Printer PIXMA MX890 stopped printing

All of a sudden my printer stopped printer and error message cassette and no paper when the cassette is clear and has paper.

Hello.
Please check the message on the LCD display to see what paper source is specified. It may be possible that the unit is attempting to feed from a different tray depending on what size and type of paper is selected.
If you continue to have difficulties, additional troubleshooting will have to be done to narrow down the cause of these issues. Please contact our support group using the link below for additional assistance.
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Pixma MG5420 stops printing midway through picture

Printing out a handful of 4"X6" borderless postcards. It will print several at a time, or maybe not even finish one, and just stop. No message on the display. The only thing I see in the console on the Mac is "Canon_MG5400_series: File "/Library/Caches/com.apple.ipp2ppd.Canon MG5400 series.icns" not available: No such file or directory", which I think is an ignorable error.
What causes a printer to just stop printing mid-page and think it's done? Ink levels look good, paper feed looks good...
Thanks!

Hi stubbleskark!
In order to provide you with the proper steps, please let everyone know what version OS (Mac OS 10.x, etc) you are running on your machine. That way, the community will be able to assist you with a workflow appropriate for your computer.
Thanks!

MY PRINTER WILL NOT STOP PRINTING

I have a brand new HP 309a wireless printer. I am using it with a USB PORT. I downloaded something from a PDF file and the printer will not stop printing. I rebooted the computer, I disconnected the printer for an hour and when I turned it on it resumed I hit the cancel button, the display reads "print cancelled" and then it reads "now printing." When I attempt to use the printer to print something else it reads "busy." HELP.
This question was solved.
View Solution.

Hi,
Disconnect the USB cable and follow the below steps to restart the spooler service.
Click Start (Windows logo) >> All Programs >> Accessories >>
Right click on Command Prompt and open it as Administrator ( choose run as administrator)
Enter the below command in black window and hit enter key..
net stop spooler
That will stop the spooler service.
Then enter the below command and hit enter key to start the spooler service
net start spooler
That will delete the current print comment and the things in print queue.
Press the widnows key and R key on the key board to open run window ( Click on Start >> Run).
In run window enter services.msc and click Ok.
That will open services window.
From there double click on the print spooler service.That will open a new window.
Click on Stop button to stop and then click on start button to restart the spooler service.
Make sure that startup type is : Automatic and Service status is : Started
Click on Apply and Ok to close the services window.
If the issue resolved,
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Saul
Tech Support Eng.
HP

1102W printer won't stop printing

My 1102w wireless printer works fine from the host PC (HP Pavillion) using Win Vista64.
I have an Acer notebook (Win7 Home Premuim with all updates) which has the latest HP software for the 1102w installed. When I select a text file to print from the notebook, it prints just fine but will not stop. For example, when
printing a one-page document the one page will continuously print until I shut down the printer
and cancel the print job. With the Print Status display shown, the document queued for printing will
never go away. It's as if the software is never recognizing the End of File character.
I did do a search on this forum for something similar to this problem but didn't see any posts that applied. Thanks
for any help.

Disable the "Enable bidirectional support" in the P1102w Properties > Ports.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

The printer does not stop printing

I have set up my printer (HP Color LaserJet CP1215) to my airport extreme; I have succeed to print to my printer. But the printer keep printing the same pages, and it prints continuously. Anybody know why this can be happened?

Hello hhartono. Welcome to the Apple Discussions!
I assume that you have this printer connected to the USB port on the AirPort Extreme Base Station (AEBS) ... correct? If so, does the AirPort Utility recognize it as the exact printer model?
Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link.
If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help:
o Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if the printer you are interested in is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

PIXMA MX922 stopped printing

Have been using it for a couple of weeks. Today printer is on, it is the default printer in Windows 7. Sent documents to print; they appear in the printing queue, then it gives "error printing" message. Went to Canon utility, sent test page, same result. No error codes showing in printer display. Printer status is "Ready" when I check it in Devices and Printer. Turned everything on and off, same results.
In summary, printer is connected, no error messages, but no print output.
Please help!
Solved!
Go to Solution.

Click Start
Type: 'Print Management'
In the left pane navigate to: Print Servers | PC Name (local) | Drivers
Delete the faulty print driver, or if you're not sure, delete all of the Print Drivers listed.
Restart and download another or updated driver for your printer from the Canon's web site.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 9, Lightroom 6

Printer won't stop printing.

Asked for six copies of a one page document and won't stop even after pressing cancel printing.
HP Officejet 6500
Windows 7
This question was solved.
View Solution.

Power off the pc and the printer, then load them both back up. This should hopefully clear it from memory if it is getting stuck somewhere.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

Hp photosmart 8250 printer won't stop printing

my photosmart printer, no matter how many copies I am trying to print, will print until the paper runs out. I have wasted so much paper, thinking it will print the picture I want to print and stop.

My Photosmart C309a does something similar but I am printing a multiple page pdf. I've gone to so many forums and tried so many different work arounds, all to no avail. I am convinced the HP software is junk.
Temporary fixes I have tried are:
go to c\windows\system32\spool\printers and delete whatever files are in there. Next, go to Admin tools>services>print spooler and click on properties tab. Set it to automatic. Remote Procedure Call (RPC) also needs to be runnung. Just look a little further down on the services list and you'll see it. Set for automatic also. Then uninstall and reinstall your print software.
I have found that the printer behaves normally for a while, but then it forgets to talk nice to Windows and starts messing up again. Hopefully this helps. Good luck.

