Printer Properties Pro vs. Printer Driver Profile

Hi,
Has anyone experience from switching from PPP to iPrints PDP (OES2 Linux)?
I want to stop using PPP. Is PDP working well with all kind of printers? I
got loads
of multifunctioning printer like Toshiba, Xerox, HP etc.
Regards,
A

Anders,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

IPrint Client: Printer Driver Profile Update

what would be the best way to Update a Printer Driver Profile with ZCM?
i published the Printer Policy with a new Version and checked "Update iPrint printer driver while installing the printer" for the Printer.
But this did not trigger the Update of the Device Settings.
However the User could delete the Device and after ZCM Agent refresh the Policy will install the missing Printer together with the Updated Profile.
Two side notes about iprint:
1. i set mistakenly install order to install iprint client before Novell Client on some Devices. This seems to lead to an authentication Prompt for logged users when the Printer Policy is about to install new Printers. This would not change if i update to the current Version 5.82.
btw. I prefer a Bundle to Update the iprint Client with 3 minutes delay after refresh just in case there is a printer Policy running. The Update will check \HKEY_LOCAL_MACHINE\SOFTWARE\Novell-iPrint Current Version as requirement.
2. I need to give users write Acess to C:\NDPS to make Printer Policies work right?!
This MAYBE cosmetic only but... i sometimes see inconsistent Printer Names. There is a "translation" of Server-Names under
HKEY_LOCAL_MACHINE\SOFTWARE\Novell-iPrint\Settings\Server Names\[Full qualified DNS server Name] to a short Server Name with TimeStamp.
Some Clients show the full server Name (ipp://...) others the nicer short-Name. Could not exactly reproduce but it seems that it resolve the short Name only if the local Admin installs the Printer.
best regards
Markus

drops,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

HP LaserJet Pro M1536dnf Multifunction Printer (unable to add print driver hpfax1, error code 87)

Hi, my printer HP LaserJet Pro M1536dnf Mfp, suddenly didnt work so i remove the printer, and downloaded a new driver http://support.hp.com/us-en/drivers/selfservice/HP-LaserJet-Pro-M1536-Multifunction-Printer-series/3974271/model/3974278#Z7_3054ICK0KGTE30AQO5O3KA30R1 once dowloaded, i run it and uninstall the printer, restart my pc, and proceed to installing. but in the process of installing a error occurr, saying that "Unable to add printer, error code 87", and that " HP Toolbox FX has encountered an error and can not recover. once i click ok. it tells me to restart my pc and reinstall it again. i did it for 8x, and still with the same error. please help really need a help right now. as my boss is going to kill me

