Printer no longer works in the re-install of Leopard....

....here are some screenshots of the problem I suddenly ran into after a re-install of Leopard:
http://www.PictureTrail.com/gid22335136
I've tried everything that I can think of and still not able to print anything. The printer was operating fine prior to the re-install which was required due to not being able to start the computer one morning.
What I find especially baffling is the downloaded driver says 5.9 MB and a few minutes later the downloads window shows the same exact download as being 1.8 MB. Where did the 4.1 MB disappear to?????
I've tried 3 times with the exact same result each time: the above disappearing 4.1 MB and +"an error occurred while trying to add the selected printer"....."successful-ok-conflicting-attributes"+.
I suspect the problem to be a black hole that is swallowing most of the downloaded driver.....but why?????

Check....check....and check......times 3...at least.
Same old, same old. No printer in the list (system preferences) and when I try to add one I get the error message:
http://pic80.picturetrail.com/VOL826/449837/22335136/370445564.jpg
Downloaded, expanded and ran the installer at least 6 times now and keep ending up with the same error message.
BTW, as far as the Mac is concerned, the installation was completed successfully: http://pic80.picturetrail.com/VOL826/449837/22335136/370467696.jpg
Canon iP1800

Similar Messages

Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. the process ends with my mac saying the software is not currently available from the software update server.

Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. I've downloaded the driver software from Canon. My Mac dropbox tells me "the selected printer software is available from Apple", but when I click to download it, the process ends with my mac saying the software is not currently available from the software update server.

Open Finder and click on Go > Go to Folder. Then type
/Library/Printers/Canon
and press Enter. This will show the BJPrinter and iJScanner folders. You could try moving or trashing this folder and then installing the driver that you downloaded from Canon again.

LaserJet printer no longer works after installing Snow Leopard

Since installing Snow Leopard, my LaserJet printer no longer works. Spent 5 hours on the phone to Apple Support without any satisfaction. Any suggestions? I'm desperate.......

Go to the HP web site and download the latest drivers for your OfficeJet.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=3919449#N225

Just upgraded to Mavericks and my HP6100 printer no longer works, when I try to reload the software it says PowerPC apps no longer supported. Is there a way to use my HP6100 Printer with Mavericks?

Just upgraded my 2009 iMac (3.06 Ghz, core 2 duo $GB 1067 Mhz DDR3) to Mavericks OSX 10.9.5 and my HP6100 printer no longer works, when I try to reload the software it says PowerPC apps no longer supported. Printer says the software was improperly installed. Is there a way to use my HP6100 Printer with Mavericks or do I need to go back to Mountain Lion or Snow Leopard?

It's not clear whether your printer is included in the Apple list - there is an Officejet 6100 and a couple of other types. Go to the page linked to above and use the browser search for 6100.
I'm afraid HP are notorious for not supporting older printers - I had the same problem. Probably they hope you will buy another printer (I did, but it was a Canon). I did look on HP's site and couldn't see a driver - you could give it a try (make sure you have the exactly correct printer name):
http://www8.hp.com/uk/en/support-search.html?tab=1#/qryterm=HP6100&search_search type=s-002
Alternatively ou could try Gutenprint (open source software):
http://gimp-print.sourceforge.net/MacOSX.php
I found it would indeed drive the printer, but the colour dithering wasn't very satisfactory and the duplex printing bolt-on wouldn't work. However as Gutenprint is free it's worth trying to see if it's any good for you.

I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

There may be some security issues related to the USPS PDFs.
http://www.certified-mail-envelopes.com/signatures-usps-certified-mail-return-receipt-requested
I can't help with the scan/print problem. You seem to have done everything I would try.
I don't know if maybe using a registry cleaner would help.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Printing No Longer Working After Recent Upgrade

My printing suddenly stopped working after the latest upgrade (which upgraded the kernel from 2.6.15.2 to 2.6.15.4).
I discovered that arch is no longer auto-loading the parport_pc module. This is strange. If I run "hwdetect --show-modules", parport_pc is shown.
I do have MOD_AUTOLOAD="yes" in my rc.conf file.
The quick fix is to add "parport_pc" to the list of MODULES in rc.conf.
Are others having this problem?
Rob

