Printer profiles with LR 1.3, Leopard and R800

Hi all. I'm printing from LR 1.3 in Leopard to an Epson R800. I've downloaded and installed the updated print driver from Epson (3.09). when I try to load a color profile I get:
"The custom profile selected for this print job is missing or invalid. If you continue this print job, the colors will not be managed by Lightroom."
It gives me the option of continuing, which I did not take advantage of. The driver works and prints look good when they're managed by printer, so I could just stick with that. But I thought I'd try to figure out what's going on and maybe learn something in the process. I've read through some other threads, seen talk of Carbon vs. Cocoa, but some of it goes over my head. So here's my questions, and forgive me if I sound dumb, but you know the old saying, there's no such thing as a dumb questions, only dumb answers:
Are the profiles separate from the driver? Do I have to download new profiles for Leopard / LR 1.3? Are there new profiles anywhere? or how do I figure out what happened to the old profiles, which worked in Tiger? What is the advantage of letting the app manage colors instead of the printer anyway?
Thanks in advance. With your help, I'm finally getting my workflow back to where it was before this Leopard thing!
Regards,
Dave

John,
In the case of the R800, 3.0 has been around for about one year. However, 3.09 was first posted to Epson Europe on 29 October 07 and 6 November 07 to Epson Oceania (Australia and New Zealand). The driver is supposed to be fully compatible with Leopard, but I have no way of checking. According to both Europe and Oceania, drivers for the remaining R series printers (1800, 1900 and 2400) are due out later this month.

Similar Messages

Printing problem with Photoshop CS 6 extended and HP printer

Hi all, long time browser, first time poster.
This is a weird issue, it should be noted from the first that I only have weird computer issues. I work at a technical High School where we have the whole Adobe CS6 Extended suite installed. We are running it under a fully patched version of Windows 7 and all the CS6 updates have been applied on 25 machines that all have the same issue. The problem is that when the students go to print to our HP Color Laser jet CP6015DN, the job can been seen loading into the queue, it races up to about 45MB, then sort of strolls to load the rest of the document, usually about 59 to 75 MB's in size. Then I watch the message go to processing, the front panel of the printer says processing, then the print job disappears from the printer queue and the printer and there is no print out. I printed out the usage job log and it shows none of the failed attempts to print and I check the event log page which does not show the errors either.
Looks like a bad printer driver, right? So I download the new HP Universal printer driver, I normally do not do the Universal driver route as so many of my older printers have problems with it, but the CP6015DN seems to have trouble accessing the extended tray 5 with the specific drivers, but I have the same printing issue with the new Universal driver and the PS driver. So I wander through the HP manual and it suggests using profiles to print to the printer and move the color handling from Printer Manages Colors to Photoshop manages colors and I track down the ICC profiles for the printer on the HP site as the link in the book is dead, so try the CP6015srgb_d50.icc, CP6015_cmyk_d50.icc and CP6015.icc, I try all of these profiles with the newest PS printer driver and the same error, goes to the printer and into the bit bucket. Still no printout or error message.
Strange thing is that if I do a test print, it prints fine, if I open a tif file in Photoshop, it prints fine, now the teacher says if they print to the Xeorx 7760 in the next room, it also prints out fine. It should be noted that we had so many issues with configuring the Xerox and adjusting controls it was the reason we purchased a HP proofing printer in the first place. But the next door lab is all Apple, which doesn't seem to have this issue. So I open the test document and save it as a PDF file instead the native Photoshop format, and it prints fine, which from what I've been reading on the internet may be the preferred way of printing proofs, I don't know, I've never really used Photoshop, but the teacher says this isn't an acceptable fix and the students should be expected to manage a number of revisions saved to PDF format, me I just go up a number at the end of the file name for every correction when editing documents.
Any suggestions you have would be appreciated.
Windows 7 X64
Photoshop version 13.0.1 x64
HP Color Laserjet CP6015 DN model number Q3932A
Dell Optiplex 980 i5-650, 3.2Ghz, 8 GB RAM.

