Printer on & off w/ lights, stopped printing, Blue screen appears with "B853B1F4"

HP Photosmart C7280 All-in-one stopped working, tried powering on & off, unplugging & plugging back in.  Then sometimes shows "Ink System Failure" Error:  0xc19a0005,  or Blue screen appears with "B853B1F4"
Is it fixable or should i trash it & purchase a new one?

The troubleshooting steps in this page may help.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • HT4177 My mackbook pro suddenly freezed and when I swiched off and on again, a grey screen appeared with an apple logo then a loading circle underneath, and after a few hours, a blue screen appeared. What shall I do with this?

    My mackbook pro suddenly freezed and when I swiched off and on again, a grey screen appeared with an apple logo then a loading circle underneath, and after a few hours, a blue screen appeared. What shall I do with this?

    What operating system version, and do you have any backups of your data off the machine? TimeMachine? Option Key bootable clones? Storage? DVD's?
    A reinstall of the operating system may be in order as a last resort, so if any of these steps on these links get you into the machine, make sure to backup your personal data (Music, Pictures, Documents, Movies) off the machine to a non-encrypted  powered external drive regular storage drive (not TimeMachine as it might be corrupted too) and disconnect as soon as possible.
    Good Luck and report back all what you tried.
    Also report what change occured before this tragedy happened, was there a  Software Update? A EFI firmware update? Etc.
    https://support.apple.com/kb/TS3148
    more:
    https://support.apple.com/kb/TS2570
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/8963.html
    To boot off the 10.6 install disk, hold c or option key while the disk is in the machine.
    To boot into 10.7 Recvoery mode, hold the command and r keys down while booting.
    To use Safe mode, hold down the Shift Key while booting.
    Other assistance
    https://support.apple.com/kb/HT3964
    https://support.apple.com/kb/HT1379
    https://support.apple.com/kb/ht1782
    https://support.apple.com/kb/HT1564

  • I have ipad 2. Safari stopped working. Screen appears with light gray cover. Some websites show errors when debug is on. But how actually can I debug or fix it? Thank you.

    I have ipad 2. Safari stopped working. Screen appears with light gray cover and is frozen. Some websites show errors when debug is on.
    But how actually can I debug or fix it? Thank you.

    Here are a couple suggestions:
    1.  Go into Settings > Safari and Clear Cookies Clear Cache
    2.  Fully close Safari:  from your home screen, double tap your home button and the most recently used Apps will show up.  Hold your finger on the Safari App until all Apps start jiggling.  You'll see a minus sign on the upper left side of Safari.  Touch the minus and Safari will fully close.  Touch your home button again to stop apps from jiggline, then touch your home button again to return to your home page.
    3.  Reboot your iPad:  Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider) until the Apple Logo appears, then let go of both buttons and your iPad will restart, but no data or settings will be lost.
    After iPad comes back up, try Safari again, and you should be good to go.

  • Hi my IPhone 5s  was turned off, the red and the blue screen appeared. After flashing  iTunes connectivity options into What should I do?

    Hi
    My iphone 5s was turned off.
    Showing red & blue on the screen.
    It show apple mark then i have to conect cable to the iTunes.

    Iphone is geting hot & battery is low

  • When I turn on my Macbook, only a blue screen appears with no Dock or info in the menu bar

    When I went to turn on my Macbook OS X today, only a blue background showed up. For some reason the only program that opened was Bittorrent and besides that in the menu bar at the top there is nothing on the screen. The dock wont appear even if I hold my mouse down over where it should be. There is no time display in the menu bar. I can open single applications at a time by clicking on the apple icon in the left corner of the menu bar and selecting "recent items" but other than that nothing else works. When I go into "system preferences" and try to click different display options for the dock and menu bar such as the clock, it won't let me select it.
    I tired booting up the computer in "safe mode" and everything was fine, but then when I went to do a regular start up the same problem occurred.
    Has any one else seen this problem.

    Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor.  Please use copy and paste as screen shots can be hard to read.
    Etrecheck – System Information

  • HP4501e "print spooler off" error after installing printer update

    Motorola Android OS, getting "print spooler off" error after installing printer update... have rebooted both printer and phone to no avail... any help ideas?

