Printer no longer seen in Classic after update

I just loaded the latest 10.4.7 combo update. I can print to my Lexmark Z32 printer in OSX apps but not using the one CLASSIC program I use (and depend on), Quark 4.1. The OS9 chooser no longer sees the printer and the printer utility cannot locate the printer. This was never a problem before the update. I have re-loaded the latest Lexmark OS9 driver (several times, both with the printer attached and with USB unplugged) with no luck and have repeatedly deleted printer preferences. Have also loaded the latest Lexmark OSX driver with no change. My MacMini (pre-Intel chip) communicates with the printer via Appletalk. Can someone help???? Many thanks.
Ron S

Thanks for the suggestion but no luck. LW8 sends the file to the printer as Temporary Cusom PS file. Printer utility says job is printing then reverts to jobs stopped. Does not print. (This is probably a side effect of another new problem I've had since the update: after I have quit out of Classic I cannot print again in OSX until I have restarted.) Also I do need the print quality options available with the Lexmark driver.
Ron S

Similar Messages

Camera roll not seen in album after updating ios8

Camera roll not seen in album after updating ios8

That is intentional. The Camera Roll album is no longer show as a separate album, also My Photo Stream is no longer a separate album. This Help document explains, where you will see the photos now.
Get help finding your Photos in iOS 8http://support.apple.com/kb/HT6464
Have you enabled the "Summarise Photos" option? Then disable it.
By default, Photos displays a representative subset of your photos when you view by year or by collection.
To see all your photos, go to Settings > Photos & Camera, then turn off Summarize Photos.
And did you migrate your photos from iPhoto? Some photos may still be in the iPhoto Library, that is no longer supported:
See: Migrating from iPhoto for iOS to Photos on iOS 8

Cannot longer browse the internet after updated 10.5 to 10.5.8

cannot longer browse the internet after updated 10.5 to 10.5.8

Did you repair permissions?
Did you backup your data prior to installing?
Are you using any non-Apple routers to connect to the modem?
Is this with a notebook or a desktop Mac?
Are there any other Macs with 10.5.8 or newer that can connect?
Does connecting directly to the modem work via ethernet, or are you on dialup?

Windows 7 Bootcamp is no longer available in startup after updating to Yosemite 10.10

I updated my MacBook Pro (Retina, 15-inch, Late 2013) and then after updating I could no longer see my Windows 7 bootcamp when starting up. I followed this tutorial to try to get it too work again without losing any information: Windows 7 Removed after update Yosemite. I got to the part where we rebuild the MBR, but I got to part 8 and then it said that partition 4 is either too big or does not exist.
I do not know what to do from here and was wondering if I had done something wrong and/or what I can do to fix it?
Thanks in advance

You seem to have found the correct partition. The following table has your values. (ASC thinks I have invalid characters in my table, so this is a screen shot of the MS Excel spreadsheet).
Leave your Testdisk display and start a new Terminal Window. You need to use the following steps. If you see any error messages during the following steps, please stop and post back here with the error message. The following steps have values from your Testdisk output (and you can verify) in Steps 7 and 8.
Rebuild GPT4 using start/end offsets
Sudo gdisk /dev/rdisk0
P (print the full list of parts)
D (delete)
4 (part 4)
N (new part)
4   (part 4)
589682688 - Start offset in bytes (start point for Bootcamp part)
+387422201 - (Size offset as opposed to End offset)
0700     (Windows part type)
P           (print list of all parts just to see what changes will be made)
W         (Write the new GPT)
Y           (Yes! really write the new GPT)
This will delete and re-write the GPT partition info for /dev/disk0s4.
Rebuild MBR to match the new GPT information thus resetting the Hybrid MBR. Use defaults for other questions (like partition codes). The only values that need modifications are the Boot flags and step 6. Accept all other defaults that Gdisk offers.
Sudo gdisk /dev/disk0
P (Print list of parts)
R   (Recover)
H (chooses Hybrid)
Partitions numbers to be hybridized: 2 3 4
Y (Good for GRUB question)
N (part 2 boot flag)
N (part 3 boot flag)
Y (part 4 boot flag make NTFS bootable partition)
W (Write the new MBR)
Y    (Yes! write the new MBR)
Reboot
Here is a sample Q and A for the second set of Gdisk steps.
Place EFI GPT (0xEE) partition first in MBR (good for GRUB)? (Y/N): Y
Creating entry for GPT partition #2 (MBR partition #2)
Enter an MBR hex code (default AF): Press Enter/Return
Set the bootable flag? (Y/N): N
Creating entry for GPT partition #3 (MBR partition #3)
Enter an MBR hex code (default AB): Press Enter/Return
Set the bootable flag? (Y/N): N
Creating entry for GPT partition #4 (MBR partition #4)
Enter an MBR hex code (default 07): Press Enter/Return
Set the bootable flag? (Y/N): Y
Test 1 - Does Bootcamp Volume show up in Finder?
Test 2 - Can you see files in Bootcamp Volume?
Test 3 - Can you select Bootcamp in System Preferences -> Startup Disk?
Test 4 - If Test 3 is successful, select Bootcamp and Click Restart.

