Printer not supporting Polish and Danish Characters
Hi,
We have a printer with model Intermec PM4i used for label printing.
We have a suitable customized device type for this printer.
This device type works fine with other printers.
The problem with the printer is that it does not support Polish (Poland language) and Danish (Denmark language) characters.
I thought there was some problem with the device type and hence we changed the device type to standard one i.e. LB_INT
But this did not help.
Can anyone please help me resolve this issue?
Does your custom device type have a code page that includes the danish and polish special characters?
Does the font you're using (SAPScript/SmartForm) support those characters?
You might want to try the Forms Printing forum, this may be too specialized for this forum.
Similar Messages
-
Why does my cell phone say printer not supported
I am trying to print from my android phone and my cell phone says printer not supported.
I have a HP 5510 photosmart printerHi maddymel39;
I hope you are doing well
what cell phone do you have?
What version of the Operating system is in the phone?
What application are you using to print? provide this information and I will do my best to help you.
Regards;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance! -
Why do I keep getting default printer not supported?
I have had my printer for aprox.three years without a problem, now I get default printer not supported and printer not activated error code 30
Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
Urgent :..Nokia 60 Series SDK Emulator not supporting Alert and Ticker
Nokia 60 Series SDK Emulator is not supporting Alert and Ticker and i m struck in my Project.The emulators soming with Sun One Studio 5 mobile Edition are supporting it Please help me
Thnx
AmitDownload and use Nokia J2ME sdk Nokia developer suite for j2me 2.0, It atleast supports ticker, i know its a beta version of series 60 emulator...but try that one
manas -
Why Microsoft Office for Mac 2011 does not support Arabic and persian?
Why Microsoft Office for Mac 2011 does not support Arabic and persian
For Arabic/Persian on a Mac, the best app is Mellel. But TextEdit, Nisus Writer, or OpenOffice should also work OK.
-
Polish and Czech characters not displaying
Hi Experts,
I have to display the characters in Polish and Czech in adobe reader XI. Currently the text displays in unreadable format. Can anyone please help how this can be rectified?
Thanks
TridibHi Tridib_Das,
You have to download the Reader font pack to get this working. Try to download the pack from this location, see if that works: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4885
~Deepak -
Messages.properties file not supporting vietnamese and chinese
Hi, I need to support multiple languages in my application.
When i am creating the corresponding messages_vi , messages_zh properties files, Jpf is not picking up the corresponding property file as the property file is not supporting the vietnamese and chinese characters.
Can anyone help me on this.Jpf is not picking up the corresponding property file as the property file is not supporting the vietnamese and chinese charactersThis is incorrect. But it is vague enough that I cant make out what the problem is.
a. Are you getting english always? . if yes then how are you specifying the locale? Which tag is being used to print out the labels?
b. If you are getting invalid characters(i.e. file picked up but doesnt display correctly , there may be multiple causes. Also note that java property files dont support native encoding (you must use native2ascii to convert from whatever encoding you used to ascii only characters i.e. \uxxxx).
regards
deepak -
Included Mini-DVI to DVI adapter does not support HDCP and iTunes HD movies
Hi.
Just downloaded Twilight in HD (to own) from the iTunes Store and had the annoying message about HDCP not being supported by my display, and that I could not play the movie in HD.
My Mac Mini is plugged to a very HDCP-compliant Sony Bravia 40" LCD TV via Apple's mini-DVI to DVI adapter (included in the new Mac Mini's box) and a DVI to HDMI cable.
(HDCP works well for this TV with a PS3, another Sony Blu-Ray player (the 2 are for zones A and B), an AppleTV)
Since I have other recent Macs with a Mini DisplayPort, I happen to also have an Apple branded Mini DisplayPort to DVI adapter.
So I replaced the (mini-DVI to DVI) adapter by the (Mini DisplayPort to DVI) adapter and plugged it on the Mini DisplayPort on the Mac Mini.
I can now play the HD version on my Sony TV!!
