Printer Redirection and device settings

I have a HP CP5225dn printer that I am redirecting in Windows Server 2008 and device settings are not populating correctly. I have defined tray 2 as 11x17on the print server and it shows as letter in the redirected printer. I have used both PCL5 and PCL6
drivers on the client/server with no success. The only way that I can get it to recognize the 11x17 tray is to use the Easy Print driver. However, with this driver it prints extremely slow. I don't have an option to try 2008R2 to test if this would speed up
the print process since Microsoft made significant changes to the Easy Print Driver. I have also verified that the laserjet 2000 series printers have the same issue with the redirected printer. Any thoughts?

Hi,
Thank you for posting in Windows Server Forum.
Does the client have latest RDC version installed and either .Net Framework 3.0 SP1 or .NET 3.5 SP1?
Did you find any specific error in application or event log?
First of all for slowness issue with Easy printing, you can apply this Hotfix and check the result.
FIX: After you apply hotfix 954744, printing performance may be significantly slower when you print documents by using Terminal Services Easy Print
For more information refer beneath article.
TS: Terminal Server Printing / Easy Print
http://blogs.technet.com/b/askperf/archive/2009/05/14/ts-terminal-server-printing-easyprint.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

Transport.of SAP script form , printer def and device type is not enaugh

I transported the SAP script form , printer definition and device types of a thermal printer.
On original system the printout is ok but on target system not. What should I do?

Thank you for your fast answer
As the matther of fact I am technical person. I think Output type belongs to application. However the difference is visible in se71 ->Utilities->Printing test -> output device ->print preview.
As I wrote I transpored corresponding. SAP script form , printer def and device type

Terminal-printer redirection is not working

Hello, I need your help - the situation is: we have an old PC (with Windows XP installed) and need to connect to terminal server (based on Windows Server 2008 R2). Also this old pc have a local printer (USB connected) and we need to print documents from
terminal to this local printer. Unfortunately, this local printer is unavailable from terminal session and I don't know why. We already checked all the necessary options, printer redirection is on at this moment. But there is no effect. How can we solve this
problem? Thank you.

Hi,
Thank you for posting in Windows Server Forum.
Here for your case I would suggest you try enabling Remote Desktop Easy Print Service and verify. But there are points for running this service.
(1) RDC 6.1 or above (Windows XP with Service Pack 3 and above includes this) {Suggest to have RDP 7 for Windows XP}
(2) Even if RDC 6.1 or above is used, the user must install a supported version of .NET Framework separately. Microsoft .NET Framework 3.5 (which includes .NET Framework 3.0 SP1) can be downloaded from the Microsoft Download Center (http://go.microsoft.com/fwlink/?LinkId=109422
*In Windows Vista SP2 with RDC 7.0 and KB971644 installed, .NET Framework is not required
(3) Terminal Services role.
(4) Remote Desktop Session Host Role.
In addition need to see the group policy setting under below path.
Computer Configuration -> Administrative templates -Windows Components -> Remote Desktop Services > Remote Desktop Session Host -> Printer Redirection
Use Remote Desktop Easy Print printer driver first: “Enabled” for Easy Print redirection, and it has to be “Disabled” for Legacy Print. For “Not configured”, Easy Print is chosen by default.
You can find more information and configuration details over below.
Using Remote Desktop Easy Print in Windows 7 and Windows Server 2008 R2
http://blogs.msdn.com/b/rds/archive/2009/09/28/using-remote-desktop-easy-print-in-windows-7-and-windows-server-2008-r2.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I use IMAC upstairs connected to the house wifi downstairs where the networked printer is. I have 'found' the network printer on my IMAC settings but when i send to print I am getting a pop-up box which has 'apple' as user name and is asking for password.

I use IMAC upstairs connected to the house wifi downstairs where the networked printer is. I have 'found' the network printer on my IMAC settings but when i send to print I am getting a pop-up box which has 'apple' as user name and is asking for password. I have tried my own IMAC password but to no avail. The printer also shows a pop-up box stating 'awaiting authentication.
Any help appreciated

You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
An Extreme's Guest network is separate from its Main network; that is the reason for having it.

