Printer off line will not connect

after replacing old router that failed printer displays off line with new router ,rebooted router and printer and still displays off line .Printed network config and wireless has mac address f4ce46d42e37 , status disconnected , everything else enable what now frustrated thanks for looking
This question was solved.
View Solution.

Forgot to tell what model office jet 6500 709n has been working perfect for 3 months until new router install

Similar Messages

  • PAP2T second line will not connect

    I have two voip accounts with the same provider and I have two PAP2T adapters (one for each account).  I can get either one to work by themselves.  I need to get both lines working on the same router.  If I hook both PAP2T devices to the router, the second one can never login to it's server.  If I load the line 2 of either device with the other account, the second line can not login to it's server.
    Ideally, I would have just one PAP2T connected using line 1 and 2.
    How do I set up line 2 with the other account?
    Thanks,
    Joe

    Hello,
    sounds like some of the ports may have been blocked.
    May you test those simple tests :
    1) Swap ports 5060 and 5061 between Line1 and Line2 - watch which line will register, if any ...
    2) IF line with port 5060 registers (Line2) and line with port 5061 (Line1) NOT, may you contact your Internet provider (ISP) if for any reason the port 5061 is blocked, also you may contect the VoIP provider, if registration FROM port 5061 is also accepted ...
    3) You may try "nasty trick" and setup SIP ports totaly crazy - for example 5261 and 5262 - or simply any two numbers. There is, in fact, no restriction on SIP SOURCE port (just uzus, that those are USUALY 5060 and increasing), SIP DESTINATION port is (almost) alwayws 5060.
    I use my SPA-1001 on with ports 5261 and 5262 on Line1/Line2 with no problems.

  • HT1976 my i phone will connect to my wifi server but when i turn the wifi off it will not connect to me celluar network so i cant send messages or use my phone poroperly at all. how do i fix it?

    my i phone wont connect to my cellular network but will connect to my wifi. it recently crashed so i restored it via itunes it restored fine and then wouldnt let me use my internet or send messages because i have no 3G how can i fix this?

    No try this go to settings>general>reset>reset all settings "please note you will need to reput your wifi password in and nothing will be erased"
    please let me know if this helps d:-)
    jaydin curl "first level apple care rep"

  • I have a hp photosmart D110 printer and I can't get it to print. It will not connect to my wireless

    please help me get my printer to print and connectto my wireless

    Wnat router?
    What operating system? 
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HT1695 I am at home and have  a wireless router on my DSL line.  I have been using the iPad for about a month without difficulty and tonight it will not connect.  I do not understand why and yes, I am electronically challenged so be gentle!

    I recently purchased an iPad after using a laptop and PC for years.  I use a wireless router connected to a DSL line at home and have been using the iPad without difficulty for about a month and tonight it will not connect to the Internet.  There is not a problem with the DSL or router.  I am using the laptop now.  Could someone please give this eectnically challenged individual assistance?

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • Since upgrading, both our wireless printers are still visible, but OSX will not connect with them.  Both work via connecting from other sources via the same wireless router (airport).  What do I need to do to get my printing/scanning working again?

    Since upgrading, both our wireless printers are still visible, but OSX will not connect with them.  Both work via connecting from other sources via the same wireless router (airport).  What do I need to do to get my printing/scanning working again?

    First thing to try is reset Printing System:
    OS X Mavericks: Reset the printing system
    Next would be reset the router (power off 15 secs then back on). And, 2 minutes later, reset the printers 1 by 1.

  • My hp c4599 printer will not connect to my wireless network

    My hp c4599 printer will not connect to my wireless network or show up on my computer during the installation even though it is usb connected. But it managed to create its own network where i can print wirelessly by selecting it sort of like bluetooth… I have installed different softwares from the hp website and looked at so many different forums but i cant find the answer. I have reset the printer and wireless network and god knows whatelse. I can also print fine through the usb cable, it just will not connect to my wireless network. I am going crazy P.S. once upon a time it was connected to my wireless network but i cant remember what happened. 
    So can someone please help and please dont be too technical

    Hi ..
    Try these support articles  ..
    OS X: Connecting a Wi-Fi printer to your Wi-Fi network
    Mac Basics: Printing in OS X

  • My ipod touch has a usb cable picture with an arrow pointingto the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the powerbutton is pressed. what can i do to fix this?

    my ipod touch has a usb cable picture with an arrow pointing to the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the power button is pressed. what can i do to fix this?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My ipod nano 7g went off and will not start, this happened after I connect to my computer, my ipod will restart and I no longer turn on. I do?

    please help me my ipod nano 7g went off and will not start, this happened after I connect to my computer, my ipod will restart and I no longer turn on. what I do?

    Hey saintbless,
    Thanks for the question. The following article outlines troubleshooting information for iPod nano. While it mostly refers to the 6th generation, most steps apply for your model as well:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Will not turn on or screen remains dark
    - Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
    - If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Volume Down button for at least eight seconds or until you see the Apple logo appear.
    - If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
    - If the screen remains dark and will not turn on, then your iPod may need service.
    Thanks,
    Matt M.

  • Itunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a new dell computer w/ windows 7 with minimal programs installed

    Itunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a nItunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a new dell, windows 7 ultimate, no virus or firewall programs installed.

    This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
    I live in Europe ,So Be persistent and don't give up !  Aug. 2013

  • Macbook will not connect to printer via the network

    I have my G5 computer connected to my home network airport extreme with an ethernet cable. I have a new Canon MX 860 (which will work over a network) which is also connected to the airport extreme with an ethernet cable (wired lan connection). The G5 and the Canon work well together; printing and scanning etc.
    I have a Macbook that will not connect to the Canon via the network. I have checked and rechecked the setup and am stumped. I get various failure notices:
    "The "Canon..." printer could not be found in your list of printers" (altho it is listed)
    "Unable to get printer status (forbidden)"
    "Status: In use, Default" (altho the printer is ready and not in use)
    "Operation could not be completed -client-error-not-possible"
    Both computers are setup for printer sharing and the printer list allows the Canon to be shared.
    The network works well supporting Macbook and several Tivos.
    Any help on what I should try next?
    Thanks for any suggestions
    John

    Hello John,
    For starters, you don't need printer sharing enabled. Since the MX860 is connected to the extreme via Ethernet, then the MacBook should be able to connect directly to the MX860 via wireless or wired.
    For either type of connection, you need to add the printer via More Printers > Canon IJ Network. You should not connect via the Default browser view, as this will only show the shared printer via the G5 (which you should disable). In fact, based on the errors you are getting, it does sound like you have added the printer by selecting the shared offering.
    So I would delete the current printer queue and add again, using the More Printers > Canon IJ Network menu. This window should show the MX860 with its MAC address in brackets. When you select it and press Add, the printer will be created with a name something like 'Canon MX860 series (00.00.85.xx.xx.xx)'.
    If the printing still fails with the printed added as above, then please reply.
    PaHu

  • Why can I not print from pages but can if I copy to text edit, I get "printer off line message " from pages ?

    Why can I not print from pages but can if I copy to text edit, I get "printer off line message " from pages ?  I use HP wireless printer .

    Are you sure you have the right printer?
    In UNIX/OSX printers are virtual links to devices and even with the same name can be trying to reach a printer via another network address, so it thinks it is another printer.
    Peter

  • MacBook Pro will not connect with Printer

    My MacBook Pro will not connect to my HP Photosmart Printer, both are wireless. Receive a error message

    What version of OS X?  What router?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • TS1398 My ipad is showing a wi-fi network, but will not connect. I've tried turning off and on, and went through the troubleshooting, still nothing. Then I reset network settings as suggested, still nothing. Any ideas?

    My ipad is showing a wi-fi network, but will not connect. I've tried turning off and on, and went through the troubleshooting, still nothing. Then I reset network settings as suggested, still nothing. Any ideas?

    that is the router I am on now reply to this message from my desktop, the router seems to be working fine, thanks

  • I have a HP wireless printer, and im trying to connected to my macbook pro. But will not connect..

    I have a HP wireless printer, and im trying to connected to my macbook pro. But will not connect..

    Isaaura - what printer model do you use?
    While opening Safari click the Bookmarks icon and select Bonjour.. can you see the printer listed there?
    (If Bonjour is not listed click Safari > Preferences > Bookmarks and check Bonjour within the Collections section)
    Can you access the printer by typing its IP from Safari?
    If the printer not available only thoguh Bonjour but an be reached by its IP, what router brand and model are you using?
    Templeton Peck - correct me if I'm wrong, the different OS X forums have a dedicated forum for printing and scanning.. as Apple no longer produce printers about the last 2 decades I would assume those forums meant to deal with other manufactures over OS X..
    john galt - Am I spelling OS X correctly?

Maybe you are looking for

  • Help needed for Adobe photoshop elements 3.0

    My problem has been bothing me for a few years now, but because i was able to still use windows 2000 until a few weeks ago, it never occured to me to find a solution for this. My problem is Adobe photoshop 3.0 in general. After vista, and now windows

  • Itunes does not work on my windows vista

    When I tried to open my itunes, an error window popped up saying, "The folder Itunes cannot be found or created and is required. The default for this folder is inside the music folder" I have no idea what this means. Please help me because this probl

  • SubVI: Save to 'destination' directory How it works?

    Hi, Quick question. Could you confirm or deny how that feature suppouse to work? My understanding is: if my VIs which I have in my APPlication Directory (APPD) refer to others subVIs which are not in my APPD nor in its sub-directiories neither, then

  • Get form field value using an offset

    I have a Form created using Perl that has a table with a row for each invoice in a large table. I display all the rows in a table and allow the user to edit some info for each record: for ($item_cntr = 0; $cntr < $record_cnt; ++$item_cntr) { print qq

  • Ichat & msn messenger problems

    Is there anyway that I can set my status to invisible on iChat? Also- was not sure where to put this next question. On msn messenger for mac- when I try and change the emoticons, either add or remove some from my list, it states that I am only allowe