Printer Pro 10 disc printing misalignment

I am trying to print onto printable CD's for the first time using the Pro 10. Unfortunately the manual doesn't clearly explain how to do this.  and the disc tray, the print is not aligning over the disc. The tray with the disc is aligned properly with the arrows.The print quality is good but not covering the disc. 
Canon suppport got me to download Easy Print software which has templates that are predesigned but I can't get a clear or blank template to use.  
And currently Canon support are unable to help.They failed to understand I have the program and it should work and that the  problem is me with probably something in the settings not quite right. They are going to get back to me with my request for someone to step me through it. I have had 4 lengthy phonecalls already.
If anyone is printing onto CD's using the Pro 10 and knows the process can they help out?
I am using a Mac with Photoshop, and Studio Pro.
Do they use a template in the printing process? I am using a square image in Photoshop?
Thanks

It seems to me that Canon tries to make it's software fool proof.  But it seems in their efforts they make it so only a fool can use it.  I think you just need to play around with Easy Photo Print EX and you will eventually understand their thought process.
If you use PS, that I am sure you can master EPP EX.
A few tips, you must select your imagaes first.  They show up in the space below the project.  When you click on the image there will be the little adjustment squares.  Just click and move them where you want the picture and what size you want it.  Just like Free Transform in PS.
Also, hover over the little Edit tabs and a pop-up will tell you what it does.
It is pretty "easy" when you get on to it.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 9, Lightroom 6

Similar Messages

  • Canon Pro-100 13x19" Prints - Images suddently printing misaligned/slanted - Please help!

    Hi, I purchased a Canon Pro-100 printer about two weeks ago and I have been printing lots of 13x19 prints on Canon brand semi-gloss paper. I have successfully printed about 60 prints, but suddenly I have an issue. The images are printing misaligned/slanted on the paper, so that there is a sliver of blank paper on the bottom right and bottom left. Here is a picture of what is happening to the prints:
    http://i923.photobucket.com/albums/ad79/milligangames/101_22941_zpsf995dcd2.jpg
    I have tried cleaning the bottom plate, cleaning the roller, aligning the print head both manually and automatically, but nothing is helping. When I print on 8.5x11 or 4x6 paper I do not seem to encounter this issue. Does this mean the paper is feeding unevenly for some reason? Please help!

    Hi pmilligan,
    It is recommended that you contact live technical support . There is NO charge for this call. Real time feedback of a live technical support call would be very beneficial in this case.
    Please dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays). A Canon technical support representative will be able to resolve this issue faster.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I bought the Adobe Acrobat Pro on Disc, then realized my new laptop doesn't have a CD drive. Can I just download it with my serial number or do I have to send it back?

    I bought a new laptop after mine was stolen. I also purchased Adobe Acrobat Pro on Disc. I then realized my new steady state laptop doesn't have a CD drive... Can I download the software with my serial number or do I have to send it back and purchase the downloadable version?

    I also purchased Adobe Acrobat Pro
    Which version?
    You can simply download the installer from Adobe, install then enter your serial number when prompted.
    Download and Installation Help

  • Can I use WinXP Home serial number using WinXP Pro install disc

    Hello everyone,
    I am going to downgrade from Vista to XP (my DELL machine was originally XP Home) but I don't have my old XP install files anymore.  I did do have a Windows XP Professional SP3 install disc.  My question is:  Would I be able to use my serial number using the WinXP Pro install disc for a clean install?  (I am going to format my C drive.)
    Thanks!

    Hey there! You would not be able to use the Home Key with a Professional disc.
    Adam
    Best Buy Community - Retail, Americas
    Forum Guidelines | Terms & Conditions | Community Guidelines | Blogging Guidelines
    *Remember to mark your questions solved and click the star under the user's name to show your thanks!

  • Just got a macbook pro, no disc drive. how do I install disc-based software? Do I have to buy an external drive? ARgh.

    Just got a macbook pro, no disc drive. how do I install disc-based software? Do I have to buy an external drive? ARgh.

    Yes, an external drive will be necessary.  You may purchase the Mac superdrive from the online store or one from another manufacturer.  All will work.
    http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive
    Ciao.

