Printer not recognised on network via Airport Express

I have recently purchased a Canon MP630 and installed all the drivers etc onto my Mac. I can print from it easily from my Mac via a USB connection. However, Im hoping to connect it to my Airport Express via the USB. I have done that, but the printer isnt being recognised and I cant print.
Can someone explain what to do, to fix this problem.
Thanks

HP Jetdirect is what Apple calls IP printing to port 9100. It's a standard protocol which your printer supports. We often recommend it because it uses a specific port (9100) rather than using a queue name. Using a device-specific queue name is required in the "standards" documents for LPR and IPP (yes I realize OS X claims that a blank gives a default queue name).
In short - try it.

Similar Messages

  • Trouble printing to Epson Workforce 435 via airport express network

    We have an Epson Workforce 435 printer that connects wirelessly to our home network via Airport Express.  After we switched to AT&T, we could no longer print from our Windows 7 PC connected to the network via Airport as well.  Our Macbook air works just fine.  The printer's network status sheet says it is connected, but it's like our computer can't find it on the network.  Can't ping the printer's IP address either. 

    Okay, I have checked the settings on the AX - it is set up to be 802.11b/g compatible, so that doesn't appear to be the problem.
    I had a friend come over with her macbook - she was able to detect the wireless network, but wasn't able to connect to it, even when I gave her the password. Does this help diagnose the problem?
    Here is additional information about how the AX is currently configured:
    In the Airport tab in AirPort Utility:
    Wireless Mode: Create a wireless network
    Radio Mode: 802.11b (802.11b/g compatible)
    Channel: 1
    Wireless security: WEP
    MAC Address Access Control: Not Enabled
    In the Internet tab in Airport Utility:
    Connect using: Ethernet
    Configure IPv4: Using DHCP
    Ethernet WAN port: Automatic
    Connection sharing: Off (Bridge mode)
    I have tried turning wireless security off, but that didn't help the problem. I have also tried turning MAC Address Access Control to Timed Access, inputted the MAC address of the printer, and gave it permission to access the network all day, everyday, but this didn't work either. I have looked at changing the connection sharing settings, but I don't really understand what I'm doing here, so I am reluctant to mess with things much. This seems like the most promising potential solution?
    Thanks!

  • Trying to get my Viera TX-P42S30B hooked up to me home network via Airport express with no luck.

    Trying to get my Viera TX-P42S30B hooked up to my home network via Airport express with no luck.
    Have tried both wired (network cable) and wireless to no avail, can't find much info online, any help appreciated !
    Airport utility 5.5.3
    Airport Extreme 802.11n
    Airport Express 802.11g

    The problem is that the AirPort Express (AX) is creating a subnet.
    To prevent that, configure the AX to act as a bridge (so that it is NOT sharing a single IP address).

  • I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?

    I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?

    Tell us more about the problem, I can think up 100&1 different reasons, but don't have time to go through all the possibilities. So.. what happens?

  • Unable to print to my Oki C3200 via Airport Express

    Hi
    I wish to print wirelessly via Airport Express using my Oki C3200 printer. I have followed all the recommended install procedures.
    I am using a Windows Vista Home Premium 32 bit PC, have configured the printer with Bonjour for Windows, and still cannot print.
    The printer works fine if connected by USB direct to the PC.
    Any help appreciated.

    Yes, my iMac is hooked to my Airport Extreme through it's ethernet port.
    No, I don't have AIM.

  • Printer not working with Leopard and Airport Express

    Hello!
    I have seen that this is a common problem but I've tried several solutions that seemed to work for others but still not for me.
    I have a Macbook Pro unibody and airport express with OS X 10.5.6. I used a Samsung CLP-300 wirelessly though my airport express (with Tiger on my older macbook). The printer works fine when it is plugged into my USB on the Macbook but not on the airport.
    Here is what I've tried in the past 8 months:
    - update the Samsung printer driver
    - used "fixairport"
    - configured HP IP with airport local address
    - spent 2 hours on the phone with apple
    None of this seemed to work. The printer will print the first page and then any subsequent pages it gives me an error host message.
    If anyone can give me an idea of what did work for them in this situation, or maybe I'm doing something wrong, please let me know. It would be greatly appreciated.
    Steph

    kelscan, Welcome to the discussion area!
    You need to reconfigure your AirPort Express (AX) so that it joins the wireless network provided by the "modem". Follow the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

