Printer not working via usb connection to airport time capsule

I bought an airport time capsule 3 TB, and I wanted to connect my multifunctional printer-scaner "canon i-sensys MF4350d" via usb to my airport device.However, I found a problem. Although my printer working properly in direct connection via usb,not working when connected via usb to my airport time capsule. when I chose printer In nearby printer list this error apeared:"the software for this printer is currently unavailable please contact the manufacturer for latest version" when I chose add printer and chose the printer model this error apeared:"the printer information has not been acquired"
devices:
printer: canon i-sensys MF4350d
air port time capsule 3 TB
macbook pro me664
osx mountain lion 10.8.5 (latest version)
printer software:canon UFR II ver 2.43(latest version for my printer)

Login to airport utility via Mac or windows pc. Look under connected usb devices and it should say your manufacturer for the printer. If not try rebooting both printer and router with them being plugged in or try different usb cable or port on printer.

Similar Messages

M9 not working via USB connection.

From the card directly onto the macbookpro it recognises only the camera not the lens in the metadata. Nothing via the USB connection. Does anyone know if we are still waiting for an update to Aperture for this? If so that's ok, I'd just like to use Aperture rather than Lightroom.
Thanks.

Login to airport utility via Mac or windows pc. Look under connected usb devices and it should say your manufacturer for the printer. If not try rebooting both printer and router with them being plugged in or try different usb cable or port on printer.

How to share external USB drive connected to airport time capsule

I have a 4TB Seagate USB Hard Drive connected to my Airport Time Capsule. The Time Capsule connected to a newer iMac running Maverick.
I use the Time Capsule for Time Machines Backups and as a Router, as it was designed for.
I want to use the external Seagate drive to share content with other devices (Mac, IOS, Windows) on my home network
Problem: I cannot figure out how to SHARE the external Seagate drive so that any other devices can see it.
Steps tried: Go to System Preferences, Sharing, and I am unable to add this Seagate drive to list of sharable objects. It is grayed out.

the drive is formatted as AppleShare. Is that a potential problem?
No, that is the correct setting if you want to share out the drive.
Finally, when I run Disk Utility I don't see the Seagate drive (nor the Time Capsule) at all.
Remember that the Time Capsule is a network drive. Any other drive connected to the USB port on the Time Capsule is also a network drive.
Disk Utility cannot be used on a network drive. It only works on a drive that is directly attached to a Mac. If you need to partition the USB drive or something similar, you will need to connect it directly to your Mac for the operation.
Otherwise, everything looks correct in AirPort Utility.

Can not connect to airport time capsule

Here is what the current situation is:
I can setup the Airport Time Capsule (3GB) form my Mavericks 10.9.4 MacBookAir 2013 using AirPort Utility. However, after setup, I cannot connect to the time capsule using many of the standard ways. Trying both connections of wired and wireless. I have tried:
1. Connecting to the Time Capsule using Time Machine (which I can see the Time Capsule Drive as a selection), and I always get the error "There was a problem connecting to the server “XXXXXX”. Check the server name or IP address, and then try again. If you continue to have problems, contact your system administrator."
2. Using Finder side bar under Shared (which I can see the Time Capsule Drive as a selection), clicking on it, always says Connection Failed at the top of the window. Clicking the Connect As... button results in the same error message as #1.
3. Using Finder, connect to server option, entering the name of the time capsule with .local at the end, and using the ip address and it always returns the same error as #1.
Trying option #3 and looking at the Console for error messages always produces these two messages:
Date Time NetAuthSysAgent[1093]: ERROR: AFP_CreateSessionRef - AFPLoadModules failed 22
Date Time NetAuthSysAgent[1154]: NewAFPLoadModules: bootstrap_look_up failed Unknown service name
Any help would be much appreciated. My computer has security scripts run on it that my company wrote inhouse and not sure exactly what is locked down and not locked down. Thank you.

Using method 3.. try
SMB://TCname.local or SMB://TCIPaddress (I hope obvious you replace with actual name or actual IP).. Please use names that are SMB compatible.. ie short, no spaces and pure alphanumeric.
No luck try CIFS:// etc.
This forces it to SMB1.
No luck ping the TC in terminal.. does it respond??
Do you have ipv6 set ot link-local only in the computer??
Your company may have locked you out.. I would not be surprised. Are you running a vpn on the computer whilst trying to connect to the local network. That will fail and the ping test will show you why.
Date Time NetAuthSysAgent[1093]: ERROR: AFP_CreateSessionRef - AFPLoadModules failed 22
Date Time NetAuthSysAgent[1154]: NewAFPLoadModules: bootstrap_look_up failed Unknown service name
Interesting.. it is blocking AFP perhaps. AFP modules refused.. I do not know the errors well enough but if AFP fails there is a good chance TM won't work. So even if you can mount and access the disk I am not sure you can do TM backups.

Connect to AirPort Time Capsule remotely via Windows 8?

