Printer not associating

I have a client with a printer that has a static IP and it is not associating with the WLC over FlexConnect. For Debug Client all I see is
*apfMsConnTask_0: Jan 27 12:21:07.757: Association request from the P2P Client Process P2P Ie and Upadte CB
*apfMsConnTask_5: Jan 27 12:26:28.364: Association request from the P2P Client Process P2P Ie and Upadte CB
Nothing else. The IP is in the same subnet as the AP is it associating to, the key and SSID is correct, but that is all I see come across.

Can you change the printer to be DHCP and do a reservation for it's IP in the scope?
passive client is not supported with FlexConnect:
http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080b3690b.shtml#anc12
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

Similar Messages

Hp 1510 printer not being detected by my windows Visa

I recently bought an Hp 1510 printer and after installing the software i tried connecting the printer with my laptop with windows vista(home version) as the operating software. However the printer does not even get detected after connecting it via the USB drive. The USB drive works fine when i use other external devices but cant seem to detect my printer. Please help...

I have been able to make some changes by reinstalling the software. As of now the Printer is being detected by my laptop(Windows vista OS), I can scan and can also print diagnostic information through the HP desktop 1510 series toolbox however i still cannot print word documents. Infact I can't seem to do any printing process. Whenever I try to take a print out a word document file the following error messages occur.
"Windows cannot print due to a problem in the current printer setup.
This error can appear if a default printer has not been designated or if the application is unable to locate an existing default printer. To correct this problem, try one of the following in Microsoft Windows:
If a printer is not available in the Print dialog box, add a printer.
If the application cannot find an existing printer that is already installed, set the printer as the default printer.
If a default printer is installed but the application is unable to use it, uninstall the printer driver, and then install the latest version of the printer driver.
If the printer is on a print server, make sure the printer is available, the network is functioning, the server is not stalled, the printer is not out of paper, or the printer is not suspended by the administrator. Printing issues associated with a network printer are best handled by your local network administrator".
It also shows an error that printer is not installed.
I'm perplexed by this issue. I have ensured that the printer is the default printer, I also updated the latest driver software, I can also scan which shows that the Operating system can clearly detect the printer, I can also print diagnostic info from the printer toolbox. The only think I can't do, it seems is Print. Please help me out. All the relevant info about the printer is given below. Thank you.
Model name: Deskjet 1510 All-in-One Printer series
Flimware Version: CGP1FN1307AR
Serial Number: {Personal Information Removed}
IK number: 509-20140126-0
Software version: 032.001.145.46951
Printer Driver Version: 11.21.00.1607
Installation IO: USB

Receiving printer not responding on computer screen. Unplugged, reinstalled wi-fi printer...nothing.

Cannot get printer to respond. One computer will print, the other gets printer not responding message.
We have reinstalled the printer, unplugged everything to no avail. Anybody have a solution?

Hi, Sora!
So that the Community can help you better, we will need to know exactly which operating systems are running on your computers, and which applications you're trying to print from. That, and any other details you'd like to give will help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

Hp 5535 will not scan, error message printer not found

I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
This question was solved.
View Solution.

Hi @prazdancr,
Welcome to the HP Forums!
I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
For further assistance I will need to know:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
Hope to hear from you soon, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

C309a printer not conecting wirelessly- printer's wireless wizard not finding router- rebecca

new comp. running windows 7. i've downloaded driver updates, cd for printer... HP diagnostic tool etc. turned every device off including router, modem, and rebooted. reset router to defaults. now for some reason printer not finding wireless router in NEW network name wheni run wireless wizard from printer. says no link on printer. on new comp says printer disconnected. diagnostic tool says incompatible with windows 7. have downloaded updates from HP as of december. wireless network test says fail under wireless working. all other comps in house can get on wireless internet. attempted to manually type in routers info... ip address etc... still says no link on printer. did the routerlogin.com for my netgear router thats 3 years old....for ip's etc...
i need to get the printer to find the wireless router!!!!!!

