Printer Que Stuck - Please Help!!

Hi, I have a networked printer thats been working fine every day until I did a restart.
I open the que and see it gets stuck, it says: "printing page 1, 8% complete...."
But will never go beyond that. When I open system prefs then printer and fax I see the printer there as the default, the green light is lit up next to it.
Any thoughts? I tried the basics, restart, repair persmissions, etc but no luck,
thanks!!

Have you tried turning off the printer and turning it on again? Maybe there is something in the printer’s memory that is clogging it. You should probably leave the printer off for a minute or two to make sure it resets.

Similar Messages

I have Xerox 3140 printer. Mountain Lion version can not use my printer. could you please help me. I know little English. I would like to thank those who help.

I have Xerox 3140 printer. Mountain Lion version can not use my printer. could you please help me. I know little English. I would like to thank those who help.

I have a small office. I have three devices mac mini osx 10.08. your suggestions helped me. I would like to thank. I liked your help. partially solved the problem .. I installed the drivers from the other computers on the network. When printing a document, "no pages found" error occurs. and can not print the document. please help me. I do not want to get a new printer. thank you for friendship ...

Hi,I changed my fios router and since then my c4580 printer is offline.Please help.

Hi,I changed my fios router and since then my c4580 printer is offline.Please help.
Router brand Actiontec and model # 20.10.7.5

Hi and welcome to the forums!
Here is the Verizon BIS (Blackberry Internet Service) website and procedures.
Thanks,
Bifocals
https://bis.na.blackberry.com/html?brand=vzw
http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/8067/645045/788117/1166305/1...
Message Edited by Bifocals on 01-11-2009 01:00 AM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Any Mac expert who can solve my Printing problem? PLEASE HELP!!!!

So I am asking this again... I have a Samsung 4200 SCX Series printer. It was able to print everything properly till the 14th of April when I installed the latest Security update and the thing stopped working after that (When I give a print command, it just Pauses.... Then when I resume it again, it doesn't respond, just stays there) ... I also noticed that the name of my Mac changed to XXX (3) from XXX (2) after that update, so I am thinking it's the culprit here.. I dunno if it's related, but I just thought I put it forward.
I also went to Printer and Fax settings in my System Preferences and reseted my Printer and changed the LOCATION name to the new name but no solution... I tried even installing the drivers manually, but the thing just PAUSES!!!!
And before doubting my printer, I also have Windows installed via bootcamp and the printer works fine with it, it's only the Mac creating an issue.
I got some response of people asking for the log file about it, so I am posting the last 10-20 line...
------->
E [01/May/2010:10:18:36 +0530] CUPS-Add-Modify-Printer: Unauthorized
I [01/May/2010:10:18:36 +0530] Setting SamsungSCX_4200Series device-uri to "usb://Samsung/SCX-4200%20Series?serial=8T67BAIP221002W." (was "file:/dev/null".)
I [01/May/2010:10:18:36 +0530] Setting SamsungSCX_4200Series printer-is-accepting-jobs to 1 (was 0.)
I [01/May/2010:10:18:36 +0530] Setting SamsungSCX_4200Series printer-state to 3 (was 5.)
I [01/May/2010:10:18:36 +0530] Saving printers.conf...
I [01/May/2010:10:18:36 +0530] New printer "SamsungSCX_4200Series" added by "AUTHREF".
I [01/May/2010:10:18:36 +0530] Setting SamsungSCX_4200Series printer-is-shared to 1 (was 1.)
I [01/May/2010:10:18:36 +0530] Saving printers.conf...
I [01/May/2010:10:18:36 +0530] Printer "SamsungSCX_4200Series" modified by "AUTHREF".
I [01/May/2010:10:19:09 +0530] [Job ???] Request file type is application/pdf.
I [01/May/2010:10:19:09 +0530] [Job 1] Adding start banner page "none".
I [01/May/2010:10:19:09 +0530] [Job 1] Adding end banner page "none".
I [01/May/2010:10:19:09 +0530] [Job 1] File of type application/pdf queued by "chintanvora".
I [01/May/2010:10:19:09 +0530] [Job 1] Queued on "SamsungSCX_4200Series" by "chintanvora".
I [01/May/2010:10:19:09 +0530] [Job 1] Started filter /usr/libexec/cups/filter/cgpdftoraster (PID 452)
I [01/May/2010:10:19:09 +0530] [Job 1] Started filter /usr/libexec/cups/filter/rastertoqpdl (PID 453)
I [01/May/2010:10:19:09 +0530] [Job 1] Started backend /usr/libexec/cups/backend/usb (PID 454)
E [01/May/2010:10:19:09 +0530] PID 454 (/usr/libexec/cups/backend/usb) crashed on signal 10!
I [01/May/2010:10:19:09 +0530] Hint: Try setting the LogLevel to "debug" to find out more.
I [01/May/2010:10:19:10 +0530] [Job 1] Backend returned status -10 (crashed)
I [01/May/2010:10:19:10 +0530] Saving printers.conf...
*E [01/May/2010:10:21:41 +0530] Resume-Printer: Unauthorized*
I [01/May/2010:10:21:41 +0530] Saving printers.conf...
I [01/May/2010:10:21:41 +0530] Printer "SamsungSCX_4200Series" started by "chintanvora".
Oh and it's connected via USB, not the network...
It still baffles me cause I have searched and the only people getting this issue are the one's who use a printer via bonjour or online.. I AM USING A FREAKING USB AND IT's NOT PRINTING!!!!
PLEASE HELP if you can... I can't replace my printer or re-install the OS just for this crap...
MacBook Air running on Mac OS X 10.5.8

