PRINTER MISSING HALF THE TEST PAGE

WHEN PRINTING DOCUMENTS WORDS AND LINES MISSED OUTWHEN PRINTING TEST PAGE ONLY HALF THE WORDS PRINTED OUT

Hi , I see that you are having issues with missing lines and text. I would like to help you. Please try the steps in this document to see if it will help resolve this issue. Fixing Print Quality Problems for the HP Deskjet 1050, 1050A, 2050, and 2050A All-in-One Printer Series. Are you using Genuine HP Cartridges?
What are the ink levels? If you appreciate my efforts, please click the 'Thumbs up' button below.If you have any issues, please let me know what steps you have taken and the results. Thank You.

Similar Messages

Printer does not print. Even the test page did not print. I put in a new cartridge.

Printer doesn't print.

adnerb wrote:
My printer does not print the computer screen says scanner failure. I have a HP Officejet 5610v All-in-One printer. The printer is connected with USB. The operating system is Windows Vista. Help!!
See the troubleshooting steps in this page.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How can I print the test page with the Arabic type from the command line

Hi,
I have been trying to make the tool for printing the test page from the command line on the Arabic OS. I used "rundll32 printui dll printuientry" with "/k /n" options. My tool is to print the test page in all OS when pushing the
button.
Normally, in the Arabic Windows, the test page is printed with RTL type when printing the test page in the "Devices and Printers". But in my tool, the test page is printed with LTR type. I'm confused because of this result.
Is it possilbe to print the test page with RTL type when using the "rundll32 printui dll printuientry"? If it is possible, could anyone give me the hint or information for resolving?
Please check for me.

Hello,
Thank you for your post.
Your issue is out of support range of Test Tools in Visual Studio 2010 and 2012 forum which discusses Visual Studio Test issues.
I am moving your question to the moderator forum ("Where is the forum for..?"). The owner of the forum will direct you to a right forum.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Printer officejet 4500 G510-m only prints the test page

What can I do?!?!?!?
the same problem here, although I have two laptops, one of them with windows 7 and everything is works great, made a full installation of the printer app, while on the second laptop with windows xp pro, the printer doesn't work.
Tried to install the full pack and tried the minimal one, didn't work in no one of these states.
the sole thing it can print from the win xp laptop is the test page from the printer configuration window..

What operating system?
Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I have a hppsc 1310 series that prints the test page, butr will not print the selected document.

I have a hppsc 1310 series that prints the test page when turned on, but will not print the document I want to print. It shows in STATUS as printing, but it does not print. I keep getting a message to install software and I do this. I then get a message software installed, but it still will not print. This just started about five days ago.

Hello ausection29,
Most likely what is printed when you turn on the PSC 1310 is an alignment page. To complete the alignment process you need to place this page on the scanner glass and press the Scan button. The top of the page should be towards the left of the printer I believe, double check this on your printer (there should be a small icon next to the scanner glass showing which way the paper should be placed on the glass).
You can have a look at step 5 in this document for a video of how to do this:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01577355&cc=us&lc=en&dlc=en&product=374568&tmp_...

When i cut from the web and paste onto pages, i am missing half the article, unless i change it to a smaller font.

when i cut from the web and paste onto pages, i am missing half the article, unless i change it to a smaller font. Even then the rest of the article is not continuing onto the next page, it seems like it is stuck in a text box but it wont expand. I must be missing something i just not figuring it out.

Many web pages uses a table system and when you copy you get the table too. Pages 09 retains the table. PAges 08 don't.
Tryy this: When you have pasted into a Pages document select some text and then hit Cmd + A to select all text. Paste into a new blank document. Tha tshould help.

HELP!! Canon Pixma MG2220 has no response when I select print or try a test page

I recently bought a Canon Pixma MG2220 printer for my home. When I installed the software and hooked it up to my laptop (toshiba with windows 7) and selected 'print' to try it out, nothing happens. The display just keeps flashing oddly like in a circle and nothing prints. When i tried a test print to diagnose the problem, nothing also. I tried several times yesterday and when I turned the printer on today it spit out the test page from yesterday. Am I missing something? I don't really know much about printers or drivers... Is it something simple that I keep overlooking?

Hi Tiffany11x,
The spinning symbol you see is the printer processing your data from the computer. Since it is taking a long time to print a test page, we could be dealing with a communication issue. Have you tried a different USB cable? A shorter good quality cable around 4 feet is ideal. Also, try connecting the printer to different USB ports on your computer to see if that helps.
Finally, to ensure that the hardware is functioning properly, make a basic black and white copy with your PIXMA MG2220. Keep an eye out for the spinning symbol again. A normal copy should only take a few minutes to process.
If you have any other questions, please feel free to Contact Us!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Page footer information is missing for the first page alone.