Yes, Photoshop is up to date at Version 13.0.6. I have even gone so far as to uninstall CS 6 and put CS 5 back on and still the same thing. This is really frustrating, the people at Canon try to be helpful but wind up saying it's an Adobe problem and of course you can't talk to real people anymore about CS 6. My research on the Internet has turned up nothing so I'm stuck.

Trying to update iMac G5 with OS X Snow Leopard and unable due to no Intel proccesor. Are all new upgrades going to be unavailable? What is the last available upgrade?

I'm trying to update my parent's iMac G5 with OS X Snow Leopard and unable to do so because it doesn't have an Intel processor. Are all new upgrades going to be unavailable? What is the last available upgrade? Is it possible to get an Intel processor installed?
Thank you
Lindsay

Actually you can upgrade to snow leopard. I have an iMac G4 and upgraded to snow leopard by installing it using an external DVD RW drive. It was complicated but it worked. I ended up going back to using tiger though. I liked it better the simple old school way.

How to wipe off everything from my 15 MacBook Pro? I bought my Mac in Middle 2010. It was with OS X Snow Leopard, and a few months ago, I installed the Lion, so I couldn't just insert the CD and reinstall.

How to wipe off everything from my 15 MacBook Pro? I bought my Mac in Middle 2010. It was with OS X Snow Leopard, and a few months ago, I installed the Lion, so I couldn't just insert the CD and reinstall.

Yes, you can and should. The DVD belong with the MBP. You should use the original DVD to erase the disk and install Snow Leopard prior to sale.
You can't sell it with Lion because it is authorized under your user ID.
Allan

Printing Success with Aperture 1.5.2 and HP Photosmart Pro B9180

With so many "hit-and-miss" posts regarding printing, I thought I'd post my result with Aperture 1.5.2 and my newly-acquired HP Photosmart Pro B9180.
Firstly, I have my monitor calibrated using ColorVision's Spyder Express. It's a cost-effective solution to monitor calibration and what I see on the screen is what I'm seeing in the print. I calibrate weekly.
Secondly, I'm using HP's Advanced Photo Glossy Paper for prints. HP provides the ICC profiles for their papers (and thus far, they seem to be dead-on accurate).
Thirdly, and I believe this is where issues can occur, is to set, via the Print Driver, color management as Application Managed. This bypasses the default of allowing the printer to manage color for you. This allows Aperture to use the ICC profile of the printer and calculate the proper color "conversion".
Finally, via the Apple's support article on optiziming print (http://docs.info.apple.com/article.html?artnum=302821) save the customized printer setup for a specified print size, paper, etc.
I have made 20 prints thus far and all have come out satisfactory. The only "tip" I'd make is that I noticed the gamma setting in the print dialogue is ideally set at 1.15. Otherwise, the print seems to be a bit dark.
PowerMac G5 Dual 2GHz Mac OS X (10.4.9) 4 Gigs RAM, CalDigit S2VR Duo 1TB

I just got a B9180 too so thought I would try printing from Aperture. As you suggested I set Gamma to 1.15 - but I still feel the prints are a bit dark. Tried 1.20 but that looked identical to 1.15!

Printing differences with LR4+ between Windows 8 and iMac

Hi. I have using my iMac running the latest version of OS-X with LR printing currently to an Epson XP-600 with pretty good results, that is, the print matches the screen with few exceptions.
I recently installed my second allowable copy of LR4 to a new HP laptop running Windows 8 and the prints, using the same photos, are way off both in darkness and in color shift. The Printer interfaces look different but many of the options are the same. I currently let the printer control the prints (with either computer) but tried separate profiles as well. No real change. Here is the important part... The only other program I have on the new Laptop that can print photos is Microsoft PowerPoint and the photos printed with PowerPoint are identical to the photos printed in LR on the iMac! So... somehow the Windows LR is changing the parameters.
I have compared settings between the two computers (only one opened at a time) over and over and ran through a set of ink cartridges trying to match either LR/iMac or Windows PowerPoint to the LR Windows photos to no avail. Am I missing something obvious? Why don't the LRs print the same with the same settings regardless of the operating system? Both are 64 bit computers. Any thoughts would be appreciated... thanks! Andy