Hey Rodney, the name changed after I installed the latest security patch... And it's not only me, it's a common problem.. Here check it out...
http://discussions.apple.com/thread.jspa?threadID=2319594&tstart=0
I wish I never installed that security update...
And what exactly does this deleting System pref files does??? What does setting up network again imply... You mean just adding the password and selecting the net name of my wifi don't you?? Cause I would hate to reset all those MAC address and other stuff (I really don't have much knowledge about those so wouldn't like to tamper with those).
Anyways, thanks.

Time Machine backup gets stuck - Please help

Hi all,
I'm backing up my MBP via ethernet to a Time Capsule. The incremental backups take forever and are driving me nuts. The backups seem to be getting stuck midway. The disk sounds like it's spinning but the progress bar doesn't move. Also, it seems to be copying over too many files every hour, like >60000 or so (log below). I doubt that so many files get modified every hour.
I've tried everything (I could think of and find on the discussion boards) like deleting the sparsebundle, deleting the entire backup drive, playing with the backup frequency, nothing works.
Please help!!
Thanks,
DB
11/27/08 10:02:57 PM /System/Library/CoreServices/backupd[7045] Starting standard backup
11/27/08 10:02:57 PM /System/Library/CoreServices/backupd[7045] Network mountpoint /Volumes/TC Backup Disk not owned by backupd... remounting
11/27/08 10:02:57 PM /System/Library/CoreServices/backupd[7045] Network volume mounted at: /Volumes/TC Backup Disk-1
11/27/08 10:03:07 PM /System/Library/CoreServices/backupd[7045] Disk image /Volumes/TC Backup Disk-1/Dhiren's MBP_002332d43774.sparsebundle mounted at: /Volumes/Backup of Dhiren's MBP
11/27/08 10:03:07 PM /System/Library/CoreServices/backupd[7045] Backing up to: /Volumes/Backup of Dhiren's MBP/Backups.backupdb
11/27/08 10:04:39 PM /System/Library/CoreServices/backupd[7045] No pre-backup thinning needed: 570.5 MB requested (including padding), 426.79 GB available
11/27/08 10:14:44 PM /System/Library/CoreServices/backupd[7045] *_Copied 87124 files_* (20.3 MB) from volume Macintosh HD.
11/27/08 10:14:48 PM /System/Library/CoreServices/backupd[7045] No pre-backup thinning needed: 559.1 MB requested (including padding), 426.69 GB available
11/27/08 10:15:02 PM /System/Library/CoreServices/backupd[7045] Unable to rebuild path cache for source item. Partial source path:
11/27/08 10:15:02 PM /System/Library/CoreServices/backupd[7045] Error: (-39) SrcErr:YES Copying (null) to (null)
11/27/08 10:15:14 PM /System/Library/CoreServices/backupd[7045] Copied 1067 files (10.6 MB) from volume Macintosh HD.
11/27/08 10:15:22 PM /System/Library/CoreServices/backupd[7045] Starting post-backup thinning
11/27/08 10:15:22 PM /System/Library/CoreServices/backupd[7045] No post-back up thinning needed: no expired backups exist
11/27/08 10:15:22 PM /System/Library/CoreServices/backupd[7045] Backup completed successfully.
11/27/08 10:15:26 PM /System/Library/CoreServices/backupd[7045] Ejected Time Machine disk image.
11/27/08 10:15:32 PM /System/Library/CoreServices/backupd[7045] Ejected Time Machine network volume.
11/27/08 10:15:32 PM /System/Library/CoreServices/backupd[7045] Ejected Time Machine network volume.
Message was edited by: dhiren9