Hi All,
After exporting to text format, Page footer information is missing for the first page alone. Any reasons?
Thanks for any help !!
Rgds,
Shriram

If you search the Business Objects Articles (see the link to the left on this page) for Export Limitations documents you'll see that page footers/headers are not supported when exporting to Text format (same for Page N of M.
If you open up a text file in Notepad - you'll notice that there is no Insert | Page Break (as there is in MS Word).
CR can't possibly know in advance where the page breaks will occur in a text document (or the application in which the document is opened) so most anything in CR having to do with pagination is not supported when exporting to Text.
The Export Limitations document is a handy item if you do a lot of exporting.

Cannot Test this Web Service using the Test Page

Hello,
I'm using
- JDeveloper 11.1.1.3.0
- SOA Suite 11.1.1.3.0
- Weblogic Server 10.3.3
- Windows XP SP3 (german version)
Now I'm having a BPEL-Process (SOA) Project created in JDeveloper and deployment to the server works fine, i.e. the service can be seen in enterprise manager.
But if I want to test the service using the webservice tester it get the following error if I copy the URL for getting the WSDL file to another browser tab:
Cannot Test this Web Service using the Test Page
Endpoint Name : FabricProvider (Service Description)
You can test the Web Service using a Java client.
Failed to Load a composite for composite identified by default/ReisebuchungService!1.0*soa_6aebb5fb-7830-497b-b853-839518d112f0
Please verify that the composite has been deployed.
Can you help me with this issue? I have no idea where to start debugging or resolving the problem.
Thanks in advance

Heya
others and I face the same issue, reported here:
TP4: Cannot Test this Web Service ...
Oracle is not too responsive on the issue though.... :(
Cheers Christian.

HT1766 Hello there, started to sinc my iPad 3 to my iPhone 5 with iCloud and a lot off the items did copy over, I was connected to a power supply but for some reason it's still missing half the items and I am struggling to retrieve them can you help pleas

Hello there, started to sinc my iPad 3 to my iPhone 5 with iCloud and a lot off the items did copy over, I was connected to a power supply but for some reason it's still missing half the items and I am struggling to retrieve them can you help please.
Thank you Callum Gordon

Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
Its a shame you have to go through what you going through.
Good Luck

Can see the test page, Can register the provider but error in portlet

Hi all,
I have done the following settings in my web.xml
web.xml
<servlet>
<servlet-name>calsample</servlet-name>
<servlet-class>oracle.portal.provider.v1.http.HttpProvider</servlet-class>
<init-param>
<param-name>provider_root</param-name>
<param-value>D:\pdk\pdkoct\pdk\urlservices\providers\calsample</param-value>
</init-param>
<init-param>
<param-name>sessiontimeout</param-name>
<param-value>1800000</param-value>
</init-param>
<init-param>
<param-name>debuglevel</param-name>
<param-value>3</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>calsample</servlet-name>
<url-pattern>/calsample/*</url-pattern>
</servlet-mapping>
<servlet>
<servlet-name>CalendarServlet</servlet-name>
<servlet-class>com.jsos.calendar.CalendarServlet</servlet-class>
<init-param>
<param-name>config</param-name>
     <param-value>d:/tomcat/conf/calconf.txt</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>CalendarServlet</servlet-name>
<url-pattern>calendar</url-pattern>
</servlet-mapping>
provider.xml
<provider class="oracle.portal.provider.v1.http.DefaultProvider" session="true">
<portlet class="oracle.portal.provider.v1.http.DefaultPortlet" version="1">
<id>1</id>
<name>CalendarServlet</name>
<title>My Calendar Servlet</title>
<description>This is my Calendar Servlet implemented as a ServletRenderer.</description>
<timeout>5</timeout>
<timeoutMsg>Calendar Servlet Renderer example timed out</timeoutMsg>
<hasHelp>true</hasHelp>
<hasAbout>true</hasAbout>
<showDetails>true</showDetails>
<showEdit>true</showEdit>
<showEditDefault>true</showEditDefault>
<acceptContentTypes>
<item>text/html</item>
</acceptContentTypes>
<portletRenderer class="oracle.portal.provider.v1.http.ServletPageRenderer">
<appPath>/pdk/calendar</appPath>
<appRoot>D:\tomcat\webapps\pdk\WEB-INF\lib</appRoot>
     <showServlet>com.jsos.calendar.CalendarServlet</showServlet>
</portletRenderer>
</portlet>
</provider>
With the above settings, I can see the test page at http://<server_ip>:port/pdk/calsample.
I am able to register the provider on the Portal server as well.
While adding the portlet to the portal page, the Calendar Portlet is listed there.
But, when I press the preview button next to it, It shows "Error: The listener returned the following Message: 500 Internal Server Error".
Please give me a clue where I am going wrong.
Thanks in advance.