I just read your post. I am sorry I could not join irc. I was actually at work. It is very hard for me to use irc at work. Firewalls make life difficult!
In any event, I think I solved the problem.
Please see http://bbs.archlinux.org/viewtopic.php?t=18747
Here is the complete post:
In my /etc/modprobe.conf file, there was the folloiwng line:
# Load lp support with parport_pc
install parport_pc modprobe -i parport_pc ; modprobe lp ; true
I believe that this line was in the original /etc/modprobe.conf file that came with arch 0.7. I don't remember ever adding it.
I commented out this line and I removed "parport_pc" from the list of MODULES to be loaded in /etc/rc.conf.
I rebooted and it worked. The modules lp, parport and parport_pc were all autoloaded at boot-up.
I should also note that right after the arch upgrade, I was experiencing CUPS daemon failure once and awhile at boot up. Somtimes cupsd loaded and sometimes it failed at boot up. Now it seems that cupsd loads reliably at every bootup. Problem solved!
The following are the remaining lines in my /etc/modprobe.conf:
# Load ppp-generic with modem drivers
install Intel536 modprobe -i Intel536 ; modprobe ppp-generic ; true
install Intel537 modprobe -i Intel537 ; modprobe ppp-generic ; true
install ltmodem modprobe -i ltmodem ; modprobe ppp-generic ; true
install ltserial modprobe -i ltserial ; modprobe ppp-generic ; true
install slamr modprobe -i slamr ; modprobe ppp-generic ; true
install slusb modprobe -i slusb ; modprobe ppp-generic ; true
# OSS Compatibility
#install snd-pcm modprobe -i snd-pcm ; modprobe snd-pcm-oss ; true
#install snd-seq modprobe -i snd-seq ; modprobe snd-seq-oss ; true
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.10 ---
alias snd-card-0 snd-opl3sa2
alias sound-slot-0 snd-opl3sa2
options snd-opl3sa2 fm_port=-1 midi_port=-1 port=0x538 wss_port=0x530
options isapnp=0 dma1=1 dma2=0 irq=5
# --- END: Generated by ALSACONF, do not edit. ---
The modem driver lines came with the original /etc/modprobe.conf file in arch 0.7.
Should I also comment them all out?
Perhaps I should only have the lines for my old ISA sound card in the /etc/modprobe.conf file. Please let me know.
Has there been a change in the kernel or udev which makes it neccesary to make all these changes in the /etc/modprobe.conf file?
Rob

Just upgraded to CS 4 and duplex printing no longer works

I'm trying to print a 2-sided document to an HP Laserjet 9500 from InDesign, and the duplexing no longer works. The printer still duplexes from my other Mac running CS2, so I'm wondering if something happened when I installed the upgrade.

I cannot get the dueplexing feature to work on our HP P2055 with InDesign CS3 & CS4 for the MAC.
HP P2055 Printer Driver from Snow Leopard.
From InDesign CS3 or CS4 (MAC) I send a two page Landscape document to duplex print. Only 8.5" from the left edge on both sides print. It's like it is only printing through a portrait mask.
Now if I make the document Portrait, then it prints fine.
The booklet printing is ever worse.
If I print with PCL instead of Postscript (Generic or the HP Postscript) the dueplexing works, but it prints the oppisite side flipped.
From a Windows Vista machine running CS2 everything works great.
On the MAC I can create a PDF from InDesign, open the PDF and duplex print the the same file fine.
On the MAC MS Word duplexes fine.
Anyone have insight on this InDesign/Printer issue?
24" iMac
Snow Leopard 10.6.1
Intel Core 2 Duo, 3.06 GHz
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz

What other hp print drivers will work with the officejet pro 8600

I have an Officejet Pro 8600 and like many others here, I am having a problem printing a custom size envelope (6x9). I did find that I can use the drivers for a deskjet 450 and setup my 8600 using those drivers. However, the 450 6x9 does not have a portait option in the layout.
My question is, what other hp print drivers will work in the 8600? I'm hoping one will have a 6x9 portrait layout?

