Printer installation under Windows 8 Consumer Preview

Printer : HP Photosmart Premium C309g
OS : Windows 8 Consumer Preview
Several times trying to install the printer with last downloaded HP specific software.
Can't install my printer.
Is there a solution ?
It works fine with windows 7
Salutations
Nohcuaf

dft8,
Windows 8 has a Windows update driver for your printer(see attached) so if you have Windows 8 setup to update and the pc is connected to the internet it will install the driver, How are you trying to install it? is it usb or network?
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**
Attachments:
Devices.jpg ‏278 KB

Similar Messages

IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit

Dear all,
we are just trying to install IDES 4.7:
IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit
But the installation break with error Message:
Error 5 (Access is denied.) in excution of a "NetServerGetInfo" function, line (233), with parameter (saptranshost, 101).
MOS-01224 Failed to add privileges "NetcbPrivilege SeAssignPrimaryTokenPrivile SeIncreaseQuotaPrivilege to account ....." ....
FJs-00012 Error when excuting script....
Any experience or help from your side?
Thanks in advance
HanseAtik

Hi. First login in your server with user "sid"adm after go to START --> RUN --> CMD
adn execute "R3trans -d" Tell what result .
About documentation read -->
service.sap.com/~form/sapnet?_SHORTKEY=00200797470000065912&
in left corner chek your release like :
"SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)"
After read the document for your release, for example if you use the Oracle on WIn and R/3 Enterprise 4.7 x 2.00 SR1 -->
Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle
Regards.
Edited by: Sergo Beradze on Mar 21, 2008 10:55 AM

Access printer installed under windows 7 64-bit from windows xp 32-bit

I have a CP1518ni attached via USB to a Windows 7 64-bit PC. I'd like to use this printer to also print from another PC, a Windows XP 32-bit. When I install a "network printer" on the XP machine, it says the driver is incorrect, probably because it is trying to pull a 64-bit driver over to the 32-bit PC. I've tried downloading and installing the universal driver for XP on the XP machine, but it also says the driver is incorrect when I choose the CP1518 on the Windows 7 PC. Can someone please point me towards a How-To article on this? Or, must I attach the printer to my router in order for both machines to use it?

Welcome to the forums! Are you trying to set the printer up to be wireless or just share the printer from the 64 bit computer to the 32 bit computer? You can share the printer from the 64 bit computer across your network. Here is how to setup print sharing:
Peer to Peer Printer Sharing in Windows XP and Vista
Hope this is what you are looking for!
-SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Partition couldn't be modified after uninstalling Windows consumer preview

I uninstalled Win Consumer Preview on my Macbook (Lion) using Bootcamp. An error showed up just as it got done. Since then, the Partition couldn't be modified because it contains CoreStorage physical volume. Help!

I uninstalled Win Consumer Preview on my Macbook (Lion) using Bootcamp. An error showed up just as it got done. Since then, the Partition couldn't be modified because it contains CoreStorage physical volume. Help!

Windows Deployment Services PXE Installation of Windows 10 Preview and Server vNext Technical Preview Failed

The automated answer file associated with Windows 10 Enterprise Technical Preview x64 (9481) and the Windows Server Technical Preview x64 (9841) seem to be incompatible. No problem adding both wim files to WDS, this completes without issue.
When trying to install both the Server vNext Technical Preview and Windows 10 Enterprise Technical Preview Via Network Installation (PXE) both encounter errors. The Server PXE Installation wont even commence after choosing the vNext Operating system installation,
and choosing the Windows 10 operating system encounters a "answer configuration error" towards the end (maybe the generalization pass?).
Anyone have a work around for configuring the answer file? or maybe a more positive experience?

We're playing around with Windows 10 TP and Server vNext also. For Windows 10 TP i got PXE based deployment running with unattend.xml from Windows 8.1. But i still did not get Server vNext deployment working.
I would also be happy if there's somebody out who has an idea on that topic.

Photoshop CS3 has no Print Option under Windows 7 64 bit

Owing to a severe power problem with my old desktop I have had to buy a new desktop PC, which has Windows 7 64 bit installed. My previous desktop has Windows XP.
I have successfully installed CS3 and have been able to open and manipulate images but when I come to print anything the Print option(s) are all grayed out! The options I am talking about are:
Page Setup
Print
Print One Copy.
Has anyone else experienced this?

Hi John,
I did nothing out of the ordinary when installing CS3 (that I know of). I don't recall being presented with options that gave me cause for concern.
This problem occurs when I run CS3 ordinarily and also when I right click and run it as an Administrator.
I'm a little wary about installing an emulator on top of my 'nice clean installation'. I guess I'll have to bite the bullet though. I'll definitley follow through on your link to the MS XP emulator.
Thanks.

