Printer not accepting print commands

I have this laserjet printer M1213nf MFP which is not accepting print command. but its accepting ither commands of scanning and copying the documents. the serial no of the printer is [Personal Information Removed]. kindly revert back as soon as possible.
thanking you.

Hi , I read your post and see that you can scan and copy, but you are unable to print. I will certainly do my best to help you. Download and run the Print and Scan Doctor, it will diagnose the issue and might automatically resolve it. What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)How is the printer connected? (USB/Ethernet) If you appreciate my efforts, please click the 'Thumbs up' button below. If there is anything else I can help you with, just let me know. Thank You.

Similar Messages

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC??

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC?? Checked for software updates and are none. Talked with HP help and they say it's an Apple problem

I noticed that you said you uninstalled the printer, but you didn't mention resetting the print system. Resetting the print system will reset the drivers the Mac has installed and make them work like they should. Give this a try and see if it gets the printer working like it should. The document below will expalin more about doing this.
Basic Printer Troubleshooting Steps for Mac
If that doesn't help, see if you are using the AirPrint driver, or the printers driver. By default 10.8 uses the AirPrint driver if the printer supports it, so I'm betting that's the driver you're using. If it is, try using the driver for the printer itself. To do this, access Print and Scan. Click the + sign to add a new printer. Select the printer from the list. Click the dropdown next to Use and select the 7515's driver. Let me know what happens.
I am a printer tech for HP.

I recently replaced my dead airport router with a netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer and yet when I try to print wirelessly I get the message: "printer not connected; printer offline".

I recently replaced my dead airport router with a Netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer; yet when I try to print wirelessly I get the message: "printer not connected; printer offline". Lexmark support verified that my printer was connected to the new router and the problem was with the computer's printer configuration and they could reconfigure it online if I paid for their "Premium Support" services ($119 for one year, 3 fixes). I declined, feeling sure that this is something I could do if I knew how. Could it be an incompatability issue with OS 10.8.3?

You saved me $$$ that I can ill afford on my fixed income. I was very unhappy with the "support" from Lexmark... what a rip off! Thank you dwb!

I have iOS7 on my iPhone4. I turned on the Voice Over option and now my phone is not working at all. At first it was freezing and not accepting any commands. Now all I have is a blank sceen. I can't get back into it. Any ideas what happened here?

I have iOS7 on my iPhone4. I turned on the Voice Over option and now my phone is not working at all. At first it was freezing and not accepting any commands. Now all I have is a blank sceen. I can't get back into it. Any ideas what happened here?

Hi Jeffny01,
If your iPhone is not responding, you may find the following article helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Regards,
- Brenden

Logic does not accept key command of Play from a section. Shift Enter makes display flashing.

Logic does not accept key command of Play from a section. Shift Enter makes display flashing.
Another key command is normal.

Hi
If you are on a small keyboard (ie with no numbers pad) use FunctionShift Return
or If you are on a 'numbers keyboard', the Enter key is on the right next to the 3 key (and NOT the Return Key).
CCT

Computer crashes/hangs and does not accept any command?

why after opening Windows, computer crashes and does not accept any command?
only solution (compromise) which I found is to disconnect and reconnect the PC unit; Windows runs properly after the surgery to close it; next morning found the same problem...

Hello Liviu,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how after your computer loads Windows, it locks up or freezes, and I would be happy to assist you in this matter!
For further assistance, I will need to know:
The Product and Model Number of your desktop computer.
The version of Windows you have installed on your computer.
If your computer has completed all of its important Windows Updates.
If you have updated your HP drivers using the HP Support Assistant.
If this is an on-going, or recent issue.
If you have added any new software or hardware to your computer.
If the computer is plugged directly into a wall outlet.
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Printer not-accepting APP-FND-00500: AFPPRN received a return code of failu

Hi Gurus,
skgtag: not-accepting APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1.
This is my error. My same request output is printing to other printers. But it is not printing in particular printer.
My printer is shared is windows 2000 system and we have installed Unix files & printer sharing windows feature.
while executing below command from soloris command line
lp -d skctag -n 1 sona
skgtag: timed out error is coming please give advice in this.

Hi Hussein,
Now concurrent is completed normally without any warnings.
Server OS Level
Now it is not showing any error but printout not coming in printer.
lp -d skctag -n 1 /rman_backup/PROD_rmanfullbkp.sh
request id is skctag-60 (1 file(s))
But printout not coming ....
Concurrent Log file for your reference.
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 50089046
Number of copies : 1
Printer : skctag
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 07-JAN-2013 11:14:08
---------------------------------------------------------------------------

8600plus (OS X) will not accept print request from the registered add at hpconnect

HP 8600 plus OS X, will not accept a print request from the registered address at hpconnect but will print a request from the address that comes on the printer. I have tried to change the factory settings and i get a message from Hp connect that there is a printer error.

Hi Bill,
Bit of a strange error, I would recommend calling HP's team - they helped me out with my printer, and were very good:
HP Connected
ePrint
Instant Ink
Scheduled Delivery / Printable with automatic printing 855-785-2777 8am - 11pm EST Mon. - Fri.
10am - 6:30pm EST Sat.
U.S.: English (from link http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1)
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

Printer (not computer printer) for 10,000 piece 8 page brochure??

