Printer initialization for Pay slip

Dear All,
For our project, we need to create new page format for Pay slip report.
Widht: 8 in
Hieght: 6 in
We don't know about command that we have to defind for this format in Printer initialization.
We know that if report format is A4, we can define command \ep44; in Printer initialization.
For report size 8x6 in., we didn't know commnad for it.
Would you please advise ?
Thank you very much,
Anek.

Hi Anek,
Please co-ordinate with your abaper he will inform you.
Regards,
Anil

Similar Messages

Printing remuneration statement (Pay slips) in the portal

Good Morning.
I have the following request.
I want that the employee can display the remuneration statement (Pay slips) or (receipt of payroll) in the portal.
There is a service standard in the ESS for do this customizing.
What are the steps to do this?.
Kind Regards,
Sanew2

Hi,
The salary statement is either a Pe51 form or the HRFORM. Whichever it is, it needs to be added to the 'HRFOR' feature e.i, the form name needs to be added and the feature needs to be activated. Then the same will be displayed in the portal.
Secondly, there is another BADI, 'XSS_REM_INTERFACE' which needs to be implemented.
Then from here you can configure the settings for printing the salary statement from the portal ( the method DEFINE_PRINTBUTTON_STATUS in the BADI mentioned above needs to be activated, the button needs to be enabled) and then the MASS printing configured.
Regards,
Pinki

Print username on pay slip in hr forms

hi gurus,
anybody let me know,how i print username on payslip and where maintain the username data.
Thanks
Waqas

Hi,
What is the meanig to User you are talking about? Is it HR admin, Py Admin, TM admin.
If yes, maintain these in infotype 0001 and you call the same in Payslip using single fields (Table P7, field SACHA / SACHP /S ACHZ)
With Regards
Shyam V

Print check for Noted Items......

Hi ,
I created noted items in F-57 for posting of Post Dated Check to Vendor.
How can i print for Noted items.
In FBZ5 , we can print checks for Paying Document number.
any one suggest answer.
Regards
Kiran Konujula

Purna,
This is not possible in standard SAP. SAP has provided only two options for this. The one which you explained and the other in which you define the percentage of usage probability.
Sumeet

Pay slip spool creation problem

Hi All,
Is there an option in SPRO to specify NO SPOOL creation for salary statements?
We are on ECC 6.0, BP 1.2, ESS 603.
If not is there any other option to not create any spool for pay slips?
Thanks
Vinay

May be you can give a try.....
Under spro node, perform Provide Salary statment as PDF in Internet --->> Edit Feature EDPDF.
Here, in decision tree, use the return value -
$CEDT$.

Print pay-slip on double-sided

Hello,
We would like to print pay-slip on both side mode (we use ABAP list with report RPCEDTF0).
The print is Ok but the problem is that, on the same page, there are pay data for an employee on the side and pay data for an other employee on the other side.
My question is : how to do to add a jump (new page) after each employee ?
Is it a standard option and how to implement it (ABAP, form) ?
Examples could be help me.
Thanks in advance for your answer.
Daniel.

dear ,
check ur printer settings , bcos u are using std.program , so i cannt say SAP is doing wrong , better to check ur printer settings
Regards
prabhu

Printing Employee Pay Slip using HRFORMS

Hello Experts,
I am working on a smartform for printing employee pay slips/remuneration statments using HRFORMS config.
I am trying to print the payslip checks using this and in the smartform, I have a problem with printing the check footer data using MICR font.
I read the Note 94233 - Support of MICR font. I have both MICR_C 10.0 Point Bold=Off, Italic=Off
MICR_E 10.0 Point Bold=Off, Italic=Off configured, and it does not work. I also have the required setting for the output device in SPAD.
While I try to print C &bank number&C A&bank_account_number&A, it literally prints C and A instead of the special MICR characters for C and A.
Anybody came across any such problem before and found any solution to this?
I appreciate if you can reply with your solution, will realy appreciate it.
PS: I am using Smartforms for printing the forms here.
Thanks in advance.
Shivani.
Edited by: Rob Burbank on Sep 22, 2009 4:03 PM

Hi,
The problem is resolved .
Regards,
Tanuja

Designation on Pay slip

Hi Friends,
Please guide me "How can I show the employee designation on Pay slip"?
Where as of now currently it displays only emp group & emp sub group on Pay slip but not designation.
Job I taken as an M9 & Position: Officer
Emp group: Regular & Emp Sub group : M9
How can I proceed?
Thanks a lot for your timing,
Points can be given to the correct solution.
Kind Regards,
Saisree.S

Hi SAISREE,
For this u need to modify the remuneration form, copy the standrad form and make your own, Now suppose u don't need the employee group then remove it. In place of it add text module Position and in place where position no is printed, include PLANS (position ) field and in conversion choose 01 (Replace key with text) .
Path for the same is PE51-> enter the form name -> go to singfle fields(change mode) -> remove the text for emp grp and add text for position -> Now dbl click on the emp. grp printed , change the table to "P0001" and table field to "PLANS" conversion field as 01 and also adjust the output lngth.
This will solve your problem.
Regards,
Tomesh

Mid month period not being calculated in pay slip

Hi Experts,
Mid month period given in 0008 is not being calculated.
e.g. if i hire some one on 16.01.09, then 0008 data should be calculated for those days only (e.g. 16 days) in pay slip. But in my case it is taking full amount of 0008.
Can any one kindly help, pl.
thanks
Balu

Dear Sikindar,
thanks for the replay.
PCL 1 and PCL10 are having 3 and 1 respectively.
checked the control record and the pay roll area of that employee and generation of pay roll periods are available in V_T549Q.
please guide me further
thanks
Balu

Print program for large ALV Report

I have an ALV report that has around 20 columns of data which I would approximate that it will take 3 pages to display the data.
When I use the print button for this report, the layout is changed to the max possible columns 65x255 and yet many columns go missing in the hard copy.
It seems I need to write some separate logic to print this document. How can I handle this?
I am using CL_SALV_TABLE t o generate the report. I am already handling events ON_USER_COMMAND & TOP_OF_PAGE.
Thank you.