The indication that the backup completed successfully is the best evidence that it did. If you want something more explicit, you can proceed as below.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo tmutil compare
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
Files that you’ve excluded from backup, or that are excluded automatically, are ignored.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

Reg: Printer Drivers Installations please Help me Urgent

Dear All,
I need to know how to install printer plugin in Moutain lion version The thing which i have moutain lion OSX in my iMac i have a printer its offical. But i cant able to give a print in iMac osx then i have asked to my supported printer person about it then they provided me a plugin the details below.
File Format { Terminal Install }
File EF551699.plugin ( format .plugin )
Please advise me how to install that plugin and how to get connected please help me
Even i am attaching here screenshot of the same.
Please waiting

That package is corrupt, you need to get another copy of the installation or from a different webpage / source
Good Luck

Library disappeared - I'm stuck - please help

We just moved so I unplugged my computer. I backed up files onto a portable hard drive.
After hooking up my computer at my new place, my itunes library is blank. I see 2 choices, but I'm afraid to press any buttons and wipe out the songs which are stored on my ipod.
1) Automatically sync songs to my ipod. It says it syncs ipod to mirror music library (which is blank) so I don't think I want that one.
2) Follow the new computer instructions - Drag itunes folder to itunes window?? Where is the itunes window? I've copied the files a few times (from external hard drive into itunes as well as file stored under my documents/my music (where I can see the songs I've purchased.)
I'm just stuck and worried I'll lose all the songs I've paid for. Can someone please help me?
Thanks!
Dianne

*After hooking up my computer at my new place, my itunes library is blank*
In addition to your back-up, are all your songs still in the usual folder(s) on your computer? Try holding down the Shift key in Windows when opening iTunes. In the resulting dialogue you will get the option to create a new library or navigate to an existing one. The default location for your iTunes library is in C:\Documents and Settings\Username\My Documents\My Music\iTunes\ (or C:\Username\Music\iTunes\ in Vista). Look in there and see if you have more than one library file (they have the extension .itl) If you have more than one try opening them in turn, you may find your original library is still intact: How to open an alternate iTunes Library file
*but I'm afraid to press any buttons and wipe out the songs which are stored on my ipod.*
If your iPod is set to update automatically you need to take care connecting to an empty iTunes. You can use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows with iTunes 7.3 or later installed hold down the Shift + Ctrl keys together. This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer: iTunes - Keyboard Shortcuts for Windows
When your iPod appears in the iTunes source list change the update setting to manual, that way you can continue to use your iPod without the risk of accidentally erasing it. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod and iPhone
Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. There are a number of third party utilities that you can use to retrieve music files and playlists from your iPod. I use Senuti but have a look at the web pages and documentation for the others too, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. This is just a small selection of what's available, you can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
Senuti Mac Only (Currently only the beta version is iPod Touch & iPhone compatible)
PodView Mac Only
PodWorks Mac Only
iPodDisk PPC Mac Only (experimental version available for Intel Macs)
TuneAid Mac only (iPhone and iPod Touch compatible)
iPodRip Mac & Windows
YamiPod Mac & Windows
Music Rescue Mac & Windows
iPod Music Liberator Mac & Windows
iGadget Mac & Windows (iPhone and iPod Touch compatible)
Floola Mac & Windows
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
If you have any iTunes Music Store purchases the transfer of purchased content only from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
Keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.

Tried to install the latest update on my ipad. i get an image of "itunes" with a connecting cord. hasnt changed in three hours. if i turn it off, it goes right back to same image on black background. i am stuck, please help me, thanks

i tried to install the latest update on my ipad. i get an image which says I tunes with a cord to plug in. it is on a black background.. it has been like this for three hours now. if i turn it off and then on again that is the only page that appears. i am stuck. please can anyone help me? thanks.

It's too bad you lost stuff. I would recommend that you back stuff up before the next one. For example, iOS8 will be out sometime this fall. Just in case you experience the same thing again, do a backup before you do the update.

