Printer output bin
Hi,
we have a printer with multiple output bins. So i want to control the output bin, when i'm printing from any application within the sap system.
How can i do this? I tried to control this with various default settings on the printserver, but this won't work. Do i have to modify print controls?
Is there any chance to do this?
Thanks ahead.
Hi ,
Can u try with this .,
1. Log on to any client in the appropriate SAP system.
2. Go to transaction SPAD.
3. On the Spool Administration: Initial Screen screen, under the Devices\servers tab click the Output devices button. On the Spool Administration: List of Output Devices screen, click on the printer where you need to check the output requests. Then click on the printer and page picture-icon.
4. A list of all pending output requests for the selected printer will be displayed.
PS :reward point if it is useful
regards,
S.rajeshkumar
Similar Messages
-
Printing to a Specific Output Bin
I have been asked to setup an output queue in SAP where all output to that printer goes to a specfic (non-default) output bin on the printer. The printer is a HP 8050 multi-function printer with 5 different output bins. I have determined the PJL and PCL codes to direct the output. My problem is that the output will both be ABAP lists and SAPSCRIPT data so I do not want to start changing specific forms or printer formats. How do I modify the printer device so that all output goes to the proper bin?
Thanks for your reply. I had previously tried the option in SPAD but had no luck. In my research I turned on logging with the test tool in SPAD and captured the PCL code generated. I am not seeing the code being sent from SAP which specifies the output bin destination. I looked for both the PJL code(set outbin=) and the PCL code (esc&l5G) for bin 5. I am running ECC 6. Are there any known issues with this tray option?
-
Printer shows paper jamming in output bin but no paper visible in 2605dn
printer shows paper jam in output bin---have reset and cleared everything---still shows same. What now?
In case you missed something, see this:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00783950
Try a NVRAM reset: (but make sure u save your n/w config 1st)
1. power off the printer
2. holding down the select and cancel buttons and powering on
3. release buttons when display reads "permanent storage init"
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations. -
Laserjet printer p2050 says"output bin is full remove all paper from bin"
Printer will only print 1 or 2 times then I get the error message. I have to pull open the paper drawer & slam it closed to get it printing again
Hi Sharon453,
When you get this error message, do the flaps in the output bin stay up? And does the action of slamming the paper tray shut cause these flaps to fall? It sounds like there may be something sticking that is causing the sensor to think the output bin is full.
I work for HP -
HP LaserJet P1102W - no print output in Linux Mint 17.1 Cinnamon Desktop
I've just done a default install of Linux Mint 17.1 - as feared, no print output.
I'm guessing I need to install a driver - but I couldn't find anything easily on HP site, only Windows/Mac OS stuff. Are HP printers generally linux friendly? Where can I download drivers if they are? More over, I'm a total linux newbie, so any drivers need to be easily installed! I'm not currently familiar with Terminal windows and line commands!
My printer does have wireless enabled, but I have it connected via direct USB also.
Linux Mint did offer to run a diagnostic tool/debugging tool which gave a great deal of what means nothing to me. Debug output is below if it is helpful, but hoping a simple driver install will cure all ...
