Printer redirection Slow performance

We have a Remote Desktop Server 2008R2.
When a user logs in (trough TS Gateway) with Printer redirection enabled (Using Easy Print method) the performance is very bad.
It's not printing that is slow, it's the performance of the RDP Session/server
For our test we disabled AntiVirus on the server.
Fox example: A user logs in with Local Printers, opening a small Doc file takes about 10 seconds. If the user logs of and logs in without local printers the doc file opens within a second.
Also generally everything is much faster without printer redirection.
The server is fully updated and we are using the most recent RDP Client.
The server is connected to an internet connection with 50/5 Mb Down/Up speed.

Hi,
I did a couple of tests:
- Step1: Removed all local printers, logged on with printer redirection enabled on the RDP client. Result: No performance problems with opening DOC files.
- Step2: Added printer 1, logged on. Result: Slow performance with opening DOC files.
- Step3: Removed printer 1, added printer2, logged on. Result: Slow performance with opening DOC files.
- Step4: Repeated Step3 with all printers. Result: Slow performance with opening DOC files.
So it doesn't matter which printer we add, it always results in slow performance. The printers are all from different brands. I happens with all user accounts, also with users that are Domain Admins.
OS:
RDS Server: Windows Server 2008 R2 Standard SP1
Client: Windows Server 2008 R2 Standard SP1
We monitored the CPU and Memory usage while starting Word, the cpu's doesn't use more then 4% utilization and the memory usage is low.
The Remote Desktop Services server has Office 2003 installed with SP3. We cannot upgrade Office to 2007/2010 because it's incompatible with our database.
Can it be that Word 2003 is loading the redirected printers while opening a document what is causing the slow performance?
Kind regards,
Bas

Similar Messages

Mac OS 10.6 Print Server slow performance to Xerox Phaser 3600

Hi,
I have a client who has numberous printers captured on a Mac OS X 10.6 Server with print services running which works fine with every printer except for a Xerox Phaser 3600 (small A4 mono postscript printer) in that print jobs sent to it via the print server take upto 5 minutes to printer. If the client computers print direct then it is fine and very speedy.
Below is some more detail and any help or suggestions with this would be greatly appreciates.
• Printer server is a MacMini running Mac OS X Server 10.6.8 v1.1
• Xerox 3600 printer is a small A4 mono postscript printer.
• Printing direct to printer is instant, via the print server can take up to 5 minutes.
• The print server has various other printers setup and they are not experiencing the same performance problem.
• The print server is using the LPD protocol but they have tried the IPP protocol and again it is slow.
• When they send a job to print it remains in the users local print monitor and the servers print monitor for up to 5 minutes.
• The Xerox printer is running the latest firmware update.
• The print server is using a Xerox downloaded driver as opposed to one of Apple OS shipped drivers.
• Checked Xerox compatibility list and this printer is fully supported in 32bit and 64bit applications.
• Restarted printer.
• Test jobs have been small TextEdit plain text tests.
Thanks in advance
Anton

Try this:
https://discussions.apple.com/message/15518965#15518965

Slow Performance, Windows with My Documents Redirection, path temp

I've been annoyed by the SLOW performace on Itunes for Windows ever since i purchased my iPhone, i think i know one reason for my slow performance now.
My Windowx-box is member of a domain (connected to a Windows Small Business server) and for security we use folder-redirection on "My Documents" folder (i.e instead of "C:\%username%\my documents\" we use \\server\%username%\my documents) this is a quite common setup on any businesscomputer using windows.
Itunes on windows defaults to storing its cache and library in My Documents and in my case its on \\server\ , this hurts performance tremendously since im on a wireless 54g connection.
I'd like to be able to configure where I want the library stored AND wich HD to put temp-files/cache on...
If this is something that takes ages to fix I welcome any reghacks or directions or wich file to hex-edit to make a workaround.

Copy the iTunes folder on the server to you local hard drive.
Hold Shift and launch iTunes.
Select *Choose library*.
Select the *iTunes library.itl* file in the iTunes folder on your local drive.