Is their a way to connect to the new AirPort Time Capsule 802.11ac remotley via Windows 8, 7, or XP? I've tried to open up the smb port (445) but i get no luck on my mac or pc. I opened the afp port (445) and i get right in. Any suggestions?

SMB is blocked by 90% of ISP's around the world.. the number of unprotected windows computers that would be exposed opening SMB would probably cause the WWW to collapse.
SMB is entirely unsafe.. it is a local LAN protocol to never ever be used over the internet. It has poor security and when people setup LAN sharing it is often setup with none.
The TC does not expose SMB to WAN.. only AFP..
And no windows computer has AFP protocol add ons.
Summary.. it cannot be done.
Now the right way.. Use a Mac. Either directly or via BTMM and iCloud.
Or relegate the TC to bridge and buy a proper vpn router.. Connect to the network using vpn and you can fully access all network resources as if you were on the local lan. A vpn router is not expensive.

How to connect New Airport Time Capsule to non Apple asdl router

Guys,
I have just purchased a new AirPort Time Capsule to back up the various macs in my house. I want to connect it to my wireless router which is a non apple product but the setup instructions are a little unclear to me.
My current router has simply a phone line connector and the power source coming into it. Do I simply connect an ethernet cable from the Airport to the Router. And if so, do I use the single Ethernet WAN port or one of the three Ethernet LAN ports on the rear of the airport? I assume the other end of the cable goes into any of the Ethernet slots on the back of my router which are marked 'Ethernet', or would it go into the socket marked 'Broadband WAN'?
Appreciate your help and if anyone is willing to speak on phone, I am very ahppy to call you in the next couple of hours! I am in the UK
Best, Anthony

thanks LaPastengue!
Here is what ive got
What ATT router do you have? Exact make and model please.
    gateway 2wire from at&t
What TC do you have.. Latest AC tall one?? Or older one?? If older. .please tell us the model number. A1409 for example from the base mat.
     yes I have the latest airport time capsule 2TB
Please tell us the full setup.. what is currently plugged into the main modem router??
     The Main modem route has an ethernet cord plugged in the other side of the cord is plugged into the phone      jack
Do not plug the TC in first.. plug a single ethernet TC to the computer.. Hmm. so I need an additional ethenet cord to plug the TC into the computer? Leaving the router plugged in as is?
Open the airport utility and change the TC to bridge mode.
https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-23706673-32722 6/450-411/bridgev6AU.png
Update the TC and then plug it into the ATT modem and plug it into your computer or use the wireless and then tell us what happens.

How to connect my airport time capsule to my at

Am I missing some kind of special cord? I can start the software and the software recognizes the airport time capsule only if I plug the single ethenet cord into the time capule not the AT&T router.
Anyone have a minute to help a big dummy here?

thanks LaPastengue!
Here is what ive got
What ATT router do you have? Exact make and model please.
    gateway 2wire from at&t
What TC do you have.. Latest AC tall one?? Or older one?? If older. .please tell us the model number. A1409 for example from the base mat.
     yes I have the latest airport time capsule 2TB
Please tell us the full setup.. what is currently plugged into the main modem router??
     The Main modem route has an ethernet cord plugged in the other side of the cord is plugged into the phone      jack
Do not plug the TC in first.. plug a single ethernet TC to the computer.. Hmm. so I need an additional ethenet cord to plug the TC into the computer? Leaving the router plugged in as is?
Open the airport utility and change the TC to bridge mode.
https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-23706673-32722 6/450-411/bridgev6AU.png
Update the TC and then plug it into the ATT modem and plug it into your computer or use the wireless and then tell us what happens.

Local Printer not working via Remote Link

I have a problem with my remote desktop printing to my local printer. I connect via RD on Windows 7 Home to Windows 7 Pro. I have installed an HP Laserjet Pro CM1415fn printer. All prints fine locally. Also everything printed fine
but have had to have a recent update to my Remote PC that I log into. So the printer had to be reinstalled.
All worked ok for about 6 print jobs then stopped working. Nothing has changed. I have changed the settings on the printer as it seemed to be when the printer went into 'Sleep' mode. I have tried restarting the Printer Spooler in Services
and rebooting the remote PC but no joy.
Any ideas please.

Hi,
You mean after the reinstallation, the local printer worked for a while and then stopped working with nothing changed?
Take a try with the printer troubleshooter:
Open the Printer troubleshooter
Also see if the below thread could help:
Local Printing with
Remote Desktop not working: Windows 7 Pro 32-bit & MS Server 2003
Best regards
Michael Shao
TechNet Community Support

IPOD WILL NOT WORK VIA USB WITH MY HOME TEATHRE

When I plug my iPod to my stereo via USB that came with iPod, stereo says no USB device connected and then after few seconds, it starts playing, although, iPod displays same screen as when synching with the Do Not Disconnect logo and cannot stop it from playing and when I disconnect it, I can't turn it off. This also happens occasionally, that I cannot turn it off.
Any help would be appreciate it.
You can also contact me at carlos_brewer (at) yahoo (dot) com

Darkmonster620 wrote:
It says it'll work with "all" iPods...
When was the manual written? What constituted "all iPods" one year would not necessarily apply to iPods made later.
Throw away my iPod and get a new one?
I don't believe I suggested anything like that.
You might get better answers if you included the exact make and model of the home theatre system. You should also search the forums using the "Search Discussions" box to see if there are any other threads about your particular brand of home theatre. Also, did you ever check the support site or contact customer support for the home theatre and car stereo?
Best of luck.