  • Connecting to existing home network via Airport Express

    I had my Macbook Pro connected to our home router which allowed me access to our home network and the internet. On this network we had connected both my MBP and my flatmates PC (which is connected directly to the router via network cable).
    Through this configuration i was able to both access the internet AND access files on the PC. I have recently purchased and airport express to eliminate the need for the network cord. Since setting up the AE i have been able to connect to the internet no problem by creating a wireless network and using all the automatic settings, however in the process i have lost my ability to connect to the home network and my flatmates computer. In fact, under "networks" in finder the home network has disappeared. Also in network prefences i am getting a warning saying "The cable for Ethernet is not plugged in".
    Is anyone able to tell me what im doing wrong?
    thanks ....
    Message was edited by: seysearles

    The problem is that the AirPort Express (AX) is creating a subnet.
    To prevent that, configure the AX to act as a bridge (so that it is NOT sharing a single IP address).

  • HP printer not printing via Airport Express

    I have a HP DeskJet D2330 printer that I am trying to use via Airport Express. The issue is that while the printer is detected in the Airport Utility, and is detected in System Preferences as a Bonjour printer, I can't print to it. Documents sent to the printer appear in the queue and then disappear but no pages come out of the printer.

    Hi - similar problem. Mine talked a little (test page would print about ~1 inch then grind to halt). No luck with escalated apple network tech. Problem (apple sez) is with HP. HP is quiet but has list of printers "likely" to work with Airport Extreme , but dated (indicates rendezvous with extreme vice bonjour). FYI, my printer works fine when USB direct to mac. Also Works fine from Mac or PC as ethernet-connected printer on home network (with Linksys/N Giga router) as network printer (also sets up as "bonjour" printer for what that is worth). Also problem exists with imac connected to Airport extreme via wireless or wired. So...problem seems to be pretty specific to talking via airport extreme USB. Havent tried to use ethernet yet, but need the slot for other equip.
    Anyone else having any luck?
    Also anyone have proven good printer hookup? I need photo quality printer.
    mpw

  • Airport not recognising my network.

    Hi. I have had a peculiar problem for the last few days: Airport is not recognising my network so I can't get online via wifi. When I plug in the LAN, then I get the connection right away. Airport (Extreme) recognises other networks so it's not that it has stopped functioning and my wife (who uses the Windows O/S) connects via wifi through our network. I have tried shutting down everything and startng up again after a gap of 5-10 minutes. That seemed to work once but hasn't since. I've tried uninstalling my network, removing any links on the keychain and then reinstalling, all to no avail. I have a 13" Macbook aluminium body which is still under the 3-year warranty period. Before I approach Apple Support, is there something that I should do? I have a feeling that somehow this can be resolved fairly easily, but then I admit to not being a computer expert by any means. Any help would be appreciated. Thanks. 

    If there is nothing connect or using to the airport express, you can try to reset the airport express back to standard.
    And the default password is "public" if I am not mistaken.
    And see if your MacBook can connect using that open wireless connection.
    Good Luck.

  • Extend wireless network from Uverse/Motorola 1ZVDC via Airport express

    After spending 2+ hours trying to extend son's network via A Express, can this be done straight from his uVerse Motorola 1ZVDC modem?  I can get the express to show up, but will not work/extend network, and doesn't show up in wireless menu; only in airport utility :-(
    Now I saw an old post which says express cannot expand network from non-apple modem.  Is this correct? I don't think he wants to pay for Extreme + express.  I am certain that, at my other residence, I am using an express directly paired to my uVerse.  Here, main residence, I have 3 paired with Extreme. 
    He had bought a cheap extender which has to be plugged into USB on computer (wouldn't this be the modem?).  I was positive the express would do the job.
    His setup: OS X.6.8
    Airport: 5.6.1
    uVerse Motorola: 1ZVDC
    Apple Express:one below
    What if I plug the express directly into the modem?  Of course, probably won't extend network, which is my objective.
    If I give him my old extreme, what are advantages to new one?
    TY for your help.
    Ruth