Noob Warning - Shared Computers No Longer Appear in Finder after Update

I recently (last Saturday) purchased a new MBP. I do a lot of photography and Photoshop work, and it was time to make the jump (especially with CS5 due out by the end of the month).
Prior to the 10.6.3 update, the other computers in my home workgroup all appeared under the Shared section of Finder. Now, after the 10.6.3 update, they're gone. The other computers are a laptop running Win7 Ultimate, another running Vista Ultimate, and a third running WinXP Pro. I sometimes need access to these in order to work on images or Word/Excel files.
Would appreciate any guidance as to how to get these computers back and appearing under Shared.

Ouch!... I'm seeing the same thing. Playlists that were seen prior to yesterdays update are no longer seen. Don't see any options to disable them so hopefully this will get fixed.
George Rachor

Wireless printing - from shipping sites - not working after update to iOS7

I am no longer able to print shipping labels from PayPal or USPS after updating to iOS7. I am able to print emails, etc. from other sites online - just not shipping labels. Is anyone else having the same problem? Is there a fix?

Tap Settings > General > Reset > Reset All Settings
Then restart the device.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
Then press and hold the Sleep/Wake button until the Apple logo appears.
Then try printing.

My ipod touch is no longer seen by itunes after upgrading to snow leopard

Just upgraded to snow leoprad and the device is no longer seen by itunes. My old ibook sees it but its itunes is not compatible. Please help...

Try here:
Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

IPhone 5s no longer holds battery charge after updating to 8.1.1

Immediately after updating to iOS 8.1.1, my iPhone 5s battery will no longer hold a charge. At 7:30 am (EST) it was 100% - by 10:30 am I had to plug it back in as it was down to 8%!! From 100% to 8% in 3 hours ...
I NEVER had a problem with my phone in any way before updating the software. PLEASE HELP! Thank You.

The same thing happened to me. However, I was 7 hours from home in the Baaken. I was in a situation that requred I keep the phone on for saftey reasons. My Iphone 5s died and is now a brick!
I just ordered my first Android phone. It's unfortunate that Apple post Steve Jobs doesn't perform adequate testing on software. They are becoming just "another" company!

3Gs no longer charges in car after updating to iOS 5

I got a weird problem after updating to iOS 5. In addition to the battery drain, my 3GS will no longer charge via a 12 volt car adaptor. I know the cable and the adaptor work because my son's iPod and wife's iPhone 3G both charge from them. The cable also has no problems charging my phone when it's plugged into the computer or a wall socket.
The battery drain is a bummer, but combined with no longer being able to charge in the car makes this a killer combination.
Any help with this would be much appreciated.
Regards,
John

You can try the standard fixes:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.
If still problem then the iOS broke full compatibility. you have to then wait for either Apple to fix the problem in an iOS update or for Honda to fix it via a firmware update/
Have you contacted Honda?

TS2634 My friends sd card reader no longer shows the pictures after updating to ios 7, is there a fix?

My friend has an ipad, and after updating to ios 7.0.2 the sd card reader that came with it no longer shows the pictures... just squares where the pictures would be. Is there a way to fix this?

@ Settings>iCloud
1. Icloud account being used
2. I see the following switches
>mail
>contacts
>reminders
>safari
>notes
>keychain (not a toggle switch)
>photos (not a toggle switch)
>find my iPhone
3. Storage & Backup
delete account option

Can not open Classic after updated to 10.3.9

Recently I have updated my iMac to 10.3.9. I can not open Classic 9.2.2 since then. I can start from 9.2.2, but the new printer I installed after the update is not compatible with 9.2.2. I really like to use APPLE WORKS. I can open APPLE WORKS when I start from 9.2.2, but I can not print it in 9.2.2. Can anybody help me?

