Printer prints when it feels like it

I have a Photosmart C7280 all in one which I bought maybe close to two years ago.
Running XP on a two PC home network through a Linksys cable/dsl router.
For the most part, happy with it.
Problem is, when I click the print button I can never be sure if my document will print or not - and it usually doesn't at critical times.
Have reinstalled software and looked for updated drivers (which there are none).  What now?
Thanks.

When the printer does not print are there any error messages on either the printer or the PC?  What is the status in the spooler?  Can you access the printer's built-in web server?
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging 
Message Edited by Bob_Headrick on 05-16-2009 10:18 PM
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • E7 deleting all my emails when it feels like it he...

    Hi everyone, im not a techie chap so any easy to understand help would be grateful.
    Last 5 weeks or so since the last update my E7 emails have been deleting themselves when they feel like it but only on my pop3 mail??? My live mail has been fine. 
    I have deleted both mail accounts and re set them not accepting the terms page. Also tried a reset on the phone but nothing is helping. Any ideas please.
    Or Santa will be delivering a I phone......nnnnnnnnooooooooooooooooooooooooooo
    Solved!
    Go to Solution.

    Do you currently download your pop3 from another program like outlook maybe. It just has to do with the settings of the program. If the progam is not configured to leave mail on the server then after downloading, the messages will be gone. When you then synchronise with your e7 there are no messaages so all are removed from the phone. I had the same prob. The setting has to be configured from your mail client or service provider. Live mail is left on the server until you delete it. Try deleting a recent message online in you live mail account then sync with your handset. That message should also be gone from the hanset after the sync.

  • Back to my mac a joke! works"when it feels like it"

    Read all the Back to my mac and how easy it is to set up and use. to that I say &&&&%^%%%$%$
    It only works when you have the laptop and the G5 right next to each other. Which is od no use!
    See other details for my set up. It does NOT share at all and the apple supt and store didn't have a clue! I able to print just fine anywhere in the house or even outside from my network and others people networks,
    I have the 2Wire with the wireless enable and disabled it doesn't work either way. The only reason I got the airport and assoc card was to be able to use back to my mac when I am only thr road.
    ANYONE ELSE ABLE TO GET IT O WORK.
    That problem one two is about networking with a windows computer that my brother has doesnt' work either!

    Here's the G5 networking forum.
    Try a new post there.
    DALE

  • Pdf's Open When They Feel Like It

    I'm working with a website (someone else created) that has a
    page that opens pdf's from a link into a blank window (target). The
    links always work in Netscape and Firefox, but only sometimes with
    ie. For example, it always works from the free X-Drive server
    account I have. It also works from my work computer in a couple of
    places on the hard drive, but not from my desktop. It doesn't work
    at ALL on my home computer.
    I know the easiest solution is to say not to use ie or to
    change security settings, etc., but this site will be burnt to CD
    and distributed to non-technical people and will be autorun. So, it
    has to be configured in a way to work from the beginning. So far,
    ANY external media I put it on - flash drive/CD/virtual drives it
    won't work on.
    The links are document relative (i.e.
    ../pdffolder/example.pdf) but when I rollover the links, the
    browser pane display (sorry, not sure what it's called) says
    "file:///C:/pdffolder/example.pdf. So, it looks like somehow it's
    rewriting the code to be absolute? There are pretty complex style
    sheets used in this site, but I haven't found anything that looks
    like it refers to how the links "work."
    I have no idea what's going on. I've been working on this for
    about 15 hours now (during work days) and canNOT figure it out.
    There seems to be no pattern.
    Does anyone have ANY idea what's going on?
    Thank you!

    > The links are document relative
    are you positive they are all document relative?
    do a sitewide search for
    and
    any turn up?
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Incredible 2 powers down and then powers back up when it feels like it

    Moved for greater exposure

    pltrupe wrote:
    I just bought this phone and am having this problem. When I go to do software update, there are no updates. Any other suggestions for fixing this?
    pltrupe,
    Sorry you are having trouble with updating your phone's software!  I would be happy to assist you!
    I would first like to know the software version that is currently installed on your Incredible 2?  I'm including a link below with instructions and screen shots of how to check the software version:
    View Software Version - HTC Droid Incredible 2 ADR6350
    Please let me know what you find.

  • Screen saver can't be disabled; starts when it feels like it

    I have a weird problem with my screen saver. I had to shut down my Mac mini (G4, 1.42GHz) manually via the power button a few days ago, and ever since then, the system refuses to obey the "Start screen saver:" time delay preference in System Preferences. I'd always had it set to "Never", but now it always starts after the standard time interval. I've since discovered that even if I set it to 3 minutes, it still waits a half hour or so to start (I'm assuming it's the default delay).
    I've checked for corrupt preferences in my home and main Library directories files using plutil, but they're all good; I booted with the restore disc to repair any startup disk HDD errors in Disk Utility (there were some errors, in what files and of what vintage I know not, but I was able to fully repair the disk and now no problems are reported); I've even trashed and re-set my screen saver .plist file (~/Library/Preferences/ByHost/com.apple.screensaver.SOMEHASH.plist) a few times. From the looks of things, the Screen Saver preferences pane is recording the correct idle time and screen saver in the .plist file, it's just not honoring the idle time. It does, however, allow me to change the screen saver itself. I don't have any screen savers installed that didn't come with the system -- I've been alternating between the iTunes and RSS ones since I can't choose 'None'.
    Any ideas on how to fix this? I can't emphasize enough how much I hate screen savers (no offense to the programmers, they're just not my thing!). It's especially frustrating that I have to leave the computer sit for a half hour just to test any possible solution...

