Printer Problem with HP Office jet 6600

I have the following message displayed on the printer.
There is a problem with your printer or ink system. Turn the printer off then back on if the problem persist contact HP.
I have searched through the HP suggestion for repaid but find no match.
I did change my cartriges for the first time. The magenta supply showes low even though its a new cartrige all the other show full,
I'm under waranty but have no idea how to move forward
Any help would be greatly appreciated

Hi @FrankieP,
Welcome to the HP Forums!
I understand that you are getting the error message, "There is a problem with your printer or ink system. Turn the printer off then back on if the problem persist contact HP". With you HP Officejet 6600. I am happy to help with this error!
I would recommend to look through this guide, 'Problem with Ink System' Error Message Displays on the Computer During Setup.
If that guide does not resolve your issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

  • Recurring Printing Problem with HP Office Jet Pro L7590 w/Windows XP operating system

    This printer is a real workhorse but frequently, when printing large documents from the internet, the type changes from regular print to total giberish -something similar to a Russian Script. It does this midsteam into the document and there is no error message or any indicatin that something is wrong. It is also hit or miss-sometime I get the entire document in English and sometimes I don't. Unfortunately, I'm wasting a ton of paper and time to redo everything when it occurs.
    Other than the above, it works fine. Any suggestions on how to correct?

    So the printer will begin to print garbled text in the middle of large document print jobs, from time to time?  Is this correct?
    How is the L7590 connected to the WinXP PC? (USB, ethernet, wireless)
    How long is the USB cable if connected this way?
    How far away from the router is the printer if connected wirelessly?
    If usb connected, how old is the USB cable?
    It is possible that this problem is coming from a connection problem.  If a minor connection issue exists, then it can leave portions of the print language being sent as commands to the printer out.  This can change the printer's interpretation of the printer command language.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Simply Print Anything document with my Office Jet 6600

    Why can't I print with my Office jet 6600??
    Everything is connected but it is supposed to be Wireless??
    Please HELP I have been fighting this since I bought this printer!!
    Rene

    Hello rcblv. In order to assist you, I need to determine if the issue is hardware or software related. I want you to make a photocopy and perform a printer status report. I've included a link to the manual of this printer in case you need it. Let me know as soon as possible what the results are. I'm only here to help!
    http://h10032.www1.hp.com/ctg/Manual/c03226612.pdf
    Mario
    I worked on behalf of HP.

  • Solution Center problem with HP Office Jet J4550 and windows 7 (64bit)

    Hello All,
    I have a problem. I have the Solution Center and a HP Office Jet J4550 and windows 7 (64bit). When ever I open the solution center, the solution center says " HP office jet J4550 series disconnected" When I open HP document manager, I can access the printer.  Additionally, when I run the HP Print Diagnostic Utility 4.0, it sees the printer, no issues. I can print test pages. No issues. I downloaded the latest driver from the HP site (OJJ4500_Full_13, 299,359KB) Your insight is appreciated.
    Thank you
    Roy B

    I have a similar problem with the J4580 and my new Windows 7 64-bit laptop.  HP Solution Center says that the printer is disconnected.  Furthermore, it can print some documents (short ones), but it was unable to print a 1-page 5MB pdf file.  The printer truncated the page after printing just the top 10%.   The printer is OK with my wife's Windows 7 32-bit laptop.
    I've seen many other people complain about similar problems in this and other forums.  Apparently the driver for J4500 printers is not compatible with Windows 7 64-bit.  Can HP please provide an updated driver or patch?

  • How to print borderless with HP Office Jet Pro 8100?

    HP Office Jet Pro 8100 printer
     I changed the setting to borderless in the advanced setting but still got borders on the picture.

    Thank you for the additional information.  It is exactly what I needed.
    Here is the Full Feature Software and Driver for the printer.  Install it to see if it solves your problem.
    Please click the " Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Terrible printing issues with HP Office Jet Prop 8500

    Printer is printing sloppily and some lines unreadible.  We did every aspect of cleaning c artridges and alighments, nothing hass changed.  We use only GENUJINE ink cartridges and even switched one out.  Printing just as bad.  What else do we need to do?

    Hi @NYSWDA 
    I would be happy to help you with your officejet 8500. I understand the print quality is currently poor despite your efforts thus far. Please use the following document to troubleshoot the issue; Fixing Print Quality Problems for the HP Officejet Pro 8500A e-All-in-One Printer Series.
    If you reach Solution seven and the issue persists, please call us, we will have in and out of warranty options available; If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check. 
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • How to enlarge print copies on HP Office Jet 6600?

    How?

    Hello @m2weiss ,
    Welcome to the HP forums.
    Do you mean, how do I make a copy that is larger then the original?
    Or did you want to know how to print from your computer, and make the font larger?
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • Problems With my Office Jet 7500A

    Im getting error message on printer screen when I select Print Email Address that the printer was unable to connect to the server.  I confirmed that my printer is connected by printing wirelessly but I cannot retrieve my printer email address.'
    Help!

    Can you access the Internet from the front of the printer (thorough apps)?  If so, that is good.  If not, enable apps and try again.
    Now, let's set a static IP address for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 254 (the last number in the address). If you do not know this, enter the current IP address.
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter the router IP address for the gateway and the first DNS entry.  Leave the second blank.
    - Click 'Apply'
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I have a Office Jet 6600 and cannot get it to print. I have power to the monitor.