Debug Output:
Page 1 (Scheduler not running?):
{'cups_connection_failure': False}
Page 2 (Is local server publishing?):
{'local_server_exporting_printers': False}
Page 3 (Choose printer):
{'cups_dest': <cups.Dest HP-LaserJet-Professional-P-1102w (default)>,
'cups_instance': None,
'cups_queue': u'HP-LaserJet-Professional-P-1102w',
'cups_queue_listed': True}
Page 4 (Check printer sanity):
{'cups_device_uri_scheme': u'hp',
'cups_printer_dict': {'device-uri': u'hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W4037X5PR1a',
'printer-info': u'Hewlett-Packard HP LaserJet Professional P 1102w',
'printer-is-shared': True,
'printer-location': u'Leela',
'printer-make-and-model': u'HP LaserJet Professional P 1102w, hpcups 3.14.3, requires proprietary plugin',
'printer-state': 3,
'printer-state-message': u'',
'printer-state-reasons': [u'none'],
'printer-type': 167948,
'printer-uri-supported': u'ipp://localhost:631/printers/HP-LaserJet-Professional-P-1102w'},
'cups_printer_remote': False,
'hplip_output': (['',
'\x1b[01mHP Linux Imaging and Printing System (ver. 3.14.3)\x1b[0m',
'\x1b[01mDevice Information Utility ver. 5.2\x1b[0m',
'Copyright (c) 2001-13 Hewlett-Packard Development Company, LP',
'This software comes with ABSOLUTELY NO WARRANTY.',
'This is free software, and you are welcome to distribute it',
'under certain conditions. See COPYING file for more details.',
'\x1b[01mHP Linux Imaging and Printing System (ver. 3.14.3)\x1b[0m',
'\x1b[01mSystem Tray Status Service ver. 2.0\x1b[0m',
'Copyright (c) 2001-13 Hewlett-Packard Development Company, LP',
'This software comes with ABSOLUTELY NO WARRANTY.',
'This is free software, and you are welcome to distribute it',
'under certain conditions. See COPYING file for more details.',
'\x1b[01mhp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W4037X5PR1a\x1b[0m',
'\x1b[01mDevice Parameters (dynamic data):\x1b[0m',
'\x1b[01m Parameter Value(s) \x1b[0m',
' agent1-ack False ',
' agent1-desc Black toner cartridge ',
' agent1-dvc 0 ',
' agent1-health 0 ',
' agent1-health-desc Good/OK ',
' agent1-hp-ink False ',
' agent1-id 0 ',
' agent1-kind 4 ',
' agent1-known False ',
' agent1-level 100 ',
' agent1-level-trigger 0 ',
' agent1-sku 85A ',
' agent1-type 1 ',
' agent1-virgin False ',
' back-end hp ',
" cups-printers ['HP-LaserJet-Professional-P-1102w'] ",
' cups-uri hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W',
' 4037X5PR1a ',
' dev-file ',
' device-state 1 ',
' device-uri hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W',
' 4037X5PR1a ',
' deviceid MFG:Hewlett-Packard;MDL: LaserJet Professional P ',
' 1102w;CMD:ZJSJS,URF,PCLm,PJL,ACL,HTTCLSLSRINTER;DEHPHP ',
' LaserJet Presessional P 110;F;FWVER:20110826; ',
' duplexer 0 ',
' error-state 0 ',
' host ',
' in-tray1 1 ',
' in-tray2 1 ',
' is-hp True ',
' media-path 1 ',
' panel 0 ',
' panel-line1 ',
' panel-line2 ',
' photo-tray 0 ',
' port 1 ',
' r 0 ',
' revision 254 ',
' rg 000 ',
' rr 000000 ',
' rs 000000000 ',
' serial 000000000W4037X5PR1a ',
' status-code 1000 ',
' status-desc Idle ',
' supply-door 1 ',
' top-door 1 ',
'\x1b[01m',
'Model Parameters (static data):\x1b[0m',
'\x1b[01m Parameter Value(s) \x1b[0m',
' align-type 0 ',
' clean-type 0 ',
' color-cal-type 0 ',
' copy-type 0 ',
' embedded-server-type 0 ',
' fax-type 0 ',
' fw-download False ',
' icon HP_LaserJet_1012.png ',
' io-mfp-mode 6 ',
' io-mode 1 ',
' io-support 10 ',
' job-storage 0 ',
' linefeed-cal-type 0 ',
' model HP_LaserJet_Professional_P_1102w ',
' model-ui HP LaserJet Professional P 1102w ',
' model1 HP LaserJet Professional P 1102w Printer ',
' monitor-type 0 ',
' panel-check-type 0 ',
' pcard-type 0 ',
' plugin 1 ',
' plugin-reason 1 ',
' power-settings 0 ',
