"printer installer" window shows up at every boot after installing printer

After installing successfully a Samsung printer, everytime I boot Mountain Lion there is a "printer installer" window shows up.
Any way to get rid of this?
Regards,
Vincent

I've come across someone who had this before - they'd forgotten to take the installer disc out of the optical drive so it ran its installer at every boot. Any chance that's it?

Similar Messages

Windows 8.1 Pro not booting after install of Hyper V - ASUS z87 + intel 4670K

Hi,
I am running windows 8.1 pro on a intel 4670K 4th Gen Haswell CPU and ASUS z87 plus motherboard. 16gb of kingston hyperx ddr1600 memory.
I have enabled virtualisation technology in the bios. CPU has SLAT.... or Extended Page Table, as intel likes to refer to it.
When I install HyperV platform and management tools the computer configures and reboots
AFter reboot it brings up the blue window image and spinning circle of dots for a while then reboots. It does the same thing again and then reboots and goings into repair mode and asks me to do a system restore. It then restores to before they HyperV install.
I've tried turning off xHCI mode (i.e USB 3.0) in the bios as this seemed to be a known issue with some gigabyte boards. This did not rectify the issue
Updated to latest asus mainboard bios 1405. Same issue still occurs upon install of hyper V.
Automatic repair does not work and I have to restore from system restore point.
I performed a clean boot after installing the feature and it still couldnt boot to windows.. it just sits at windows logo and then restarts a few times and then launches the startup repair. Once the startup repair begins, the only way I can get into windows
is restoring to a system restore point from before the hyperv feature install.
Please see the following logs which may have further information:
CBS Log
https://skydrive.live.com/redir?resid=1F523A0B8734322C!685&authkey=!AGMjUfosLFpzYNI
Setuperr
https://skydrive.live.com/redir?resid=1F523A0B8734322C!682&authkey=!AKS8Jb1S6W2IAH8
Windows update
https://skydrive.live.com/redir?resid=1F523A0B8734322C!683&authkey=!AJdWKuKj4negBoQ
Windowsupdate(1)
https://skydrive.live.com/redir?resid=1F523A0B8734322C!684&authkey=!APplVjuLpNZW_AY
I logged a job with asus support and their response was:
"Clear CMOS and ensure virtualisation technology is turned on in BIOS. If it still doesn't work, seek assistance from Microsoft"
Previously asked this question but took a while to get back to update with the logs and it was listed as Answered.
This issue is still existing and I'd appreciating any assistance.
Simon

Hi Simon,
Thank you for uploading the Log files.
According to the log files, no actuate clue can be found.
So, I suggest you upload the dump file so that we can help you analyze them.
Automatic Memory Dump Settings on Windows 8:
http://www.thewindowsclub.com/automatic-memory-dump-settings-windows-8
It also applies to windows 8.1.
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Note: I highly recommend you use SkyDrive to upload collected files and to post screen shots/pictures. Although you might not be used to it, SkyDrive features a lot of free advanced functionality around file storage capacity, sharing,
privacy, and collaboration:
http://skydrive.com
Regards,
Kelvin hsu
TechNet Community Support

How can I make a window show up in every desktop?

How can I make a window show up in every desktop so when a user switches views it's still on their screen, using Xcode, Applescript-ObjC?

hi, try this:
public static void centerWindow(Window win){
Dimension screenSizeWithSpeedBar = Toolkit.getDefaultToolkit().getScreenSize();
Dimension screenSize = new Dimension(screenSizeWithSpeedBar.width,screenSizeWithSpeedBar.height-25);
Dimension frameSize = win.getSize();
if (frameSize.height > screenSize.height)
frameSize.height = screenSize.height;
if (frameSize.width > screenSize.width)
frameSize.width = screenSize.width;
win.setSize(frameSize);
win.setLocation((screenSize.width - frameSize.width) / 2, (screenSize.height - frameSize.height) / 2);
It works with following arguments: JWindow, JFrame and JDialog

HP4501e "print spooler off" error after installing printer update

Motorola Android OS, getting "print spooler off" error after installing printer update... have rebooted both printer and phone to no avail... any help ideas?