How can I get the apple configurator to retain a devices settings and apps?

Hi there all!
I have an iPhone that already has apps and email settings on it. I want to use the configurator to stop the device being paired with anything else not allow it to connect to any other Macs. I've connected it, backed it up, enabled supervision, then deployed the profile. Through out all of this I never get the option to restore device settings and when I click on edit stored backups, it contains nothing. With supervsion disabled I can restore the backup but, snag is to disallow pairing it needs to be supervised.
Also, am I right in thinking that once it's supervised I can't install any apps directly from the device ?
Sorry if these are really noddy questions :-) I just want to stop the device from being able to connect to or pair with anything other than my mac.
Thanks
Will

Jpegs can't have transparent areas. Most likely you had layers and were forced to save "as a copy", which means that the image which remains open in PSE is not the jpg. A file saved as a copy makes a copy in the save format, but it's not like save as where you now see the newly saved version instead of the original. The original remains open and unsaved onscreen.

My ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

my ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I reset my network settings, and when I went to join my wifi network i typed in the correct password, but it will not let me join. Other iphones and devices can however....

I reset my network settings, and when I went to join my wifi network i typed in the correct password, but it will not let me join. Other iphones and devices can however....

Try rebooting the router

When I open certain apps it says my device's date is incorrect. But on my calendar and general settings, it's all correct!

When I open certain apps it says my device's date is incorrect. But on my calendar and general settings, it's all correct!

Try changing the date - doesn't matter to what - just change it - go back to the app and I assume that you will get the same message. Go back to the settings and change the date and time to automatic again and see if the apps will work after that. Turn location services on in the settings as well.

HT201274 i tried to erase all content and reset settings from the device option.it is taking too long and its been 15 hours but not yet done.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.

i tried to erase all content and reset settings from the device option.it is taking too long and its been 15 hours but not yet done.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.

nabidhadi wrote:
.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.
You iPod has been jail broken. Unfortunately you are on your own here. I can offer that you need to find out which method and software was used to JB.
Good luck...you're gonna need it....

I made some amendments to my colour settings in PS CS5 and now everything prints black and white. Please help me to reset all the settings to default

I made some amendments to my colour settings in PS CS5 and now everything prints black and white. Please help me to reset all the settings to default. This was after I tried to implement the steps set out in Real World Photoshop CS5. I stuggele to match the colours of my two screens, the one a laptop and the other a LCD and the printer, even after calibration with Spyder 3. Really lost at present.

Tap Settings / Wi-Fi. Tap the blue circle with an arrow to the right of your network then tap: Forget This Network.
Restart the iPad. Tap Settings / Wi-Fi. Tap the network name again then type in your password.
If that didn't help, try here > Apple - Support - iPad - Wi-Fi Assistant
And try turning off your router for 5 minutes, then turn it back on. Try typing in the password again.

May i know the right photoshop cs6 color settings to print black and white?

hi
in photoshop cs6 64bit under windows 7 sp1 64bit i got
gray Dot gain 15%
spot Dot gain 15%
i did a clean install of photoshop cs6 , i guess they are the dafault
may i know if they are the right settings ? i print with my printer and in a lab with an epson printer
thanks

Ask the lab but I'd be shocked if they asked you for a grayscale document, assuming this Epson is for output of photographic images
they work with psd files and jpg
(but the when i save a photo edited with for example an adjustament layer(black&white) photoshop convert it in a grayscale image ,isn't it?
but photoshop should warns about mismatch profile ,should it? or does it work only with color space
Dot gain would account for whatever dot gain you're aiming for on the press, so you'd have to ask.
Gamma would be used for output to an emissive display, so something like 2.2 to mimic sRGB behavior might be one option
. but may i ask a question?
because i guess i'm confused now
Gray and Spot settings are related only to convert from rgb to mode grayscale
or these settings influence what i see in the monitor when for example i add a black and white adjustament layer?
by the way gray and spot set both at dot gain 20% , are the dafault?
thanks

