Printer not working after installing new cartridge

have HP D5460 printer. Installed new black cartridge only #564 since I only use black ink. Error message appeared
"Oxc19a0020 turn printer OFF & then ON". Did that and also checked to be sure cartridge was installed properly. It Was.
I can't get the printer to work. What now? Thanks.

The battery is already full. It happened suddenly and started showing low battery sign and sign to charge the ipad. Nothing happening with pressing buttons or even putting on for charging for quite some time.
iPad (3rd gen) Wi-Fi, iOS 7.1

Similar Messages

HT4623 my phone main button not working after installed new version software 7.0.6

my phone main button not working after installed new version software 7.0.6

Arrange some liquid like petrol spirit and w 40
two drops in to home button.
30 times press slowly slowly and then restart your apply iphone.
You will get ready.
I am sure. Thanking you...

Wifi connection with 4s not working after installing new software ios6

wifi connection with 4s not working after installing ios 6.

Go to Settings > WiFi > Select your network and hit the right arrow to "Forget Network"
Then go to Settings > General > Reset Network Settings and try connecting again when the phone restarts.

Whatapp is not working after installing new softwa...

hi.. i am using nokia asha 311phone since last three months. fewdays back i got a phone software update on my mobile from nokia..so i installed it..after that whatsapp application is not working..plz tell me what should i do?????

Try deleting it and downloading it again.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

Wireless mouse does not work after installing new batteries

I have a PowerBook G4 and have been using a wireless mouse and keyboard. The batteries needed to be replaced in my mouse. I successfully installed new batteries. The mouse will turn on. The LED blinks. But the mouse is not functioning. I must use the finger pad on the machine. I double checked the battery installation and even set-up the mouse as a device again. When I turn the mouse off, I get a "connection" lost window on the screen. I have tried
clicking the mouse to re-establish connection with no luck.
Any suggestions?

http://docs.info.apple.com/article.html?artnum=86468
I had the same problem today - go to the above URL and follw precisely the instructions - after you delete the current mouse settings from your bluetooth preferences - apparently you have to sometimes reinstall the mouse after changing batteries - however I changed them before and did not need to do this
hope this helps

Touchsceen will not work after installing new hard drive

Hello,
My HP TouchSmart 520 - 1047 c PC's hard drive crashed this week. I went out and purchased a new one, installed it, loaded my Windows 8 Pro disc in, and got it back working. The only issue so far is that my touchscreen will not work. HP support says it's a hardware issue and was no help.
Please help.
Thanks,
Mike

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Navigating through photos in single-photo view in iphoto with trackpad is not working after installing new OS Mountain lion

I have recently download new OS Mountain lion on my macbook (white late 2010 model). I had snow leopard before.
On iphoto, when i was viewing my photos in a single-photo view (double clicking on a photo), i was unable to go to the next photo/previous photo using my trackpad. Only way i could do this was by pressing arrow buttons on my key board.
If i remember correctly, i was able to do this by using 3 fingers (sliding left to right or sliding right to left) on snow leopard.
I can navigate back and foward on my internet browser using two fingers. And yes, i have tried using my two fingers on iphoto but nothing happens.
I have checked my trackpad setting and everything seems to be right.
Any ideas how i could fix this?
Thank You
p.s. i have iphoto 09

Terence Devlin wrote:
I can navigate back and foward on my internet browser using two fingers. And yes, i have tried using my two fingers on iphoto but nothing happens.
This works here - but I'm on iPhoto 11. IIRC it worked on 09 too though.
It's not working for me.

My MG3200 printer is showing "printer not responding" after installing new ink cartridges.

Ever since I replaced the ink cartridges in my printer it won't print showing a not responding error. I have tried troubleshooting but still doesn't work

Hello,
If you are using the printer on a wireless connection, check out the link below for step-by-step procedues you can try:
http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secu...
If you are using a USB connection, try this:
http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secu...
However, if the issue persists, please reach out to our technical support team at http://bit.ly/Phone_Support
Thanks!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

GPS not working after installing new 2.0 and slow iPhone!!!! HELP!!!!!!!!

upgraded to new 2.0 and installed some new application but now by GPS/MAPS doesn't work. when i tap on it 5 seconds later it return back to the main screen and my iphone is slow!!! i rebooted 3 times and nothing and i even deleted the new applications and still nothing!
any suggestions or help would be appreciated.
julio

You are Crazy Latino. You never had GPS capability with your original iPhone. Maps is using skyhook and cell tower triangulation to locate your position.
You can't say that you meant maps when you wrote GPS, and then roll your eyes when you do not accurately present your question and someone answers your original question...
crazy latino.