    So after some time it stopped doing it. Then it started again. I still don't know what the issue is, but I do know what causes it.
    When I plug in an external monitor to the DVI port, the sreensaver disregards any mouse movements on the the extended display, and goes into screensaver mode. If I disconnect the monitor the computer continues to act as it does when the monitor is plugged in. What I've done to remedy this is use the laptop in clamshell mode, disable the screensaver, then disconnect the monitor.
    This seems to remedy the problem. Hope this helps anybody else with similar issues.
    PS External is Samsung 930b 19" (for what its worth)
    Thanks for your help.

  • HT1296 I get duplicate photos on my iPad.  How do I stop this happening or delete the additional copy I don't want?  It doesn't happen with all photos.  Just when it feels like it

    In some folders I get duplicates (or even multiple) copies of the same photograph.  How do I stop this happening or when it does how do I delete the extra copies I don't want.  Plus from time to time the photos in one folder will appear in another?  Do they do this when I'm asleep?  Help please

    It was gift back in September. You can follow the instructions in the link below to remove them:
    Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases - Apple Support

  • Track ball has decide to stop working or only when it feels like it

    hi please help
    the track ball on my 9300 has stopped working i have taken battery out and rebooted but still no good any ideas please x
    Solved!
    Go to Solution.

    Hello !
    Your problem seems to be more like a Hardware problem rather then a software problem.
    So would request to visit your neares Authorised BlackBerry Service Centre, for handling of the issue.
    Hope this resolves your Problem!
    If your problem has been resolved then would request you to Click on "Like" and accept as solution so that other Advisors doesnt invest there time on this Message anymore.
    Thanks.

  • 'Numbers' Crashes when it feels like.

    I've been using Numbers '08 for sum time now to keep records for my business. These past two weeks the spreadsheets crash with no warning. I cannot even QUIT the program and have to FORCE QUIT. IF I reopen numbers there is nothing. I know the program is running because the mouse let's me read whatever is hovering over the program but again there is no spreadsheet showing. I have to shut-down and restart in order to open Numbers. I now have to SAVE every time I enter data because I do not know when it will crash again. I do not or have not noticed this problem with other applications. I installed Leopard three weeks ago and never had this problem with Numbers until Leopard was installed. Also, I re-installed 'iWorks' but that did not help with crashes. Anyone have any suggestions as to WHY or HOW to fix this problem? Thanks

    Hello
    Welcome to the club.
    Often asked question.
    Always the same response.
    a - repair permissions with Disk Utilities
    b - trash the preferences file:
    <boot volume>:Users:< your account >:Library:Preferences:com.apple.iWork.Numbers.plist
    Yvan KOENIG (from FRANCE samedi 19 janvier 2008 11:38:2)

  • HT201412 i have a iphone 3gs when you plug it in, for  hours still bshows charging, even over night! Red like its dead! when it feels likie it the apple stays on screen, and ytou van hear it evry 10 or 15 minutes acting like it just was plugged in! then i

    I have a Iphone 3gs you plug it in, it charges for hours,and still Seems TO BE DEAD! WHEN IT COMES ON APPLE stays on screen, i hold both buttons it wants to RESET THEN, It searches, and searches! Then computer says get in touch with Apple. I have another one wont turn on, actually 2 that wont turn on!  so now I have 3 iphone 3gs that dont work!  Im bummed!
    Chas Schoals
    (517)819-8059

    Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
    If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode.

  • Have an iphone 3gs on 5.01 unlocked, was working perfect untill yesterday it started pl;aying up only makes calls when it feels like it and when i get a call out or in i can hear thm but they cant hear me, the mic is working cause i can make a voice note,

    need help

    Have you restored as a new device and tried your phone before you add any apps back?  If you do this and you're still having problems, then you are having a hardware malfunction and will need to bring your phone into Apple for evaluation and possible replacement.