First, let's make sure the printer is OK. From the front of the printer: Setup > Network > Wireless Network Test. Does it pass all its tests?
Next, in the same Network menu, Reset Network Defaults.
Now, if all that goes well, from the same Network menu run Wireless Setup WIzard.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Installed a wireless canon Pixma MX432 printer back in November for use with my Mac Book Air. All was working normally until this past week when I began getting a message, "printer not connected." What is going on? Netgear Wireless N Router seems to be ok

My new canon Pixma MX432 printer is not printing. It was printing fine until about ten days ago. I use a Netgear Wireless N router, which is also new. What do I need to do. I get a message when trying to print that says "printer not connected." In addition, my old Gateway laptop will still print fine apparently because it has a cable connection to the printer. Puzzled!

Have you tried rebooting the router? I would unplug it, wait a few seconds, then plug it back in. Be sure you know the password etc. if that doesn't work, try unplugging and rebooting the printer. Good luck!

Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection

"[DBNETLIB] Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection"
After patches applied on patch Tuesday the database reports the above error.
All accounts are domain accounts and SQLServer uses Windows auth.
DCDIAG show no errors
All servers and DC have been restarted,
Message in db log confirms the connection is being denied due to trust.
Event log shows same rejection
Protocols enabled: named pipes, tcpip, memory
TESTS:
PortQry: "
TCP port 1433 (ms-sql-s service): LISTENING"
Connect with domain admin accounts works from multiple clients systems to DB.
Cannot connect with newly created domain admin account
Can connect if new admin account connect to server in terminal server session and uses UDL wizard or any other tool including isql.
New standard user also fails to connect.
NOTES:
I removed the SSL patch and the IE security update to see if that was an issue.
¯\_(ツ)_/¯

Has someone left the company or has an account of some nature been dropped/replaced?
Please click "Mark As Answer" if my post helped. Tony C.
Hi Tony,
Srry but No. We just installed the monthly updates.
I went back and found I had missed removing a patch. I missed the rollup for Windows Server 2003:
Event Type: Information
Event Source: NtServicePack
Event Category: None
Event ID: 4382
Date:  3/12/2015
Time:  12:26:04 PM
User:  NETTEST\admin
Computer: DATA1
Description:
Windows Server 2003 KB954920 was removed from your computer, and the previous Windows Server 2003 configuration was restored.
After I removed that is still didn't work but after about five minutes it started working.
I guess I ned to report that to MS after I research what might be changed to make the patch work.
Every time I get stuck and ask for help it seems to be just before I stumble on the solution.
Thanks for replying.
Well - maybe this will help someone else.
Thanks again for replying Tony
¯\_(ツ)_/¯

Since changing our computer I have been unable to download ebooks to my Reader Library I get a message Some file types associated with EPUB files are not associated with Reader Library; Waterstones suggest that I may have accidentally created a new Adobe

When I try to download them from the Waterstones website I get a message saying:
‘Some file types associated with EPUB files are not associated with Reader Library. Do you want to associate them now? When I reply yes I get another message; ‘Configuration error unable to update EPUB files check network firewall and try again’.
The ‘books’ are saved in the Download directory and I can’t transfer them from there to my E-Reader. I have not had any problems before, it was very simple; I saved the download and it automatically went into the Reader Library.
I contacted HP and they said it is a software error and suggested I contact Waterstones. I contacted Waterstones Customer Support and got the following response:
As the error message is specifically mentioning the firewall it does sound like something in the firewall settings is stopping the download from taking place correctly. However, the files should not be being saved to the Download folder. It would be worth trying again by going to your Digital Order History on your Waterstones.com account and pressing the download button, and then making sure to press "Open" not "Save". When you press Open rather than Save it should give the option to open the file with Adobe Digital Editions. If the firewall message still comes up then I'm afraid something is blocking it on your end.
If the above "Open" download method works but you then still get an error message it could possibly be that you have accidentally created a new Adobe ID when setting up on the new computer, rather than signing in with your old Adobe ID. It would be worth trying the aforementioned download technique again first, but if problems did still persist it would be worth calling Adobe themselves on 0207 365 0735, as they should be able to sort out any account issue.
In response to the first para of Waterstones email I already do what they suggest I do press ‘Open’ not ‘Save’ but I don’t get the open with Adobe Digital Editions (we have installed Adobe Digital Editions on the new computer. Waterstones say we may have ‘accidentally created a new Adobe ID when setting up the new computer’ does that mean that we shouldn’t have installed Adobe Digital Editions on the new computer as it would have already been there? How do I sign in with my old Adobe ID?