' pq-diag-type 0 ',
' r-type 0 ',
' r0-agent1-kind 4 ',
' r0-agent1-sku 85A ',
' r0-agent1-type 1 ',
' scan-src 0 ',
' scan-type 0 ',
' status-battery-check 0 ',
' status-dynamic-counters 0 ',
' status-type 8 ',
' support-released True ',
' support-subtype 2202411 ',
' support-type 2 ',
' support-ver 3.12.6 ',
" tech-class ['LJZjsMono'] ",
" tech-subclass ['NoAutoDuplex'] ",
' tech-type 3 ',
' usb-pid 4138 ',
' usb-vid 1008 ',
' wifi-config 3 ',
'Done.',
['\x1b[35;01mwarning: No display found.\x1b[0m',
'\x1b[31;01merror: hp-info -u/--gui requires Qt4 GUI support. Entering interactive mode.\x1b[0m',
'\x1b[35;01mwarning: No display found.\x1b[0m',
'\x1b[31;01merror: hp-systray requires Qt4 GUI and DBus support. Exiting.\x1b[0m',
'\x1b[35;01mwarning: Unable to connect to dbus. Is hp-systray running?\x1b[0m',
0),
'is_cups_class': False,
'local_cups_queue_attributes': {'charset-configured': u'utf-8',
'charset-supported': [u'us-ascii', u'utf-8'],
'color-supported': True,
'compression-supported': [u'none', u'gzip'],
'copies-default': 1,
'copies-supported': (1, 9999),
'cups-version': u'1.7.2',
'device-uri': u'hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W4037X5PR1a',
'document-format-default': u'application/octet-stream',
'document-format-supported': [u'application/octet-stream',
u'application/pdf',
u'application/postscript',
u'application/vnd.adobe-reader-postscript',
u'application/vnd.cups-pdf',
u'application/vnd.cups-pdf-banner',
u'application/vnd.cups-postscript',
u'application/vnd.cups-raster',
u'application/vnd.cups-raw',
u'application/x-cshell',
u'application/x-csource',
u'application/x-perl',
u'application/x-shell',
u'image/gif',
u'image/jpeg',
u'image/png',
u'image/tiff',
u'image/urf',
u'image/x-bitmap',
u'image/x-photocd',
u'image/x-portable-anymap',
u'image/x-portable-bitmap',
u'image/x-portable-graymap',
u'image/x-portable-pixmap',
u'image/x-sgi-rgb',
u'image/x-sun-raster',
u'image/x-xbitmap',
u'image/x-xpixmap',
u'image/x-xwindowdump',
u'text/css',
u'text/html',
u'text/plain'],
'finishings-default': 3,
'finishings-supported': [3],
'generated-natural-language-supported': [u'en-us'],
'ipp-versions-supported': [u'1.0',
u'1.1',
u'2.0',
u'2.1'],
'ippget-event-life': 15,
'job-creation-attributes-supported': [u'copies',
u'finishings',
u'ipp-attribute-fidelity',
u'job-hold-until',
u'job-name',
u'job-priority',
u'job-sheets',
u'media',
u'media-col',
u'multiple-document-handling',
u'number-up',
u'output-bin',
u'orientation-requested',
u'page-ranges',
u'print-color-mode',
u'print-quality',
u'printer-resolution',
u'sides'],
'job-hold-until-default': u'no-hold',
'job-hold-until-supported': [u'no-hold',
u'indefinite',
u'day-time',
u'evening',
u'night',
u'second-shift',
u'third-shift',
u'weekend'],
'job-ids-supported': True,
'job-k-limit': 0,
'job-k-octets-supported': (0, 476568600),
'job-page-limit': 0,
'job-priority-default': 50,
'job-priority-supported': [100],
'job-quota-period': 0,
'job-settable-attributes-supported': [u'copies',
u'finishings',
u'job-hold-until',
u'job-name',
u'job-priority',
u'media',
u'media-col',
u'multiple-document-handling',
u'number-up',
u'output-bin',
u'orientation-requested',
u'page-ranges',
u'print-color-mode',
u'print-quality',
u'printer-resolution',
u'sides'],
'job-sheets-default': (u'none', u'none'),
'job-sheets-supported': [u'none',
u'classified',
u'confidential',
u'form',
u'secret',
u'standard',
u'topsecret',
u'unclassified'],
'jpeg-k-octets-supported': (0, 476568600),
'jpeg-x-dimension-supported': (0, 65535),
'jpeg-y-dimension-supported': (1, 65535),
'marker-change-time': 0,
'media-bottom-margin-supported': [423, 547],
'media-col-default': u'(unknown IPP value tag 0x34)',