  • On Demand? More like "when it feels like it"

    Is anybody else having to continually reset their BT vision box and home hub to watch anything on demand. Normally the programme starts then starts to freeze. Finally error message V05 appears and the only solution is to reseboth vision box and home hub. Every now and again is understandable but not everyday.  The Internet help for V05 is pretty much useless
    My contract with BT is up in a few months. I'm afraid Sky is calling

    Crustychris33 wrote:
    Thanks for answers and tips.
    My BT vision setup was an absolute nightmate, to the point I emailed Ian Livingston ( BT chairman) direct.  He did respond and within a few days everything was up and running fine.  Ive been with BT vision for about 18 months now and The problem has happened before but only intermittently.  Now I need to reset my box pretty much every tin time I want to use on demand.  Normally I turn the box and home hub off for a couple of mins max.  I always let the home hub get 3 blues before powering up the BT vision box.  The BT Vision box and Home hub are about 10 feet from each other conducted with the LAN cable supplied. The home hub is plugged into the BT master socket.  This pretty much counts out any forms of interference from phone extensions etc. last time I tested my broadband speed it was 13mb. I have to admit I haven't phoned the help desk yet but will have too if it carries on.
    Ouch. You have had problems. Your setup sounds about as good as it can get. Perhaps your broadband has an intermittent fault which could cause the V05? You could post your detailed ADSL stats from your hub and someone might be able to spot if something looks amiss there.
    Otherwise, surely the fault must lie with your Vison+ box. Do you have a silver or a black BT Vision box? If silver then it would certainly be worth phoning them up and convincing them that your box is faulty.

  • Preview will not print 8.5" x 14", only when the computer feels like it

    This problem has gone on for too long and I don't know what else to do. I have flyers that I cannot print because preview refuses to recognize the document size correctly and consistantly, and I have no other program that can print to our copier.
    This happens with any PDF that is not 8.5" x 11". Both 8.5" x 14" and 11" x 17" exhibit the same problem. First I open a PDF in Preview, then I change the document size in Page Setup to "US Legal" and scale of 100% (the scale is always wrong because it is automatically resizing the document to fit on 8.5" x 11"). Then I go to print, check under Paper Handling and under Destination Paper Size is says "Use documents paper size: US Letter". This does not change no matter how many times I visit Page Setup and no matter how many times I save and re-save the file.
    At random it will recognize the document size as "US Legal", but this happens only when the computer feels like it, at least that's what it seems like because there are no other settings that are different between one file and another that would cause it to print one as Letter and the next one as Legal.
    Some PDFs are created in Photoshop, while other are created in Acrobat. I cannot print directly from Acrobat because of some weird problem with our copier; I cannot print from any Adobe CS3 software.
    I don't know what to do. Any help is greatly appreciated.

    com.apple.print.custompapers.plist didn't exist on my machine, but com.apple.Preview.plist did. I moved it to the desktop as you suggested, opened the files in Preview and this time it worked. Thanks so much!
    I tried looking at the file, but it didn't make any sense to me. Must have been something in there that caused the problem, though.

  • I don't feel like buying any more printers. I told my daughter to attach the document she wanted to print to an email to me and I would see if I could print it. No problem. Will this always be true?

    Sorry. That should have been a heading and not the whole question. I am trying to figure out the question of iPad printing. If there was such a thing as a great little portable iPad printer maybe I would give my daughter one some day. But the printer I am using is working for me because I installed it as a network printer on my  wired network. It does have WiFi capabilities but it does not have the 'Air' thing.  It's an HP Officejet 4500 etc etc...My question is: will printing anything from her iPad always be as easy as she attaching a document to an email and mailing to herself on Yahoo which she can retrieve on any of 3 PCs in this house? I hope so - my computer budget is blown...

    iOS AirPrint Printers  http://support.apple.com/kb/HT4356http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-optionshttp://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    How to Print from Your iPad
    http://www.dummies.com/how-to/content/how-to-print-from-your-ipad.htmlhttp://www.dummies.com/how-to/content/how-to-print-from-your-ipad.html
    How do you print directly from the iPad
    http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-print-documents-direc tly-from-ipad.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-print-documents-direc tly-from-ipad.html
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
    iPad Power: How to Print
    http://www.macworld.com/article/1160312/ipad_printing.htmlhttp://www.macworld.com/article/1160312/ipad_printing.html
    Check out these print apps for the iPad.
    Print Utility for iPad  ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
    Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8   Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
    FingerPrint turns any printer into an AirPrint printer
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
    Print (Print to ALL Printers) ($1.99)
    https://itunes.apple.com/us/app/print-print-to-all-printers/id299423224?mt=8https://itunes.apple.com/us/app/print-print-to-all-printers/id299423224?mt=8
     Cheers, Tom

  • I have a photosmart plus b210 e print and when I print with a black back ground I get lines

    I have a photosmart plus b210 e print and when I print  with a black back ground I get lines.  What can I do to eliminate the
    lines in the photo
    Thank You

    Hey appollus,
    Do you get these lines only when printing with ePrint? If not, it sounds like a printhead issue. Here are the steps to fix the issue.
    1. Go to the setup menu on the printers front screen.
    2. Go to tools.
    3. Go to clean printhead
    You may need to do this a few times to completely remove the lines in the print.
    Although I am an HP employee, I am speaking for myself and not for HP.
    If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

Maybe you are looking for