Printer not working after 10.6.8 update

Hi,
My printer was working fine until I updated my imac to 10.6.8.
Now, i have been getting this error whenever i try to print:
Error:/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/ MacOS/rastertoescpII failed
I have an Epson stylus PHOTO RX640.
Im not sure about the driver as i havent needed to download a driver manually, before when I first tried the printer(before update) it automatically worked and printed and didnt ask me anything about drivers..
I tried deleting my print queue, restarting everything, changed my printer to factory settings. (I've looked on other places and i wasnt sure what it meant bby manually adding printer queue..?o.O)
My printer only doesnt want to print. it scans fine, just doesnt print.
HELP PLEASEEE

I don't think that it was the 10.6.8 update. There was an update to the Epson drivers that came out only a couple of days before 10.6.8 became available. You most likely installed the Epson 2.7 drivers along with 10.6.8. That version of the Epson drivers will not work with your printer. See my post in a similar thread on how to revert back to the Epson 20.6 drivers.

Similar Messages

Illustrator tools dropdown is not working after the recent software update

My Illustrator tools dropdown is not working after the recent software update. Any help would much appreciate.

Same problem here. I have a Mac with a recent Yosemite update.

Home button not working after 5.0.1 update

Ok now the home button not working after 5.0.1 update. Anyone have any ideas? How do I roll backfrom this update?

This happened to me as well. AT&T had me reset my network settings and this fixed the problem. Here is how...
Settings > General > Reset > Reset Network Settings
"For now" the problem is fixed for me.

Touch ID not working after IOS 7.1 update

Touch ID will not work after the recent update, rebooted iphone to no avail. I then deleted all finger prints, but iphone will not recognise new fingerprints ..... Annoyed is not the word ! Any ideas ?

I'm like, Touch ID almost dead, we're going apple fixex this.
Seems it only is affecting the white model

My iPad orientation is not working after the IOS 8 update. Please fix this bug!

my iPad air orientation is not working after the IOS8 update. Can you fix this bug? Thx

Did you try a reset?
Restart / Reset
http://support.apple.com/kb/HT1430

Drobo not working after 10.5.8 update

My drobo stopped working after 10.5.8 update. Now I lost all my data on the drobo. this doesn't make me happy.

'We are using the USB interface (as opposed to firewire) because we want to share the drive across the network - it's not always about speed.'
This makes absolutely no sense to me.. but maybe I am wrong : Because firewire is much more reliable than USB and manages to keep highest transfer rates (without jumping up and down as USB would do as soon as I/Os go up...) Especially on a Mac ! (only for the latency I am not too sure, but I guess it is similar on fw and USB.. just increase the caching if you stream hd movies on the network...
From my experience, sharing a USB drive on the network is probably much worse.. you can find example on the web.. (Orb, Plex and else will start drop frames when connecting to a USB shared drive.)
I currently use my drobo plugged to my Mini with a fw800 to 400 cable,4*1.5tb hdds, I also share it on the network with gigabit ethernet, and get much better performances than any usb shared drive.
Sorry I do not have any precize measurement, but I can upload or download a 6tb file in about 10minutes over gigabit ethernet, and I guess the bottleneck is now the Drobo controller...
The protocol you use may have an impact as well (afp, smb,...) but whatever you use, I suppose Firewire will be faster.
As a general advice, do not update or upgrade anything in general before you have a backup of your data, this is true for any storage system, Drobo or not.
Oh, and Data redundancy on a raid is not a backup of course.
Vincent
Message was edited by: v1ncen7

External monitor Syncmaster 2494SW not working after 10.6.7 update

External monitor Samsung Syncmaster 2494 SW stopped working after 10.6.7 update on 2011 MacBook Pro. I'm using miniDP-DVI adapter. The monitor shown correctly in Display Properties with right modes and name. MackBook recognizes connection but the monitor goes to PowerSave mode (LED indicator blinks).
Safemode boot, SMC reset, PRAM reset did not help.
Exactly the same setup works perfectly under 10.6.6.