Well, over the past few days while desparately trying to make my portlets work, I have tried several things. I started initially with a downloaded version of pdk that contains samples of v1. My first message above reflects the setup I used with v1. While trying to figure-out the problem for error 500, I tried v2 but the same problem persisted.
However, the clue by Mr. Peter Moskovits to check the application.log has helped me to finally resolve the problem.
Here is my new WORKING setup:
\WEB-INF\web.xml:
<context-param>
<param-name>oracle.portal.log.LoggerClass</param-name>
<param-value>oracle.webdb.log.ServletLogger</param-value>
</context-param>
<context-param>
<param-name>oracle.portal.log.LogLevel</param-name>
<param-value>7</param-value>
</context-param>

<servlet>
<servlet-name>SOAPServlet</servlet-name>
<display-name>SOAPServlet</display-name>
<description>Extended Portal SOAP Server</description>
<servlet-class>oracle.webdb.provider.v2.adapter.SOAPServlet</servlet-class>

<init-param>
<param-name>invalidation_caching</param-name>
<param-value>true</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>SOAPServlet</servlet-name>
<url-pattern>/providers</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>SOAPServlet</servlet-name>
<url-pattern>/providers/*</url-pattern>
</servlet-mapping>
<servlet>
<servlet-name>CalendarServlet</servlet-name>
<servlet-class>com.jsos.calendar.CalendarServlet</servlet-class>
     <init-param>
     <param-name>config</param-name>
     <param-value>d:/conf/calconf.txt</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>CalendarServlet</servlet-name>
<url-pattern>/calendar</url-pattern>
</servlet-mapping>
\WEB-INF\providers\calendar\provider.xml :
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<?providerDefinition version="3.1"?>
<provider class="oracle.portal.provider.v2.DefaultProviderDefinition">
<session>true</session>
<portlet class="oracle.portal.provider.v2.DefaultPortletDefinition" >
<id>1</id>
<name>Calendar</name>
<title>Calendar Portlet</title>
<shortTitle>Calendar</shortTitle>
<description>This portlet is my calendar portlet.</description>
<timeout>30</timeout>
<timeoutMessage>Calendar Portlet timed out</timeoutMessage>
<renderer class="oracle.portal.provider.v2.render.RenderManager" >
<showPage/calendar</showPage>
</renderer>
</portlet>
</provider>
\WEB-INF\deployment\calendar.properties
serviceClass=oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter
loaderClass=oracle.portal.provider.v2.http.DefaultProviderLoader
showTestPage=true
definition=providers/calendar/provider.xml
autoReload=true
debugLevel=7
With the above setup, I am able to access the test page successfully at:
http://[server-ip]:port/jpdk/providers/calendar
Which lists my portlet, Calendar.
Upon registering the portlet provider with the above URL, the portlet provider lists my Calendar portlet there and it shows-up the portlet successfully there.
Thank you all.

I'm trying to print a multiple page document from my ipad using an Airprint printer. Only the first page is printing, Please help?

I'm trying to print a multiple page document from my ipad using an AirPrint printer. Only the first page is printing. Please help. The printer works correctly with my desktop and laptop.

What version of iOS are you using? Some people were having this problem before, and it was fixed when they updated to iOS 5.

HP4500 printer went off line. I can print the test page but nothing from the IMAS

Network down, re-set - now can't get the printer to function. HP4500 wireless. Was able to print a test page but when I try to print from the computer I get the "printer off-line" message. I don't know how to fix this.

Try removing the printer from the printer list, then re-add it.
Are you sure you have the latest drivers?

HP 3210 printer prints blank pages and only half the first page

When I updated to Firefox 4.0.1 my HP 3210 printer now prints blank pages before and after the correct page and then only prints half of it. It prints with no problem as before in Internet Explorer but I cannot keep going back to WExplorer just to print.

You have not said but it sounds like you are using a Macbook pro with retina display.
Pages is exhibiting all sorts of problems with the Retina display which Apple is supposedly working on.
Peter

Window to create a new incident missing in the home page of a key user.

Hi all,
we facing the following problem in SM 7.1 - SP10. We test the incident opening ZMIV as key user and in order to keep read-only the field "Installed base component", we applied the OSS note 1926788.
All seems ok, but when we define a business role ZSOLMANREQU, copy from SOLMANREQU, and we assign it to Role configuration Key ZSOLMANREQU, window able to create a new incident disappears in the home page of the key user.
Let me explain with some screen shot:
Whit this configuration for business role SOLMANREQU
the key user connecting to SAP CRM has the following home page (window to create a new incident exists):
When we change configuration:
The key user is not able anymore to create a new ticket in the CRM, as you can see below. The window is missing.
Is it possible to maintain the "Create new message" window?
Thnk yo very much
Best regards
Ines

Hi Vikram,
thank you for your reply!
I checked my customized role configuration key ZSOLMANREQ, but this is only a definition in the customizing:
SPRO/Customer Relationship management/UI Framework/Technical Role definition/Define Role Configuration Key
Or maybe did you mean Business role?
Thank you again!
Ines

PRINTER MISSING HALF THE TEST PAGE

Similar Messages

Maybe you are looking for