This really sounds like a joke!
A joke that is going to make me go the shop and buy another (Mini DisplayPort to DVI) adapter, since I like to always have one, as well as the VGA adapter, with my MacBooks.
Let's hope there will sonn be an iTunes, Leopard, or mini-DVI to DVI adapter firmware update very soon to fix this.I am actually very surprised that your miniDisplayPort to DVI transition works with HD content.
I'd consider that a bonus and cherish it until Apple removes that functionality in a future update.
It is probably a bug as it should not work.
The thing to keep in mind is that DVI cables do not support the necessary DRM/encryption signals for HD video content.
This is one of the main reason DisplayPort was introduced.
So I am not surprised that miniDVI to DVI to HDCP does not play HD content on your TV.
In fact this is +expected behavior+ due to the lack of DRM/encryption signals.
No matter how you convert from miniDVI to DVI, the port cannot create something that it doesn't have in the first place.
The more I am surprised that the miniDisplayPort to DVI to HDCP transition provides these signals. I would have expected them to be filtered out in the DVI cable in the middle as this cable cannot pass something on that DVI is not designed to carry (HD DRM/encryption signals).
It could very well be a 'bug' in the miniDisplayPort to DVI cable controller, which Apple might 'fix' in a future driver update.
It is likely a mistake that this works.
What you really need is a miniDisplayPort to DisplayPort to HDCP conversion. Or directly a miniDisplayPort to HDCP cable. Those are the only routes that are guaranteed to work passing HD video DRM/encryption signals along.
But as far as i know neither of these two cables are available yet.
Which might be the reason why Apple - for the time being - allows your miniDisplayPort to DVI route to work. Emphasis on +for the time being+.
I would not count on the fact that this will work forever.
And I would certainly not count on a software update that will make the DVI route work. This will never work due to DVI's incapacity of providing DRM/encryption signals for HD content. -
It's very odd. I take photos with my iPhone and then later go to view the photos in the Photo Gallery on my iPhone. The photos to appear, but I keep getting "this movie format not supported" alerts, even though I am looking at photos taken by my iPhone. The alert appears briefly just after the photo appears and then the alert goes away and I can see the photo. They are just still photos and not movies. Why wouldn't the iPhone recognize the format of photos it is taking?
That thread helped for a time. But now it seems as though my computer is back to slow again. But, some of the jargon is over my head as well. Not sure I knew quoite everything they were talking about. But thanks a lot for that, it helped I probably just need to reread it and follow the instructions again. Thanks so much.
-
Anybody help - going on a charity trek next week and my solar charging kit (Goalzero Nomad 3.5 with Guide 10 and Switch 8) is giving a 'not supported' error message and stops charging?
The 65W and 90W will definitely not work with the W510.
The link you sent has no mention of a W510 in the hardware compatibility list.
You need to order another charger i.e. 135W.
Copy and paste from the 65W URL you sent.
Description
Machine - Models
ThinkPad Edge 11, 13, 14, 15, E220s, E420, E520
All
ThinkPad L410, L412, L420, L421, L510, L512, L520
All
ThinkPad R60, R60e, R61, R61e, R61i
All
ThinkPad R400, R500
All
ThinkPad SL300, SL400, SL410, SL500, SL510
All
ThinkPad T60, T60p, T61
All
ThinkPad T400, T410, T410i, T400s, T410s, T410si, T420, T420i, T420s, T500, T510, T510i
All
ThinkPad T520
Dual Core models only
ThinkPad X60, X60s, X60 Tablet
All
ThinkPad X61, X61s, X61 Tablet, X61LS
All
ThinkPad X100e, X120e
All
ThinkPad X200, X200s, X200t, X200 Tablet, X201, X201i, X201s, X201t, X201 Tablet, X220, X220t, X220 Tablet
All
ThinkPad X300, X301
All
ThinkPad Z60m, Z61e, Z61m, Z61t
All
Lenovo 3000 C100, C200
All
Lenovo 3000 N100, N200
All
Lenovo 3000 V100, V200
All
ThinkPad Ultrabase Series 3
ThinkPad X200 Ultrabase
ThinkPad External Battery Charger
ThinkPad Battery 19+ (6 cell Slim External)
ThinkPad Tablet Dock
Notes: -
HBO gives me a message saying that my browser does not support the service and that I need Safari 3 or higher, I have an ipad 3 and just downloaded the last version of Ios from Itunes, so I believe I should have the last safari version
If someone knows what may be happening please tell me
ThanksYou can't watch HBO using the Safari browser on the iPad at all. HBO has an app in the App Store called HBO GO. You must subscribe to HBO in order to use it
https://itunes.apple.com/us/app/hbo-go/id429775439?mt=8 -
C2-03 not support streaming and all network settin...