HERE IS THE EASY FIX SOLUTION FOR THIS PROBLEM GUYS:
I have an 15inch MacBook Pro that I've just installed Snow Leopard 10.6.3 on.
Prior to this install, I've had it hooked up to my Samsung SyncMaster 2243 via an Apple MDP/VGA adapter and a third party VGA cable. It has been flashing on and off a black screen every now and then for the past 2 years and I googled that it was just a crappy communication between the MBP and the Samsung... but now since installing 10.6.3, the Samsung display just flashes the desktop for a second then turns black for good - occationally flashing analogue/digtal prompt display. Tried everything for hours. Nothing worked, thought I was gonna have to buy a new all Apple VGA lead then came across Michael's above solution. Tried it and it worked IMMEDIATLY!!! And the monitor doesn't flash black anymore AT ALL!! Whoo-hoo!! Thanks heaps.
WHAT TO DO TO FIX:
Go to => System Preferences => Energy Saver => change graphic settings to Higher Performace.
Cheers!!

IPod touch not working after 5.0.1iOS update

It seems like a lot of people are having issues after the new 5.0.1iOS update. I want to share my frustration and what problems I'm facing. After the update my ipod won't sync properly. It freezes my computer and then my computer shuts down everytime I have my ipod connected to my computer. My music and apps on my iPod are like ghosts they are visible but do NOT work after being pressed. I tried resetting the ipod, same problem. I uninstalled and reinstalled iTunes, same problem. There is only problems with my computer when the iPod is plugged into the computer and trying to update. I am so ANGRY because I love my iPod and I can't use it to listen to music or communicate with my family and friends. I hope Apple will help all of us soon and fix these HUGE bugs, and FAST.

Have you tried the sandard fixes:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Retore from backup
- Restore to factory defaults/new iPod.

Trackpad not working after 10.8.4 update

Macbook Pro with Retina Display late 2012. Trackpad clicking function stopped working after 10.8.4 update. Any advice? I've tried zapping the pram, resetting the smc. Nothing helps.

Apple store genius bar appointment is the best option for a positive resolution.
Ciao.

Printer Not Working After Update

I saw an auto update from HP that popped up and stated it was to correct current reading errors in the hp printer from the computer? I NEVER update my printer hardly ever because I KNOW that HP has a reputation for messing up with messages about ink etc. BUT, I went ahead with this one, just in case! NOW my printer won't print anything from my laptop, and I am so pissed because I was in the middle of a printing project and my printer was working JUST fine until I did the update! I swear, I will now have to go buy a NEW FRICKING PRINTER when it was working perfect a few minutes ago!!! GUESS WHAT, I will never by HP printers again!!!! I have the HP Photo Smart Plus, and it is wireless, and it is about two years old, got it in around 2009. It always says it's out of ink but yet continues to print just fine for several months over when it says I should replace the ink. Hmmmmmmm. Now this!!!!! What am I supposed to do??? HP isn't going to answer this. Looks like they set up this conversation to just get FEEDBACK from the public? I don't have the time to wait for a response from the public or to try and call someone at some odd number and wait on the hold for two hours. My job is in two hours and I needed my work printed before I went.. I AM PISSSSSED!!!!! How can I ever TRUST HP again!!!!!! I could never do an UPDATE with you eVER!!!!! YOU CRASHED MY PRINTER!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Did I mention how mad I am????? I am going to tell the world about this!!! You know why??? You don't care, and you will just ignor this!!!!! Norine Mungo

Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
In the future please read this post then provide some details. What printer model? What operating system? Are there any error messages on the printer or computer screen?
Please be aware that this forum is a peer to peer support forum, it is not a direct link to HP support. Likely if you had called HP your issue could have been resolved in one phone call....
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Canon S750 printer not working after upgrading to Leopard

Leopard is brilliant, and everything works after I upgraded from Tiger except... my Canon S750 printer gives error messages and fails to print. This is VERY annoying. I can't seem to find an S750 driver for OS X 10.5 on Canon's web site. So, what to do next? Just wait, and keep logging on to Canon's web site in the hope that, one day, the driver will be there? I can't find any official statement from Canon as to what they're up to. Are they currently working on drivers for Leopard? Do they have any projected "release dates"? Are they at all interested, or would they prefer to sell me another printer perhaps? Any information on what I should do now will be gratefully received. Thanks.