Cheetah12 wrote:
Hello wingcheck,
Welcome to the HP Forums!
I understand you're receiving a problem printing a custom envelope size (6x9). You did state that you installed a Deskjet 450, but it doesn't come with a portrait option. I will do my best to assist you!
First, I need to find out your operating system on your computer? Windows or Mac?
If you have a Windows computer and using this Deskjet 450 driver, have you checked Devices and Printers on your computer to see if you have this portrait option:
1) Right click on the Deskjet 450, then click on Printer Preferences
2) Very top you should see a tab called "Finishing" and look for Orientation
3) You should see portrait, landscape, rotate by 180 degrees or mirror image.
4) Let me know if you don't have this option on this post
If not, then I would recommend installing a Deskjet 9800 to see if you have this option. Please follow this HP document on Installing an Alternate Print Driver in Windows 7 for a USB Cable Connection. When setting up this custom size, change the paper type to "Other Specialty Media". Please post your results, as I will be looking forward to hearing from you. Have a great night!
Hi Cheetah .... I don't have access to my printer at the moment due to travel, but here's what I have right now. My operating system is Windows 7 64. That's not much, but it is a start. I will have the additional information for you in a day or so. Something else I discovered in the user guide, which I didn't know, is that each tray will only handle specific media. So, when I print envelopes, I will have to use Tray 1 in order to do so.
Now I do have another question for you. Can I have installed, 2 different sets of print drivers at the same time without it causing a conflict? I'm assuming the diffenent driver will simply show up as a different printer in the listed printers, right?? Any way, thanks for your quick response, and upon arriving home, I will follow your previous suggestions. I will also keep you posted as to my success or failure.
Thanks
Paul

Checking out Pdf files to Local draft Folder option no longer works after office 2013 installed.

Checking out Pdf files to Local draft Folder option no longer works after office 2013 installed.
Summary :
We are using SharePoint 2010 Ent edition and users were able to checkout Pdf files similar to local drafts folder like any other office file without any problem when they used office 2010.
i.e
Unfortunately ever since their machines upgraded with office 2013 recently , this functionality completely stopped working for PDF files. This has now become a big problem for the users when it comes to check out and replace PDF files.
All browser plugins required for this functionality (i.e SharePoint OpenDocuments Class ) are all available and active. All document libraries are configured to Checkout is required for editing files. Browser version
used at the moment is IE9 (32 bit) version with windows 7.
Can anyone please help with this issue and any help to get away with this problem is much appreciated.

Hi,
Based on your description, my understanding is that the PDF files cannot be checked out to local drafts folder after Office 2013 is installed.
Did this issue occur with Office files?
I recommend to check if the Office files can be checked out to local drafts folder with Office 2013.
And it is recommended to use Office 2010 with SharePoint 2010 for best practice.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
Ron Bell
[email protected]

Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
I do not work for Mozilla but I do have experience of releasing software for public usage.
Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
You can go back to the old version of Firefox but that won't always solve your problem.
The web site below tells you how:
https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox

Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used (multi-tasking) list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

I bought pages ages ago using an iTunes account that no longer works as the email address has been closed down. How can I now update my Pages app, if it asks me to sign in using this now defunct email address?

I bought Pages ages ago using an iTunes account that no longer works as the email address has been closed down. How can I now update my Pages app, if it asks me to sign in using this now defunct email address?

All apps are always tied to the account from whaich they were purchased and will always have to be updated using that account.
Just because the e-mail account is shut down, has nothing to do with the itunes account. Why did you create a new account? Why not just change the e-mail associated with the old account?

I have updated to Mozilla 16.0.1 and yahoo toolbar 2.4.8.20120412011105. Search assist now no longer works on the toolbar. Enter key also will not work on toolb

I have updated to Mozilla 16.0.1 and yahoo toolbar 2.4.8.20120412011105. Search assist now no longer works on the toolbar, nor does the enter key. I've reinstalled both Mozilla and the yahoo toolbar. I've followed the instructions given in the customize toolbar section, but I am thinking that perhaps this toolbar just doesn't work with Mozilla?

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

Zap the PRAM and Reset the SMC, then try again.

HT201401 My bluetooth is no longer working in the car - it keeps 'searching' for devices

My bluetooth is no longer working in the car - it keeps 'searching' for devices. Anyone ever had this issue?
Thanks

Can you connect from your phone to another BT device, not the car? If you haven't ,I'd try a reset of the phone by holding the home and power button down. Next step would be to talk to your dealership and see if they have any ideas. Sometimes software can either get updated on iOS or on the vehicle and it can cause problems. Every dealership seems to have a go-to person that handles issues like this. Getting to know him or her well and getting their direct phone number will pay big dividends. A device restore might be necessary, but if it were me I'd talk to the dealership first.

Printer no longer works in the re-install of Leopard....

Similar Messages

Maybe you are looking for