'media-col-supported': [u'media-bottom-margin',
u'media-left-margin',
u'media-right-margin',
u'media-size',
u'media-source',
u'media-top-margin',
u'media-type'],
'media-default': u'iso_a4_210x297mm',
'media-left-margin-supported': [423, 635],
'media-right-margin-supported': [423, 635],
'media-size-supported': [u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)'],
'media-source-supported': [u'auto',
u'manual'],
'media-supported': [u'iso_a6_105x148mm',
u'iso_a5_148x210mm',
u'jpn_hagaki_100x148mm',
u'om_double-postcard_148.17x200.03mm',
u'om_jb5_182.12x257.05mm',
u'na_executive_7.25x10.5in',
u'om_16k195x270_195.09x269.88mm',
u'om_16k184x260_184.15x260mm',
u'oe_16k197x273_7.75x10.75in',
u'na_letter_8.5x11in',
u'iso_a4_210x297mm',
u'oe_flsa_8.5x13in',
u'na_legal_8.5x14in',
u'na_monarch_3.875x7.5in',
u'iso_dl_110x220mm',
u'na_number-10_4.125x9.5in',
u'iso_c5_162x229mm',
u'om_env-b5_176.04x250.12mm',
u'custom_min_3x5in',
u'custom_max_17x36in'],
'media-top-margin-supported': [423, 547],
'media-type-supported': [u'stationery'],
'multiple-document-handling-supported': [u'separate-documents-uncollated-copies',
u'separate-documents-collated-copies'],
'multiple-document-jobs-supported': True,
'multiple-operation-time-out': 300,
'natural-language-configured': u'en-us',
'notify-attributes-supported': [u'printer-state-change-time',
u'notify-lease-expiration-time',
u'notify-subscriber-user-name'],
'notify-events-default': [u'job-completed'],
'notify-events-supported': [u'job-completed',
u'job-config-changed',
u'job-created',
u'job-progress',
u'job-state-changed',
u'job-stopped',
u'printer-added',
u'printer-changed',
u'printer-config-changed',
u'printer-deleted',
u'printer-finishings-changed',
u'printer-media-changed',
u'printer-modified',
u'printer-restarted',
u'printer-shutdown',
u'printer-state-changed',
u'printer-stopped',
u'server-audit',
u'server-restarted',
u'server-started',
u'server-stopped'],
'notify-lease-duration-default': 86400,
'notify-lease-duration-supported': (0,
2147483647),
'notify-max-events-supported': [100],
'notify-pull-method-supported': [u'ippget'],
'notify-schemes-supported': [u'dbus',
u'mailto',
u'rss'],
'number-up-default': 1,
'number-up-supported': [1, 2, 4, 6, 9, 16],
'operations-supported': [2,
4,
5,
6,
8,
9,
10,
11,
12,
13,
14,
16,
17,
18,
19,
20,
21,
22,
23,
24,
25,
26,
27,
28,
34,
35,
37,
38,
56,
57,
59,
16385,
16386,
16387,
16388,
16389,
16390,
16391,
16392,
16393,
16394,
16395,
16396,
16397,
16398,
16399,
16423,
14],
'orientation-requested-default': None,
'orientation-requested-supported': [3,
4,
5,
6],
'output-bin-default': u'face-down',
'output-bin-supported': [u'face-down'],
'page-ranges-supported': True,
'pages-per-minute': 1,
'pages-per-minute-color': 1,
'pdf-k-octets-supported': (0, 476568600),
'pdf-versions-supported': [u'adobe-1.2',
u'adobe-1.3',
u'adobe-1.4',
u'adobe-1.5',
u'adobe-1.6',
u'adobe-1.7',
u'iso-19005-1_2005',
u'iso-32000-1_2008',
u'pwg-5102.3'],
'pdl-override-supported': [u'attempted'],
'port-monitor': u'none',
'port-monitor-supported': [u'none'],
'ppd-timestamp': u'*',
'print-color-mode-default': u'color',
'print-color-mode-supported': [u'monochrome',
u'color'],
'print-quality-default': 4,
'print-quality-supported': [3, 4],
'printer-commands': u'none',
'printer-current-time': u'(IPP_TAG_DATE)',
'printer-dns-sd-name': u'Hewlett-Packard HP LaserJet Professional P 1102w @ Leela',
'printer-error-policy': u'retry-job',
Hi @durandal,
I read your post and see that you need the drivers for the P1102w printer. I can provide the website for you.
Here is the link for the HP Linux Imaging and Printing website. HP Linux imaging and printing.
Here is the link for the P1102w drivers. HP LaserJet Professional p1102w Printer.