Thank you for replying, Rikk. However I respectfully disagree with you. I wasn't comparing the printed photo to the laptop monitor but to the other computer's printed photo (and to the iMac's monitor by extension). Big difference. I deliberately let the printer manage color because with the iMac, the print matched the monitor without profile control. In Windows, I also let the printer manage color so LR, let alone the monitor, should have no influence on color, much like the PowerPoint print as you mentioned. The printer, if printer settings are the same, should produce the same print in OS-X or Windows 8. The PowerPoint print matching the LR print on the Mac proves this to be true IMHO.
To put it another way, I'm not trying to match the Windows print to the Laptop monitor, which is not only uncalibrated but somewhat irrelevant. The two monitors look nothing alike with regard to color. Neither monitor should actually influence the print when compared to the other print using identical printer settings with LR set to printer control.
Please do not think I'm trying to be contentious here, I'm not, but to put it a third way, If I print the photo from another program (iPhoto) on the iMac, it looks identical to the print in LR on the iMac. Because the printer is in control. On the Windows computer, printing in and out of LR, with printer settings the same, do not. That's what I'm trying to find out.
Finally with respect to your last sentence, that's my whole point. I believed I had turned off color awareness in LR on both computers. I don't need it. Apparently, I didn't turn it off on the Windows computer and I would love to know why it didn't go off?
Thanks, Andy
PS You deserve an explanation as to why I use the printer control and no profiles. The answer is somewhat serendipitous: With this particular printer (and I've had many), when the printer is set to manage the color, the prints, for whatever reason, very closely match the iMac monitor (which is calibrated), even moreso than with printer color OFF and ICC profiles employed. I've tried them all. I only use one kind of paper. If I call up a photo of my grandchildren, the print matches the iMac display close enough for my needs. What I see is what I print. Why change it?

Printer Driver for Epson Stylus R800 Printer Included with OS X 5 Leopard

How many faulty drivers may there be included with OS X 5 Leopard?
After installing OS X 5 Leopard I found that when using my Epson Stylus PHOTO R800 printer photograph prints and ordinary lettering were extremely feint and unusable.
From the list of printers installed with OS X 5, as given in Apple "K"base Documents, I checked the version number of the driver for the Stylus Photo R800 and it was given as "SPR800 3.09 app"
I next checked the latest driver specified by Epson on their website---it too was given as
"SPR800 3.09 app".
Despite this information I downloaded the "SPR800 3.09 app" from Epson and installed it and the problem was solved.
I am writing this to inform others that despite the driver included with OS X 5 being specified as
"SPR800 3.09 3.09" it certainly is not!!!
The only answer is to use the latest version provided on the Epson website.

Dear scb
Many thanks for taking the time to reply to my post, you are so right in your remarks.
Although I've been on Macs for around 25 years I hadn't come across something as blatant as this before---maybe I've been lucky!
Your comment regarding the avoidance of software included with the product is very relevant particularly at the present time, so soon after the release of OS X 5 Leopard. There must be thousands of printers and the like which are being sold right now with software applicable to OS X 4 Tiger included with them.
DLS

(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.

With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

Printing Problem with Epson LX-300+ii and LX-310 in Windows Server 2012 R2 64-bit

I recently installed Windows Server 2012 R2 64-Bit.
We have Printer Epson LX-300+ii and LX-310 (dot-matrix) that we share among users. Each user access the Server using Remote Desktop. From previous experience with Windows Server 2008, I knew that these printers will be problematic, especially regarding
the Easy Print driver.
And I was right, using the Easy Print driver, I got the following result:
And so, I did manual mapping & disable the "Use Remote Desktop Easy Print printer driver first". Haha, what a surprise, I got the following result:
And so I uninstalled the printer driver, and install it again, thinking that I might chose a wrong driver, but.... same result. I know for sure that I chose the correct driver.
Next, I tried connecting the printer DIRECTLY to the server. Log-in to the Server directly,
not using Remote Desktop. And tried printing again, haha... really... what a surprise... I got the same problem here !!!
So now I know the problem is not the Easy Print driver, not mapping or registry problem either. It's the print driver. This is SUPER FRUSTRATING, I tried the same driver from the same CD in Windows 8.1 64-Bit with no problem. I tried it too in Windows 7
32-Bit with no-problem either. But somehow, this driver is problematic in Windows Server 2012 R2.
Any help? Anybody else bump into this same problem ? I'm close to giving up, been spending too much time figuring out this damn thing.
Andy