N9 not detected via USB connection

Since last few months I have observed that my Nokia N9 is not detected via any PC if connected via USB cable. The USB cable is OK because my other devices are easily detected through same cable. Can anyone suggest solution. I have already try to "Clear device" under settings->Reset.
Please help.

@girishpadia
Presumably your N9 still charges when connected to PC USB?
Does this apply to both Nokia Suite and Mass Storage mode presupposing that Nokia Suite is installed upon PC?
Happy to have helped forum with a Support Ratio = 42.5

How to connect a printer to a wireless connection using airport/time capsule

How do you connect a Cannon MP620 printer to the wireless network with my time capsule/airport? It was set up before but I've had to redo all the settings with a new Time Capsule and now the printer isn't working. Can't remember how I set it up before. Didn't seem that hard back then.
Thanks!

So you plugedd the printer into the time capsule usb right?
You need to re-add the printer in the system preferences one more time because the location has moved.

Using Time Capsule with Windows 7. Won't work when modem connected directly to Time Capsule, must be connected through another router.

Apple Time Capsule working with Windows 7 PC will not work when modem is connected directly to the Time Capsule. Only when a Cisco Linksystem is connnected inbetween the modem and the Time Capsule.

Sorry but it needs much more specific info than this..
What modem? Is it cable or adsl or some other?? Is it pure modem or broadband router included?
Cable has specific issues different to adsl.
If you used to use the Cisco/linksys router.. and have not reset the cable modem it will not work. Turn off the cable modem.. it must be powered down.. if battery backup drop out the battery. Remove the coax cable.. get it off. Power down everything else in the network.
Plug in the modem to the TC wan port.
Power up the modem.. wait 2min
Power up the TC.. wait 2min
Power up the clients.
If it has worked you will now be able to open the airport utility on the windows computer and see the TC has a public ip on the WAN port. If not redo the whole thing but leave the modem off.. 15min.. 1 hour.. 1 day.. ring the cable company and ask them to reset. Usually a few minutes is enough.
If you have a modem with combined router.. then bridge the TC. Just google search it.
For other combos.. tell us specifics..

Lost connection between airport time capsule and extreme, can't get extreme back in network, says connection excellent

I have 2 terabyte Time capsule, last gen, not newest. I have a similar airport extreme to extend my network. I was running Lion. I upgraded to Maverick to see if it would fix this problem, and it did not. When using airport utility, latest version, it says that the extreme has an excellent connection, but fails to extend the network. This started the last time I upgraded Lion. I have tried rebooting, renaming the extreme to no avail. I moved it to the same room as the time capsule, no luck.

Hello Thomas,
You may want to try performing a factory reset on the AirPort Extreme.
If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.
Wi-Fi base stations: Setting up and configuring an extended wireless network (802.11n)
http://support.apple.com/kb/HT4259
Cheers,
Allen

Personal Hotspot on iPhone 4s not working via USB cable

In the last couple of weeks, I have not been able to use the Personal Hotspot on my iPhone 4s via the USB/sync cable to either of two 2011 Macs, both running the latest version of Lion, with all relevant software updated, including Flashback removal & Java updates. The connection via Bluetooth & wi-fi is unaffected.
Opening the Network System Preference pane, the connection is shown as iPhone USB, but it is not connected, even with all other internet access methods either deactivated or disconnected.
This issue is related to Lion, as the G4 & G5 PPC Macs running 10.5.8 which I either use or administer are not affected by this problem. The iPhone is running on iOS 5.1 and is not jailbroken.
Is it possible that the Flashback/Java issues and Apple's interpretation of their prevention/removal has affected this aspect of internet access via Personal Hotspot?

Hey, where did that "I have this problem too" link come from?
I have this problem too.

Printing not working via "Faces" view in Aperture 3

When I select a photo via the "Faces" view and then attempt to print, Aperture doesn't present a Print window- nothing happens. When though I select the same pic (or any other) via the "Split Pane" view, Printing works fine. I'm running A3.2.3 on Lion, Intel iMac. Any suggestions?

This is a know behavior see Why is it not possible to print pictures from Aperture´s folder "faces"? (Aperture 3.2.2) among others.

Printer not working via usb connection to airport time capsule

Similar Messages

Maybe you are looking for