If you need more information, please post your questions at the Linux Distribution Forums.
If you appreciate my efforts, please click the Thumbs up button below.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Hi all,
I have been using Java to creating graphical reports using JComponent. The printing quality is really good. However, when I try to save it as image, the image quality is HUGHLY deteriorated as I simply can't produce a high enough resolution for printing.
I am thinking of saving it as a PDF from the printer output. I have done a search on JAVA forum but have no luck. Could anyone give me a pointer on how to achieve this?
Thank you all in advance.
Cheers,
Samhi,
According to your title
This is Code to convert Smartfoms to PDF & download to ur PC.
PARAMETERS : p_werks TYPE t001w-werks.
PARAMETERS : p_file LIKE rlgrap-filename DEFAULT 'C:\temp\1.pdf'.
DATA : v_fnam TYPE rs38l_fnam.
DATA : flag TYPE char1.
DATA : file TYPE string.
DATA : mi_bytecount TYPE i.
DATA : lines LIKE tline OCCURS 100 WITH HEADER LINE.
*Control Parameters
DATA : it_ssfctrlop TYPE TABLE OF ssfctrlop.
DATA : wa_ssfctrlop TYPE ssfctrlop.
*Output Options
DATA : it_output_options TYPE TABLE OF ssfcompop.
DATA : wa_output_options TYPE ssfcompop.
*Job Output Info
DATA : it_job_output_info TYPE TABLE OF ssfcrescl.
DATA : wa_job_output_info TYPE ssfcrescl.
*Job Output Options
DATA : it_job_output_options TYPE TABLE OF ssfcresop.
DATA : wa_job_output_options TYPE ssfcresop.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZSAMPLE_FORM'
IMPORTING
fm_name = v_fnam.
wa_ssfctrlop-no_dialog = 'X'.
wa_ssfctrlop-getotf = 'X'.
wa_ssfctrlop-preview = 'X'.
APPEND wa_ssfctrlop TO it_ssfctrlop.
wa_output_options-tdnoprev = 'X'.
wa_output_options-tdtitle = sy-title.
wa_output_options-tdnewid = 'X'.
APPEND wa_output_options TO it_output_options.
CALL FUNCTION v_fnam
EXPORTING
control_parameters = wa_ssfctrlop
output_options = wa_output_options
p_werks = p_werks
IMPORTING
job_output_info = wa_job_output_info
job_output_options = wa_job_output_options.
*Convert to PDF
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
IMPORTING
bin_filesize = mi_bytecount
TABLES
otf = wa_job_output_info-otfdata
lines = lines
EXCEPTIONS
err_conv_not_possible = 1
err_bad_otf = 2.
*Download to ur PC
file = p_file.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = mi_bytecount
filename = file
filetype = 'BIN'
TABLES
data_tab = lines[].
IF sy-subrc = 0.
MESSAGE 'Downloaded Successfully' TYPE 'S'.
ENDIF.
solution is this. -
We have multiple HP Laser Jet 9050's in our building. I cannot seem to make them print to the left side included accessory output bin with any of the 9050 drivers (5e, 6) I have not tried the PS. With these drivers, I get options that do not make sense. In the printer properties the options for enabling the side output bin are not installed, several multibin mailbox options, 2 3000 sheet stackers and HP multifunction finisher. I have tried both 3000 sheet option and the multifunction finisher. Then in the output tab of the options page, lower left bin and upper left bin (Note: there is only one bin)
On the 8150's This worked like a charm. I was able to put selected users to the side tray relieving congestion. Note: I can use the 8150 drivers but do not think I should. There have been multiple questions on the HP site on this issue but no one has adequately answered it.L_G,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
P4515N top output bin question
We are in need of a printer that can output between 1000-1500 pages unattended. We got recommended the P4515N but I am still not convinced the top output bin can hold the 1500 pages. Documentation says output bin max is 600 pages. I just want to make sure the sheets will not be flying over the place. Can someone shed light on this?
Thanks in advance.
Message Edited by CyberGuyPR on 08-13-2009 12:26 PMHi,
Assuming that you are using the Java API then you can use the method here to get the XMLDocument class
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14252/adx_j_xsu.htm#ADXDK070
and then use the capabilities of DOM to strip off the XML declaration, e.g. with getDocumentElement()
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14293/toc.htm
hope this helps
Susan -
Item text is not appearing in the print output through IDOC?