Hi Bulent Sahin,
Thank you for your reply, I tried IBM Graphics driver, but the result is equally as bad. But your answer inspire me to try different drivers. And so, the closest & best driver that I could use now is EPSON ESC/P 9pin V4 Class Driver
It's not as good as I would expect, but at least now, it's acceptable & readable. I can't believe that I'm the only one who have this problem
Thank you Mr. Sahin

Printing impossib between Macbook pro OSX Leopard and Canon LBP5000 printer

I couldnot print using Mas OSX leopard and Canon LBP 5000 printer. If any one have a driver solution. Thanks and regards. Michel.

Hi all... it's the ninth... at least where i'm from. wondering if canon has released the drive. we're stuck in the middle of nowhere because of this driver issue. terrible. terrible. paid good money for leopard only to have major hiccups like this explode in my face. sigh.
HEEEELLLPPPPP!!!!! apple? any ideas??? canon??? any support?
please teach leopard canon lbp5000's language. don't break them up. they used to date very nicely.

No luck with printer recognition with airpot express, please read and help

I have 3 macs and 1 pc running vista, my 3 macs print perfectly through airpot express. I installed the airport cd on my pc, but i cant print, Im no good with windows, i was wondering if you could walk me through the process.
I already clicked on add a printer but it wont find my printer, and my printer is connected to my airport express and its on, so, i dont get why it wont recognize it or why doesnt it work
please help

altairmactavish wrote:
I have 3 macs and 1 pc running vista, my 3 macs print perfectly through airpot express. I installed the airport cd on my pc, but i cant print, Im no good with windows, i was wondering if you could walk me through the process.
I already clicked on add a printer but it wont find my printer, and my printer is connected to my airport express and its on, so, i dont get why it wont recognize it or why doesnt it work
After you click on "Add a Printer", do you select "Add a Network, Wireless, or Bluetooth Printer"?
If that doesn't work, there should be a way to connect by specifying the IP address of your AirPort Express.

Problem with OS X.5 Leopard and printing through Airport USB printer

I have just upgraded to Leopard from Tiger and now I can't print. Previously, all 3 of my computers could print to my Samsung printer that is connected to the USB port of the Airport Extreme base station. They could see the Samsung printer through Bonjour and it worked great. Now my computers running Leopard can't see the printer on the wireless network. I've downloaded the latest driver from Samsung and that didn't help. When I connect the printer directly to my Mac tower it prints fine. However I don't want to have the tower on all the time, sharing the printer through the network. It seems to be an issue with Leopard + Bonjour + Airport base station.
Details:
I have a G5 Tower connected via ethernet to the Airport router.
I also have an intel Mac Mini and a G4 Powerbook 1.67 connected to the Airport through wireless.
The Samsung laser printer is connected to the USB port on the Airport base station.