Hey , Welcome to the HP Support Forums!
I understand that you're getting the error 'Unable to add print driver hpfax1, error code 87' when installing your HP LaserJet Pro M1536dnf Multifunction Printer on your Windows 7 computer. I would like to assist you today with resolving this install issue. Thank you for including all of the troubleshooting steps that you have completed prior to reaching out for support. At this time I am going to walk you through some additional software and driver troubleshooting steps. Please follow all of the steps below. If you're using your HP Laserjet through a USB Cable connection, please disconnect that cable now. Step one: Remove Driver: 1. Click on your Start menu 2. Select Control Panel 3. Select Programs and Features 4. When Programs and Features opens a list of programs installed on your computer will populate. Click on the 'Installed ON' tab at the top to change the date so the recently installed items show at the top. This will make it easier to manually locate the three HP Laserjet items you need to uninstall. 5. Next, look for the HP LJ M1530 MFP Series HP Scan, HPLaserJetHelp_LearnCenter, and HP LaserJet Professional M1530 MFP Series. If you see any 3 of these, or all 3 of these items, please click on them and select Uninstall. Once you have confirmed that those three items have been uninstalled, please close Programs and Features and proceed to the next step. Step 2: Clear Temp Files: Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.Close the Temp folder once it is emptiedRight click the Recycling Bin on your desktop and select Empty Recycling BinPlease proceed to the next step. Step 3: Download Installer Package: Please click here to download the Full Feature Installer package. Once the download is complete, click on the download to allow it to 'Run'An extraction should now automatically occur. Once the extraction is complete an installer window will open. Please close the installation window. You do not want to run the installation at this time. Step 4: Run Scrubber: To ensure that no trace of the HP Software and Driver package remain on your computer, I am going to have you run a Scrubber built into the installer package for your printer. Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens locate the 7z folder. Click on this folder to open it. This is the HP Laserjet Installer Click on the Utilities folder under the 7z folderDouble left click on Scrubber. It is an application which should launch the HP Uninstaller. Please follow the onscreen prompts to complete the uninstaller. Once the uninstall has completed please proceed to the next step. Be sure to Restart your computer if the uninstall process prompts you to. Step 5: Check Print Server Properties: Click on your Start menuClick on Devices and PrintersIn the Devices and Printers window look for your HP Laserjet. If you see it listed please right click on it and choose 'Delete' or 'Remove Device'. Next, click on any device listed under 'Printers and Faxes' once just to highlight itClick Print Server Properties at the top of the windowClick on the Drivers tabLook for your HP Laserjet driver. If you see it click on it and click Remove at the bottomClick Remove Driver OnlySelect OKSelect Apply and OK on the Print Server Properties windowClose Devices and Printers. Please proceed to the next step. Step 6: Run Disk Cleanup Utility: Click on your Start menuSelect All ProgramsSelect AccessoriesSelect System ToolsSelect Disk Cleanup Run a Disk Cleanup on the C DriveWhen prompted, check Downloaded Program files, Temporary Internet Files, Recycle Bin, Temporary Files, and Thumbnails Once the Disk Cleanup is complete, please proceed to the next step. Step 7: Run CCLeaner: To ensure that there are no malicious files on your computer or Registry conflicts on your computer I am going to have you run a CCLeaner before we install your printer. Please click here to download the CCLeaner Tool. Once the website opens select the link at the top for 'Free Download'. Once the download is complete please complete the Scan. Should multiple malicious files be found you may need to run the Scan multiple times to remove all malicious files. Once your system comes back as clean, please proceed to the last step. Step 8: Install Device: Please click here to download the Full Feature Installer package for your HP LaserjetOnce the download is complete please allow the download to RunPlease follow the onscreen prompts to install your HP LaserjetIf using a USB Cable connection please do not plug in the USB Cable until the installer window prompts you to Once the installation has completed successfully please test your machine to confirm that everything is functioning properly. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck!

Managing Color with LR and the Canon Pixma Pro 9000 10.1.2.0 printer driver

I would like help understanding how to manage color in LIghtroom with the Canon Pro 9000 10.1.2.0 printer driver. When I ask LR to manage color in the Printing Module Color Management Profile, it warns me to turn off the printer managing color. But I cannot find where to do this in the driver.
The Color Options menu in the driver gives an additional choice for "Color Mode", but there are no choices here except "Standard", "Linear" or "Tone". The only Canon documentation I can find shows a choice to turn off printer management here, but this driver doesn't give me that choice.
If I look in the driver's "Color Matching", I see only two choices: ColorSync or Vendor Matching. ColorSync brings up Canon profiles like "Pro9000 Fine Art Photo Rag", but selecting one of these gives a warning of unexpected results. This pushes me back to Vendor Matching. But is this turning off the printer driver and leaving it to Lightroom?
Right now, I am getting the best results from choosing "Managed by Printer" in LR's Color Management Profile, and setting "Color Matching" in the Canon driver to "Vendor Matching". If I instead choose one of the Canon profiles in LR's Color Management Profile (and it tells me to turn off the printer managing, which I cannot do), then my prints have a slightly bluer color cast.
Is there a way to turn off the printer managing color in this driver and turn this over to LR, or am I getting the best results possible with the printer managing color anyway?
I am using a 2.4 GHz Intel iMac with OS 10.5.4, 2 gigs SDRAM, standard ATI Radeon HD 2600 Pro video card. I downloaded the Canon printer driver from their website, so I assume this is the latest. there is another driver available at their website, but for a lower bit depth. Should I abandon the 10.1.2.0 for this other one? I work with Nikon D300 NEFs, and I assumed the higher bit depth printer driver will work better with these images.
Any help will be greatly appreciated!