Camera and mic device settings

Hi,
For some users the default camera and mic devices might not be the desired devices.
I know you can get the flash settings popup with a right click but it's small and users don't understand what to do there.
How does LCCS handle this situation?
Is there a component for webcam and mic settings that let the user choose from a list of available devices and test them?
Flash only scan the devices once if it finds at least one device but sometimes this device might be a virtual camera like google plugin
or a broken device like the built-in camera in a laptop. If a user connect a new camera after flash made the scan, this camera won't be available.
How do you handle that?
Thanks

Just thinking this through in my head ... you could have a custom view in your app that tests that camera / audio is working before starting to publish to everyone.
1) Start app
2) Display a custom view to just the one user:
SDK API docs for WebcamPublisher:
<session:ConnectSessionContainer
     roomURL="http://connect.acrobat.com/exampleAccount/exampleRoom"
     authenticator="{auth}">
     <mx:VBox width="100%" height="100%">
        <collaboration:WebcamPublisher id="camPub"/>
        <collaboration:WebcamSubscriber webcamPublisher="{camPub}"/>
         <mx:Button label="Video" toggle="true" id="camButt"
       click="(camButt.selected) ? camPub.publish() : camPub.stop()"/>
     </mx:VBox>
   </session:ConnectSessionContainer>
3) http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/Camera.html #names > Flex API Camera "names" property can get you all the names available
and maybe iterate on the available cameras and set the "cameraNameIndex" on WebcamPublisher
Alex G.

IPhoto Printing and Default Settings

Help would be appreciated. All of sudden, with no other changes to my computer or my printer, when I try to print a photo to 4x6, 5x7, etc sized photo paper, the print is oriented to portrait, rather than to landscape. Can't find any settings to change the orientation. I've reset my printer to default factory settings. I've noticed that all of the print pre-sets in my computer are set to portrait, and I can't find a way to change the pre-sets. Very frustrating as I print quite a few pictures this way and have never had a problem. The only way I could print a 4x6 and get the whole picture is to print it on 8x10 paper. Thank you for any suggestions. Using MacBook Pro (2011), HP Officejet 8500 all-in-one, and iPhoto 9.5.1.

That indicates that the problem is limited to your account on the Mac. Since deleting the iPhoto preference file didn't help it could be another pref file that's messing up the process. Here's a way to determine if that's the case:
Trouble Shooting Preferences
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
1 - close all applications.
2 - open your Home/Library folder and Option-drag (copy) the Preferences folder to the Desktop.
3 - select the contents of your Home/Library/Preferences folder and drag them into the Trash bin in the Dock. You will be asked to provide your Admin password.
4 - reboot. Be sure to know your account's username and password as you will be asked to log in with it.
5 - run the application again and determine if the problem(s) is fixed.
6 - If the problem is fixed:
A - open the working Home/Library/Preferences folder.
B - Open the Preferences folder on the Desktop, select all of the contents and drag them into the working Home/Library/Preferences folder.
C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace or Skip button.
D - reboot.
7 - If the problem is NOT fixed, drag the contents of the Preference folder on the Desktop into the Home/Library/Preference folder and replace the entire contents that were created by clicking on Replace.
8 - reboot and you're back as square one.
Note: keep the Preference folder on the desktop until you're sure all registration info for your apps are working. If not you can copy the required files from the desktop pref folder to the working one.

TS1702 adjusting the security and permissions settings for your device.

I Updated to the ios6, then tried to save a video to the camera roll. The app asked if I would allow it to have access to my photos, and I said "no" and now I can't save any videos made with that app to my camera roll. I contacted the support at vidrythum and they said I had to contact apple and ask how to adjust the security and permissions settings for your device. Any ideas??
thanks

WOOHOO!!
You are a diamond!!
All working now. Thanks mate.

I have installed my brother computer and is in my printers and devices but is not coming up as a printer option in adobe pdf Help I was able to print PDFS before installing adobe now I cant

I have installed my brother computer and is in my printers and devices but is not coming up as a printer option in adobe pdf Help I was able to print PDFS before installing adobe now I cant

Be sure Safari does not have the Block Pop-Up Windows preference set.
Where I work now there are several unencrypted VLANs that require authentication, and Safari promptly pops up a window for me to register every time.

Printer Redirection and device settings

Similar Messages

Maybe you are looking for