Hello ,
I am changing the PO through IDOC. When ever there is change in the quantity ,net price and delivery date the print out put is generated autoamtically and changes are appearing the print output.
when ever there is change in the item text of PO print output is not generatiing but item text is updated in the PO.
If i change manually print out is generating for item text also but through IDOC print output is not generated . please help to slove this isuue.
i am passing the value as :
idoc_data-segnam = 'E1BPMEPOTEXT'.
e1bpmepotext-po_item = Po line item number .
e1bpmepotext-text_id = txtid.
e1bpmepotext-text_form = textform.
e1bpmepotext-text_line = line item text .
idoc_data-sdata = e1bpmepotext.
APPEND idoc_data.
CLEAR idoc_data.
CLEAR e1bpmepotext.
please help me it is urgent
Thanks
VenkateshHi Venkatesh,
Check the condition record in transaction NACE. Whether the print output field is present in the condition record.
Regards,
Gajendra. -
Background job step - Printer - Output device table
Hi,
When creating background job, printer- output device also specified for every step. Which table to check for job name and output device combination ?
Thanks.Hi Raj check table TBTCP
-
There is no printer output when using the PrintOut method
I have a VB6 app with CR XI, and a customer found a situation that when printing a report directly to the printer using the PrintOut method, there is no printer output or error message.
Some reports using the same code print normally, but a report that is preceded by another print call, presents this behavior.
And when the output is directed to the screen, we can see the report.
Could someone give me an idea of what is the problem?
Thanks,
Isis
SP - Brazil
The code used is below:
Set rpt = applic.OpenReport(App.Path & "SEFoto" + TipoRPT + ".rpt")
rpt.FormulaSyntax = crCrystalSyntaxFormula
rpt.FormulaFields.GetItemByName("Empresa").Text = "'" + Company + "'"
rpt.FormulaFields.GetItemByName("Idioma").Text = "'" + Idioma + "'"
rpt.FormulaFields.GetItemByName("Versao").Text = "'" + Versao + "'"
' ... Some lines to compose the selection formula
rpt.RecordSelectionFormula = Cond
' To evaluate the image length:
Arq = rsTMP3!FT_Arquivo
ImageScaling = FatorDeReducao(Arq, "F")
' To reduce the image length:
AchouOLE = False
For Each oSection In rpt.Sections
For Each oObject In oSection.ReportObjects
If oObject.Name = "PictureFoto" Then
Set oOleObject = oObject
AchouOLE = True
Exit For
End If
Next oObject
If AchouOLE Then Exit For
Next oSection
With oOleObject
.Suppress = True
.XScaling = ImageScaling ' 0.5 = 50%, 1 = 100%
.YScaling = ImageScaling
.Suppress = False
End With
Aguarde.Show 1
If DestinoRel = 9 Or DestinoRel = 1 Then ' Padrão ou impressora
rpt.PrintOut True ' <<<---- Here using true or false nothing happens
Else
PrintRPTtela rpt, "Fotos" ' <<<--- Here it works fine
End IfHi Isis,
Not sure if you have applied any service Packs to CR? If please do so and test again. Then you can upgrade to CR XI R2 for free, use your XI Keycode and download Service Pack 4 from this link:
https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe
You'll find the distribution files for your app also from that same download area.
If you don't want to upgrade to XI R2 then download all patches from XI and test again. This issues rings a bell that it may have been fixed.
Thank you
Don -
Production Order Print . table data in print output of order
Hi SAP Buddies
Can any one tell me what are the steps required for setting the SFC print output.
IMG setting for print output.. of SFC papers
Actually my main purpose is to get TABLE : MARD and Field LGPBE to printed on Goods Issue Slip.
Warm Regards
Brijesh Vermahi
IN iMG settings OPK8 you need to set the Script forms,program name, list contorls,and printer specifications. against the lists
to get your required data you need to edit the program assigend to the Goosde issue slip.
pl check
-ashok
Edited by: Ashok Keerthipati on Dec 24, 2008 10:00 AM -
Item text of PO print output is not generatiing but text is updated in PO
Hello ,
I am changing the PO through IDOC. When ever there is change in the quantity ,net price and delivery date the print out put is generated autoamtically and changes are appearing the print output.
when ever there is change in the item text of PO print output is not generatiing but item text is updated in the PO.