Loralee,
?? I am sorry the computer is not working. I don't work for HP and cannot comment on lawsuits or other calamities.
If the notebook worked prior to an update -- and this is an entirely different can of worms and problems -- and you think that there is any chance the notebook is just in some sort of "tangled" state and not completely hosed for some reason, you can try the following non-lethal device reset:
Create a Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
If you are using a Notebook:
Close all your programs and shut down the computer
Disconnect everything (little Unifier for the keyboard / external mouse can stay)
Perform the Hard Reset for your notebook model
Boot the computer and log in
Reminder: Hard Reset is just a device Reset. The procedure does not wipe out your files nor does it destroy your Windows setup in any way. This type of reset "clears the cobwebs". Depending on the root cause of the problem, this procedure can fix a variety of computer glitches.
This does not fix severe Operating System errors -- it is just a device reset. It can fix minor problems that updates sometimes cause.
============================================================================
I am sorry you are having so much trouble.
Other help:
HP Mobile Printing
You can call HP for help --
Contact HP – USA - Phone Assistance
List of
HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
Warranty Required – USA and Canada
USA – Contact HP // Self-Help – Email - Chat
Happy New Year, Loralee! I know it seems to be getting off to a rocky start!
Click the Kudos Thumbs-Up to show you appreciate the help.
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Click Accept as Solution when the Answer provides a Fix or Workaround!
Kind Regards,
Dragon-Fur

Will not start even in safe boot after installing latest camera update

MacBook Pro will not start even in safe boot after installing latest camera update.
I started my machine and did a software update. Only the camera update needed. So installed and when required I pressed restart. It restarted and did install. Then restarted again. I expected to get to the login screen and it turned itself off. Tried three more times. Each time shutting off. I unplugged everything, and pressed start waiting for log in window. No it shutdown before the log in window. I then tried safe mode and that did not work either on three more occasions.

I have managed to resolve some issues. I can now restart the machine via a CD boot. If I do cmd C into something like tech tool pro, then restart from that disks menu it restarts every time.
If I try a safe start it shuts down. If I try a normal start it shuts down. I have managed to repair permissions and that cleared up some start up permissions but with no improvement to the boot problem. The only way to load is via the cmd-C boot option. Any other ideas?

Hello i installed windows 7 on my mac and after installing it i gan't go back to mac os x

Hello i installed windows 7 on my mac and after installing it i gan't go back to mac os x

Did you use Boot Camp Assistant?
You should be able to hold down the option key whilst booting in order to select which OS you want to boot into.
Clinton

Macbook pro won't boot after installing update 10.9.3

macbook pro won't boot after installing update 10.9.3

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

How come my mac isnt showing my external hard drive after installing os x maverick? and how to i fix that??

how come my mac isnt showing my external hard drive after installing os x maverick? and how to i fix that??

How do you mean it isn't showing the external drive? If you mean on the desktop, click Finder on the menu bar, Preferences, General and check the boxes for Show these items on the desktop - make sure hard drives is checked.
If you mean it is not showing in Finder or Disk Utility, make sure it is turned on, reboot and see if that mounts it so it shows up.

Very slow boot after installing 10.10.3

insanely slow boot after installing 10.10.3, it takes 10times longer compare to 10.10.2, using MBA 2014

Open System Preferences, select Startup Disk, and make sure your internal drive is selected as the startup disk. Then click restart!
This worked for me, personally with the same issue.
Good luck!

Print Option Window Pop-Up at Every Print!

I need to run an action script that setting some print options then print the document without the print option window popping-up. Is there anyway to prevent the print option window from popping-up everytime it prints from a PC? Any help will be appreciated. Thanks!

Thanks for your response. I was told that it's because the script was written from a Mac and I tried to run on the PC. It works after I rewrote the script.