HP 5550 Deskjet + USB Print server under Windows 7

I have a HP deskjet 5550 which still runs fine. I use the printer as a network printer, at first connected to my router. However, my latest Thomson TG789 vn router does not support network printers anymore, so I switched to a dedicated network-to-USB print server set-up, using a separate Ethernet to   USB 2.0 Print Server device. The printserver is connected to my network switch, and gets an IP address via DHCP.
This works fine for machines running Vista (and XP before) but for some reason not for Windows 7, while the HP5550 Deskjet when directly connected via a USB cable to a Windows 7 machine works OK too.   When a print job is sent to the HP 5550 via the print server over the network, it looks like the printing is about to start, but the process halts at this point without further messages.
Also the HP Print and Scan Doctor - often a very useful tool - is in this case not able to make contact with the printer via the print server and to resolve the issue.
This may just require a small tweak; Perhaps anyone else encountered this issue and has the solution?
Thanks for sharing.
Jan Dijckmeester

I have a HP deskjet 5550 which still runs fine. I use the printer as a network printer, at first connected to my router. However, my latest Thomson TG789 vn router does not support network printers anymore, so I switched to a dedicated network-to-USB print server set-up, using a separate Ethernet to   USB 2.0 Print Server device. The printserver is connected to my network switch, and gets an IP address via DHCP.
This works fine for machines running Vista (and XP before) but for some reason not for Windows 7, while the HP5550 Deskjet when directly connected via a USB cable to a Windows 7 machine works OK too.   When a print job is sent to the HP 5550 via the print server over the network, it looks like the printing is about to start, but the process halts at this point without further messages.
Also the HP Print and Scan Doctor - often a very useful tool - is in this case not able to make contact with the printer via the print server and to resolve the issue.
This may just require a small tweak; Perhaps anyone else encountered this issue and has the solution?
Thanks for sharing.
Jan Dijckmeester

No output on job step output log with perl's print statement under WINDOWS

Running a perl script ( ActivePerl 5.8.8.x ) on a remote WINDOWS box through llinux-based EM 10.2.04 deployment procedure, in the EM job step output log I've noticed that the print statement in that perl script displays nothing for array or element from array but displays proper value for any scalar variable. Any clue for this kind of issue ?

Running a perl script ( ActivePerl 5.8.8.x ) on a remote WINDOWS box through llinux-based EM 10.2.04 deployment procedure, in the EM job step output log I've noticed that the print statement in that perl script displays nothing for array or element from array but displays proper value for any scalar variable. Any clue for this kind of issue ?

Printer Configuration under Windows for Bulk Printout

Dear Expert,
We have configured Canon IRC 2880/C3380 printer. We are trying to print 6000 printout at a time but we are not able to print. This device is not listed under device support category in sapnote 8928.
When we are trying to print 499 pages we are able to print but not 6000 printout at a time. Since this device is not listed under sap supported printer list so we have configured as SAPWIN & Access method we are using is G. But there is restriction for mass printing when device is defined as fronted printer.
Please advice how we should configure so it can print 6000 printout at a time.
Regards
Santosh

Hi,
Can you tell me what you have tried so far and how did you set?
Firstly please update all network adapter driver.
After that, do the following:
1. Open the Command Prompt (Admin).
2. Run "Ipconfig /all" to check your nics IP information.
3. Use route command tell the computer which interface you want the packets to leave from.
Assuming Network A is...
10.10.11.0 /24
Router is 10.10.10.1
and Network B is...
10.10.12.0 /24
Router is 10.10.10.2
then use this command:
route add 10.10.11.0 mask 255.255.255.0 10.10.10.1 -p
route add 10.10.12.0 mask 255.255.255.0 10.10.10.2 -p
Hope this helps.
Karen Hu
TechNet Community Support

Itunes installation under windows 7 64 bit does not work

I have several versions of iTune downloaded. During installation no errors. After the installation i can't find Itunes in all programs.
Also in the map programm files there is no Itunes.
I need to put my contacts on my new iphone 4.
thanks

This has worked for some of us but not all. Go to control panel and uninstall itunes and icloud, restart pc, go to apple site and download itunes and icloud. Good luck.

Shutting down AS infrastructure and portal installation under Windows

Hi,
will the batch commands in:
Stop Application Server Control
Infrastructure Instance stoppen
do the trick?
i still see the following processes running- although the batch files give me a succes message:
emagent.exe
emdctl.exe
ocssd.exe
java.exe
any suggestions?

http://download-west.oracle.com/docs/cd/B14099_12/core.1012/b13995/start.htm#sthref298
or
http://tahiti.oracle.com

Firefox 16.0.2 do not complete the installation under windows 7 and keep doing add-ons compatibility tests and asking me if I want to send feedback to Mozilla

It works as if it was doing the first run after updating. The point is that it never ends. After every launch it goes tru the whole cycle as if it were being installef for the first time.