Hi all after attampting to get some supoport from adobe by phone.... nice people infurating policys as far as support for digital editions or DRM is conserned... However I got no where with support.
I ended up instaling Digital editions on my desktop PC and going through the motions of registering and borrowing a book then returning it. Then I trying on my iPad, Bluefire worked, Over drive did not so I completely removed Overdrive and reinstalled and re registered. all working now.
Maybe some one at adobe did something. Maybe the install of the adobe DE client on a PC corrected what ever was out of wack with my account. Mayby the server that my account lives on did a scan disk and corrected a bad clustrer.
What ever happend My account is actiove and working again. hope this helps others.

When I try to print from web page I get "printer not activated - error code 30", but I can copy text into Word document & printer works.

I am unable to print anything from an internet web page. I continually get "printer not activated, error code- 30" followed by "An unknown error occurred while printing". I can copy the material from the web page, place into a Word document and then print. This just started yesterday and I have no idea why. Would appreciate your advice!

See this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page]

When I try to print from web page I get "printer not activated - error code 30", printer works on Internet Explorer

When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.

What does that error message say?
See this: http://kb.mozillazine.org/Problems_printing_web_pages

HT5637 My Ipod Touch 4 with IOS 6.1.5 (new to me) is not associating all my albums with the artists. All the music is there, it's just not in the right place. Can you help an Apple novice?

I'm new to this so please forgive me if I'm not using the correct terms. My ITunes version is 11.1.3.8. For years I had an IPod Classic and it worked perfectly with all my music where I wanted it. Unfortunately, it was recently stolen. I bought a used/wiped clean 64GB IPod Touch 4 loaded with iOS 6.1.5. I've tried to load my music twice and both times I'm getting the same odd results While everything is properly associated in ITunes once I load and sync the IPod Touch there are several albums that are not associated with the Artist. I'll explain further. I prefer to sort my ITunes library and IPod by Artist. So when I pull up some (not all) Artists on my IPod Touch some Albums that should be there are missing. I say they are missing, they are there. The total song count on ITunes matches that on the IPod Touch and if I sort by Album name, I can find the album that does not appear when I sort by Artist. The reason I want to fix this issue is I appreciate a wide variety of music and I can envision me looking for an artist and not finding them and not being able to remember the name of the album. The Rolling Stones are easy and I know how many albums they have an how many I have. Smaller groups that may have only one album are more problematic. Unless I randomly come accross the song I might never be able to find it or listen to it. I know lots of people have more music than I do so I'm not bragging, but my library has 414 different artists spread across 1402 albums and I can't always remember what I own. Speaking of owning, I own the physical CDs for the vast majority of my music so I don't think it's a situation of previously ripped music not showing up or not being formatted correctly. Any help would be appreciated.

Hey there jcgoutcher!
I believe your iPod may be set to group albums by album artist, which is a setting that can be turned off in your music settings. I will provide a link below that can help illustrate where to find this setting:
Music settings - iPhone
http://help.apple.com/iphone/7/#/iphf2d8534c
While the article in the link above is written for the iPhone, the setting will be found in the same place on your iPod touch. Thanks for using the Apple Support Communities!
Cheers,
Braden

I recently replaced my dead airport router with a netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer and yet when I try to print wirelessly I get the message: "printer not connected; printer offline".

I recently replaced my dead airport router with a Netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer; yet when I try to print wirelessly I get the message: "printer not connected; printer offline". Lexmark support verified that my printer was connected to the new router and the problem was with the computer's printer configuration and they could reconfigure it online if I paid for their "Premium Support" services ($119 for one year, 3 fixes). I declined, feeling sure that this is something I could do if I knew how. Could it be an incompatability issue with OS 10.8.3?

You saved me $$$ that I can ill afford on my fixed income. I was very unhappy with the "support" from Lexmark... what a rip off! Thank you dwb!

A while back I made a gamecenter account that was not associated with an Apple ID, it was with my email, now my gamecenter account IS my Apple ID. I want to delete it and make a new one, but i can't figure out how. Help!