Windows 7 x64 Professional does not boot after install

Hello.
I created a Windows 7 VM in Windows Server 2012 R2 Standard Hyper-V, all the installation process done successfully, but after installation, it failed to boot and shows a black screen, and didn't boot after it.
Following is the event log occurs.
'Win-7_QA-Testing' was faulted because the guest executed an intercepting instruction not supported by Hyper-V instruction emulation. If the problem persists, contact Product Support. (Virtual machine ID 5B827557-7009-4D83-AA7C-26A45651EC3A)
VmName
Win-7_QA-Testing
VmId
5B827557-7009-4D83-AA7C-26A45651EC3A
FailureCategory
<not a known problem>
InstructionByteCount
0
InstructionBytes
Rax
0x10
Rbx
0x80
Rcx
0x0
Rdx
0x80
Rsp
0x200
Rbp
0x6e08
Rsi
0x25da4a
Rdi
0x7da4a
R8
0x0
R9
0x0
R10
0x0
R11
0x0
R12
0x0
R13
0x0
R14
0x0
R15
0x0
Rip
0x9d
Rflags
0x10002
FpControlStatus
7F030000000000000000000000000000
XmmControlStatus
0000000000000000801F0000FFFF0000
Cr0
0x10
Cr2
0x0
Cr3
0x0
Cr4
0x0
Cr8
0x0
Xfem
0x0
Dr0
0x0
Dr1
0x0
Dr2
0x0
Dr3
0x0
Dr6
0xffff0ff0
Dr7
0x400
Es
0002000000000000FFFF000020009300
Cs
00000B0000000000FFFF000000B09F00
Ss
0002000000000000FFFF000020009300
Ds
0002000000000000FFFF000020009300
Fs
0002000000000000FFFF000020009300
Gs
0002000000000000FFFF000020009300
Ldtr
0000000000000000FFFFFFFF00000000
Tr
0000000000000000FFFF000000008B00
Idtr
000000000000FFFF0000000000000000
Gdtr
000000000000270000002B0000000000
Tsc
0x3b48531f8c6
ApicBase
0xfee00900
SysenterCs
0x0
SysenterEip
0x0
SysenterEsp
0x0
PendingInterruption
0x0
Any help will be appreciated.
Thanks

How many vCPU and how much RAM have you given the VM?
Are you using alt +F10 and going into the shell to format the VHD and prior to the installation?
Are you using media that has SP1 slip streamed into it?
Have you tried forcing the vm off and then back on again?
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
vCPU = 1
RAM = 2048MB
No, I haven't try formatting the VHD between the window installation. This is the first time I'm facing the issue. It is a simple windows 7 pre activated iso file, not powered by SP1. I have tried forcing the VM off and ON again, but simply i can't get the
window screen back. Whenever the VM malfunctioning like this, then it cannot be shut down from the Hyper-V directly, but to make the VM Turn Off manually.

Windows 8.1 won't boot after repair loop fix

I have a 1 year old Gateway desktop with Windows 8.1 installed at the factory so I have no Install disk. My problem began when the computer went into a repair/recovery loop which I found out is a common unresolved bug for Windows 8.1. After hours and hours
of internet search and trial and error I was able to get the repair loop resolved by going into command prompt and typing "bcdedit /set {default} recoveryenabled No}". I then tried rebooting and the Recovery page came up stating:
Your PC needs to be repaired.
The operating system couldn't be loaded because a required file is missing or contains errors.
File: NETIO.SYS
Error code: 0xc000000f
When I tried all of the options to address this problem none of them worked. I can't even boot into safe mode. Any suggestions?

Hi Boomer3s,
Can we boot into the Windows Recovery Environment now (Restart and keep pressing "Shift")?
If the Windows Recovery Environment is not available ,we can choose to boot from a installation media .We can make a Windows 8.1 installation media here.
Create installation media for Windows 8.1
http://windows.microsoft.com/en-HK/windows-8/create-reset-refresh-media
a)      Insert the installation DVD or USB and boot Windows 8.1 from it.
b)      In the ‘Windows setup’ page select the ‘Language to install’, ‘Time and currency format’ and the ‘keyboard or input method’ and click on ‘next’.
c)       Click on ‘Repair your computer’ and select ‘Troubleshoot’.
d)      Click on ‘Advanced options’ and select ‘Automatic Repair’ and select the operating system.Or the "System restore option "
Hope this helps
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Hal.dll is missing after first boot after installing Windows

I've used Boot Camp Assistant to resize my existing Macintosh HD (even though I left 700GB free space on the disk in Disk Utility during setup; it would only allow me to resize an existing disk). I then let it reboot and started XP setup fine. Chose the correct partition and formatted as NTFS (since it's larger than 32GB), went through copying all the files successfully, and after it automatically rebooted, I get this:
Windows could not start because the following file is missing or corrupt:
<Windows root>\system32\hal.dll.
Please re-install a copy of the above file.
I've been following the documentation which is pretty thin when it comes to the actual install. It gives the impression "everything just works" but in my case it doesn't. How do you actually install Windows on a Mac and have it be able to boot after the apparently-successful installation process?