    I have an HP Office Jet 6600 and it stopped printing. I use HP ink 932xl and 933xl. The message on my  computer is: Missing or failed print head. The print head appears to be missing, incorrectly installed or incompatible. The monotor states: There is a problem with the printer or the ink system. Turn the printer off, than on. If the problem persis contact HP. So please tell how I can get my printer to work. This problem start about 3 weeks ago but I was out of the country  for 12 days. I rebooted the desk top and ended up with 1 print job but than this famous message became trapped in my computer. 

    Here are the specs for your HP Pavilion p6-2127c Desktop Computer. Based on the specs, your computer has one DVI-D (digital) out and one VGA (analog) out. No adapter is going to change the DVI-D to VGA.
    (#1) - DVI-D (digital out only)     (#2) - VGA (analog out only)
    Using a VGA analog "dual tail adapter" won't work either. With both monitors connected to the VGA port, your computer won't be able to identify the correct monitor settings because of communications conflicts between the devices. This setup will only work with one DVI-D monitor and one VGA monitor.
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • How to enlarge picture on my hp office jet 6600 all in one printer

    how do i enlarge pictures from my hp office jet 6600 all in one printer

    Hi,
    Are you talking about copy, scan or print ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have an ipad2 and we purchased an HP office jet 6600.  I can not connect to print.  In searching the net, I have been advised to get the firmware update but can not find it.  Can you advise?

    I have an ipad2 and we purchased an HP office jet 6600.  I can not connect to print.  In searching the net, I have been advised to get the firmware update but can not find it.  Can you advise?

    Is the HP on the airprint list?
    iOS AirPrint Printers  http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
     Cheers, Tom

  • My iPad will not print to my wireless hp office jet 6600 anymore

    MY iPad will no longer print to my wireless hp office jet 6600 printer

    Hi Everyone,
    Don't spend too much time trying to figure this out.  Apple has total control of what apple products can do.  Since the upgrade to IOS my 6600 HP printer no longer is recognized by my Ipad.  Just to add insult to injury my Iphone's wifi is now greyed out and I can no longer use wifi.
    I didn't see this coming but think about how apple can force you to upgrade to other products by simply limiting a device's capability through an operating system upgrade.
    I made an appointment with an Apple genius today and they said "Sorry this is a hardware issue (Iphone) and you will need to upgrade."  Of course I will, a $700 phone or Ipad should only last a couple of years... right?
    I am not upset but I will be more critical in my future purchases of Apple products.

  • How to set up Hp office jet 6600 to print from the iPad air? In a wifi setting.

    How can I print from iPad air to the HP office jet 6600?

    Hi Big-apple
    Check out the link below....
    http://www8.hp.com/ie/en/support-topics/mobile-printing/how-to-print-mobile-devices-ipad-iphone.html
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • I have a hp office jet 6600. It will not wake up to receive e-print.

    I just bought a office Jett 6600. It will only recieve E-print when it is awake. The print will not wake up to receive eprint. Not much good if i am traveling. <script id="JSScriptForDynamicControls" type="text/javascript" src="https://www.billeo.com/page/js/amex/insitedominspector.js"></script>

    I would make sure printer is plugged directly into a wall outlet. I would also make sure that printer had latest firmware update.

  • I am having a problem getting my office jet pro 8500 to go online to print. How do i set it to go on

    I am having a problem getting my office jet pro 8500 to go online to print. How do i set it to go online. I have run all of hp's diagnostics and everything passes. it prints the test pages but will not print any other jobs for me.

    This might help - https://discussions.apple.com/docs/DOC-3792

Maybe you are looking for

  • ASA 5505 Site to Site IPSec VPN WILL NOT CONNECT

    I've spent 2 days already trying to get 2 ASA 5505's to connect using an IPSec vpn tunnel. I cannot seem to figure out what im doing wrong, im using 192.168.97.0 and 192.168.100.0 as my internal networks that i'm trying to connect over a directly con

  • JMS Adpater Error

    Hi all I configure the JMS receiver Adpater of webSphereMQ but i got the error as followed: <b>Receiver channel. Details: MQJMS2005: failed to create MQQueueManager for '172.31.235.100:QM_Test'</b> I have a doubt: The XI and MQ are in the same server

  • ORACLE instance terminated. Disconnection forced

    Hi, When I am trying to login , it is throwing "ORACLE instance terminated. Disconnection forced" Below is the message logged in ALERT Log Completed: ALTER ROLLBACK SEGMENT RBSL1 OFFLINE Sun Jun 23 00:42:35 2013 Errors in file D:\HA_salesupp\Dump_fil

  • Problem with Xsan 2.1.1 and Mac Os server 10.5.6

    Hi, We have a big problem with xsan 2.1.1 and Mac Os server 10.5.6. - We have one server, is a Open Directory Master, and also is a metadata controller of xsan2. The Volumes of xsan2 are shares via afp, and the clients (moreless 50) connect with serv

  • CS6 Bug Report: Pen tool points offset from cursor

    Hello, I want to report the current behavior change of the pen tool. In current and older versions, clicking with the pen tool on the canvas, created a point that was exactly centered with the cursor's center point, as expected. Now, in Photoshop CS6