UPDATE... my S750 printer has suddenly started to print OK! This is rather bizarre, since I've not re-booted, haven't un-installed/re-installed the printer. End of topic!

Quick Print not working after upgrading to Reader XI on Citrix

Hi,
I've upgraded from Reader 9.2 to 11.0 on our Citrix farm.
After the upgrade the Quick Print function in Outlook 2010 is not working anymore for PDF files. (other files are working fine)
Also, the RightClick --> Print on PDF files in Windows Explorer gives an open-with prompt. (other files are working fine)
Even if I choose Adobe Reader and chech the box "Always use the selected program to open this kind of file", the open-with prompt re-appears the next time I rightclick and choose print.
If I DoubleClick PDF files in Windows Explorer or in Outlook e-mail attachments, Reader opens as it should.
I've also tried to install the latest 11.4 update, without any luck.
The same installation sources were used on several local workstation, where everything is working fine after the upgrade.

It's definitely a Lion's issue as I rolled back to Snow Leopard after struggling with the card reader and surprise....all my cards can be seen again and my MacBook early 2010 works perfectly. Just as it was working before I purchased Lion. What to do? Well I guess there is only one way to fix the problem. We should demand from Apple to debug Lion from this and many other errors in the code. Overall I am not very impressed with my first Lion encounter and will stay on Snow Leopard untill people would be able at least to use the MacBook hardware properly under any Lion built. I have also had so many other issues with Lion that it may take a few hours to list and it's not a purpose of my visit of this thread. Cheers to all and stay cool.

Ichat not working after recent Lion OSX update. What happened?

After installing todays update of Lion, my ichat does not work. It will not let me log in, only displaying "ichat cannot communicate with the account."

What recent update? The last Epson R220 update for non intel Macs was 08/19/10: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=60202&prodoid=58654 761&BV_UseBVCookie=yes&infoType=Downloads&platform=Macintosh&x=21&y=13
What happens when you click on the EPSON Printer Utility which should be inside the Utility folder? Have you tried repairing permissions and restarting your computer? Have you read Epson's user manual and/or contacted their tech support?
I also have the R220 model. Besides using their drivers, I also use the Gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php

Excite PRO 3G connection not work after Android v4.3 update

Hello,
I live in Italy and on last Sunday (january 26th) my Excite PRO tablet (model AT10LE-A-10H) got the Android version 4.3.201121220.35.
After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
My sim card is ok. I used this sim card before the system update and I didn't get any problem with Android 4.2.2.
Please help me.
Thank you

>After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
Go to the mobile network settings and search again for the 3G network.
I had similar problem with my Android Smartphone and my o2 provider
I started new search, then I chosen the O2 again and then I could solve the problem.
In case this does not work for you, recommend you to reset the tablet back to default (factory settings)

Exchange email will not work after IOS 5.1 update. Anyone else having same problem. Its been three days now I cannot get mail.

Exchange Email not working on Iphone 4S is anyone else having the same problem and is there a fix for this?

@ w3nitro
I'm having the same issues, except only one of my Exchange accounts took a dive after upgrading to iOS 5.1. My Gmail account (set up as Exchange) works flawlessly but my native Exchange account (work e-mail) stopped working after the update.
Post update to 5.1: (work Exchange account) I could view my inbox and view individuals emails in the inbox, but I was unable to send any emails. Mail started asking for my password after the update (for the affected Exchange account) but once entered, it failed to verify.
I completley removed the Exchange account and rentered all the account settings but again, failure to verify any information. I was hoping my password might have changed but it did not. Also, maybe the IT guy at the office (not very bright) changed some settings but the only difference is the new iOS update.
And while playing with the iPhone trying to make it work again, I noticed something really weird. Old emails (2-3 weeks) from multiple email accounts to include the inop Exchange account started showing up again on the pull down notification menu. I would clear these out of the notificaion menu but they always kept reapearing; very strange.

Printer not working after 10.6.8 update

Similar Messages

Maybe you are looking for