"printer not connected" error over a wifi network

I have a HP CP2025N laser printer that has been happily working on my Apple network. Now all of a sudden I keep getting a "printer not connected" error.
I reset the network to no avail.
I am running Lion, the printer is connected via an ethernet cable on a Apple Express routter that extends an apple extreme. Again this configuration has been running for two years now.
Any help would be appreciated.

If the printer works with AirPrint, you don't need the EPSON software and you should remove it. Then see below:
OS X Yosemite: Reset the printing system

Similar Messages

  • Canon ImagePROGRAF 6350 PRINTER NOT CONNECTED ERROR

    My Canon ImagePROGRAF 6350 is connected via USB to my iMac; however, I am still getting a PRINTER NOT CONNECTED ERROR. How do I fix this?

    We updated two computers on our network to 10.6.8 (from 10.5) and another (PPC iMac) to 10.5 (from 10.4). In each case, I had to first remove the printer from Print/Fax, then reinstall from the original CD, and then update to latest drivers, and then the printer worked fine. This was for a Canon 8210 Print and Scan multifunction device, so I was inferring that Canon drivers/software need to be reinstalled when updating to later versions of the OS. Hence my recommendation. The Canon website shows drivers for your device for both 10.6 and 10.7, so it appears to be usable under the latest Mac OS. It seems that if you can start from as close to "scatch" as you can and then reinstall (much as if you got the printer brand new), you have a better chance. This might involve "uninstalling" by hand if need be, to remove vestiges of the previously installed stuff.

  • My iPhone 4s will not connect with my home WiFi network. I have ios6 on my phone. I have updated my IMac and my MacBook Pro with iOS 10.8.2. Anyone have any suggestions? It was connecting with no problems prior to updating my two computers.

    My iPhone 4s will not connect with my home WiFi network. I have ios6 on my iPhone. The connection was working perfectly before I updated my IMac and my MacBook Pro to ios 10.8.2. I have had ios6 since I purchased the phone a couple of months ago. It searches for a network and finds them, but when it asks for my password, it will not accept the password. Have never had this happen before.

    Hello krosebear,
    Thank you for using Apple Support Communities. 
    If you are having difficulties connecting your iPhone to a Wi-Fi network, the following article should provide troubleshooting that should help you resolve the issue. 
    If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
    Regards,
    Jeff D. 

  • I have just updated the i06 software for my ipad and it will not connect to my home wifi network - all my other devices are able to connect - i have tried all troubleshooting options and none have worked - please help

    I have just updated the i06 software for my iPad and it will not connect to my home wifi network - all my other devices are able to connect to my wifi network.
    I have attempted all troubleshooting actions suggested and nothing has worked. I have restored my iPad network and factory settings - Please help - this is frustrating me

    you have to set up your router to solve th problem. first find and write down the ipad mac address.
    then log on to your router using your laptop or any device that can connect to router at 192.168.0.1 in your web browser. please check out my posting about how to resolve the wifi connection problem.
    i think the ios6 update has reset the networking but if you set up the router then you should not have the same problem any more.

  • Printer not connected error in 10.10.3

    I'm getting "Printer not connected" now since I've upgraded to 10.10.3 on my Epson WF-3540 on my MBPr. My two other Macs are not having this issue, one of which is also 10.10.3 and the other 10.10.2 (a MacPro and MBP respectfully).
    I have tried the following on my MBPr:
    Delete Jobs
    Pause and restart queue
    Restarting Mac
    Restarting Printer
    Resetting Printer
    Delete and reinstall printer - Both via AirPrint and Epson drivers
    Reinstall fresh downloaded drivers
    Repeat 6 with new driver install
    SMC and PRRAM reset
    Printer can be seen easily in printer control panel for setup. Setup proceeds normally. Then when attempting to print, the queue displays "Printer not connected" error.

    If the printer works with AirPrint, you don't need the EPSON software and you should remove it. Then see below:
    OS X Yosemite: Reset the printing system

  • Face time will not connect error message "Please check network conections and Try again" message appears but I'm connected to the internet?

    Face time will not connect error message "Please check network conections and Try again" message appears but I'm connected to the internet?