  • Macbook Pro Install Disc

    Hello i was wondering if the Macbook Pro Install disc Version 3A136 - 10.5.2 2008 would work on a 17" macbook pro.
    Even though it doesn't actually say on the original disk that it is for a 15" MAcbook Pro.
    Cheers
    Adam

    No, you need the grey disks that came with the 17" or a later sold copy of the Snow Leopard restail disks that have your hardware drivers on it.
    Call Apple with your serial number for the grey disks, the white Snow you can stil buy online in places.
    If your new 2011 machine came factory installed with Lion you can't go back to Snow unless you follow "the procedure" here and the risk is all yours.
    https://discussions.apple.com/thread/3264421?start=0&tstart=0
    I advise reading this too
    https://discussions.apple.com/message/16276201#16276201

  • Color LaserJet CP1515n colour print misalignment between CMYK

    The registration of the 4 colors has significantly gone out of alignment by up to 2 mm both horizontally and vertically. I have tried all the HP documentation through to section 11, but no amount of calibration or changing supplies will put the colors back in alignment. I had hoped that there would be a registration tool for the laser printer but I cannot find one despite extensive searching of both HP and rest of web. I recon HP actually register the cartridges by physical alignment, but it is not obvious to me in what way the drive chain may have altered to cause this effect. Clearly a small insert can move the cartridge side to side, but for vertical adjustment there seems to be little or no play in how the toner cartridge fits into the machine. Clearly the printer was ok recently and nobody had complained, and as it has not been moved or supplies replaced (other than paper), it is probably a physical problem, but what? I don't think it is a software issue, unless there has been an upgrade to the printer driver. I can't think that the firmware would have changed either. The printer is a current model (June 2012), just out of guarantee!. Does anybody know how to fix this (real solutions only please), or maybe a HP employee will actually know a proper way to do this?

    OMG I think I have cracked it.So I bought a CP1515n for £10 sold as spares or repair.  Worth a punt.  No toners though but for less than £7 each on ebay I was ready to go. the cyan is misaligned, the yellow ‘ain’t printing.  Perhaps the crack at the of the printer indicating it was dropped was the reason.So I searched the web and came across this useful site.  Did all the tricks but was curious about the dust one.  Mmmmm.True, fine dust on the thingy may mean a slight lag for the first colour but picking up for the rest.So I stripped of the sides, top, front and back - basically anything that had an easy access screw and was clipped on.  Gave every nook and cranny a good vacuum with the crevice extension.  Also gave the wide rubber belt a really good clean with micro fibre cloth.  There was plenty of fine dust and toner in really thin layers.  Easy to roll it around with your hand.Put it back together and printed a test page.:/  The yellow has suddenly started working but the cyan was still out of alignment. And now for the solution. On a whim, I scrolled through the paper Def. paper type list. It was set to plain.  Urrmmm, see what happens if I set it to rough.   I DID IT, I AM A GENIUS.   IT WORKED Try setting the paper to rough and see if that fixes it. So I have a colour laser printer for 10 quid and three new colour tonners for less than 20 quid. RESULT. I thank you.....(bows, bows again, and again to applause ringing in his ears). If you are careful you can just remove the tonner tray to get access to the rubber band that drags the paper through for a clean. There is a plastic widget on the left hand side to watch out for, it clips in horizontally. I found it because it dropped out, luckily I found where it came from.

  • Colorlaserjet 1518ni printing misalignment on right side of page

    Cyan printing is skewed on right side of page

    Hi Mmmmmmk, 
    Calibrate the printer
    Follow these steps to calibrate the product.
    Open ToolboxFX .
    Windows XP: Click Start, click All Programs , click HP , click your product, and then click HP Color LaserJet CP1510 Series ToolboxFX .
    Windows Vista: Click the Windows icon, click All Programs , click HP , click your product, and then click HP Color LaserJet CP1510 Series ToolboxFX .
    Click the Device Settings folder, and then click the Print Quality page.
    In the Color Calibration area, select the Calibrate Now check box.
    Click Apply to calibrate the product.
    NOTE:Calibration might take two to three minutes. Do not turn the product off during calibration.
    When calibration ends, try printing again.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Can you get windows on a macbook pro without discs?

    hi ive recently bought a MacBook Pro which i am very pleased with however i play a few games on my old pc and i hear i will need to install windows onto my mac using a disc (which i am willing to purchase) HOWEVER i have looked on You tube a few times to watch how to do it and they all use THE ORIGINAL discs which came with their laptop however mine didnt come with any discs is there a way around it if so can someone please tell me step by step as to how to do it?
    Many thanks

    Usually the OEM version of Windows that came with your machine is licensed to that machine only so there isn't a way to legally use that copy of Windows.  Many people think that's unfair but fair and legal aren't always the same thing.
    Sorry

  • Mac book pro hard disc replacement and back up from time machine

    Recently i replaced my  mac book pro's hard disc and now i am facing various problems such as:
    Itunes  does not recognize any of my devices (iphone  & ipad) and iphoto can not import my photos.
    Before replacement i had made back up with time machine. Can You please tell me how i will brink my laptop
    Into initial condition through time machine and all to be again as it used to be before disc's  replacement
    Thanks in advance
    Stavros

    Hi bodegakc,
    If you have the serial number then please use the below mentioned link to download the product you are looking for .
    CS5.5
    Also before installing Please go to Applications-->Utilities--> Adobe installers and if there is any uninstaller for CS5.5 , you can remove it and do a fresh install.
    You can also use creative cloud cleaner tool before installing.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Thanks
    Nikhil Gupta

  • Can I install Tiger on a G4 using Mac Pro or MacBook Pro install discs?