Dear DYP: Unfortunately, those choices are not available in the 10.1.2.0 Canon Printer driver. There are only 2 radio buttons, ColorSync and Vendor Matching. ColorSync then provides a drop-down menu, with no choice for turning off the printer driver.
But I think I found the answer. I found a deeply buried FAQ on the Canon site (no direct URL; sorry!) Here it says:
"Issue: How do I disable the printer driver color correction when using the CUPS driver in Mac OS X 10.5.x?
Solution: Change color management options for printing (Mac OS X 10.5.x)
Change color management options for printing
Open the document you wish to print.
Click 'File' and then click 'Print.'
Note: If the Print window contains only two pop-up menus, click the triangle beside the Printer pop-up menu for expanded options.
Select 'Color Matching' from the Print Options pop-up menu.
Select 'ColorSync' if you want the application you are using, and not the printer driver, to control the color management of the printed output.
Note: If you are using Adobe Photoshop CS2 or CS3 and have selected 'Let Photoshop Determine Colors', the 'Color Matching' from the Print Options pop-up menu is automatically set to 'ColorSync.'
Select 'Vendor Matching' if you want the printer driver to control the color management of the printed output."
I tried it, and chose "Automatic" as a choice in ColorSync. The choices under "Color Options" are then greyed out, implying that the Canon driver is now turned off.
The prints came out great, with no color cast, and a little brighter than the printer managed prints.
So, Vendor Managed means printer manages, ColorSync means LR manages.
Thanks, everyone, for keeping me going on tracking this down!

Turning off color managment in Canon Pro-10 printer driver

Hi,
I am using Lightroom 5 to print to a Canon Pro-10 printer. How do I disable the color management in the printer driver. I have selected the appropriate canon PRO-10 profile in Lightroom and it says to turn off color management in the printer driver dialogue box but I don't see where / what to do

"my monitor has been calibrated"
I hear this all the time. It is the main reason I don't like all the calibration gadgets out there. You need to "calibrate" your monitor to what your printer is printing. Not some spec some gadget thinks it should be.
You need to know what the bias of the printer is. In this case Canon has put a reddish bias in it's printers to simulate a warm look. This condition will not be accounted for in calibration software or monkeys.
Get your brightness, contrast and grey-scale right and the rest will take care of itself. You can do the necessary corrections in LR to make up for, or leave as is, the warm tone from the printer.
BTW, you should be working in AdobeRGB or higher. Factoid, you can not get every color to match. This is not possibile. You are dealing with two completely different mediums. Light and dyes. Adjusting any color effects other colors as well.
EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

How do i print from iPhoto with Epson Stylus Pro 3800 Printer Driver v8.64

Please help...I'm a new user...how do i print- select paper Epson options and make colour adjustments using iphoto and Epson Stylus Pro 3800 with Printer Driver v8.64

Yes, do share your solution for others who may want to do the same with their special profiles and printers.