    Hey sergioo9,
    Thanks for the question. Based on what you stated, it seems like you are having trouble signing into Messages on OSX. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    FaceTime, Game Center, Messages: Troubleshooting sign in issues - Apple Support
    Thanks for using Apple Support Communities.
    Cheers,
    Mario

  • My iphone5(ios 8.1) is not connecting to my home wifi network but connects to office wifi. This problem is only after updating 8.1

    My iphone5(ios 8.1) is not connecting to my home wifi network but connects to office wifi. This problem is only after updating 8.1I have already done "Reset Network many times. I have switched off and on my router multiple times. No luck.

    Hi vpraghu,
    If you are having an issue with connecting to a Wi-Fi network with your iPhone, I would suggest that you troubleshoot using the steps in this article - 
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • IPad will not connect to any other wifi network besides iPhone hotspot.

    I have 3 iPads and until recently they all worked flawlessly using a mediocre wifi signal. One of them now will only work with my iPhone hotspot and will not connect to any other wifi network. I have rest it removed the cover and it still does not work. Please advise.
    Thanks

    Try this Method:
    Go to Settings > General > Reset > Reset Network Settings (NO DATA WILL BE DELETED)
    Reconfirm it again when the notification pops up and wait for the phone to reboot itself

  • Wifi printing after Mountain Lion upgrade, "printer not connected" error

    I have Canon MP610 printer.  Was getting error message "Looking for printer" or "Printer not connected" after upgrading to Mountain Lion 10.8.  Printing works fine when I directly plug in USB cord to MacBook Pro to print. However, on the wifi network, no luck.  Today I have upgraded Canon's latest driver, reset the printer system, deleted printers from system icon in System Preferences, added new printer back in..... Nothing.
    I have reset Time Capsule, where my printer USB is currently plugged into.
    Nothing.
    Please advise what to try next...??

    AirPort Utility 5.6 is available at AirPort Service and Support.
    5.6 doesn't work with Mountain Lion, so am I stuck?
    I already had AirPort Utility 5.6 on a Lion machine and upgraded to Mountain Lion with no issues. AirPort Utiliy 5.6 works fine as does AirPort Utility 6.1.
    But, I did not try to download and install AirPort Utility 5.6 since it was already on the Mac.
    Please try again and report on your results.
    AirPort Utility 5.6 for Mac OS X Lion

  • My ipad2 cannot find my HP A3050 j661b airprint printer although the printer is connected with the same wifi network.Software updates are current on all and my other labtops also work properly with this printer in the same network.Further more it used to

    My Ipad 2 cant find my HP3050A j661b airprint printer although the printer is connected to the same wireless network and software updates are current on all and my other laptops also work properly with this printer.further more it used to work with my IPAD2 before when I used the old wireless router but now I changed it to HAUWEI HG231f but I set everything in the same way it was. Thanks in advance.

    When you change to the new router, did you re-run the CD to re-set the new SSID and password to the printer.
    Otherwise your iPad will not be able "talk" to your printer.

  • My ipad 4 does not connect with my home wifi network

    my ipad 4 does not connect with my home wifi network

    Try this:
    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • How do I resolve a "printer not connected" error message?

    Dear Mac Community,
    For the better part of a year I have printed flawlessly to my HP Color LaserJet CP4020 on my home wireless network. Recently I upgraded to OS X 10.8.4 and now when I print, the queue stalls and I receive the following error message, "The printer is not connected."
    Here is what I have tried so far to resolve the issue but to no avail:
    Downloaded and installed the latest HP firmware and software drivers
    Deleted the printer and added it again in Preferences>Print & Scan
    And, of course, the above noted bullet point is the rub: If the printer were not connected to my wireless network then it would be unable to be added! But since I can add the printer, my OS is definitely seeing the printer on the network.
    After the above diagnostics I tried printing from native Mac OS apps (e.g. TextEdit) and non-native apps (e.g. Microsoft Word), and both worked.
    Then they stopped.
    Then they would print after several minutes of delay (e.g. a single sentence Text Edit test print page took over a minute and a five sentence Word document took over 5 minutes).
    Then they stopped.
    And now I cannot print anything!
    In case it helps, my specifications are as follows:
    MacBook Pro running OS X 10.8.4 with 8 GB RAM, 500 GB HD, 75 GB available HD space
    HP Color LaserJet CP4020, Firmware v.20120112 07 .111.0, Software Driver v. 9.4
    Any help anyone could provide would be GREATLY appreciated.
    Sincerely,
    Randy

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select "/var/log/cups/error_log" from the file list on the left side of the Console window. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the time of the last failed printing attempt. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.