You can check for problems with preferences and try to rename or delete the prefs.js file and possible numbered prefs-##.js files and a possible user.js file to reset all prefs to the default values.
*http://kb.mozillazine.org/Preferences_not_saved
It is possible that there is a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to check if there is a compatibility update available.
If this hasn't helped then also try to delete the addons.sqlite file.

Installing Adobe CS6 on Windows 8 (2012) Consumer Preview

Hello,
First off, yes I know it isn't supported by Adobe (yet), however, I want to present to you my case for future users.
I have been investigating an issue I have ever since I got an Error 101 with Adobe Download Assistant where after extracting, I get an error from "Set-up.exe" that it failed to initalize. What is even more interesting is that CS5 trial can run smoothly.
PDApp.log:
5/23/2012 11:37:36 [INFO] Setup - Build Version - 6.0.335.0
5/23/2012 11:37:36 [INFO] Setup - Logging Level verbosity Set to 4
5/23/2012 11:37:36 [INFO] Setup - Start Adobe Setup
5/23/2012 11:37:36 [INFO] Setup - TimeLog: Bootstrapper Start
5/23/2012 11:37:36 [INFO] Setup - TimeLog: Start initial checks
5/23/2012 11:37:36 [INFO] Setup - Dictionary Path: G:\DesignWebPremium_CS6_LS16\Adobe CS6\resources\Dictionary\en_US\stringTable.zdct
5/23/2012 11:37:36 [INFO] PIM - Trying to access xml at path:G:\DesignWebPremium_CS6_LS16\Adobe CS6\resources\setup.xml
5/23/2012 11:37:36 [FATAL] PIM - Failed to load xml. system error:0
5/23/2012 11:37:36 [FATAL] Setup - Could not initialize ADXML object
5/23/2012 11:37:36 [FATAL] Setup - Unable to initialize. Error parsing setup.xml file
Meanwhile, the log even said that "Reboot is pending", and I have rebooted several times and also tried to find the registry key "InProgress" myself. There was no sign of that key anywhere.
Solutions I have tried:
Rebooted
Deleted Adobe OODE directory
Used Adobe CS cleaner tool
Redownloaded trial from Assistant Manager and directly from trial2.adobe.com
Checked to see I had enough disk space. (My partition has 250 GB left).
I am an admin, and ran the program under administrator.

I haven't seen any success trying to run CS5 or CS6 under Windows 8 Consumer Preview yet.
For CS6, It turns out that the whole problem was a corrupted .7z file from Adobe Download Assistant. I even downloaded the CS6 Master Collection .7z and the Web .7z directly with Chrome & IE 10. I don't know how they became corrupted in the first place with these many options.I managed to get it working from downloading the extracted files from another source. After that, every program worked, including Dreamweaver with no compatibility mode.
For CS5, it is also the corruption of the .7z file. Again solved by getting a unextracted source to get it working on Windows 8 Consumer Preview. CS5 works perfectly on my system too.
try in compatibility mode... even dreamweaver never opened directly in my windows consumer preview machine. after running compatibilty assistant and saving compatibility for xp-sp3 it worked perfectly
Simply, no.
Jeff, Adobe did well and I like the improvements the team made. I can tell you that the entire Adobe CS6 does work well with Windows 8 Consumer Preview (fully updated) smoothly.

HP Deskjet Ink Advantage K209a-z - driver for Windows 8 Consumer Preview

1. Product name and number: HP Deskjet Ink Advantage K209a-z, CH368
2. Operating system: Windows 8 Consumer Preview (64-bit)
3. Error message: "The driver for Deskjet Ink Advant K209a-z is not installed. Install the latest driver for the device."
4. Any changes made before: Computer has been in repair and new operating system was installed (Win8 CP). I worked on Windows XP before repair and printer was going without any troubles.
5. I'd like to know when the driver will be available for Windows 8 Consumer Preview.

Hey Krzyskos,
I suggest using the HP Windows 8 Install Utility for the best chance to get the printer working on Windows 8 preview. As for the drivers, the release of the Windows 8 drivers are expected to be after the office release of Windows 8.
The above link will direct you to the Windows 8 section where you should address any further Windows 8 questions.
Take care!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

My LaserJet CP1215 installed regularly in windows 8 consumer preview ...

... but doesn't appear connected!
And doesn't work at all. What shell i do ? I'm using it on a HP-Pavilion System Model KC887AA-ABZ a6270.it System Type X86-based PC Processor AMD Athlon(tm) 64 X2 Dual Core Processor 5000+, 2600 Mhz, 2 Core(s), 2 Logical Processor(s)

Hello!
HP understands that Microsoft has released a Windows 8 Consumer Preview (Beta) version. HP is not currently supporting any Windows Consumer Preview (Beta) operating system versions. If you have any questions about the Windows 8 Consumer Preview (Beta), may I refer you to Microsoft's website at: www.microsoft.com?
I work for HP.
I work for HP.

Printer installation under Windows 8 Consumer Preview

Similar Messages

Maybe you are looking for