Printer Properties Flashes and doesn't open

Hello Everyone,
I am working in domain network and i had connected HP M1530 MFP shared printer. The printer is well connected and showing online but, when i try to click on properties after using Ctrl+P it was just flashing once and not opening the properties.
any help will be appreciable.
Regards,
Prakash

What happens if you open the properties under "Devices and Printers"?
What happens if you open properties by Ctrl +P, right click the printer>run as administrator>properties?
It can be related with permissions, please take a look of this link
Why can't I change the printer properties?
http://windows.microsoft.com/en-in/windows-vista/why-cant-i-change-the-printer-properties
Regards
Yolanda Zhu
TechNet Community Support

Similar Messages

When l plug my ipad into my computer it just shows files from the ipad. And doesn't open itunes.

When l plug my ipad into my computer it just shows files from the ipad. And doesn't open itunes...Help???

Check for Update (tap to enlarge image)

My airport express seems to be broken -- light is yellow and does not flash and doesn't change even when I press the "reset". Tried unplugging and reset -- still a solid yellow.

AX light is yellow and does not flash and doesn't change even when I press the "reset". Tried unplugging and reset -- still a solid yellow. I assume this is a goner?

Unfortunately, based on your description, I would have to second that your Express is a "goner." However, before giving up on the unit, be sure that you attempt a "factory default" reset at least 3x just to be sure.

My ipod 4g is running slow and doesn't open some apps what should I do ?

my ipod 4g is running slow and doesn't open some apps and close the when i am working on them what should I do ?

Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
Next try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT201401 Iphone 3GS screen flashes and doesn't display

Hi there
i have been given a Iphone 3gs 16Gb from a friend as they have upgraded to a nexus 4 and the screen connecter was damaged so i have now replaced the LCD with a new one now the screen flashes and doesn't show anything on the screen
there is no display at all not dark or dim display i have no idea if the screen is working but i have got two so called new screens and both are the same
i have recovered the Iphone as it connnects to Itunes and appears to fuction correctly with out any problems just not able to see what is on the screen touchscreen is working fine too as i was able to switch the iphone off as my friend had left a passcode on the phone so i put the phone into recovery mode from been on and recovered the phone
im out of ideas now please help
Thanks
Simon

Hi All
the iphone is now not displaying anything there is no flash or anything on the screen i have checked the 6r8 coil and it looks fine
the phone still connects to itunes and appers to work as normal but im unable to see any display so im unable to set it up so i can ring the phone and check
thanks
Simon

Outlook "Manage Rules and Alerts" flashes and wont fully open

Hi ,
one of my custom got a tricky problem. His rules flashes on every PC. have tried change pc, reinstall outlook for several version (2k3,2k10,2k13). For server side, Exchange2010, have tried move user to another mailboxdabase. but nothing worked.
Each time i click "manage Rules and alerts", a log will recorded in windows app log "operation fail", Event id 27(not sure the exact words in english version. it is “操作失败” in chinese). detail message :
System
Provider
[ Name]
Outlook
EventID
27
[ Qualifiers]
16384
Level
4
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-04-08T00:58:05.000000000Z
EventRecordID
740183
Channel
Application
Computer
XXXXXXXXXXX.com
Security
EventData
操作失败。
I think it is a server-side problem, until i found OWA works fine. which really drive me crazy.
after some google, and search in forum, i found a similar thread: http://social.technet.microsoft.com/Forums/office/en-US/f6b75a36-9af9-4153-a5f9-57061a5729c0/outlook-2010-manage-rules-and-alerts-only-flashes-and-wont-fully-open?forum=exchangesvrclientslegacy
After follow the advise to delete all rules via MFCMAPI tool, seems still not help. i could only post a question here.
thanks for any advise
Go Patriots

Glad to hear that. For the "Stop Processing More Rules", you can refer:
http://www.outlook-tips.net/tips/tip-42-stop-processing-more-rules/
http://www.msoutlook.info/question/340
Best Regards,
Steve Fan
TechNet Community Support

Hello i have 11.2 iMac and i installed 16 gb ram it beefs and doesn't opens

hello i have 11.2 iMac and i installed 16 gb ram 4x4 corsair 1x204 pin ddr3 1333mhz but when i installed and open my computer it beefs and doesn't opens how can i solve this problem i installed old rams again ant it works fine

Go to a site from Mac specialists such as Crucial or OWC, http://www.macsales.com and find the ram for your iMac and see what they recommend. Then compare with what you installed, you said Corsair, and see if it matches. You need to send the ram back you bought for a refund or for replacement with the correct ram or ram that will work.
dwb is correct, either you bought the wrong ram or the ram is defective. Either way it will not work.

My video playback out...every video shakes/flashes/doesn't play right. What's wrong? I thought the hard drive was too full, but I just deleted 125gigs, rebooted and it still flashes and doesn't play videos. This is true for youtube, ads, foxnews videos...

My video playback out...every video shakes/flashes/doesn't play right. What's wrong? I thought the hard drive was too full, but I just deleted 125gigs, rebooted and it still flashes and doesn't play videos. This is true for youtube, ads, foxnews videos...

Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
Is there an easier way?

Adobe flash player doesn't open

when i open adobe flash player it doesn't open and it is 777.2 kb why?

This forum deals with questions about Adobe Digital Editions, not Flash
Player. Sorry!
===============

Printing ALWAYS pauses and doesn't Resume.

