Printer out of use for prolonged period-any special precautions?

I may need to "lay up" my Photosmart C5180 All in One for about 3 months. I am concerned that during this prolonged period of not being used,the printer heads will clog up. Is this a likely outcome and if so can you flush them out with a cleaning fluid or similar beforehand,or even after if blockage has occurred. (I see noo such item listed by HP as being available.) My printer is reasonably new and I still use original HP inks

Similar Messages

How to store printer when not used for extended period.

Printer will remain in unheated summer cottage. I plan to remove print head with cartridges for storage in a heated home. Will the cartridges dry out and/or would ink congeal in printhead as one instruction says not to remove cartridges until ready to replace with new. Any suggestions?

Printer will remain in unheated summer cottage. I plan to remove print head with cartridges for storage in a heated home. Will the cartridges dry out and/or would ink congeal in printhead as one instruction says not to remove cartridges until ready to replace with new. Any suggestions?

Kinect for Windows v2 cannot reliably remain online for prolonged periods

We are developing a .NET 4.5 app that records Kinect frame streams to a huge disk array, 24/7. However, it appears that a vanilla installation of the Kinect cannot remain online for prolonged periods. After a day or so, frames simply stop arriving for no
apparent reason. There is nothing in the Windows Events Viewer that seems related; Device Manager also does not show any problem for the Kinect devices.
Could somebody look into this issue?
We have just disables power management on the whole chain of hardware (PCI express -> USB 3.0 controller -> Kinect) and will see if it helps.

Are you using any custom code to write the Kinect Frames to disk? or are you using Kinect Studio?
If using your own custom code, check to make sure you're releasing all frames (Disposing them) appropiately. Not doing so, even in the most subtle way could easily cause this behavior.
Sr. Enterprise Architect | Trainer | Consultant | MCT | MCSD | MCPD | SharePoint TS | MS Virtual TS |Windows 8 App Store Developer | Linux Gentoo Geek | Raspberry Pi Owner | Micro .Net Developer | Kinect For Windows Device Developer |blog: http://dgoins.wordpress.com

Sapscript - print out seperate labels for multiple delivery items

Hello,
we do have an output type that prints barcode labels for deliveries (VL02n).
Now if there are more than one delivery item on the delivery, it will only print out a label for the first item.
How can I trigger that all items will be printed out on a seperate label each?
thanks
Anne

Hi,
Just open the script which prints the lables and check for the variable name used for label printing
Check the script for variables and pass the value to that avriables and those to be declred in your print/driver program.
when you call write_from in the loop there you give a window name what ever the value in the variable it will pass to script
Regards
Krishna

Print out in MB90 for GRN is not coming in English

Dear Friends,
While taking the print out in MB90 for GRN document, it is not coming in English.It is coming in some unreadableformat.
In MN21 I have mentioned the language as EN.
In the configuration of output type WE03 I have mentioned the language as EN intransaction code M706.
A reply will be highly appreaciated.
Regards
Rutabhadra Panda

hi
check whether the printer you installed is having the proper driver.

How do I print out a receipt for my subscription

how do i print out a receipt for my subscription

Hi benitaroth,
Please see Manage your membership and payments | Creative Cloud. You can find instructions for printing your receipt in the Payment & Credit Cards section.
Please let us know if you have additional questions.
Best,
Sara

Left outer join using For All Entries

how to implement left outer join using for all entries In REPORTS.

hi Mansi,
this is how i populate
SELECT VGBEL LFIMG POSNR VBELN FROM LIPS INTO TABLE IT_delv FOR ALL ENTRIES IN IT_VBAP WHERE VGBEL = IT_VBAP-VBELN.
LOOP AT IT_delv INTO WA_delv.
WA_FINAL-VBELN_1 = WA_DELV-VBELN_1.
WA_FINAL-LFDAT =   WA_DELV-LFDAT.
WA_FINAL-LFIMG   = WA_DELV-LFIMG.
WA_FINAL-POSNR2 =   WA_DELV-POSNR2..
APPEND WA_FINAL TO IT_FINAL.
CLEAR: WA_FINAL , WA_delv.
ENDLOOP.
LOOP AT IT_FINAL INTO WA_FINAL.
READ TABLE IT_vbap INTO WA_vbap WITH KEY VGBEL = WA_FINAL-VBELN.
WA_FINAL-VBELN = WA_VBAP-VBELN.
WA_FINAL-MATNR = WA_VBAP-MATNR.
WA_FINAL-KWMENG = WA_VBAP-KWMENG.
WA_FINAL-NETWR = WA_VBAP-NETWR.
MODIFY IT_FINAL FROM WA_FINAL.
ENDLOOP.
My question is , it_vbap has 5 five records A,B,C,D,E.
in it_delv ,there are 20 record corrresponding to A,B,D of IT_VBAP.
in final table i wont get info of recors B,E. I want those info also in final table ..how can i do that...

Any special precautions needed to prevent open relay?