Adobe PDF Printer not working as print driver; 9.5.5 (pro) with Windows 7, 64 bit

I have installed, repaired, uninstalled and re-installed Acrobat Pro 9.5.5 on a newly formatted SSD with Windows 7, 64 bit on my desktop machine. The program was installed from Acrobat Pro 9.0.0 and updated within the program. I have the program also installed on my laptop, and the Adobe PDF Printer driver is working properly on my laptop.
On my desktop with the newly formatted SSD, the Adobe PDF printer driver is not working. Note that I am using the printer driver, and not any pdf creation techniques within MS Office or other programs.
When I go to the Adobe PDF printing preferences on my desktop, I only get a generic, two tab window open. When I print a file to this printer on my desktop machine, I do not get a window opening that asks where to create the pdf or what to name it, and I never see any files created. In MS Word, the Create PDF option under the Acrobat tab works and opens a dialog to ask the name and location to save, and then opens a PDF Maker progress window and properly creates the file. I can also save a file as an .eps or .ps file and use Distiller to create the pdf. However I cannot get the Adobe PDF printer driver in my Devices and Printers to work properly, although it works just fine on my laptop with the same program (Pro 9.5.5) and same Windows version (7, 64 bit).
Repairing, uninstalling and re-installing does not solve the problem. Acrotray.exe *32 process is running. Any ideas on why this won't run properly on my desktop, but will run on a similarly configured laptop?
On my laptop, I get a full, (7) tabl menu with all the normal options:

I found this answer from Deepak Chauhan on another forum, and it solved this problem!
Try this to add Adobe PDF printer manually on Windows 7, and Windows Vista.
If windows 7 is Enterprise or better edition: (Admin rights required)
Start>search for printmanagement.msc and open the print management module
Expand the print server and expand the computer name to see availbale printers, drivers and printer ports.
- from printers ensure there's no Adobe PDF printer, if there is delete it
- go to ports and delete the PDF ports (the ones ending in *.pdf)
- go to drivers and delete the PDF converter.
Take note if any errors occur, but continue with the following steps regardless.
If on windows 7 home edition, just goto start>Devices and Printers and ensure PDF pritner is not listed.
Then open the registry (if any erors deleting these keys happen, see below)
1: go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Printers
delete any adobe PDF printer subkey present
2: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors
delee the PDF port monitor if present
3: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers
again delete and pdf printer subkey
If any erros occur, you need to set the owner of the key to the currently logged in admin user, then ensure that user has full control.
Do this by right-click the key and selecting permissions, clicking on advanced, then the owner tab.
Once you've all that has been done, open a command line as administrator.
Copy and pate the following commands in order
1: net stop spooler
2: rundll32.exe setupapi.dll,InstallHinfSection AdobePDFPortMonitor 128 C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf
3: net start spooler
4:rundll32.exe printui.dll,PrintUIEntry /if /b "Adobe PDF" /f "C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf" /r "Documents\*.pdf" /m "Adobe PDF Converter"
That should set back the pdf printer.
This seemed to provide the link that provided the Adobe PDF Settings tab to the Adobe PDF Printing Preferences that was missing!

HP LaserJet Pro M1212nf MFP Printer Duplex Printing Driver

Hello,
I'm consdering about buying HP Laser Jet Pro M1212nf MFP Printer.
I feel like it's the printer that has all the specs that I need.... Except for automatic duplex printing.
Automatic duplex printing is super important to me and I'm sad that the M1212nf does not provide it.
However, I did see that it has duplex printing driver support.
I was wondering what this driver support is (I've been spending hours on the web trying to get a definition but nothing!)
and if it will work on a Mac, I saw couple threads that said that some HP printers don't offer duplex printing driver support for mac computers.
So basilally, I'm wondering how the duplex printing will work if I install the driver support.
Thanks.

Good health! I wanted to download drivers for hp laserjet m1212nf mfp. Does not work, can you help me where to download or buy the drivers, I have lost the native disk driver, now cannot install the printer! thank you! if the error my message I will forgive apologize in advance

HP LaserJet Pro M1212nf Multifunction Printer Driver Installation Continuous Loop

HP LaserJet Pro M1212nf Multifunction Printe Driver Installation Continous Loop and No Installation
Thank you

ttb58,
At what point are you hitting this loop? What operating system are you running and what are the errors you are getting?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP Officejet Pro 276dw MFP - can't connect with the printer driver (but web browser works)