    Loralee,
    ??  I am sorry the computer is not working.  I don't work for HP and cannot comment on lawsuits or other calamities.
    If the notebook worked prior to an update -- and this is an entirely different can of worms and problems -- and you think that there is any chance the notebook is just in some sort of "tangled" state and not completely hosed for some reason, you can try the following non-lethal device reset:
    Create a Restore Point:   Create a Restore Point – Win7 OR  Create a restore point Win8
    If you are using a Notebook:
    Close all your programs and shut down the computer
    Disconnect everything (little Unifier for the keyboard / external mouse can stay)
    Perform the Hard Reset for your notebook model
    Boot the computer and log in
    Reminder:  Hard Reset is just a device Reset.  The procedure does not wipe out your files nor does it destroy your Windows setup in any way.  This type of reset "clears the cobwebs". Depending on the root cause of the problem, this procedure can fix a variety of computer glitches.
    This does not fix severe Operating System errors -- it is just a device reset.  It can fix minor problems that updates sometimes cause.
    ============================================================================
    I am sorry you are having so much trouble.
    Other help:
    HP Mobile Printing
    You can call HP for help --
    Contact HP – USA - Phone Assistance
    List of
    HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
    Warranty Required – USA and Canada
    USA – Contact HP // Self-Help – Email - Chat
    Happy New Year, Loralee!  I know it seems to be getting off to a rocky start!
    Click the Kudos Thumbs-Up to show you appreciate the help.
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Click Accept as Solution when the Answer provides a Fix or Workaround!
    Kind Regards,
    Dragon-Fur

  • STOP ERROR - Blue Screen - on Lap Top - Fixed, tear1, support rocks!!!!!!

    New Iphone, and new laptop, installed itunes Noprob,
    Hooked Iphone to usb laptop found Iphone and installed and activated Noprob,All systems go, I am loving it.
    I then ejected my Iphone and hooked up my Ipod to transfer purchesed music and shows transfered Noprob, so I eject my Ipod to hook up my Iphone to put my purchesed music on it.
    THATS when it happened.
    STOP ERROR- Blue screen,cpu restarted on its own.
    I deleted itunes and I deleted camradrives, printer drivers.
    I tried allmost everything and still got the same blue screen.
    To make a long story shorter I called apple talked to the (now this is important) Iphone/Itunes department they are seperate but have a div. that works as one but you have to ask for the department that takes care of both or you will talk to both or 3 or 4 other dept.
    Tear 1 Support had me do a soft reset on my phone it did not work so I backed up my phone # and they showed me how to do a compleate reset and it worked.
    I have been Error and blue screen free for 2 days and I feel very posative about the future with my relationship between my cpu and my phone
    Thank you for your time.
    I hope I help some one I found no relief here with my problem but its a great resource for information
    GOD BLESS TEAR 1 SUPPORT YOUR TEAM ROCK'S
    Pro-Iceman
    Anacotes,Wa

    You don't need to upgrade your software.  But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
    If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3.  It's easy to use in DW CS4, 5, 6 or CC.  More importantly, it's bullet proof and works in all devices. 
    Pop-Menu  Magic3 by PVII (commercial DW extension)
    http://www.projectseven.com/products/menusystems/pmm3/index.htm
    If you don't have a budget to work with, you can roll your own menus with jQuery plugins.  A bit more effort on your part, but they perform better than Spry.
    jQuery Superfish
    http://users.tpg.com.au/j_birch/plugins/superfish/
    jQuery MegaMenu2
    DEMO:
    http://www.geektantra.com/projects/jquery-megamenu-2/
    DOWNLOAD:
    http://code.google.com/p/jquery-megamenu/
    Nancy O.