Hi,
Because the standard format of ALV output setting is X_65_255, when you want to extend the column number, you have to choose other format type follow the steps below:
   1.ALV screen, press 'print.' button->properties->
   2.double click 'format X_65_255'->
   3.In format field you can choose your setting with search help.
In R/3 system, we have several format as default, we can also define our own format by t-code: spad.
   1.Spad->
   2.Full administration->
   3.Devices types->
   4.Click 'Display' of Format types->
   5.Now, you can find X_65_255 format type here, click modify button and create a new one.
   6.Input format type, 'L' format type for ABAP lists, fill Attribuetes... ...
   7.Spad->Full administration->Device types->Device Types-> choose the device type you alredy use and double click it
   8.Click 'formats' button in application bar
   9.Click 'Create' button in application bar.
10.Add the format you just created.
11.After above steps you added the format to your device type, double click the format you added.
12.In the tab page of Formats we have to fill the following Actions:
                   a.Printer initialization
                   b.End of page
                   c.End of line.
       You can copy the code of each action from other formats, they are exactly the same!
    You can find your own defined page format in the ALV print properity, now!
Best regards!

HOWTO: Control Printer Attributes for a Report at Run Time Reports 6i

HOWTO: Control Printer Attributes for a Report at Run Time
Like page width , height etc
my problem is i had installed a printer and it is set for
printing different reports ( like invoice slips , legal size ,
A3 etc ) each time i have to manually set the page settup from
printer folder .instead if there is an option to set the printer
attributes from Reports 6i it is great
rajesh

All the Printer Setup(Page Height and Page Width) must be set in
the Reprot Program. These can be set at the Layout-Main Section
in the Object Navigator.
hth

POSTING_ILLEGAL_STATEMENT in MIGO for collective slip

Hi all.
I am using smartforms for printing GI slips in MIGO. The problem is that when i want to print the document for collective slip i get a short dump with error: POSTING_ILLEGAL_STATEMENT. I have looked over the internet for a solution but i could not find one.
Any ideas ?
Regards,
Cristian.

Hi,
For correct and quick response, Try posting your question in this forum -
SAP Community Network Forums » SAP Solutions » ERP SD Sales
Thanks,
Shambhu.

Print programs for Goods Receipt, GI, ST, Subcont. TP, Consignment TP ...

Hello Gurus,
There is a Business requirement to have a separate print forms for every Inventory transactions like Goods Receipt, Goods Issue, Stock Transfer, Sub-Contracting Transfer Posting, Consignment Transfer Posting, etc.
We need to use the Transaction MB90 to print all the Inventory documents.
While checking the Output types, we find that basically WE03 is for Goods Receipt (Collective Slips) & WA03 is for Goods Issue / Transfer postings (Collective Slip)
I would like to know that inorder to assign a different Smart Form & Program (One for each of the transactions listed above) to the output types, is there a way around to work with these 2 Output types & have the 5 different Smart Forms - Programs assigned to these 2 Output types or do I need to create a copy of these output types & use them instead, one output type for each Smart form - Print program combination
Regards,
Zafar.

First, you can maintain PRINT ID in the IMG for each movement type 
Second, you can create multiple OUTPUT TYPE - one for each.
Third, in MN21, create ouotput records using a combination of OUTPUT TYPE and PRINT ID
 
Example:
GR movement types 101, 105, etc, you can have PRINT ID 1 and OUTPUT TYPE Z001
GI movmeent types 201,261, etc. you can have PRINT ID 2 and OUTPUT TYPE Z002
 
Configure PRINT ID: IMG path: Materials Management > Inventory Management and Physical Inventory > Print Control 
Configure OUTPUT TYPE: IMG path: Materials Management > Inventory Management and Physical Inventory > Output Determination

Print out for GR/GI

Halo
I have set the printer names in SPRO-Inventory- Print control, also maintained print indicators for GR & GI. But when i m trying to create a Spool in MB90 it is not picking up any document. It says No messages for initial process. What could be the reason? I have created conditions using MN21 txn code by entering the details for WA/WE series, still i am not getting the required output. I am able to do it by MB02 and assigning printer to each and every document, which one can not do each and every time when a GR/Gi is done. Where do I miss?
Samuel

For getting print of any material document u have to do the following
1) Assign print indicator in Print control ---> General settings --->print version 1-for individual slip and 3-for collective slip
2) Assign this print indicators to the movement type in "Maintain Print Indicator for Goods Receipt Documents"
3) Maintain condition record for output type with MN21 transaction for the combination of transaction/eventtype, print version and print indicator.
4) Then select print version (1 or 3) while posting goods receipt. if u have already generated the document, u can do the same in MB02 transaction. Here u will get a message that output is saved.
Then u can go to MB90 and check for your spool
hope this resolves ur problem
award points if found useful

Print out for Goods Issue 531

Hi
We need to take the print out of 531 mvt
What are the standerd Setting needs to maintain for the same,
Regards
Niti Narayan

hi
Check following if useful to u
1. Maintain the Printer Name in SPRO->Malt Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WA01, WA02 and WA03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. Go to MN21, forWA01/02/03 and Tr Type WA, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
regards
KI

Printer initialization for Pay slip

Similar Messages

Maybe you are looking for