Printer on Network with both Win 7 32 and 64 bit PCs

I'm confused about how I'm supposed to set up my F4180.
I have it directly connected to a printer running Windows 7, 64 bit.
I have 2 other computers on the netwrok running Windows 7, 32 bit.
I have an F4180 directly connected to a PC with Windows 7, 64 bit. I've installed the Windows 7, 64 bit drivers on the directly connected PC and everyting works fine on that computer.
Am I supposed to use the install additional drivers thing and install the Windows 7, 32 bit driver on that PC too so that the Windows 7, 32 bit PCs can properly print?
Or do I install the Windows 7, 32 bit driver on the other PCs themselves?
Whether I install the 32 bit drivers on the 32 bit PCs or not, it doesn't seem to matter. Both of the printers do print fine, but when I click on customize your printer and then preferences, I get a windows protection fault error. So, from the remote PCs, I can't change the print quality and that kind of things.
What's the right way to be doing this all?
This question was solved.
View Solution.

OK, the solution was written for the case of sharing a printer from a 64 bit machine to a 32 bit machine, so the instructions may have been confusing for your case. Please do the following: on your 64 bit Windows 7 computer click Start, Devices and Printers, Add a Printer, Local Printer, Create a Port, Local Port, \\Computername\Printername (use the actual share name for the computer and printer), OK, then click on Windows Update and then select HP for the manufacturer and HP Laserjet p2050 series PCL6, Next, Next, Next, Next, Finish.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

I've got a wireless network with one iMac and a Vista PC, on the Vista PC is through USB a printer connected. How can i print from my iMac to that particular printer ?

I've got a wireless network with one iMac and a Vista PC, on the Vista PC is through USB a printer connected. How can i print from my iMac to that particular printer ?

You need to turn on Printer Sharing on both the PC and OS X. I can't help you on Vista but in OS X it's System Preferences - Sharing - check the Printer Sharing box.

I cannot print anymore and get the message /usr/libexec/cups/backend/usb failed", with both imac and my mac book pro

Today, after printing normally, wanted tp print another page with oki ES3640a3 and epson 7900 too.
received the message that the printer stopped, and than
"client-error-not-possible"
and
"/usr/libexec/cups/backend/usb failed"
can anyone help, I am a professional photographer and cannot miss the epson 7900.
I received the messages on my imac OSx 10.5.8
and my mac book pro OS Lion
thanks

Hi, did you restart the printers?
Is there a stuck job in them?
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
Choose System Preferences from the Apple menu.
Choose Print & Fax from the View menu.
Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."
As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

Cisco ISE with both internal and External RADIUS Server

Hi
I have ISE 1.2 , I configured it as management monitor and PSN and it work fine
I would like to know if I can integrate an external radius server and work with both internal and External RADIUS Server simultanously
So some computer (groupe_A in active directory ) will continu to made radius authentication on the ISE internal radius and other computer (groupe_B in active directory) will made radius authentication on an external radius server
I will like to know if it is possible to configure it and how I can do it ?
Thanks in advance for your help
Regards
Blaise

Cisco ISE can function both as a RADIUS server and as a RADIUS proxy server. When it acts as a proxy server, Cisco ISE receives authentication and accounting requests from the network access server (NAS) and forwards them to the external RADIUS server. Cisco ISE accepts the results of the requests and returns them to the NAS.
Cisco ISE can simultaneously act as a proxy server to multiple external RADIUS servers. You can use the external RADIUS servers that you configure here in RADIUS server sequences. The External RADIUS Server page lists all the external RADIUS servers that you have defined in Cisco ISE. You can use the filter option to search for specific RADIUS servers based on the name or description, or both. In both simple and rule-based authentication policies, you can use the RADIUS server sequences to proxy the requests to a RADIUS server.
The RADIUS server sequence strips the domain name from the RADIUS-Username attribute for RADIUS authentications. This domain stripping is not applicable for EAP authentications, which use the EAP-Identity attribute. The RADIUS proxy server obtains the username from the RADIUS-Username attribute and strips it from the character that you specify when you configure the RADIUS server sequence. For EAP authentications, the RADIUS proxy server obtains the username from the EAP-Identity attribute. EAP authentications that use the RADIUS server sequence will succeed only if the EAP-Identity and RADIUS-Username values are the same.

Address labels with BOTH company and name?

I was hoping with Snow Leopard, that Mail would allow one to print address labels with BOTH the company and the name of the recipient.
I can only seem to print one or the other... but not both.
Is is possible to print an address label with both?
This would be a label with 4 lines... doesn't seem like rocket science to do this? What am I missing?
I can do this with Pearlabelizer. But I've tried everything in Mail to no avail.
Even when I print a PDF of a mail list, I can't have both the Company and the Name together. This is very frustrating.
Thanks for any tips...
jn

I see there's a workaround, if you don't have the Company name checked.
I wonder now if there's any way to uncheck the 'company' box from 450 addresses all at once? Or does one do those sorts of things one at a time?
Thanks for any tips!
:0)
jn

Is there a way to get a creative cloud license that works with both Mac and PC platforms?

Is there a way to get a creative cloud license that works with both Mac and PC platforms?