  • P7N SLI - PC suddenly stops or 'blue screens'

    I been running Windows 7 for some time using this MB using both PATA & SATA as the boot drive.  However, running Adobe Lightroom v4, I noticed that it was running a tad slow using the PATA drive & switched over to the SATA drive which is when things became unstable with the system either just stopping or 'blue screening' - the infamous Windows 'blue screen of death'.
    I attempted a clean build of Windows 7 but it 'blue screened' just after the installation process.  I've tried 2 other SATA drives with the same result so it can't be a faulty SATA drive.
    If I boot from PATA, it runs without any of the problems that affect the SATA boot and I can read/write at will to & from the SATA drives.
    Another problem which I think is related, is that when I added another SATA drive to the system, the PC would not boot, there was an almost continuous beep from the bios.  I noticed that there was no screen, so I removed the video card, reseated it and re-booted whereupon there was an error message to say the the the MB had been overclocked beyond it's capabilities & MB would be reset with default settings.  Strange, 'cause I've never overclocked the system.
    To my mind, it looks like the SATA interface is playing up but what I don't understand id why I can still read/write to them.
    Any help or advise greatly appreciated as it looks as though I'm going to have to replace this MB at some stage but am not too keen to loose the PATA / SATA support that is missing from newer 775 MBs.

    My situation went from bad to worse.
    Having run the simplified system for a day without problems, I decided to add in the SATAII  DVD-RW drive & SATA III 2T HD (jumpered to limit file transfer to 3G/s) using the supplied power & data cables.  Switched on, both drives were immediately recognised but the DVD RW drive drawer would not open - light was on but it would not respond (cable was seated correctly on the back of the drive).  Switched off, tried a different cable & it worked fine for a short period of time before the system immediately shut down with no warning.  Switched back on & it blue screened.  Changed over to my trusted PATA boot drive & it also blue screened.
    Despair at this point set in & the system was left.
    I decided to check each Memory stick in each memory slot using Memtes86 v4.2 with inconsistent results - even Windiag would just freeze, then the system would shut down; checking the processor temp, it was 50degC.
    I left the system overnight & repeated the memory test but the system would still shut itself down.  Did a recheck on the CPU temp & it was 87degC climbing to 94degC, then 101degc before shutting down.  Checked the processor heat sink to see how hot it felt & found that it had become dislodged from the MB - that explained the high temperature.  Re-seated the heat sink making sure that it was locked into position.  Started a re-test of the DIMS in each slot to find that slot 3 would pass all 4 DIMMS.  Repeated tests again were inclusive.
    Looking at the MB fixings, there were 2 positions where they hadn't been fitted; presumably because I didn't have enough at the time & they were of a special type that pushed into a square cutout in the chassis.  Having built 2 systems recently for friends, I found some spares which I fitted to strengthen the support in the area of the RAM & processor believing that flexing of the MB had been responsible for the cooler becoming dislodged.
    I've put all DIMMs back in with 1 SATA II HD & 1 PATA DVD RW and booted the system up which appears quite stable at this point.  I ran the Windows Memory Diagnostics program, rebooted the PC, it did a full 2 pass memory test & reported no errors.  Not quite the same as running memtest86 but I'm going to leave it like this to see how it performs before adding the other bits back in.
    Coming back to the cable problem, it was adding a new drive with a previously unused cable that came with the power supply which started all my problems.  I rang these cables out & the only thing that I noticed is that the 0V was swapped over on the 2 SATA power plugs which would mean that the 5V on one would get it's return on the 0V return from 12V and the 12V would get it's return form the 0V on the 5V supply - this needs further investigation before I reconnect things.
    I'm not 100% satisfied that I've identified the problem, but the processor cooler clearly was not fitted correctly or it would not have come loose!

  • Blue screen appears on Windows HP G56. ***STOP: 0x000000F4

    Blue screen appears at random times ... 
    Product name: HP G56 Notebook PC
    Product number: XP267EA#ABU
    Message reads: 
    If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing.
    ***STOP : 0x000000F4 (0x0000000000000003, 0xFFFFFA8U06F32B30, 0XFFFFFA8006F32E10, 0XFFFFF80002F94660)
    I've already put it back to factory image setting and updated all the updates so could someone please tell me what i can do. 

    Blue screen appears at random times ... 
    Product name: HP G56 Notebook PC
    Product number: XP267EA#ABU
    Message reads: 
    If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing.
    ***STOP : 0x000000F4 (0x0000000000000003, 0xFFFFFA8U06F32B30, 0XFFFFFA8006F32E10, 0XFFFFF80002F94660)
    I've already put it back to factory image setting and updated all the updates so could someone please tell me what i can do. 

  • Does anyone elses iPhone 5 just randomly shut off or freeze on a blue screen after only having it for a week??

