There's an Xcode users' mailing list around which sees regular traffic, too.)

  • Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick

    After upgrading to Maverick OSX on the iMac printing from CS5 via Epson R3880 is not working correctly. In Print Settings menu the drop downs for Colour and Colour Settings are greyed out. I already re-installed PS and installed the new drivers from epson. Any ideas?

    but after choosing PS manages color, the options in the print menu for choosing color (color or b&W) and color settings are not available anymore. They used to be the last three years I printed with photoshop/epson 3880.
    Instead they are greyed out now.
    attached screenshot:
    Op 30 mei 2014, om 01:47 heeft Chris Cox <[email protected]> het volgende geschreven:
    Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
    created by Chris Cox in Photoshop General Discussion - View the full discussion
    If Photoshop managed color, then the controls in the printer driver are supposed to be grayed out - that's how Apple specifies drivers to work (because only one party should be managing the print color).
    So what you're describing is perfectly normal.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6420209#6420209
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Print icon on toolbar does not work

    Recently bought new computer running W7
    Use acrobat to print postage labels on royal mail site
    Have latest version of acrobat and when screen comes up showing label to be printed the 'floating' toobar appears but clicking on print icon has no effect
    I am forced to used 'CTRL P' and then 'enter'
    Occasionaly CTRL P gives me another toolbar at the top of the window which also has a print icon, this does nothing either
    Can anyone suggest what is going wrong, should I go back to an earlier acrobat that worked fine on my old XP PC ?
    Thanks
    Graham

    Thank you
    Yes you are correct using a PDF in browser to print post labels.
    Running Windows 7, Internet explorer 9, Acrobat Reader Version 10.0
    CTRL P brings up dialog box OK and I can print from there.
    Cannot comment if problem happens outside of browser as it is home
    computer and do not have need to view PDF's offline but will find thsi
    out if important.
    Graham
    >--Original Message--
    >From: [email protected]
    >Date: 23/02/2012 13:18
    >To: "flat-pack"<[email protected]>
    >Subj: Print icon on toolbar does not work
    >HitenderPrakash [http://forums.adobe.com/people/HitenderPrakash
    created the discussion
    >"Re: Print icon on toolbar does not work"
    >To view the discussion, visit: http://forums.adobe.com/message/4224450#4224450

  • Shape Builder tool not working on shapes in a clipping mask

    Hello again,
    Why is the Shape Builder Tool don't work on shapes inside a Clipping Mask? The Pathfinder does work but for the Shape Builder Tool: NADA!
    Thank's for answering,
    Lindberg

    Hi,
    Thank you for answering. No it will work correctly. The Pathfinder work inside a clipping path and in any situation but not the Shape Builder Tool. Unless this is normal, I think that the specialist at Adobe should have a look at this annoying behavior and try to release an upgrade with this behavior corrected in a near futur.
    Thank’s again for answering,
    Robert Marchand
    [email protected] <mailto:[email protected]>
    Le 8 avr. 2015 à 10:41AM, Larry G. Schneider <[email protected]> a écrit :
    Shape Builder tool not working on shapes in a clipping mask
    created by Larry G. Schneider <https://forums.adobe.com/people/LarryG.Schneider> in Illustrator - View the full discussion <https://forums.adobe.com/message/7418340#7418340>
    If you release the Clipping Mask and try the Shape Builder tool then, does it still balk at making the shape?
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7418340#7418340 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7418340#7418340
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

  • MacBook Air wifi internet shared network not working on tethered android phone GT B5122

    MacBook Air wifi internet shared network not working on tethered android phone GT B5122
    I have created a password protected wifi internet network on my Macbook air. I tethered by Andriod phone onto this network, but the internet connection works intermittently on the phone, and when it stops working the network continues to show as connected to the shared network mostly(other times it keeps renewing the wifi IP address on the Andriod phone).
    Also the network the MBA is connected to, is a hardwired one using a SSH login account in a student accomadations.
    I am not sure, but all the restarting and refreshing of system, phone and wifi sharing and re-enabling wifi is not reparing the internet connecting on the wifi network for the phone
    Really puzzled, if this is one of the Apple, Andriod compatability issues.
    Cheers,
    Vivek