I too have been bit by the Leopard/wireless printing bug....
Originally, we had two older iMacs running Tiger; both printing to a Lexmark X502n wirelessly via an Airport Express. The set up worked flawlessly for approx. 15 months. A couple of weeks ago, I upgraded to a new (beautiful!) 24" iMac running Leopard. I can print one document, and then like the other posters, the printer shows it's printing, but the printer goes to pause and says it can not connect with host. The Express is on green light, and all the settings are there in the Airport Utility. If I go through the process to "discover" in the Airport Utility, I can then print another page.
But - once the new iMac goes into "printer pause" and needs to be reset, the other older iMac can no longer print. If I reset everything on the new iMac, the other iMac can print as usual - until I print from the new iMac. Lexmark still has no drivers available for this model and Leopard. Past postings on various boards projected they would be available by mid-2008. Obviously, that has not happened. I have contacted Lexmark and they tell me they don't know when drivers will be available. I spent most the day yesterday on the phone with 3 different people at Apple Care. No help other than to say I need the new drivers.
I'd move the laser printer over by my computer and connect via USB, but it is also our fax machine and on a dedicated line. Since we only have the one jack for the second phone line, moving the printer is not an option.
Any help appreciated! I'm ready to go out and buy new cartridges for my old trusty HP inkjet....
The new iMac is connected to a D-Link WBR-2310.
The airport express is connected to the Lexmark X502n via USB.
The wireless network is not secured.

Officejet Pro 8600 wireless print option with Mac OSX Snow Leopard?

Hi My 'old' 8600 printer died and I purchased a new one. I did not set up wireless communication with the old printer but am interested in doing so with this new one, or at least having that option.
I'm running Mac OS X 10.6.8 Snow Leopard. The installation CD that came with the new printer says it's for OS X v10.6, Lion or Mountain Lion. Is it compatible with my system?
Thanks!

Hello KelliMK, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are looking into compatibility information. The Officejet Pro 8600 is compatible with Mac OS X 10.6. The software disc should allow the full install without issue.
As for the wireless setup, I would recommend following this document on HP Officejet Pro 8600 All-in-One Printer Series - Installing the Printer Software on a Wireless or W...
Please let me know if you have any questions. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

SMB Slow connection with upgrade to SnoW Leopard and Windows Clients.

<pre>
Dear,
I have now upgraded my MAC OS X LEOPARD 10,5,8 to new SNOW LEOPARD 10,6,2 and if some problems disappear I have a newer big one !
Now every time a Windows CLient try to connect to a SMB Share of SL server that take a long time about 10-15 seconds to open after that depending on client OS that could be nice for a moment (windows 7 and XP) or browsing stay very slow like for 2003 server connecting to Share on S.Leopard.
Could you please help me.
My SL are the main SMB share computer with all data it is connect like other clients to AD (SBS2003).
I have a SBS2003 server that are Master of Domain
and a Server 2008 acting like Terminal Server also member server of domain.
Here are kind of log I receive from SMBD.LOG: I suppose the Credentials problem when connecting are my explanation but how to avoid that !
2009/11/14 13:37:06, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/reply.c:reply_special(332)
netbios connect: name1=MACSRV name2=NOMAD
2009/11/14 13:37:06, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/reply.c:reply_special(339)
netbios connect: local=macsrv remote=nomad, name type = 0
2009/11/14 13:37:08, 2, pid=64794 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/auth/odsam.dylib' loaded
2009/11/14 13:37:10, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/sesssetup.c:setupnew_vcsession(1273)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
2009/11/14 13:37:10, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/auth/odsam.dylib' loaded
2009/11/14 13:37:18, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/sesssetup.c:setupnew_vcsession(1273)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
2009/11/14 13:37:28, 0, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/opendirectory.c:getopendirectoryauthenticator(247)
failed to read DomainAdmin credentials, err=67 fd=15 errno=2
2009/11/14 13:37:28, 0, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/opendirectory.c:opendirectoryuser_auth_and_sessionkey(580)
dsDoDirNodeAuthOnRecordType gave -14091 eDSAuthMethodNotSupported
2009/11/14 13:37:28, 0, pid=64803 /SourceCache/samba/samba-235/samba/source/auth/authodsam.c:opendirectory_smb_pwd_checkntlmv1(387)
opendirectoryuser_auth_and_sessionkey gave -14091 eDSAuthMethodNotSupported
2009/11/14 13:37:28, 0, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/opendirectory.c:getopendirectoryauthenticator(247)
failed to read DomainAdmin credentials, err=67 fd=28 errno=2
2009/11/14 13:37:28, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/auth/auth.c:checkntlmpassword(309)
checkntlmpassword: authentication for user fabrice -> fabrice -> fabrice succeeded
2009/11/14 13:37:28, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/vfs/darwin_streams.dylib' loaded
2009/11/14 13:37:28, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/vfs/darwinacl.dylib' loaded
2009/11/14 13:37:28, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/vfs/notify_kqueue.dylib' loaded
2009/11/14 13:37:28, 1, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/service.c:makeconnectionsnum(1092)
nomad (192.168.2.20) connect to service NetDown initially as user fabrice (uid=501, gid=20) (pid 64803)
I also have some kind of following message:
2009/11/14 13:35:18, 0, pid=64579 /SourceCache/samba/samba-235/samba/source/lib/utilsock.c:readdata(534)
read_data: read failure for 4 bytes to client 192.168.2.20. Error = Connection reset by peer
NOte that initialy I don't have problem with MAC OS Client but to be sure they use SMB I have desactived AFP server on SNOW LEOPARD SERVER and now they can't browse the share in finder but when connection via COMMAND+K and SMB://server/share that give now the same error but a little bit faster than windows clients.
Could you help me to troubleshout that problem ?
Thanks for your help.
Felee
</pre>