HP 1102W Wireless printer won't stop printing

When I send a print job to the 1102W wireless printer requesting one copy, it prints continuous copies until the printer runs out of paper. Help! I'm running out of paper and toner...
Happens from both my computers: one using Windows XP and the other using Windows 7.
Thanks.
This question was solved.
View Solution.

This can often occur depending on how the network installation was done. Usually, there shouldn't be any issues if you utilized the Smart Install or ran the network install from the CD. Can run into problems with a Standard TCP/IP port configuration if the driver was added another way.
Give the following a try. Basically disable the "bidirectional support" setting in the driver. Here is a link to a doc:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02205132&tmp_track_link=ot_faqs/top_issues/en_u...
Though I work for HP, My posts express MY opinion, and not those of HP.

Brand new printer from HP stopped printing black...

...and I trashed my last 3 year old printer because I couldn't get it to print black!!!
are there any class action lawyers out there ready to sue these guys?
just look on-line at the number of people having this problem!
it's a defective product- that used to be a great product- but no longer works and HP knows about the problem but continues to sell a defective product
it is no doubt a software glitch related to their constant attempts to lock us into their products but I'm out- no more HPs
my office converted to a networked xerox system because of this exact problem and I am getting a different brand for home use
what a shame- it used to be a great company

Hi, which printer model do you have?
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

HP Laserjet 400 M401n won't stop printing when more than 1 copy is specified

I use this HP Laserjet printer on a network. It's brand new. I print from both Macbook Pro and / or Mac Pro running OS 10.9.5. Downloaded and installed latest HP printer driver.
Problem: I can print 1 page just fine. But when I specify more than that, the printer will not stop printing copies for the number I specified. I have to press the cancel button to stop it. I have tried resetting the printer. No luck.

I don't use spell catcher.
I found a workaround posted elsewhere in the Apple discussion forum. When going through the printing dialog boxes, select Preview and print whatever number of pages I need from that window. It works fine so I'll use that method until a future Mac OS X update fixes the problem.
The security update for OS X on 3-1-06 didn't fix the problem even after I repaired permissions.
Thanks for responding.

I have a HP Officejet Pro 8500A that stopped printing from my HP Pavilion notebook.

I have a HP officejet pro 8500a printer that has stopped printing. It will not print anything off of my HP pavilion notebook and I just found out that it will not copy anything either. Does anyone know what the problem may be?

HI @anewleaf , and welcome to the HP Forums!
I see you're running into copy and print issues. I'd love to help!
I have a few questions before we get the ball rolling:
Are you using Windows or Macintosh?
If you are using Windows, is it a 32-bit or a 64-bit system?
Do you recieve any errors?
Is the printer not printing any pages, or printing blank pages?
I'm including documents that will help you find the system info:
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

I have the canon MX880 series. Why do it stop printing when not in use for about 30 days?

Hello,
As stated in the subject line, my printer seems to stop printing after sitting for a few weeks. I don't know how I end up getting it to print again, I just keep trying different things and with luck some how it starts to print again, SOMETIMES. However, today I did not get it to print at all. It will not work with WIFI or the USB cord. I have had this printer for about a year and have had this problem every since.
Any help would be greatly appreciated.
Regards
lmd

Hi Tangable34 and Abigail111,
Since each network setup is personal and unique, I recommend contacting us for more catered support. To save a bit of time, be sure to print out a LAN details page and have the information available for your support agent. To print this page, follow these step:
Press the Setup button.
Select Device settings, then press the OK button.
Select LAN settings, then press the OK button.
Select Confirm LAN settings, then press the OK button.
Select Print LAN details, then press the OK button to confirm the selection.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Airprint won't stop printing

Everytime I print from one of my IOS devices, my printer will not stop printing the iDevice continues to send the job to the printer. I have to turn the device off in order for the printer to stop printing.
Any thoughts?
iPhone 4S, IOS 6.0.1
iPhone 5, IOS 6.0.2
iPad 2, IOS 6.0.1
HP Laserjet Pro M1217nfw MFP, firmware 20120901

Hi jbrophy11 and all,
Seems the latest FW update does not support iOS devices with iOS 10.6. This is a problem that should be fixed in the next firmware update.
There are currently 3 workarounds that you may try:
1. Manually cancel the print job on the “Print Center” of your iPhone/iPad
     a. Double –click the Home button to display recently used apps
     b. Swipe left or right to find “Print Center”
     c. Tap “Printer Center” and click “Cancel Printing”
2. Power cycle the Laserjet
3. Downgrade firmware to the version of 20120206 from Mac OS
     a. Download the FW 20120206 from HP.com under LJ M1217nfw support page
     b. Run the FW Utility with a USB cable connecting to LJ M1217nfw
     The previous version FW (20120206) only refer to Mac users and it can be downloaded from HP.com: HP LaserJet Firmware Update
You may check from time to time if a newer version than 20120901 gets released and update your device with the new Firmware version.
Best regards,
Mandy

I have a hp7250 all in one printer and it just stopped printing hp printer says radio not working

i have a hp 7250 all in one printer it just stopped printing my compute says its offline but when i go to pinter and try set up it says cannoct connect then review says raido not working

If that reset did not resolve the issue, and the printout indicates that the wireless radio is not working then there are a few options that we can go through.
First, make sure that through the Setup Menu that the wireless has been enabled and turned on. If these options are not available, you may have to try a differnet reset that I will PM to you.
Also, if the wireless radio is not functional then you might consider connecting the printer directly to the router using an Ethernet cord and reinstalling the printer on your computer using that method of communication.
Let me know! Happy holiday!

Printer PIXMA MX890 stopped printing

Similar Messages

Maybe you are looking for