It may be my fault because I did a full format, and when it took so long, I rebooted, deleted the partition, and recreated it and told it to do a quick format. The instructions say not to create or delete a partition "other than as noted" in the picture or else I could lose my system partition. I didn't lose that but my problems might have been another result of my doings.

Windows 8.1 Pro will not boot after installing iTunes 11.1.5.5

It's a little hard for me to accept that this is true, but the symptoms seem to be pointing the direction of the title of this thread. I have an all-in-one touch-screen Gateway computer that came with windows 7 (yeah, a win7 machine that came with touch, yeesh) and I put windows 8.1 pro 64-bit on it with a clean install (actually windows 8 was the clean install and then I did the free microsoft store upgrade to 8.1). It has 4GB of RAM and has a Pentium Dual Core cpu @ 2.2 Ghz. It was running fine with the previous version of iTunes, but as soon as I updated to iTunes 11.1.5.5 (and there may have been other apple things that updated too (ie quicktime of course), the computer prompted me for a reboot and froze during the reboot process (before it even shut down). Then it had trouble booting into windows. I ran startup repair to no avail and decided to do a sytem restore. My most recent restore point was from a few weeks back, before iTunes was even installed at all on the machine. I went back to that point and the machine worked fine again. Then I installed iTunes 11.1.5.5 and the same exact problem occurred - it froze while shutting down after the iTunes install and then would not boot into windows 8. I did another system restore and have not put iTunes back on. The system is working fine. I'm going to try to find out if there's a way to download older versions of iTunes, so that I can install it, but the bigger issue here is: Is this a legitimate bug/incompatibility with some hardware or software or driver that I have on this computer? I run a computer support business so I know my way around but I don't have time to troubleshoot this from scratch. Anyone else seeing this? Apple employees...a little help here? Any input?

let it sit for about 30 min and still got nothing
I then did a "hard shutdown(just pressed power button till it turned off the computer)"
That may not have been long enough. But a "hard shutdown" would definitely have been construed as a problem due to the update.
Asus apparently is a known problem case...
http://blogs.msdn.com/b/usbcoreblog/archive/2013/10/19/help-after-installing-windows-8-1-the-superspeed-ports-of-my-asus-system-don-t-work.aspx
Link courtesy Darrell Gorter [MSFT] found here
"Windows 8 Keyboard and mouse not working"
http://social.technet.microsoft.com/Forums/en-US/w8itprohardware/thread/06e9b341-0619-4085-acbf-e2f0133ca428?outputAs=rss
(RSS given to avoid overhead of opening long thread for IE users)
Note that there may be useful tips for you in both of those threads' comments.
Robert Aldwinckle

Windows 7 wont boot after install of boot camp drivers

I have been trying to get boot camp on imac mid 2010 with Maverick. TodayI used
Boot Camp Support Software 5.1.5621
The first set of drivers
Boot Camp Support Software 5.0.5033
kept crashing on windows. Today I noticed a new set of drivers, well its the same issue. If I leave off the boot camp drivers windows is fine, except no sound and other driver missing issues but it works. The problem seems to be Mav or the drivers, before updating to Mav everything was fine. Sometimes I can even get to the windows log on screen, at one point I was able to log on and do things. So being smart, I restarted and the problem came back. Who says Macs dont have issues.
Any thoughts

Just ran into this same issue.
My problem got resolved after using the x64 version DVD of Win7 (just x64 instead of the DVD that had both x86 and x64 versions).
What I did:
My host is Windows 8.1
After installing Windows 7 x64 as VM on my 8.1 based laptop two days ago, I wanted to do the same on my desktop PC, but I had the same issue described here.
I used a DVD just with the x64 version for my laptop and a DVD with both x86 and x64 version for my desktop.
Tried repairing as advised by a post, but got the error: "This version of System Recovery Options is not compatible
with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of windows."
I exported and imported the VM from my laptop to my desktop to test it and it ran with no problems.
So I tried the DVD that had just the x64 version of Win7 and that installed without issues.
I'm curious if this happens only when a DVD with more than one Win7 versions is used.

"printer installer" window shows up at every boot after installing printer

Similar Messages

Maybe you are looking for