Dear CarlosGBA,
So when you put 2 computers of your network in WORKGROUP in place of DOMAIN the 38 others works fine ? Strange ?
I have about 15 computers, some are already in workgroup other are linux smb other MAC, the data server are MAC OS X SL, the problem appear for all windows machines, I have try to dissable NTLMV2 and Kerberos since it is probably the faulty element with opendirectory,but always without success !
I don't know what I can do to trouble shout, I hope next release 10.6.3 come soon and correct about all SMB problem ! Probably a dream only ! Since I ask my self if Apple want to correct something andwhy is this problem let without solutionso long ! For a company it is a big problem.I suppose that Apple never read this forum and never answer our problem ! May be I should contact the support phone to be helped !
Thanks for you help.

HP 6210 printer problems with upgrade to Snow Leopard

I have recently bought a new Macbook Pro with Snow Leapard and my HP printer 6210 gets errors when I try to print. (It worked fine with the old 10.5.x. OSX) I have uninstalled the old HP software, then installed the most current from the HP website and then done an Apple Software update. The error messages are:
E [20/Sep/2011:16:54:45 -0400] Unable to execute /Library/Printers/hp/cups/filters/commandtohp.filter/Contents/MacOS/commandtohp : no execute permissions (0100664)
E [20/Sep/2011:16:54:45 -0400] [Job 96] Unable to start filter "/Library/Printers/hp/cups/filters/commandtohp.filter/Contents/MacOS/commandtoh p" - Operation not permitted.
E [20/Sep/2011:16:54:45 -0400] [Job 96] Stopping job because the scheduler could not execute a filter.
E [20/Sep/2011:16:54:49 -0400] Unable to execute /Library/Printers/hp/cups/Inkjet6.driver/Contents/MacOS/Inkjet6: no execute permissions (0100664)
E [20/Sep/2011:16:54:49 -0400] [Job 97] Unable to start filter "/Library/Printers/hp/cups/Inkjet6.driver/Contents/MacOS/Inkjet6" - Operation not permitted.
E [20/Sep/2011:16:54:49 -0400] [Job 97] Stopping job because the scheduler could not execute a filter.
E [20/Sep/2011:16:59:50 -0400] [Job 97] Stopping unresponsive job!
If anyone can help me get this running, I would greatly appreciate it!
PS: The scanner works fine and I can print "test" pages and use the printer utilities.
Thanks!
Bradley

Thanks to a posting from a similar problem about an HP Photosmart 2610, I was able get my problem solved:
I deleted the folder
/Library/Printers/hp
then restarted in "Safe Boot" mode to empty the trash, then I rebooted in normal mode.
Then I reinstalled the HP software and rebooted.
Then I did Software Update and rebooted.
Now everything works fine!

Printer profiles with LR 1.3, Leopard and R800

Similar Messages

Maybe you are looking for