Hi KTMO;
May I welcome you to the Apple Discussion Forums.
You are going to have to provide us with more details. We are not minder readers here.
Hardware - exactly what you running here; processor, RAM and disks?
Exactly how did you do the upgrade to 10.3.9?
Maybe if you provide these details we might be able to help you.
Allan

Mac not printing to Windows Epson Colorburst RIP after update

I know there are several other threads going about this, but Apple needs to get the message that this is their issue.
We have an Epson 4880 running off of the Epson Colorburst RIP on a Windows XP machine.
After the recent security update, our 10.5.2 Macs will no longer print to the RIP. It will not accept the authentication. All other Macs still print fine.
This authentication process is a joke on 10.5 and it or smb has obviously been broken by the latest update.
Has anyone figured out anything to get around this issue?
Others with the same problem make sure you let Apple know that they need to fix this and it is not the printer manufacturers problem.
g

See this thread
http://discussions.apple.com/thread.jspa?threadID=1466572&tstart=0
and please send feedback to Apple.

Kernel can no longer read usb devices after update

after running a Pacman -Syu yesterday which included a kernel update to kernel26-2.6.32.10-1-x86_64.pkg.tar.gz, i can no longer use any usb devices, my arch 64 laptop simply does not recognize them, anyone else have this problem?
when i attempt to downgrade... the kernel i simply get
[root@Arch aaron]# pacman -U kernel26-2.6.32.8-1-x86_64.pkg.tar.gz
loading package data...
error: 'kernel26-2.6.32.8-1-x86_64.pkg.tar.gz': cannot open package file
[root@Arch aaron]#
i can get you any outputs you need, i just need a solution to this quickly! i can't wait for the next update