Hi there
A Creative Cloud membership gives you access to both the Mac & Win versions of the desktop applications.
Please check the FAQ for more information: Creative Cloud Help | Creative Cloud / Common Questions
Kind regards
Bev

How to connect an apple tv to an enterprise network with a username and a password? I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

How to connect an apple tv to an enterprise network with a username and a password?
I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

Contact the University's IT dept, they may be able to set something up on the network to allow the ATV to connect without the need for a user name/password.

Print a JTable with several Header and Footers

Hi everybody,
my name is Lothar and I come from Germany. My english is not very well, but I hope you understand me an my problem.
I want to print a JTable, but I want to print a header with several headers and footers.
For example:
h3. Header
h5. 1. Subtitle
h5. 2. Subtitle
Table
h5. 3. Subtitle
h5. Footer
But, I do not know how I can do that. Can anybody tell me, how I can solve my problem. Please, explain for a newbie because I have learned Java since two months ;)
Here the code:
import java.awt.*;
import java.awt.event.*;
import java.text.*;
import java.util.Date;
import javax.swing.*;
public class Beispiel extends JFrame implements ActionListener {
    private JTable table;
    public static void main(String[] args) {
        Beispiel tl = new Beispiel();
        tl.setVisible(true);
        tl.pack();
    public Beispiel() {
        setLayout(new BorderLayout());
        // DruckButton
        JButton print = new JButton("Print");
        add(print, BorderLayout.SOUTH);
        print.addActionListener(this);
        // Tabelle
        add(new JScrollPane(createTable()), BorderLayout.CENTER);
        // schließt das Frame
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    public JTable createTable() {
        // titel
        String[] title = new String[] { "Datum", "Von", "Bis",
                "Dauerinsgesamt", "Bemerkung" };
        // daten
        String[][] data = new String[][] { { "", "", "", "", "" },
        table = new JTable(data, title);
        table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
        return table;
    public void actionPerformed(ActionEvent e1) {
        MessageFormat header = new MessageFormat("Header");
        MessageFormat footer = new MessageFormat("Footer");
        try {
            table.print(JTable.PrintMode.FIT_WIDTH, header, footer);
        } catch (Exception e2) {
            System.err.format("Cannot print %s%n", e2.getMessage());
}

Nobody?
Can nobody solve my problem?

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

Thanks for that. He is one of the last holdouts in IT so an email address for him would just mean I have 2 to check so that is what I am trying to avoid as we move into retirement:)

Sending emails with both body and attachment to multiple recipients

I have a requirement to send email with body and attachment to multiple recipients.
Body of the email is a standard text. It is a proxy-to-mail scenario.
Here is what I've done: (I'm using PI 7.11)
One mapping from Source to Target structure (format of the attachment text file)
Second mapping from Target Structure to Mail Package format.
In the second mapping I'm concatenating the output of first step into "Content" of the Mail Package.
"XIPAYLOAD" is the message protocol used.
The "Keep attachments" option in the Mail adapter allows only to send "Content" as attachment or as body of the email.
How to send an email with both content and text?
The other problem is even with using ASMA, I can't send email to multiple recipients. I can only do CC and TO for 1 person each - a total of 2. Although I can resolve this by creating mailing lists, it is better if this can be addressed in PI.
Thanks for any input you can provide!
Edited by: crazylad on Jan 18, 2012 3:39 PM

Thank you for your response Mikael.
For the first question, I was able to find the solution in the following blog:
XI Mail Adapter : Dynamically building attachment and message body content using a simple UDF
(I just needed to search with the right set of key words )
The key is to set the "Content Encoding" as "None" in the mail adapter. If this is not done, the mail will be sent with an attachment - untitled.bin containing both the mail body and the attachment text. Also, don't forget to check the "Keep Attachments" checkbox in the mail adapter.
Multiple recipients could be added by separating the email IDs with a Comma. I have used ASMA to set the recipients.

External hard drive use with both Mac and Windows

I know that you can't use an iPod (through iTunes) with both Mac and Windows, but can you still use it as an external hard drive with both operating systems?

Yes, if the iPod is in Windows format. Mac OS X can read and write Windows formatted iPods, but Windows can't access Mac formatted disks unless special software is installed.
(9844)

In Creative Cloud, does the $9.99/month Individual Photography plan come with BOTH Lightroom and Photoshop CC?

In Creative Cloud, does the $9.99/month Individual Photography plan come with BOTH Lightroom and Photoshop CC? It is not very clear on the home page. It shows both and mentions both, but doesn't specifically say BOTH come with the monthly $9.99/month plan. Can somebody clarify?

Special Photography Plan
http://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html

Form report with both edit and column link

hi experts,
How can we create form report with both edit and column link. Ie, the form should have both the Edit link and column link. When we click on the edit link(in page1) it should go for the page2 and the page2 should display the corresponding row fields which should be editable. but when i click the column link it should bring me to the next page but the corresponding values of the column should not be editable.
Regars,
KK

hi,
Here i have achieved this by making the column link and page navigation.

How can I hook up an epson scanner (2480/2580) via USB/Firewire hub- APEBS and be able to operate the scanner with both laptop and desktop computer?

My Artisan50 works in this configuration currently!

You can't scan to a device connected to the base station's USB port. Devices other than computers with both USB and FireWire ports don't provide any crossover between the technologies unless specifically noted in their description.
(58440)

Printer on Network with both Win 7 32 and 64 bit PCs

Similar Messages

Maybe you are looking for