    You cannot use extend to other brands.. it is apple proprietary method of repeater.
    What if I plug the express directly into the modem?  Of course, probably won't extend network, which is my objective.
    You can always plug in by ethernet and setup the express to create a wireless network with the same name and same credentials as the existing wireless.. this is called roaming network and is far superior to extend.
    If ethernet does not allow you to place the unit in the right place.. you can try EOP adapters. (homeplug in the US).
    If I give him my old extreme, what are advantages to new one?
    You can extend wireless by plugging the extreme into the main modem.. setup wireless to create a wireless network.. the Express can extend an apple wireless network.
    However please do understand the restrictions.. extend will halve the speed at best.. at worst it will be too slow to be usable. And the range can still be poor.. apple do not make wireless powerhouses.. they are average at best.
    He had bought a cheap extender which has to be plugged into USB on computer (wouldn't this be the modem?).  I was positive the express would do the job.
    If it is a universal extender it should work but needs to be located where the signal is still good.. USB is probably just for power.
    If the computer cannot pick up wireless signal then the extender cannot work either.

  • HT3669 Failed printer setup, bonjour via airport express on 10.8.3, unable to download drivers?

    Trying to install a Samsung SCX-4500 printer over bonjour via airport express. My Mountain Lion machine sees the printer and I've manually installed the latest Samsung drivers, it says it can't find the software on Apple's servers. I just downloaded the latest drivers from Samsung directly, it did not resolve the problem.
    I am unable to select printer drivers manually for the 4500; even if I manually select the 4500W drivers it still attempts to download software (unsuccessfully). It works perfectly on 2 Lion machines and a PC, unsure what the deal is.
    I'm having trouble even getting the post message' button to work now, it isn't my day...

    Link to Apple supplied print drivers:
    Samsung Print Drivers
    You can also try resetting the print system:
    Reset Printing System

  • Printer Spooling via Airport Express...

    My G4 is connected via Airport Express to a printer. It has worked fine, in the past, but now when trying to print, it appears to connect but then a message reads, "spooling" and hangs without ever printing. What should I do to correct this, please?

    Have you tried posting this in the "Airport Express" Category of the Forum?
    If not, I'd suggest that as you may get more help there.
    http://discussions.apple.com/forum.jspa?forumID=1011

  • Trying to add HP Photosmart C4280 via airport express. "Add Printer" correctly finds printer as Bonjour kind but "add Printer" cannot find printer software from Apple

    trying to add HP Photosmart C4280 via airport express. "Add Printer" correctly finds printer as Bonjour kind but "add Printer" cannot find printer software from Apple (although it says that the software is available from Apple)

    Rfh723-
    You are technically way ahead of me, so I can't argue with what you did.
    How about an even simpler WiFi network consisting of only the AirPort connected by an Ethernet cable to the printer?  If the iPad still can't find the printer when connected to this network, then something is broken!
    (Also try a different Ethernet cable.)
    Fred

  • Share printer with Windows 7 via Airport Express?

    I would like to share a printer with a Windows 7 Laptop via airport express. The Windows 7 Pc does not detect the printer whereas printing from the Macbook Pro works fine. Any ideas?

    Hi,  I was searching for the same (my colleague has a windows PC; everyone else here has mac). I have not tested this, since I am working on mac, but it seems like you need to install "Bonjour" for windows.
    http://support.apple.com/kb/ht2586
    Hope this helps (though it's a bit late)
    /W

  • Can we print with a non-wifi printer via Airport Express?

    Is it possible to print with non-wifi printer via Airport Express?

    Read through this previous thread for answers: https://discussions.apple.com/message/21994667#21994667

Maybe you are looking for