I have a Macbook Air and own a Samsung SCX-4200 printer. Everything was working well, but suddenly it's stopped working. Every time I try to print something, it opens the Printer icon below and it Pauses......
Thats it, it's stuck over there, even if I manually Resume, then too it doesn't work. I tried to again put the printer back via System Preferences, but it just doesn't work...
PLEASE can someone post a solution if they know. Re-installing the OS is out of question and I don't want to buy a new printer!!!!
I have searched the net and there are soooo many same issues, but none have a working answer. Apple should know about this issue since my PC is working fine and printing well.
PLEASE IT'S URGENT!!!!

No man, the thing worked perfectly about a week ago. But just 3-4 days back, I ran a software update test and it found a bunch of items (Java update, some security pathc, latest iTunes, latest Safari...) which I allowed it to install. Thats it, but I didn't try to print anything after that since I didn't want any.
Oh and now next to my name I see a (3) meaning when I open Finder and look on the left to my Mac name it says XXX (3)... It didn't say (3) before that, I wonder if that is causing the issue... and no, no one has tampered with my Mac....
Oh and this has happened before... first when I bought, everything was working great. Then suddenly it stopped printing (above problem). Then just a month back my Fan stopped working so I sent it to the Apple guys and they returned my MacBook Air and at that time it had (2) besides my name and it printed everything... Now it's stopped. Oh and I have Windows installed on my Mac via bootcamp and it's printing documents fine... It's just a pain to switch from Mac to Win just for printing.. Besides, Win doesn't even recognize Pages and number format besides converting them to .doc or .xls.

FF doesn't open a new window , and doesn't open at all when I close it and try to open it again.

Initially when I start my PC Windows 7 Ultimate , FF opens fine , but it doesn't open a new window when I click on the option "Open a new Window " in the taskbar .When I right-click a tab and select the option "Move to a new Window" then too it doesn't work. Next when I close FF and and try to reopen it , it doesn't open at all.I have FF v34.0.5.

Gnome-shell issue. You can disable desktop management as a temporary fix, but the next gnome-shell update will fix the problem.
https://bbs.archlinux.org/viewtopic.php?id=175993
https://bugzilla.gnome.org/show_bug.cgi?id=722510
https://bugzilla.gnome.org/show_bug.cgi?id=722690

I just bought lightroom 5 from the adobe website, and installated on my MAC OS 10.10.2 yosemite and doesn't open the application. Any help? My credit card has been already charged...

Hi,
I have just bought Lightroom 5 from the adobe website for my Mac os running yosemite 10.10.2. After the installation process I launched The application LR but doesn't open. It appears a message telling that there is no compatibility
any advice? thanks
Gianluca Italy

try installing lr 5.7.1:
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

Why the css properties panel it doesn't open?

The css properties panel in my trial version of Fireworks CS6, it doesn't open. May this be due to some limitations in trial version (which I wasn't aware of)?
Thank in advance

You scroll the camera icon up, not tap it.

Blackberry Curve 9300 3G: Problem with camera no flash and doesn;t take pictures

Hi!
I have a Blackberry Curve 9300 3G phone. Until recently my camera was working fine i.e. the camera took pics. However recently I can;t take pictures. I can access the camera screen I can zoom I can see old phots but when I click on the camera icon to take a pic there is no flash and no picutre is taken(as a side note tmy video works fine)
Any ideas of what may be the problem? Also is it a good idea to remove the battery to solve the problem and if I do so will alll my like memos, contacts etc be erased?
Thanks a lot!
Solved!
Go to Solution.

removing the battery may fix some glitches on the phone but it doe's erase files.
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Appleworks bounces once and doesn't open

I can't seem to get Appleworks to open- if I click on the icon or go to applications and click it there, it bounces once and then stops. It does not open. Any thoughts? It seems to be a different problem than recent "won't open" subjects. I have not changed it in any way or reloaded, etc.
I'm using version 6.2.9 on my ibook G4. Any help is greatly appreciated.

Scott,
You are having a problem with a completely different program, so your problem is not the same. Other than my suggestions to purplesally to use Disk Utility to repair permissions & to create a new Dock icon for AppleWorks, the solutions are unlikely to assist with a problem with Mail. Since we never heard back again from purplesally, we don't even know if those suggestions worked.
When looking for solutions to a problem to a specific program, the best place to start is a forum for that program or your operating system. For you I suggest the Printing & Faxing forum in the Category: Mac OS X v10.3 & earlier & then choosing the Mail & Address Book forum or the Using OS X forum.
However, some basic OS X troubleshooting/maintenance steps might help you. So, the first thing I suggest is repairing permissions using Disk Utility. Then, unless you leave your Mac on 24/7 & not asleep, run a utility to run the UNIX cron routines & clean caches. Two free ones are YASU & OnyX.
Also, make sure your hard drive isn't too full. It depends on how you use your computer, but for most normal users a minimum of 5 gigs free space at all times after installation is recommended. Power users may need more.
If this still doesn't work, repairing your hard drive with Disk Utility may help. Start up your Mac from the first Panther instal disk. Then, instead of running the installer, go to the Installer menu & choose Disk Utility. Select your hard drive in the left-hand panel & click Repair Disk. When it is done, quit Disk Utility then quit Installer & restart your Mac.

Printer Properties Flashes and doesn't open

Similar Messages

Maybe you are looking for