    I got a white 16G iPhone 5 last Sunday (Jan 6th 2013) and I have already been on the phone with apple once and in the store twice about this issue. The phone randomly shuts itself off or freezes on a blue screen for 5-30 minutes at a time. Apple reset my phone thinking that would fix the issue, it didnt. I went into the Sherway location while it was frozen and they told me i couldnt get an appointment until tomorrow so ill have to wait... I'm hoping that they just gave me a dud of a phone and that when i go back in tomorrow they will just give me a new phone because this is getting ridiculous. if this problem continues once they finally give me a new one than i suggest that no one else buys the iPhone 5. I had the 4 and had only one problem in a year and a half, and i've had more in one week with this model. Let me know if anyone else is experiencing this too or if my phone is just a dud.

    First I would try restoring from your backup. If that does not work I would restore to factory-new condition and manually add apps and other things back on since there may be something corrupted in your backup.

  • My phone is switched off and then shows a blue screen, then yellow then white, can u help me?

    Iphone 5s is switched off and then shows a blue screen, then yellow then white

    I just experienced this exact same issue with my early 2011 15" macbook pro. Since like a month after purchasing it I had issues with the screen randomly going dark on me. I sent it in for repair inder waranty they replaced the gpu and logic board but I continued to have the same issues with the screen randomly going black sometimes I would need to reboot it in order to get the screen to go back on but it happened so infrequently and I used the computer for school so disnt find the time to resend it in to apple. Just last night the screen started to display the blue screen with black verticle lines on it. I called apple and explained to them  the issues that had been ongoing since I purchased the laptop but they said because I was now outside of warantee that any repairs at thia point wouldn't be covered. Fml so glad I spent 2200 on this future proof macbook pro what a joke my sister purchased a toshiba laptop for 300 4 years ago and it still running like a champ. I loved my macbook but at the price I paid I expect it to last longer than 2 years before leaving me high and dry. *** apple??

  • Blue screen appears on startup and at shutdown

    A few months ago, I bought a macbook pro and it was doing fine. But recently, every time it starts, a blue screen appears for a split second then it goes to log- in. Then, every time I shutdown, it will also show up for a split second then shutdown. It doesn't affect the computer but I'm just wondering how to stop it.