ok it is definitey a gz file (or at least the kernel is... how do i check if the others are?
here is my pacman.log output
[2010-03-19 00:09] upgraded mysql-clients (5.1.44-1 -> 5.1.45-1)
[2010-03-19 00:09] upgraded mysql (5.1.44-1 -> 5.1.45-1)
[2010-03-19 00:09] upgraded amarok (2.2.2-4 -> 2.3.0-1)
[2010-03-19 00:09] upgraded apr (1.3.9-1 -> 1.4.2-1)
[2010-03-19 00:09] upgraded apr-util (1.3.9-3 -> 1.3.9-4)
[2010-03-19 00:09] upgraded x264 (20100207-2 -> 20100312-1)
[2010-03-19 00:09] upgraded ffmpeg (30526-1 -> 22511-1)
[2010-03-19 00:09] see http://wiki.archlinux.org/index.php/Openoffice
[2010-03-19 00:09] how to use extensions, e.g. for spell checking
[2010-03-19 00:09] see /usr/lib/go-openoffice/share/extension/install what
[2010-03-19 00:09] is shipped with this package
[2010-03-19 00:09] upgraded go-openoffice (3.2.0.6-1 -> 3.2.0.8-1)
[2010-03-19 00:09] upgraded gstreamer0.10-bad (0.10.18-1 -> 0.10.18-2)
[2010-03-19 00:09] installed soundtouch (1.5.0-1)
[2010-03-19 00:09] upgraded libdc1394 (2.1.0-1 -> 2.1.2-1)
[2010-03-19 00:09] upgraded gstreamer0.10-bad-plugins (0.10.18-1 -> 0.10.18-2)
[2010-03-19 00:09] upgraded gstreamer0.10-ffmpeg (0.10.9-1 -> 0.10.10-1)
[2010-03-19 00:09] upgraded gstreamer0.10-ugly (0.10.14-1 -> 0.10.14-2)
[2010-03-19 00:09] upgraded gstreamer0.10-ugly-plugins (0.10.14-1 -> 0.10.14-2)
[2010-03-19 00:09] upgraded kernel26-firmware (2.6.32.9-1 -> 2.6.32.10-1)
[2010-03-19 00:10] >>> Updating module dependencies. Please wait ...
[2010-03-19 00:10] >>> MKINITCPIO SETUP
[2010-03-19 00:10] >>> ----------------
[2010-03-19 00:10] >>> If you use LVM2, Encrypted root or software RAID,
[2010-03-19 00:10] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2010-03-19 00:10] >>> More information about mkinitcpio setup can be found here:
[2010-03-19 00:10] >>> More information about mkinitcpio setup can be found here:
[2010-03-19 00:10] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2010-03-19 00:10]
[2010-03-19 00:10] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2010-03-19 00:10] ==> Building image "default"
[2010-03-19 00:10] ==> Running command: /sbin/mkinitcpio -k 2.6.32-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2010-03-19 00:10] :: Begin build
[2010-03-19 00:10] :: Parsing hook [base]
[2010-03-19 00:10] :: Parsing hook [udev]
[2010-03-19 00:10] :: Parsing hook [autodetect]
[2010-03-19 00:10] :: Parsing hook [pata]
[2010-03-19 00:10] :: Parsing hook [scsi]
[2010-03-19 00:10] :: Parsing hook [sata]
[2010-03-19 00:10] :: Parsing hook [uresume]
[2010-03-19 00:10] :: Parsing hook [filesystems]
[2010-03-19 00:10] :: Generating module dependencies
[2010-03-19 00:10] :: Generating image '/boot/kernel26.img'...SUCCESS
[2010-03-19 00:10] ==> SUCCESS
[2010-03-19 00:10] ==> Building image "fallback"
[2010-03-19 00:10] ==> Running command: /sbin/mkinitcpio -k 2.6.32-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2010-03-19 00:10] :: Begin build
[2010-03-19 00:10] :: Parsing hook [base]
[2010-03-19 00:10] :: Parsing hook [udev]
[2010-03-19 00:10] :: Parsing hook [pata]
[2010-03-19 00:10] :: Parsing hook [scsi]
[2010-03-19 00:10] :: Parsing hook [sata]
[2010-03-19 00:10] :: Parsing hook [uresume]
[2010-03-19 00:10] :: Parsing hook [filesystems]
[2010-03-19 00:10] :: Generating module dependencies
[2010-03-19 00:10] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2010-03-19 00:10] ==> SUCCESS
[2010-03-19 00:10] upgraded kernel26 (2.6.32.9-1 -> 2.6.32.10-1)
[2010-03-19 00:11] upgraded kernel26-headers (2.6.32.9-1 -> 2.6.32.10-1)
[2010-03-19 00:11] upgraded libarchive (2.8.0-1 -> 2.8.3-1)
[2010-03-19 00:11] upgraded libass (0.9.8-1 -> 0.9.9-1)
[2010-03-19 00:11] upgraded liboil (0.3.16-1 -> 0.3.17-1)
[2010-03-19 00:11] warning: /etc/cron.daily/man-db installed as /etc/cron.daily/man-db.pacnew
[2010-03-19 00:11] upgraded man-db (2.5.6-1 -> 2.5.7-1)
[2010-03-19 00:11] upgraded man-pages (3.23-1 -> 3.24-1)
[2010-03-19 00:11] upgraded mplayer (30526-1 -> 30886-1)
[2010-03-19 00:11] upgraded mtools (4.0.12-1 -> 4.0.13-1)
[2010-03-19 00:11] upgraded mutagen (1.18-1 -> 1.19-1)
[2010-03-19 00:11] upgraded polkit (0.96-1 -> 0.96-2)
[2010-03-19 00:11] upgraded tzdata (2010b-1 -> 2010e-1)
[2010-03-19 00:11] upgraded unrar (3.9.9-1 -> 3.9.10-1)
[2010-03-19 00:11] upgraded vi (050325-2 -> 050325-3)
[2010-03-19 00:11] upgraded vlc (1.0.5-4 -> 1.0.5-5)
[2010-03-19 00:11] upgraded xorg-server (1.7.5.901-2 -> 1.7.5.902-1)
[2010-03-19 02:09] synchronizing package lists
[2010-03-19 02:11] synchronizing package lists
[2010-03-19 02:11] starting full system upgrade
[2010-03-19 02:12] upgraded smbclient (3.5.0-2 -> 3.5.1-1)
[2010-03-19 09:06] synchronizing package lists
[2010-03-19 09:06] starting full system upgrade
[2010-03-19 09:44] >>> Updating module dependencies. Please wait ...
[2010-03-19 09:44] >>> MKINITCPIO SETUP
[2010-03-19 09:44] >>> ----------------
[2010-03-19 09:44] >>> If you use LVM2, Encrypted root or software RAID,
[2010-03-19 09:44] >>> More information about mkinitcpio setup can be found here:
[2010-03-19 09:44] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2010-03-19 09:44]
[2010-03-19 09:44] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2010-03-19 09:44] ==> Building image "default"
[2010-03-19 09:44] ==> Running command: /sbin/mkinitcpio -k 2.6.32-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2010-03-19 09:44] :: Begin build
[2010-03-19 09:44] :: Parsing hook [base]
[2010-03-19 09:44] :: Parsing hook [udev]
[2010-03-19 09:44] :: Parsing hook [autodetect]
[2010-03-19 09:44] :: Parsing hook [pata]
[2010-03-19 09:44] :: Parsing hook [scsi]
[2010-03-19 09:44] :: Parsing hook [sata]
[2010-03-19 09:44] :: Parsing hook [uresume]
[2010-03-19 09:44] :: Parsing hook [filesystems]
[2010-03-19 09:44] :: Generating module dependencies
[2010-03-19 09:44] :: Generating image '/boot/kernel26.img'...SUCCESS
[2010-03-19 09:44] ==> SUCCESS
[2010-03-19 09:44] ==> Building image "fallback"
[2010-03-19 09:44] ==> Running command: /sbin/mkinitcpio -k 2.6.32-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2010-03-19 09:44] :: Begin build
[2010-03-19 09:44] :: Parsing hook [base]
[2010-03-19 09:44] :: Parsing hook [udev]
[2010-03-19 09:44] :: Parsing hook [pata]
[2010-03-19 09:44] :: Parsing hook [scsi]
[2010-03-19 09:45] :: Parsing hook [sata]
[2010-03-19 09:45] :: Parsing hook [uresume]
[2010-03-19 09:45] :: Parsing hook [filesystems]
[2010-03-19 09:45] :: Generating module dependencies
[2010-03-19 09:45] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2010-03-19 09:45] ==> SUCCESS
[2010-03-19 09:45] upgraded kernel26 (2.6.32.10-1 -> 2.6.32.8-1)
any ideas? i will try dowloading xz-utils!
EDIT: i definitley already had xz-utils...
ok i downgraded every package but to no avail.. the problem persists
i get this message from dmesg repeated over and over again:
hub 5-0:1.0: connect-debounce failed, port 2 disabled
hub 6-0:1.0: unable to enumerate USB device on port 2
hub 2-0:1.0: unable to enumerate USB device on port 1
i've googled it.. but no one seems to have a solution...
help?
Last edited by aaron.kilbride (2010-03-19 17:57:56)