I have created this brochure in Pages. It is 8 pages 8X10 and I need a commercial printer. Having a little problem with my local printer because he has never worked with Pages and I do not see that as a problem for him in that I am sending him a .pdf file.
Open to all suggestions.
Thanks
John Melvin
Cactus Bill Productions

I do not see that as a problem for him in that I am sending him a .pdf file.
Well, use of the Portable Document Format in and of itself does not guarantee that the printing master is properly prepared.
For instance, you can have QuickTime movies and hyperlinks in a Portable Document Format pagination, but you definitely don't want to have that in your printing master.
You can have image resolutions that are too low for the intended printing condition, and you can have colour spaces that are incorrect for the intended printing condition.
"All my images are CMYK" - right, but what CMYK? CMYK is just a data format, to be precise, a four component / four channel data format. You may have all images in CMYK, but one image may have been converted for newsprint with a low paper white and a total ink limit of 240%, another may been converted for inkjet with a high paper white and 220% total ink limit, and yet another may have been converted for offset with a high paper white and 340% total ink limit. Further, the colours formed by the colourants in the CMYK images may be very, very different.
In other words, don't place pre-converted CMYK in your pages. Place original colour correct RGB colourants referenced to the physical or virtual device space in which the RGB capture was corrected (e.g. AdobeRGB, EktaSpaceRGB, PhotoGamutRGB etc.). Since a printing system cannot print three component RGB, it has to convert to four component CMYK.
The ICC printer profile for the intended CMYK four component printing condition defines the laydown order of the inks (which may not be CMYK), the total ink limit, the gray balance, the colour detail in shadows, and the colour detail in highlights. This is a very, very nicely engineered file of only 1.5Mb that does all the difference, if you use it right.
And this is where we come to the PDF/X filter in the ColorSync Utility. PDF/X is short for PDF for blind eXchange, that is, PDF/X is a rendering specification that eliminates what you should not have in your printing master, checks that what you do have in your printing master is reasonable, and saves out your printing master with the ICC printer profile of your choice as OutputIntent.
One thing, check that the PDF/X filter is set to 300 dpi, and check that you pick the right ICC profile for OutputIntent. The filter has no way of knowing what printing condition you intend, so ask your printer, and pick a profile for that printing condition from those available at www.eci.org. The reference measurements are on the home page of the International Color Consortium at www.color.org.
If you can't figure it out, post to the Apple ColorSync Users List. This is properly speaking the core community of the International Color Consortium, since the International Color Consortium was first called the ColorSync Consortium, and since the ICC Specification, now ISO 15076, is the file format of Apple ColorSync 2.0.
Hope this helps,
Henrik Holmegaard

Pages Intermittently Not Accepting Keyboard Commands

Battery on keyboard is 100%. No problems with keyboard on any other programs. Pages software downloaded today. Can still issue mouse commands. Intermittently Pages will stop accepting the commands from the keyboard. I cannot type any letters/words, delete key, return key, nothing functions. Then after 10-20 seconds or so I can type again. Any clues as to what could be causing this?

I don't have the hardware to test this, but I recall reading that some people had problems (I think they had Apple's Magic Mouse) where they left a finger lightly touching the "trackpad" area of the mouse which the computer interpreted as initiating a drag operation that took the focus away from the keyboard until they lifted the finger.
If you are trying to type with one hand on your mouse, you might want to check that.

CANON PRINTER 5400 - Printer not accepting INK REFILLS from Costco - saying Support 1600

Message says I should replace INK Tanks -
I just put in original - all refilled - ink cartridges that came with printer when I bought it at Costco only 6 months ago...
Costco did the refills...
Anyone know why I'm getting Support code 1600?? ...
"The ink may have run out
Replacing the ink tank is recommeneded"
How do I correct this situation?
I've done everything I can think of - rebooted the printer, downloaded new Canon printer driver software for the 5400...

Back up all data.
Triple-click anywhere in the line below to select it:
find L* -iname *MyImageGarden* -prune | open -f -a TextEdit
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot.

What causes printer not to print the black.

My printer will print all colors, excepts the black. It looks gray when printing photo's. I have cleaned the heads and it still does not print correct. What could cause this?

Hi,
Please try the following solution:
http://h30434.www3.hp.com/t5/Ink-Toner-Cartridge-Printhead-Issues/Photosmart-7520-black-not-printing...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to reverse print (not duplex print) on Deskjet 6500 E71n?

I am making t-shirt transfers. I need to reverse print, sometimes called mirror print, so that when the design is ironed on to a t-shirt it isn't reversed?

What operating system? For Windows 7 there is a Mirror Image checkbox in the Finishing tab.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printer not actually printing anything

Ok my printer is not printing anyhting on the paper. It was working one day and the next not. It pulls paper and sounds like its printing but all it does it pretend and spit out blank paper. I have tried unpluging from the computer and electricity and even removed device and reinstalled. Nothing I have tried has worked. Any suggestions.

Athanagild, I am sorry to hear you are having trouble, could you provide a little bit more information for the community? Knowing the model printer and operating system you are using could help narrow down troubleshooting. Other things like what application you are printing from and the steps you are using could be helpful as well.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

PDF Printer not in Printer Menue

The XI that came with my new dell E6540 , when I am in a program and chouse the print menue I do not have a PDF printer in the menu , is this just a tril ver. or is there
somthing I should do to get the drivers for it

The PDF printer is a component of Acrobat Professional, which, unless I'm sorely mistaken, DOES NOT come pre-installed on an OEM PC.

Printer not accepting print commands

Similar Messages

Maybe you are looking for