Report Printing Issue ,. Please help

I have report query and when testing the report I get the following error. Can someone please help with necessary steps.
ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.
Thanks
George

All,
I think there are now a number of issues discussed in this thread, so here are a few clarifications:
- If you use BI Publisher as the print server, then you can access BI Publisher through a URL, this URL along with the configured port was supplied during the install. It is also listed in the documentation. It's typically something like this:
http://yourhost.domain:port/xmlpserver
- If you use another print server (Apache FOP, Cocoon, etc), then it depends on that server whether or not there's a browser accessible configuration utility, e.g when using Apache FOP along with Oracle OC4J, then the URL would be something like this:
http://yourhost.domain:port/em
This takes you to the "Enterprise Manager" for OC4J from where you can deploy the war file and also review the log files to diagnose potential issues.
- Regarding the RTF vs XSL-FO question, for new users I would recommend using report regions along with the burned in generic, configurable report layouts first, and see how far that gets you and only if you need further customization I would recommend using XSL-FO templates. And when doing so, start with the generic XSL-FO templates, because they are being pre-populated, so you won't have to start from scratch but can modify existing templates.
Regards,
Marc

How do I connect my ipad2 to a lexmark wireless printer?? Please help

I need some help syncing my iPad2 to a lexmark wireless printer. Can someone please help out on what I can do to sync them together?

You will need to install the LexPrint Application on your iPad2 so you can print to your Lexmark printer. Please check this article for more info: Introducing the LexPrint Mobile Print Application. You can also download the LexPrint application by visiting the Lexmark website.

Canon Pro-100 13x19" Prints - Images suddently printing misaligned/slanted - Please help!

Hi, I purchased a Canon Pro-100 printer about two weeks ago and I have been printing lots of 13x19 prints on Canon brand semi-gloss paper. I have successfully printed about 60 prints, but suddenly I have an issue. The images are printing misaligned/slanted on the paper, so that there is a sliver of blank paper on the bottom right and bottom left. Here is a picture of what is happening to the prints:
http://i923.photobucket.com/albums/ad79/milligangames/101_22941_zpsf995dcd2.jpg
I have tried cleaning the bottom plate, cleaning the roller, aligning the print head both manually and automatically, but nothing is helping. When I print on 8.5x11 or 4x6 paper I do not seem to encounter this issue. Does this mean the paper is feeding unevenly for some reason? Please help!

Hi pmilligan,
It is recommended that you contact live technical support . There is NO charge for this call. Real time feedback of a live technical support call would be very beneficial in this case.
Please dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays). A Canon technical support representative will be able to resolve this issue faster.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Snow Leopard causing Printer & Excel crashes PLEASE HELP!

Original install from 10.5.8 to 10.6.0 - now at 10.6.1.
The first install the system was freezing up and I couldn't get the printer to work. Internet was intermittent and slow as was the whole system and couldn't get Quicktime to work. Then the system hung up at the log in screen and went into a loop back to the log in screen effectively making the Mac Pro inoperable.
I wiped the computer and re-loaded Snow Leopard and used a Time Machine back-up to get everything back. Everything I opened worked fine (including the printer). I had to re-install Office:mac 2008 and then the problems started.
1.The printer would crash on anything I tried to print on any app, and the System Preference panel for printers would crash every time I tried to open it. I tried downloading the fix for HP Photosmart 3180 C All-In-One printer and got to a certain point and a warning resulted:
"/system/library/extensions/pulsedriver.kext was installed improperly and cannot be used. Get update from HP" ????
2. Excel will open about 5 workbooks with no data and the beach ball spins until it crashes.
A complete wipe and re-install of Office did not fix it.
I also fixed the permissions on my HD and repaired the disk and this did not help.
Is there anything I can do to fix these two areas without wiping the HD and starting from scratch?
The printer started to crash AFTER I installed Office:mac 2008. but wiping the program off the HD did not fix the printer.
Please Help !!!

I finished validating the fonts and used YUSA to clean up the caches but to no avail. I will look at an uninstall for the print driver and see what that does. My problem is that I can't even get into the print preferences because it fails to open.
Though I agree with you on Office being a very stable program. I am not able to get Excel to open up... It starts up and opens the last 5 spreadsheets that were previously opened before the problem started. The sheet shell is there for all 5 workbooks but there is no data and nothing but a beach ball bouncing around. Summer is over and I am sick of playing with the beach ball LOL
By the way - what All in one printer would you recommend for Mac. The HP printers I have are from my days when I used a (yuk) PC.
Also, I have two other Macs - a 15 Macbook Pro and a recently purchased 17 Macbook Pro - I have not installed Snow Leopard on either one and probably will not based on all the issues I am having with my tower. they run great right now and no problems with Office or the HP printers.