    I gave my old G4 dual500MHz processor running system 9.2.2 to my brother some time ago and he really wants to upgrade to tiger. I bought a copy of Tiger when it first came out but I have lost the disc. I currently have 3 macs and they're all intel machines so I don't have install discs on hand that are pre-intel. I would like to do a complete overhaul of the G4 but I am worried that the install discs I currently have might not work on it. I also have Disk Warrior and Drive Genius and plan to run them extensively on that machine as well. If not, can I start the G4 up as a target disc and do the install from my mac pro? Or is there a way to download a disc image of the older system and install it that way?

    If you bought a retail copy of Tiger & are not using it for another Mac, you do hold a Tiger OS license you could transfer to your brother legally. However, your brother still will need disks that install the PPC version of the OS for it to be installed on the G4, & for troubleshooting or some maintenance tasks. Intel-specific installer disks do not meet this requirement.
    If you can document your purchase (like if you have a receipt for it from an authorized Apple dealer or the proof-of-purchase certificates) you may be able to purchase a replacement disk through Applecare.

  • Where can I purchase a Windows 7 Pro or Windows 8 Pro recovery discs?

    Guys,
    I have a Thinkpad T500 which I installed an Oracle Linux OS. Now I want to restore my gear to a Windows 7 or Windows 8 pro.
    My question is where can I buy from Lenovo the said recovery discs?
    P.S. I lost my recovery discs and I need one to recover my system to factory setting.
    Thanks. (",)
    Lenovo Ideapad Laptops: G460 Lenovo Thinkpad Laptops: T500
    USED To own: IBM T42 and IBM R50e. Very tough laptops that last.
    Solved!
    Go to Solution.

    You might wish to try calling Lenovo Service to see if they can provide/sell you a WinVista set.
    Country or Region
    Product
    Language
    Telephone number
    Hours of operation
    Philippines
    THINK-branded products
    Tagalog, English
    1-800-8908-6454 (GLOBE subscribers)
    1-800-1441-0719 (PLDT subscribers)
    8:30 AM - 5 PM
    If they can, you could install it and then use an upgrade disk to get to Win7 or 8 Pro and be within license compliance.
    Regards.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Can I use my Macbook Pro OS discs to upgrade my desktop?

    Hello list
    I am wondering whether I can use the software install discs that came with my MacBook Pro to upgrade the OS on my desktop. I have a G4 quicksilver running OS 10.3.9, and the disks that came with my laptop are OS 10.4.6. Can I safely use them to upgrade my OS?
    f

    No. The install discs that came with your MBP are for intel machines only. It will not work.

  • Exchange Final Cut Pro 5 discs for upgrade to Intel

    I have Final Cut Pro 5 install discs and recently upgraded to iMac with Intel processor.  Is there a way to exchange the discs to Intel version?

    This is FCP X forum. Ask in  FCP Studio forum. Apple does not provide FCP Studio anymore

  • Lost Final Cut Pro Installation Disc

    Is there a way to get a replacement disc for Final Cut Pro 5 Academic. I lost mine and have looked hard and can't find it. OR Is there an e-mail for a support team person to Final Cut Pro so I can contact them? Please either answer one/both of the questions.
      Mac OS X (10.4.8)  

    I beleive the answer is No to both.
    It's kind of like losing your car ... you may still have the keys but that won't get you far, and the manufacturer is unlikely to send you a replacement.
    ... ok, its not really like that at all but I think you catch my drift

Maybe you are looking for

  • Need help with retrieving data in vector using for-loop

    ok for my code, i type in String name, password, phone number and int currentsalary and desiredsalary into the textfields and click Add, and it goes into the vector and name appears on the JList ApplicantList. what do i add to my listselectionlistene

  • Web Service issue in eclipse IDE

    Hi, I am trying to execute a code for web service related in eclipse IDE (Plug in environment). when i am trying to debug, It throws class not found exception in plugin environment and its not creating instance for Wsdlparser1. but it is executing fi

  • Running MDME on XP

    Hello all, I know it's not supported but I'm trying to run MDME server on XP. I know it's technically possible, but I'm struggling with the sql server setup. I'm attempting to use MS SQL Server Desktop Engine as the SQL Server. This is running fine a

  • How can I reset the open firmware password?

    I wanted to installed Mac OS X Lion from scratch on my newly purchased MBP 15,4" I put the installESD.dmg on a USB pendrive, then I boot on it. I used Disk utility to erase en encrypte my drive, and at the same time I set the Open firmware password.

  • My iphone 4 has been frozen for about thirty minutes but i do not want to restore it.. what can i do?

    I have tried to turn it off and lock it but the screen will not change. I have even tried to call it from my house phone, but it will not make any noise; even though the ringer is on.