Hi, we turned on the mail server on our os x server 10.4.7 machine and have started learning how to setup and manage our email server.
Is there any special precaution / setup we need ot do to ensure we do not unwittingly become an "open relay" for spammers?
Or does the default behavior after an install take care of that?

greetings
postfix by defaultis not open for relay. The settings in your /etc/main.cf files will determine what is any other machines you will allow to relay.
mynetworks_style and mynetworks determine what other systems can relay.
set mynetwork_style to host to limit relaying to just your local machine. Add ip addresses to mynetworks to allow specific clients to use your smtp server.
hope this helps

Print out Format Modification for Orders & Notifications

Dear All,
I need to create new Print out format for Order & Notification.
Can any body suggest what will be the necesary config settings need to be done after creation of new Print out form & how i can achieve it?
Regards
Dhiren

Dhiren,
After creating a new form,please follow the below steps..
1) Use transaction OIDF to create a New shop paper by copying a existing shop paper (Which suits your needs). Replace the SAP Script form with your new form and try to keep the same standard program. 2) Use transaction OIDG to assign the shop paper to order type.
Use transaction OIDA and OIDB to do the same two steps for the Notification.
Regards
Narasimhan

GR slip print-out & automatic default for the print tick

Hi,
I have followed the steps as outlined below for the solution and unfortunately the GRN document do not print as anticipated. I was wondering if the non-assignment of the MM or FI Program might be the cause? Please advice if I had missed something to allow this to print immediately.
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, (for returns use WE03) ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
Edited by: JML Nkgapele on Dec 1, 2008 11:10 AM

Your answer did help but still expriencing challanges with the following:
Output Types
-Print Parameters options are as follows
    >Plant/Storage location
    >Plant/Storage location/User group
    >User exit
   >User parameters
   >User
Please advice which of the above is appropriate?
-Should there be a program reflected on change output field for General data screen?
Please advice since I'm currently experiencing shotdumps(runtime errors) when processing the GR.

Print out multiple copies for next page in sapscript

Hi All,
For check printing the client wants the next page with item data to be printed out twice, while the first page along with the check will be printed out on a pre-printed paper. Can anyone advice me on this.

hi,
IF &PAGE& EQ 1
"do write what all you need to print in First page
ELSE
"write what all necessary you want to print from second page onwards..By this first page will not print in Second Page
ENDIF.
IF &NEXTPAGE& EQ 0
"This Means it is last Page write footer or any comments in Last Page
ENDIF.
Prabhudas

Output(print out) in SRM for backend PO in Classic scenario

Hello,
My requirement is to take print out for the backend PO created thru shopping cart in classic scenario.
i know for extended classic scenario Actions works as in that case PO is created locally and then replicated.
But in the classic Scenario where the PO is in backend, can we take print out in SRM becasue the detials of that Po is available in SRM to in Fllow up documents in SRM 5.0.
is there any standard way available to achieve that.
Thanks
Robin

Hi Sarabjeet,
It does not make sense to print PO from SRM in classic scenario because there is no PO in SRM at all !
In classic scenario, PO is created only in the backend.
Only shopping cart is created in SRM.
Kind regards,
Yann

I am unable to print out a receipt for a purchace from the ITunes app

I am unable to print a receipt from a purchase while in my ITunes account I select print and the window comes up with a blank page to print out
I tried a Safe Boot with the Macbook Pro ( Yosemite ) and restart and shut down and reboot no luck
But I am able to print out account summary and play lists while in ITunes
I tried to find the option on my IPHONE 4 and 6 but I could not find anything to print out with the order # for the gift I sent

But, I'm not on your computer.
So you're saying that from within Adobe Reader, you are using File>Print and instead of printing it wants you to save as a file? If so, look around the print menu and find "Print to file" and deselect it.
If that's not it, can you please give us some more details about what actually is happening?

How to make it repleatedly printed out by using timer??

Dear Friends:
I have following code to run, When I press R to repeat println, only 1 line print out,
But I hope to make it continueously print out.
How to make it repleatedly printed out until I press CTRL + C key ??
Thyanks
import java.util.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.*;
public class CertainAndRepeatTime{
public static void main(String[] args) throws IOException{
    int delay = 1;
    Timer timer = new Timer();
    ActionListener actionListener = new ActionListener() {
        public void actionPerformed(ActionEvent actionEvent) {
          System.out.println("Hello World Timer");
    System.out.println("What do you want (Certain time or Repeat time)?");
    System.out.print("Please enter \'C\' or \'R\' for that: ");
    BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
    String ans = in.readLine();
    System.out.print("Please enter ans=" + ans + " IsTrue= " + (ans.equals("R") || ans.equals("r")) +"\n");
    if (ans.equals("C") || ans.equals("c")){
      //System.out.println("This line is printed only once start...");
      timer.schedule(new TimerTask(){
        public void run(){
          System.out.println("This line is printed only once.");
      },delay,1);
    else if(ans.equals("r") || ans.equals("R")){
      timer.schedule(new TimerTask(){
        public void run(){
          System.out.println("This line is printed repeatedly.");
      },delay, 1000);
    else{
      System.out.println("Invalid Entry.");
      System.exit(0);
    System.exit(0);
}

The Timer is working fine, but because it runs in another Thread, your program is ending before the Timer can repeat.
The simplest way to make your program wait until it is force-quitted as you describe would be to make an infinite loop (although this isn't very good practice), like this:
    else if(ans.equals("r") || ans.equals("R")){
      timer.schedule(new TimerTask(){
        public void run(){
          System.out.println("This line is printed repeatedly.");
      },delay, 1000);
    while(true){} //This will make your main thread hang.
    }A better way, though, would be to listen again with your System.in reader until they enter a letter that means quit.

How to print out answers using the form I created

I created an application form for my company. People have submitted their applications, but I do not know how to print them out.
Is there a way to copy the answers into the form and print that? Or something like that?
I cannot just print the answers because it's over 100 pages and would be disorganized.
I basically just need to know how to print out the form I created with the respondants answers.
Thanks

Here is what you can do...
Open the form file
Go to the View Responses tab
Select the View menu in the upper right corner of the UI
Select the Details View menu item on that menu
The Details View pane will open on the right side of the window
At the bottom of that pane there is a set of buttons
The first button let's you print the detail view of the currently selected response
The last button labeled Export will create a PDF file of the selected response
Is that what you were trying to accomplish? I'll admit that we need to make print and export to PDF more discoverable and easier to get to - that was too many steps
Randy

Printer out of use for prolonged period-any special precautions?

Similar Messages

Maybe you are looking for