    I couldn't rember what time it started so, I shut down my computer and the blue screen appereed at 8:39:28. But went I turned it on, the blue screen did not show. So, I turnned it of and on again and no blue screen. I did it several times and now the blue screen isn't showing. But I will post the test that showed in the concel during 8:39, when it powered of blue, to the time I powed it on, when the blue screen did not show. If you need more, I will try to give it to you. I'll post again if it shows up again. Also I  should edit out ethernet address too right?
    Here's what its says:
    8:38:07 PM kernel: I0Surface: buffer allocation size is zero
    8:38:47 PM kernel: I0Surface: buffer allocation size is zero
    8:39:28 PM mds: (Error) Server: ==== XPC handleXPCMessage XPC_ERROR_CONNECTION_INVALID
    8:39:28 PM com.apple.launched.peruser.501: (com.apple.talagent.[236]) Exited: Killed: 9
    2/19/12 8:39:28.145 PM
    com.apple.launchd.peruser.501
    ([0x0-0x18018].com.apple.iTunesHelper[284]) Exited: Killed: 9
    2/19/12 8:39:28.145 PM
    com.apple.launchd.peruser.501
    ([0x0-0x13013].com.apple.AppleSpell[260]) Exited: Killed: 9
    2/19/12 8:39:28.147 PM
    com.apple.launchd.peruser.501
    (com.apple.mdworker.pool.0[452]) Exited: Terminated: 15
    2/19/12 8:39:28.203 PM
    loginwindow
    DEAD_PROCESS: 36 console
    2/19/12 8:39:28.467 PM
    shutdown
    halt by ___________:
    2/19/12 8:39:28.467 PM
    shutdown
    SHUTDOWN_TIME: 1329701968 466888
    2/19/12 8:39:54.000 PM
    bootlog
    BOOT_TIME 1329701994 0
    2/19/12 8:40:06.000 PM
    kernel
    PMAP: PCID enabled
    2/19/12 8:40:06.000 PM
    kernel
    Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
    2/19/12 8:40:06.000 PM
    kernel
    vm_page_bootstrap: 986092 free pages and 54292 wired pages
    2/19/12 8:40:06.000 PM
    kernel
    kext submap [0xffffff7f8072f000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072f000]
    2/19/12 8:40:06.000 PM
    kernel
    zone leak detection enabled
    2/19/12 8:40:06.000 PM
    kernel
    standard timeslicing quantum is 10000 us
    2/19/12 8:40:06.000 PM
    kernel
    mig_table_max_displ = 73
    2/19/12 8:40:06.000 PM
    kernel
    TSC Deadline Timer supported and enabled
    2/19/12 8:40:06.000 PM
    kernel
    AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    2/19/12 8:40:06.000 PM
    kernel
    AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    2/19/12 8:40:06.000 PM
    kernel
    AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    2/19/12 8:40:06.000 PM
    kernel
    AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
    2/19/12 8:40:06.000 PM
    kernel
    AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
    2/19/12 8:40:06.000 PM
    kernel
    AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
    2/19/12 8:40:06.000 PM
    kernel
    AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
    2/19/12 8:40:06.000 PM
    kernel
    AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
    2/19/12 8:40:06.000 PM
    kernel
    calling mpo_policy_init for TMSafetyNet
    2/19/12 8:40:06.000 PM
    kernel
    Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    2/19/12 8:40:06.000 PM
    kernel
    calling mpo_policy_init for Sandbox
    2/19/12 8:40:06.000 PM
    kernel
    Security policy loaded: Seatbelt sandbox policy (Sandbox)
    2/19/12 8:40:06.000 PM
    kernel
    calling mpo_policy_init for Quarantine
    2/19/12 8:40:06.000 PM
    kernel
    Security policy loaded: Quarantine policy (Quarantine)
    2/19/12 8:40:06.000 PM
    kernel
    Copyright (c) 1982, 1986, 1989, 1991, 1993
    2/19/12 8:40:06.000 PM
    kernel
    The Regents of the University of California. All rights reserved.
    2/19/12 8:40:06.000 PM
    kernel
    MAC Framework successfully initialized

  • Tecra 9100, a blue screen appears

    When I start up Novell GroupWise on my Tecra 9100 a blue screen appears? Very weird. Can anyone help me to stop this.

    ditto--happened on my machine too. I found out that this blue screen can appear if True Color (32 bit) is selected under Colors in Display Properties. Both of you will have to download the update for the Display Driver from the Toshiba support pages. There is a txt file provided for instruction

  • Blue screen appears

    I've bought my S10e in April 2009. it worked properly until a month ago when i was browsing, this blue screen appears suddenly and Windows (XP SP3, home edition) restarts. It happens too fast that i cannot read the message. after logging in this message rises: the system has recovered from a serious error.... and i send the issue to Microsoft. I use Google Chrome as browser. I think when i'm online using WiFi, it happens. I uninstalled chrome but it happened again with Firefox when it tried to open a web page reporting the problem to Microsoft.
    I used the check disk tool in Windows but didn't help. I've two drives, Windows run on C: capacity=30 GB, free space=4 GB.
    I've run CCleaner to optimize registry before these blue screens.
    I also have Kaspersky Internet security installed on my netbook. it works fine.
    I've got all Microsoft updates.
    Is it the problem of bios? or what?
    please help me because i'm very dependent on my S10e.
    Thanks

    Hi and welcome,
     ... if that happen again.. look in system event log file...there could be a hint whats going wrong..
    How to view and manage event logs in Event Viewer in Windows XP
    on the first look ...your free space 4GB ... .. due huge temp data near full .. keep an eye of this ...
    sincerely KalvinKlein  
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • When i try to open a web page, a blue screen appears and it is telling me " safari cannot open the page because i am not connected to the internet. i have an iphone, no problem and a laptop with connection - no problem - not sure what the trouble is.

    when i try to open a web page, a blue screen appears - message says - sarfari cannot open the page because it is not connected to the internet. i have an iphone - no proble and a laptop - no problem as well.
    what is wrong?

    There are other things that need attention:
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Shockwave Flash 10.0 r32
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

Maybe you are looking for