Hi,
I used to own an 8500 pro which got replaced by the 276dw due to HW malfunctioning of the old model. I installed the driver (full set, win 8.1 64 bit) from the HP download area over the installed printer. I can access the printer using it's IP address. Ipad Airprint works well. The only problem is that I can't get the printer driver to connect to the printer, but the printer driver displays the printer with the correct address. Print and Scan doctor detects incomplete install and download 184MB, one bit at a time ... it will take more than an hour.
I believe - due to a message that something needs to be stopped during the install (in order to get rid of the SW for the old printer) - that this thing is stil stopped, and I need to restart that (or if it is a service I need to reset it to automatic start).
Any idea anyone?
Thanks and with best regards,
Holger

update: The Print and Scan doctor did not help, but I finally added the printer using the default windows method. So I can print, but scan to PC obviously doesn't work, and neither does the Fax printer. Help still appreciated.

Can I Scan to editable text on HP Officejet Pro 8620 using the Apple Printer Driver 3.0?

Can I Scan to editable text on HP Officejet Pro 8620 using the Apple Printer Driver 3.0?
I had a very difficult time getting my new HP Officejet Pro 8620 functioning as well as it does now. I just tried scanning something as editable text for the first time and it ended up being scanned as a pdf. At one point in my various tries there was a note on the printer screen that I did not have the HP OCR software installed.
This may be because the resolution to my installation problems with the HP Officejet Pro 8620 seems to have been reverting to operating with the HP-Apple Printer Drivers 3.0 package instead of the HP-Officejet-Pro-8620_v12.32.0.dmg installation package.
I do not, therefore, have the HP Scan application on my computer now which is where HP says its OCR software can be found.
So what I'm afraid of is that I'm now running well with the HP-Apple driver but if I do go back and install the HP Officejet Pro v12.32.0 driver software with the HP installer, in order to access the OCR softwware in HP Scan application, I'll mess up everything else.
Is there any chance that the HP-Apple Printer Drivers 3.0 package I have installed also includes OCR software? If so where can I find instructions for activating it and using it with the HP 8620's scanner?
Or can I only get OCR capability with the HP-Officejet-Pro-8620_v12.32.0.dmg package?
Any experience with this? Should I leave well enough alone? Or can I somehow install the HP-Officejet-Pro-8620_v12.32.0.dmg package without messing up my current functionality?
Thanks
Steve

The printer driver that is installed automatically from Apple doesn't scan. The scanner part can be accessed through Image Capture, but I don't think that does any OCR on the scan. You'd need a separate program. As you noted, many of the bundled software programs have OCR built-in (albeit limited). From my experience, that is only activated when you scan to "searchable" PDF or something similar. You would then have to extract the text from the PDF.
I don't have an HP printer/scanner, so take this all with a grain of salt.
If you can just install the Scanner utilities, that shouldn't affect the printer portion.
Your other option would be to purchase separate OCR software. Unless you need to scan lots of documents into text, you should further investigate installing the HP scan utilities.

Why does my Acrobat Pro 9 PDF print driver either lock up or become confused as to where it should store a file when printing a document from within the Firefox browser?

I use Adobe Acrobat Pro 9.4.5 for creating .pdf files on a Windows XP SP3 platform. Firefox 6.0.2 is my browser of choice. This question only applies to the .pdf printing process. All other printer drivers work fine with this version of Firefox.
In attempt to save paper, I choose to print most documents in an electronic .pdf format using the PDF print driver and save them to my USB drive. Before upgrading my Firefox version to 6.0.2 this process seemed to work fine but after upgrading the .pdf print process seems to be experiencing problems. This particular printing process will cause Firefox to lock up when the distiller tries to print the file to what I believe is a temporary folder under the Adobe folder. When it does this I am sometimes able to force it to complete the process but frequently it will only produce a log not a .pdf file. On other occasions the distiller will just lock up mid print without producing any kind of error message. In both cases I will frequently have to use Windows Task Manager to break out of the process which then shuts down the Firefox browser. I don't seem to have any problems when I use Internet Explorer to perform the same function. As far as I am aware I am running the most current drivers as Adobe automatically pushes down updates to me as they become available. Any ideas how I can overcome this issue or is it inherent to the new version of Firefox?