I have C2-03. This set not support all type of network settings and streaming.
Solved!
Go to Solution.Hi Subhams302,
have you checked with your network carrier that you have the correct settings for Internet and streaming? They may be able to send the settings to you via SMS if they are not correct on the SIM already provided to you. -
I uninstalled the beta version 4.0 and have downloaded 8.0 several times. When I go to gmail I get a message at the top that my browser is not supported and I should get the latest version . . .
Your UserAgent string in Firefox is messed up by another program that you installed. <br />
[http://en.wikipedia.org/wiki/User_Agent]
type '''about:config''' in the URL bar and hit Enter <br />
''If you see the warning, you can confirm that you want to access that page.'' <br />
Filter = '''general.useragent.''' <br />
Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset'''''. <br />
Then restart Firefox -
Oracle reports not supporting WCHAR and WVARCHAR
I have been using Oracle Reports Builder 10g (Report Builder 9.0.4.0.33) to test against an ODBC backend database via the provided jdbc-odbc bridge, this has been working well but recently the server backend changed to be UTF-8 compatible and as a result now returns the WCHAR and WVARCHAR types (ODBC types -8 and -9). These cause an error in the Report Designer
REP-0069 Internal Error
JDBCPDS-62013: The column type WCHAR used in the query/procedure is not supported by Reports JDBC Query.
I have my NLS_LANG and DEVELOPER_NLS_LANG set to ENGLISH_UNITED KINGDOM.UTF8.
Is there any way to enable the support for WCHAR/WVARCHAR in the Reports Builder?
Regards,
Adam.Is this a problem with one type of report? Does a simple test report created in the builder work ok?
How are you running the report? From a URL or from Forms?
Is there any error showing in the ?/reports/logs or in the ?/opmn/logs (either in the report server log or in the OC4J)?
Can you run the report using rwrun? -
I'm still very new to forums so please excuse anything that may have been previously asked. I purchased a USB controller for my mac to play a couple games and the vibrate function on the controller will not stop. I was wondering if there is a way to access the controller setting or if os x supports plug and play controllers? Any help is greatly apprectiated.
Hello Knowledgelink
Go through the steps in the article below to restart your iPhone into recovery mode to then restore your iPhone to the latest version of iOS.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G.
Maybe you are looking for
-
In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?
-
Mail.app and Netscape Messaging Server v3.6
We are trying to track down performance issues with Mail.app in both Tiger and Panther. Issues include how long it takes to download large attachments (PDFs upwards of 10MB), how long it takes to synchronize and cache, and other things that appear in
-
Problem with my payment.
I downloaded OSX Lion and the iTunes got of my Debit card $29.99 three times that's mean almost $90 , i want to know what's wrong with it?
-
Headphone jack broken off inside Macbook--HELP!
My dad recently gave me his MacBook Pro, only problem is the audio is completely broken. This occurred when the computer was on the bed with headphones were plugged into the headphone port, and the dog jumped on the headphone jack, breaking it off in
-
My ipod just won't work.. when I try to reset it using the play and menu button, the apple logo comes on, but it just keeps on flashing,and will continue to do that forever, I can get it on disk mode, but thats about all I can do. Itunes recognized t