Installed the OS X Yosemite my computer froze up daily, trying to reinstall then I got really stucked, please help

My computer kept freeze up daily with OS X Yosemite installed a while ago, and I followed the other instruction to do "OS X" Recovery to: (1) erased my start up disk (2) Reinstalling Mac OS X Yosemite.
While about 18 or 20 minutes remaining from the installation, it went back to 2 hours 57 minutes but stuck there. I let my computer run over night but it was still at 2 hours 57 minutes. so I cancelled the installation which seemed to be the only choice.
I tried again today, erased my start up disk and reinstalled again, same situation happened again, when the remaining time said around 20 minutes, it went back to 2 hours 56 minutes and stuck there. I cancelled it again.
I read some other instructions in this community and did a hard shutdown and restarted while hold down the command key + R key. it took me to the disk manager screen and the only choice I had was the OS X Lion version.
I tried to install the OS X Lion, it said that will take 3 hours or so, after 20 minutes, a screen came up and said I need to turn off the computer by press the power button down then turn the computer on again. And I did. When I turn on the computer again, with Comand + R key pressed, I had to wait for an
internet recovery before I went back to the disk manager and trying to reinstall the OS X system. It kept coming back to ask me to turn the power off…
what can I do? Please help,
MacBook Air

Boot back into the Recovery Partition. Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Then re-install the OS.
X Yosemite Installation Stuck with Minutes Remaining?

Really need help in printing JTextArea. Please help me

Hi,
i want to print the content of JTextarea which span more than 1 page.i have tried all suggestion in the forums but still have the same result.
it only print the first page.
Please help me.
attached is the code for printing:
public class PrintUtilities implements Printable {
private Component componentToBePrinted;
public static void printComponent(Component c) {
new PrintUtilities(c).print();
public PrintUtilities(Component componentToBePrinted) {
this.componentToBePrinted = componentToBePrinted;
public void print() {
PrinterJob printJob = PrinterJob.getPrinterJob();
printJob.setPrintable(this);
if (printJob.printDialog())
try {
printJob.print();
} catch(PrinterException pe) {
System.out.println("Error printing: " + pe);
public int print(Graphics g, PageFormat pageFormat, int pageIndex) {
/* get component width and table height */
Dimension dimension = componentToBePrinted.getSize();
double compWidth      = dimension.width;
double compHeight     = dimension.height;
/* get page width and page height */
double pageWidth      = pageFormat.getImageableWidth();
double pageHeight      = pageFormat.getImageableHeight();
double scale = pageWidth / compWidth;
/* calculate the no. of pages to print */
final int totalNumPages= (int) Math.ceil( ( scale * compHeight ) / pageHeight );
if (pageIndex > totalNumPages) {
return(NO_SUCH_PAGE);
} else {
Graphics2D g2d = (Graphics2D)g;
g2d.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
g2.translate( 0f, 0f );
g2.translate( 0f, -pageIndex * pageHeight );
g2.scale( scale, scale );
disableDoubleBuffering(componentToBePrinted);
componentToBePrinted.paint(g2d);
enableDoubleBuffering(componentToBePrinted);
return(PAGE_EXISTS);
/** The speed and quality of printing suffers dramatically if
* any of the containers have double buffering turned on.
* So this turns if off globally.
* @see enableDoubleBuffering
public static void disableDoubleBuffering(Component c) {
RepaintManager currentManager = RepaintManager.currentManager(c);
currentManager.setDoubleBufferingEnabled(false);
/** Re-enables double buffering globally. */
public static void enableDoubleBuffering(Component c) {
RepaintManager currentManager = RepaintManager.currentManager(c);
currentManager.setDoubleBufferingEnabled(true);
THANKS

Use freely downloadable smart jprint class AtDocumentPrinter from http://www.activetree.com. This package alos allows you to print contents of any kind of JTextComponent such as JTextField, JTextArea, JEditorPane, and JTextPane.
It breaks the text, images and forms into multiple pages by breaking horizontally and vertically. JTable printing is specially interesting.

Printing in AIR, please help

Hi guys, is it possible to make a software where you can customize a page, and then prints whatever is in the page (like converting a canvas content to bytearray) and then show's the print preview?
Uhm, I already know how to convert the canvas content to bytearray. Just wanted to know if print preview and print is in AIR? Please help, thanks

Printing in AIR isn't great, but it's better with AIR 2.
http://blogs.adobe.com/koestler/2010/05/printing_in_air_2.html
http://dryicons.com/blog/2008/04/26/multiple-page-printing-from-a-html-adobe-air-applicati on/
http://vfoo.wordpress.com/2009/03/24/adobe-air-print-css-and-html-printing-hack/
http://anirudhs.chaosnet.org/blog/2008.02.15.html

Printer Que Stuck - Please Help!!

Similar Messages

Maybe you are looking for