If i change manually print out is generating for item text also but through IDOC print output is not generated . please help to slove this isuue.
i am passing the value as :
idoc_data-segnam = 'E1BPMEPOTEXT'.
e1bpmepotext-po_item = Po line item number .
e1bpmepotext-text_id = txtid.
e1bpmepotext-text_form = textform.
e1bpmepotext-text_line = line item text .
idoc_data-sdata = e1bpmepotext.
APPEND idoc_data.
CLEAR idoc_data.
CLEAR e1bpmepotext.
please help me it is urgent
Thanks
VenkateshHi,
For triggering the output for changes you have to make some changes.
- Go to SM30
- Enter view name "<b>VV_T161M_EF</b>".
- Hit 'maintains' view.
- Now let's say your outpu type is 'NEU'. For this there will be one entry like this.
Operat. Ctyp. Name Short text Update
1 NEU Purchase order New
Now with this entry add one more entry like this.
Operat. Ctyp. Name Short text Update
2 NEU Purchase order Change X
You just need to enter Operat. = 2 and Ctyp = NEU. The 'name' and 'short text' will come automatically.
- Save your entry and create.
After doing this, your PO will trigger output on change.
Let me know if you have any other information.
Regards,
RS -
Color management settings for the best print output
Color Management while Printing has been one of the challenging areas which has been discussed a lot over user forums and has been a painful area in terms of clear understanding while taking print outputs.
Here is an easy-to-understand KB (Knowledge Base) article ‘Color management settings for the best print output’ to help you get the best from your printers using PSE and bridge that knowledge gap.
This article explains color management in Photoshop Elements, how to get better prints, and addresses some of the following issues like horizontal/vertical streaks in print output, too dark or too light print output, ICC profile problems and Color differences between prints from PSE and other applications.
Thanks,
GarryThanks Noel.
Yes have shared in PSE forum as well. But I usually drop such posts on PS General forum so community moderators as well as our power users who mostly use both PS or PSE or are aware about can communicate to their students, audiences etc.
The idea is to reach out the message to as many as folks via relevant forums. Most of my otehr posts have found mentioned only on PSE forum.
Thanks for the feedback Nice to hear such a great feedback within 5 mts of publishing
Regards,
Garry -
Email Sending of Purchase Order Created versus Print Output
Dear All,
I have been successful in sending the Purchase Order created as a PDF Attachment in email.
The problem i am facing is in the formatting of the attached output.
The attachment has different bold characters as compared to the print output of the PO , though both the outputs are using the same sapscript.
I am not able to find the reason for the difference.
Only because of this reason, my delivery is on hold.
Please guide me on how to find where the difference could be and how to rectify it.
Thanks & Regards,
BhavikaCould you tell us which fonts you tried?
What device type did you choose? (SPAD transaction, select your output device to determine the device type)
Could you upload TrueType fonts (one normal, one bold) with RSTXPDF2 program (do not tick "do not embed font in PDF" option so that the font is embedded in the PDF file)?
Did you make sure that your font is not converted to another one? (SE73, printer font, choose your device type, click conversion button, and check what is the converted font)
Maybe you are looking for
-
My ipod touch 4th Gen doesn't show me the music and videos
My ipod touch 4th Gen doesn't show me the music and videos I have, even though I can see it all in the I tunes and I can see that the ipod memory is full as it was... What to do??? Thx
-
Can this be done on a Mac yet? Or is it still a pc only option.. As i'd love to update my external pioneer drive firmware.. Come to think of it, i'd love to update the internal one too.. But Matshita never seem to update the firmware :o( Regards Chip
-
Like many I have collected physical DVD's over 20 years. I bought them, I own them. How or where can I store my collection of DVD's so that I can access them via AppleTV OR store them in/on some sort of electronic media/device. Some may have digit
-
Hi all, I have just downloaded PSE 10 trial version and find that most of my photos in my albums are marked as missing photos with the little yellow ? Could someone please tell me why this is so and how can I fix the problem. I can reconnect each
-
Hi, I'd like to execute my custom logic when a user clicks on a signature field. Currently I have tried preSign and mouseDown events. But after executing my script, the signing dialog pops up. Is there a way to make signing dialog don't appear?