  • My Ipod is not connecting to a familiar wifi networked that I have been using for the past three years

    Yesterday I went to move my router to another location in my house. This ended up not working for one reason or another so I moved it back. Now it isn't connecting to the wifi. When I go to select a wifi network it shows up, but when I select it, it just shows the loading sign next to it. All my families other devices are connected to it fine, but not mine. I have restarted the ipod muliple times, forgotten the network and even restarted the network multiple times. Any help would be greatly appreciated.
    Side note: I went out today and it connected perfectly fine to another previously known wifi adress.

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • New Ipad mini will not connect automatically to home WiFi network

    I use a range of Apple devices at home, IPhone 4, MacBook Pro and IMAC.
    They all see and connect automatically to my WiFi home network. I never experienced any difficulty with my DLINK router.
    I have received a couple of days ago my new Ipad mini (Wifi+ cellullar), running IOS 602, but not equipped with a SIM card.
    The device never connects automatically to the home WiFi network.
    I need to open the Settings app, chose the WiFi submenu and select manually my "dlink" network. Then only can I work with my network.
    I need to perform this each time I leave my home or I restart the device.
    As I am experienced with Apple devices I noticed this behaviour right away and can confirm that the settings on the Ipad mini are the same as the ones of the IPhone 4. I am certain that this is a bug.
    Any suggestion to overcome this major frustration?
    Patrick

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Printer Not Connected error with HP Wireless Printer

    Hi everyone,
    Just bought an iMac, first time ever using OSX and trying to add my new HP 2540 wireless printer. I've spent 4 hours on this so far and now looking for help!
    I've followed every instruction to the letter - the wireless connection with the printer is fine as I printed off a report, it will print connected via a cable and it recognises my printer in applications and I have done the set up via disc about 20 times uninstallig each time and starting from scratch again. I've downloaded the latest driver from HP.  All I get is a 'printer is not connected/printing looking for printer' endless bar when I click 'print'. It seems to be an issue of it not recogising it over the wireless connection despite it being connected to my router.
    What am I doing wrong? How do I fix this?
    Many Thanks!

    Connecting a printer is pretty simple if you follow Apple's process, ignore HP's guides!!
    You can find Apple's instructions by clicking Mac Basics: Printing in OS X
    In the event you still have trouble give AppleCare a phone call, you have 90 days of free telephone support and Apple can help resolve most issues. If you don't know the phone number in your area please click Contact Apple for support and service to locate it.
    Good luck and welcome to the light side.

Maybe you are looking for

  • Schedule lines in SA

    Hi I am able to release the schedule lines in ME84.But still when I go in MIGO the message displayed is document contains no selectable items. Is there any step remaining? Regards

  • How Do You "Move" Items/Applications from the Mac Hard Drive?

    Hi, As the subject line suggests I need to "move" things from my regular Mac Hard Drive to the additional Hard Drive I installed. My normal (forgive my lack of technical talk) hard drive is almost full. I would like to move things like iTunes, iPhoto

  • A serious question  ,could someone help me please just a little problem

    this is a program to let me open a file and read birthday and related name, and then type name we can fetch the birthday, everything is ok ,whenever i input a name, it always find nothing, can some experts help me please there are three class i defin

  • How do I transfer library from my old ipod to new one?

    Hi I was given a new ipod nano for christmas which I have registered but I can not work out how to transfer the library from my old nano to my new nano. I have a new laptop which doesnt have all the original files on so wonder if it is even possible?

  • Large file read in, system out error!

    the following method simply reads 6MB text file by each line. After reading a line, separate the line with '\t', and obtain 2 tokens. After getting 2 tokens, synthesis the 2 tokens into another string token. Sythesized token is displayed with System.