A while back I made a gamecenter account that was not associated with an Apple ID, it was with my email, now my gamecenter account IS my Apple ID. I want to delete it and make a new one, but i can't figure out how. Help!

Since you can't delete Apple IDs and having multiple Apple IDs can cause confusion, what you may want to do is rename your existing Apple ID to the new email (desired Apple ID). That would in effect do what you want, get rid of the old and give you the new.
See "Apple ID: Changing your Apple ID"
ivan

App store update shows I can't update an app since my Apple ID is not associated with my account on Yosemite

App store update shows I can't update an app since my Apple ID is not associated with my account on Yosemite. How can I just force it to allow me to RE-BUY the app again since I don't even have it to update, but I want it?
Currently, I even though I don't have the app, I am not given the option to buy, only to "update", and when I click on that it either hangs or it complains that it can't since my Apple ID is not associated with my account.

And it was your wife's Apple ID that was used to download and install the Yosemite you are using on this computer? If so then I suggest you need to contact Apple to get his straightened out.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.

Printer not printing AND Matching Screen colors to Print colors. Any advice is apreciated!!

Hello - I have 2 questions regarding printing to an Epson and also regarding the monitor colors Not matching the print colors working from Photoshop CS4 on a Mac with a Maverick [ 10.9.3 ] OS. My issues are Not about my own printers or software. I have been tutoring a friend via phone in Photoshop; he has CS4 and is working on Mac OS 10.9.3.
1- We found that he could print nearly fine [ nearly accurate colors ] from Lightroom on his computer, version 5.4. But when he tries to print from Photoshop he cannot make a print. There is clear communication between the computer and the printer, as, when he sent the file to print, the printer [ an Epson 3880 ] responded by automatically changing to Photo Black from Matte. Then, it opens the rollers as if to print, but, it them stops and the menu [ on the Printer ] says 'Ready.' The paper is 4x6” Moab Lasal paper 300gsm. This issue of Not printing is only with this Moab Lasal luster paper, for which he Does have the IIC profile, and we always make sure ‘Photoshop manages colors,’ not the printer. To address the issue of the printer Not printing at all using a non-Epson brand paper, we have tried seemingly everything from deleting and re-adding the printer from the Library / Printers, resetting everything [ printer computer software etc ], trying different settings in the Printer window and the Print Settings window. Including changing the media profile, platen gap, etc.
2- My other and more important question is – after we Do get a print, we cannot match the monitor color to the print. [ We havE been able to get a print using Epson brand paper. Which is odd because we have the ICC profiles for both papers ]. To address the color matching issue, he has told me he calibrated the monitor with a Spyder, and here are a few other variables that I can relay that may or may not be affecting his color-issues:
He iS viewing his prints in a dayliglht-rated lighting environment
The monitor is an iMac glossy finish monitor, not an anti-glare
We tried working and printing from both an 8-bit and also a 16-bit color-space and also 16-bit printing
The color shift is slightly but noticeably toward Magenta.
His printer is Not calibrated
Please let me know what else we can do, any known glitches that may be an issue with his older version of CS, any tips you can suggest.
Thanks very much!

I don't have that printer and I'm not on Mac, so someone else has to step in there. Generally a green/magenta cast indicates none/double printer color management. But then I don't know what you mean by "slight".
The Spyders aren't the most consistent and reliable calibrators out there. I had a Spyder 3 sensor that I just threw away because it gave a distinct red cast (I have several other calibrators, so there was no doubt). Another potential problem is that with most calibrators you can only adjust the white point along the blue/yellow Kelvin scale, but not on the green/magenta scale. This is often necessary to get a good white point color. In this case you need to use the monitor's OSD controls, and if possible the "pre-calibration" function in the calibrator to measure and monitor it - if that function exists. And I don't know if this is possible with an iMac.
This is basically a question of getting the white point right, both on the blue/yellow and the green/magenta axis (and luminance of course). The goal is to get a visual match to paper white on screen. With the white point properly set, neutral color balance relates to that, and the rest more or less follows by itself. (In addition you should set the proper black point/contrast for full control, but that's not the issue here).

Printer not associating

Similar Messages

Maybe you are looking for