Flash no longer working on Firefox after update

Moments ago I installed the Flash update after it came up on my screen asking to update, after doing so Flash is no longer working on Firefox, it works fine on other browsers. I cant view videos, look at flash objects etc. It was working perfectly fine before up untill the update. Anybody know how to resolve or fix this issue?

Dear Chris:
Yes, turning off Protected Mode indeed solves the problem!
Specifically, we today (June 9, 2012) installed the new Adobe Flash v. 11.3.300.257 on several Windows 7 PC's, all running Firefox v. 14 (Beta), and none of the Firefox installations would confirm that the installation was performed successfully. For example, the Adobe Flast test/about site, https://www.adobe.com/software/flash/about, would not work. And, likewise, YouTube videos and other Flash-encoded videos did not work either.
So, we tried your suggestion to disable the new Protected Mode, and it worked. That is, every single machine on which Flash did not work in Firefox now functions perfectly. So this conclusively demonstrates that there indeed is some kind of bug in the implementation of Protected Mode.
Can you please let me and the other Adobe users know when this is fixed. Thanks.
Also, could you likewise let us know the risks of turning of Protected Mode (although we really don't have any choice, as Flash will not work on Firefox with PM turned on).
Thank you. Much appreciated.
Kind regards,
Evan Katz
(formerly Contributing
Editor of Personal
Computing Magazine)

Cannot print to Canon iR-ADV C2020 after updated to Mavericks!!

Very bad user experience for OSX update. Found out cannot print anymore after I updated all 3 of my Macs....

Canon has posted the UFR2 v10.2.0 for OS X 10.9.
http://support-au.canon.com.au/contents/AU/EN/0100491502.html

Printer no longer seen in Classic after update

Similar Messages

Maybe you are looking for