    Spanners91 wrote:
    Hi.
    I'm having trouble with the wireless connection on my new home hub 3. Most devices will connect easily, but there are three devices that have trouble connecting. These are an Android Phone (Samsung Galaxy Mini), an android tablet (Sony Tablet S) and an iPod. All of these devices work perfectly on other network connections, and other devices in the house are quite happy connecting to the network.
    The Androids can see the network, and will try to connect to it, but when they do they just go through a loop of "connecting">>"acquiring IP address">>"disconnected". I have tried resetting the Home Hub with a pin, and that lets the devices connect for about 24 hours, but after that time they stop connecting again.
    I'm really not sure what to do to fix the problem, so I will very much appreciate some help.
    Many Thanks.
    My lads SGMini connects perfectly to our hub3
    Have you installed the BTFon app to these devices?
    If so, you could delete it and then see what hapens.....
    -+-No longer a forum member-+-

  • Mouse.hide() not working on air/mac app

    Hi,
    I have an air app with a Mouse.hide() that is not working on the mac, but in an odd way. It has the latest AIR runtime as of the other day and I am publishing to AIR 2.0 from Flash Pro CS5. I'm making it from windows where it works fine, but the show computer is a mac mini.
    I am calling Mouse.hide on the Document class in the ADDED_TO_STAGE handler (right before going FULL_SCREEN_INTERACTIVE), as well as 2 seconds after ADDED_TO_STAGE via a timer.
    Here's the thing. If you launch the air app from the dock in osx, it works every time. However, if you launch the app from a finder window, the Mouse.hide() does not work! It also doesn't work when the app is set to run at login, as this is a trade show display setup just to run this app. It is also worth noting that in this case, the app still does have keyboard focus as the keyboard events are registering properly. Hit "M" and I've got the mouse hiding that way with no problem. Trouble is the client wants it to be automatic, so that show staff can hit the power button on the computer and be done.
    I would post my code, but seriously it's just on ADDED_TO_STAGE -> Mouse.hide() and it hasn't changed. Shouldn't that work? This has been working since the beginning of this project almost 10 months ago but just stopped working recently (within the last couple of times we have updated software on the show machines).
    I need to come up with a solution to this, but as far as I can see the only solution is to upgrade the project to run at 10.2 and air 2.7 to use native mouse cursors and load a blank cursor. To do that I think I would need to convert my .xfl project over to a flex builder project with components but I'm still not quite sure how to do that, so it would definitely take some time :/
    thanks for reading this and if you think it would help for me to show my code I'll put together a test bed.
    Nick

    Hi Chris,
    Thank you for posting. Here's what I filed 6-27-13, but I did not receive a tracking # from Adobe:
    Feature Request/Bug Report : Bug Report
    Product                    : Flash Authoring
    Product Version            : FlshProCS6
    Product Language           : English
    Browser                    : Safari
    Web Server                 : Apache
    Application Server         : Other : none
    Database                   : MySQL
    Operating System           : Mac OS X Intel based
    OS version                 : 10.7.4
    OS language                : English
    Device Profile             :
    Device Model               :
    Mobile Device              :
    HTTPREFERRER               : https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&promoid=EWQQL
    Feedback Report            : ******BUG******
    Concise problem statement:
    When using Flash Pro CS6 to build a standalone Mac .app player, this code from CS5/AS3 no longer hides the mouse cursor. SWF and .exe files are not affected.
    If you use Mouse.hide OR the FULL_SCREEN command, they work fine. Just not concurrently, like in CS5.
    Steps to reproduce bug:
    1. Use the following AS3 code together:
    stage.displayState=StageDisplayState.FULL_SCREEN;
    Mouse.hide();
    2. Publish .fla as .app
    Results:
    App is full screen but mouse cursor is showing.
    Expected results: Mouse should be hidden.

  • Adobe bridge cc is not working on my mac snow leopard version 10.6.8. In other words the program will not open all other programs work fine

    Adobe bridge cc is not working on my mac snow leopard version 10.6.8. In other words the program will not open, but all other programs i have been able to open just fine

    Moving this discussion to the Bridge General Discussion forum.

  • Why does sound not work on my Mac Air?

    Why does sound not work on my Mac Air --all setting seem okay. OSX 10.9.2 operating systyem.

    Open System Preferences > Sound > Output
    Make sure the coorect output devices is selected and the Mute button is not checked.

  • Home sharing does not work with new mountain lion update.

    home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

    Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
    If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
    My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

  • HT204187 Email account does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

    I have seral email accounts on my Mac. One does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

    You don't input the information in manually for iCloud mail. It is automatically set up for you when you sign into iCloud via System Preferences and choose the Mail checkbox. Sign out of iCloud or deselect Mail in iCloud preferences. Open Mail's preferences and choose accounts tab. If iCloud account still exists in the list, delete it. Sign back into iCloud or check the box for mail. The account will be auto created for you.

  • I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank.  I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

    I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank.  I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite.  Please help!

    Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

Maybe you are looking for