Apple keyboard not working after installing new monitor

Yesterday I installed a new monitor - HP EliteDisplay E231i - to my Late 2013 Mac Pro. Previously I had been using super old apple monitors. My apple keyboard was working great - I had it plugged into the new monitor itself. I shut down the computer last night. This morning, the Mac Pro won't recognize my keyboard no matter what I do. I tried plugging it into every possible USB port on the tower and on the monitor. Restarted it after moving it each time. I'm currently typing with a Microsoft keyboard, which is working fine. I tried the keyboard in 2 other laptops (macbook pro) and it works fine. Is this a bug specific to the monitor?? I've been running Yosemite 10.10.2 since the last update, and I've had no issues till I switched the monitor out and tried to start the computer after shutdown.
Details: Mac Pro (Late 2013), Yosemite 10.10.2, 32 GB 1866 MHz DDR3 ECC, AMD FirePro D500 3072 MB
Anyone know what's going on?

Try resetting the SMC and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM

Monitor not working after installing new memory in Mac Pro

I installed 4GB of new memory in my first generation Mac Pro following diagram. When I booted the monitor is black. The key board is working but not the monitor. I removed the new memory and tried again but same problem. Any suggestions on solving this problem would be greatly appreciated.

Well no one really buys from Apple and higher density goes into A1:2 then B1:2 and four DIMMs in those is best symmetrical configuration.
You say you tried xyz but not really very specific to me.
Some users doesn't tell much. However sometimes putting all the 512MB (not 500) on one Riser and the 4GB set on other has worked.
If it doesn't work with just the new RAM alone in A1:2 then it is bad or wrong and needs to go back.
And there have been 3-4 article changes on how to reset SMC. Yours has an SMC button. Leaving unplugged alone is a waste and almost useless. Hitting power button while unplugged was added in 2009.
And it could still be your GPU which is common - 7300 or X1900 or 8800GT... or...

Duplex printing not working after installing HP Printer Driver Update 1.1.1

Hi,
our printers (Lexmark T622, HP Laserjet 2200, both equipped with a duplex unit) are managed by printer queues on our Mac OS X Server (10.5.5). Our users (mostly having Mac Books running 10.5.4 or 10.5.5) are printing by sending their jobs to the queues on the Mac OS X Server (via IPP/TCP/IP).
So far so good.
It seems that the users who have installed the "HP Printer Driver Update 1.1.1" aren't able to do duplex-printouts anymore. All sheets that leave the printers are printed on one side only - the "Duplex" setting by these clients is just ignored. Users who haven't installed the update yet, don't have the problem (at least it seems to me like this, but I have to admit that I've tested it with only three different Mac Books, yet).
My questions are:
- Has anybody else observed this behaviour, yet?
- Or, even better, does anybody have a solution to it? Reinstalling the printer on an affected client doesn't solve it. That's what I tried already.
- Is there any possibility to make the printer driver update "undone", which means to do a kind of downgrade from 1.1.1 to 1.1?
Thank you very much in advance!
Best regards,
Steffen

Hi,
it seems that
http://discussions.apple.com/thread.jspa?threadID=1715794&tstart=0#8157481
fixes my problem.
Best regards,
Steffen

Ipad not working after installing new ios 7.1

The battery is already full. It happened suddenly and started showing low battery sign and sign to charge the ipad. Nothing happening with pressing buttons or even putting on for charging for quite some time.

Have you tried resetting the iPad?
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Hp 5510 won't print black before and after installing new cartridge. have done specified checks.

HP Photosmart 5510 won't print black before and after installing new cartridge. Have done specified checks.

sueali301 wrote:
Been through all steps. Cannot find levers.The printhead on the Photosmart 5510 is not removable. For the Photosmart 5510 the troubleshooting steps in the document here may help. Especially make sure the vents are cleared. If that does not resolve the issue then resetting the printer as described in the post here may help. If this does not resolve the issue then read the entire thread here and try requesting reset instructions. If your printer is under warranty I suggest you contact HP for warranty service. If you are in the US call 1-800-HPINVENt, elewhere see the contact information here.

Telephone will not work after installing fax wizard

I have a new HP Office Pro 8615. After I installed the fax wizard, my telephone quit receiving or sending calls. The only incoming call will ring on the fax. Can I uninstall the fax, as I do not need it?

Hi , Welcome to the HP Forums! I see that your telephone will not work after installing fax wizard, for your HP Officejet Pro 8615. I am happy to help! What is the Operating System you are using? Windows or Mac? What version? If you do not know the Operating System you are using, please visit this website. Whatsmyos. If you do not need the fax, all you should have to do is unplug the phone cable from the back of the printer. That will prevent the printer from using the fax function. If your phone continues not to work, I would consider contacting your phone provider. Thank you for posting! “Please click the Thumbs up icon below to thank me for responding.”

Printer not working after installing new cartridge

Similar Messages

Maybe you are looking for