The PDF file itself does not control the "print as image" preference, which should always be turned OFF unless there's a specific need to rasterize the entire page, and is turned off by default in all Acrobat and Adobe Reader installations.
What's the filetype for the ultralight font and what export setting* are you using in ID? If you're exporting to earlier than PDF1.7, OpenType fonts will be converted and may experience some small changes in shape if their hint definitions aren't done right.
*As a side note, bear in mind that InDesign does not use any part of Acrobat when exporting PDFs, so questions specific to that stage in the process should be posted to the InDesign forums.

I cannot get my MacBook Pro to print greyscale on my Canon MG6450. I cannot access the printer driver panel on the Macbook. So I am stuck printing everything in colour and cannot specify which pages I want printed.

I cannot get my MacBook Pro to print greyscale on my Canon MG6450. I cannot access the printer driver panel on the Macbook. So I am stuck printing everything in colour and cannot specify which pages I want printed.

Try resetting the printing system:
OS X Mavericks: Reset the printing system
Next try deleting the system and reinstall the printer..
BTW this is Mac Pro desktop forum

I need to use an hp 6215 printer with my mac book pro. the driver installation disk doesn't work. where can i get a driver that will work? i use OS X

i need to use an hp 6215 printer with my mac book pro. the driver installation disk doesn't work. where can i get a driver that will work?

With the Lion it is essentially unnecessary to resort to external driver disks. What's more, most of those disks are incompatible with the OS and should not be used. The system already carries a wide variety of printer description files (aka PPDs, which is what modern printing systems use as "drivers") for a lot of brands. And there was an HP printer update just two days ago.
Just checked in mine and did indeed find that the HP OfficeJet 6200 Series, with or without Fax, is covered with the latest update.
So just go thru the motions of creating a proper printer instance:
Make sure the Mac "sees" the printer on the network.
System Preferences / Print & Scan
Click on the + button on the left column
Select the appropriate type of printer, will use IP for the rest of this
Select HP Jetdirect - Socket, default for HP network printers
Type the IP address or look it up
Name the printer for easy identification on the print dialog
Let the Mac identify the printer model or manually choose the driver
Click Add.
Once the instance pops up in the list, can click on Options & Supplies for further config.

Acrobat 7.0 Pro error message in Vista Ultimate..missing printer driver

I use to have Adobe Acrobat 7.0 Professional installed on my other computer with had XP Pro as its operating system. I could convert any Word 2003 document into a PDF and e-mail it without any problems. I just purchased a new computer with Vista Ultimate 64 bit and every time I try to convert a Word document into a PDF I get an error message that says it can't find the printer driver and to please re-install Acrobat. I did what it said and I keep getting the same error message. I even installed the newest Adobe Reader like it said. I know my printer driver works. Does anyone have a solution? It seems all the money you spend on Adobe products their support staff just wants to wash their hands and send you on some wild goose chase looking for answers on their un-user friendly site instead of answering the question or making any recommendations. If I have to update it so be it. They should have told me that. This is the last time I will fork over $600 on any of their products because their service stinks. I appreciate any help from anyone who has experienced this same problem or who knows how to rectify it. God Bless, Tony

Hi Michael, Thank you so much for the reply. You would think Adobe Support could have told me that so I really appreciate it. Do you know what I need to do to upgrade it ? Can I find an upgrade on E-Bay or do I need to go to COMP USA or some other place to buy the upgrade? Last, what exactly am I looking for to upgrade it to the newest version. (Name of product). I will also remove the other program so it won't have any other issues once I get the upgrade. Thanks again and God Bless, Tony

Printer Properties Pro vs. Printer Driver Profile

Similar Messages

Maybe you are looking for