Remote Desktop Services Printer Redirection with easy print not working as Desired

Hi,
I have a Terminal Server Farm with a number of Windows Server 2008 R2 Remote Desktop Session Host Servers in the Environment. There is also a RD Gateway server which is used to connect to the RD Session host servers in the environment. We
had configure the policy "Use Terminal Services easy Print Driver First" for all the RD Session Host servers. Everything was working well untill a couple of users Complaint about slow printing on Easy Print. While trying to troubleshoot the issue we came
to know that when we by-pass the RD Gatewat and make a Direct connection to the RD Session Host Servers we are able to Print Really fast using Easy Print. Only When we use the RD gateway server we get the problem with the Printing.
As we could not get through this problem and we are not in a condition to by-pass RD Gateway for connections we decided to put the TS Easy print Driver as a Second option. We went ahead and identified the 3 printers for which printing was slow. we
Installed the Drivers for the same printers on all the Terminal Server and Disabled the policy "Use Termianl Server Easy print Driver First". After this we were able to print fast on the 3 printers having Slow printing issues. All the other Printers were using
Easy print.
After a day we realised that there were more than 20 drivers for Different printers installed in the Print Server Properties. We started getting viered problems with the Printing on all the Terminal servers like, Print Spooler Service Crashing, Hanging,
Users not able to redirect printers at all. To avoid this we Removed the Driver Packages but they came back the very next day.
I am not sure what could be causing this kind of behavior. I would really appriciate if someone can help he with these two problems
1) Easy print Working Slow only when using RD Gateway Server
2) Printer Drivers Getting installed on Terminal Servers when Easy Print Policy is disabled.

1) Easy print Working Slow only when using RD Gateway Server
> Difficult to track down especially through forum. Looking for some known issues/hotfixes
954743 FIX: After you apply hotfix 954744, printing performance may be significantly slower when you print documents by using Terminal Services Easy Print
http://support.microsoft.com/?id=954743
The Remote Desktop Easy Print (RD Easy Print or TS Easy Print) uses the XPS print driver that ships with .NET Framework.
2) Printer Drivers Getting installed on Terminal Servers when Easy Print Policy is disabled.
> If Easy print is not the first driver then it installs the driver if they are InBox drivers
> If these are non-inbox drivers - This is because administrators are RDPing to the server from another PC with several printer/drivers installed.
When they RDP with printer redirection enabled, the drivers get automatically installed.
To avoid this, either turn off printer redirection at server level from RDP-TCP properties - might not be feasible if users need redirected printers
Else make sure that when admins RDP, printer redirection is turned off so that drivers are not automatically installed
This was a major issue in 2k3, i havent tested it in 2k8 though
This behavior is related to the change you made in Easy print driver behavior
Sumesh P - Microsoft Online Community Support

Printer Redirection and device settings

I have a HP CP5225dn printer that I am redirecting in Windows Server 2008 and device settings are not populating correctly. I have defined tray 2 as 11x17on the print server and it shows as letter in the redirected printer. I have used both PCL5 and PCL6
drivers on the client/server with no success. The only way that I can get it to recognize the 11x17 tray is to use the Easy Print driver. However, with this driver it prints extremely slow. I don't have an option to try 2008R2 to test if this would speed up
the print process since Microsoft made significant changes to the Easy Print Driver. I have also verified that the laserjet 2000 series printers have the same issue with the redirected printer. Any thoughts?

Hi,
Thank you for posting in Windows Server Forum.
Does the client have latest RDC version installed and either .Net Framework 3.0 SP1 or .NET 3.5 SP1?
Did you find any specific error in application or event log?
First of all for slowness issue with Easy printing, you can apply this Hotfix and check the result.
FIX: After you apply hotfix 954744, printing performance may be significantly slower when you print documents by using Terminal Services Easy Print
For more information refer beneath article.
TS: Terminal Server Printing / Easy Print
http://blogs.technet.com/b/askperf/archive/2009/05/14/ts-terminal-server-printing-easyprint.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Slow performance of PreparedStatement

I am having difficulty with extremely slow performance or a relatively simply Microsoft SQL Server 2000 call from my Java applet. Most of the application runs fine, but there are certain parts that are repeatedly giving me a long delay before completing their execution. The code is as follows:
// Create the try block for the execution of the SQL code
        try{
            // Create the command to be executed
            String command = new String( "select Description, Enabled " );
            command += "from tLineInfo where( Line = ? )";
            // Create the SQL text to be executed
            PreparedStatement get = _connection.prepareStatement( command );
            get.setInt( 1, lineNo );
            // Execute the SQL command
            ResultSet lineInfo = get.executeQuery();
            // Display the information accordingly
            if( lineInfo.next() ){
                // Populate the user data fields
                description.setText( lineInfo.getString( "Description" ) );
                      <! more display code here >
}   // End of if statment
            else{
                // Clear the user data fields
                description.setText( " " );
                       <! more display code here >
            }   // End of else statements
            // Close the result set in preparation for the next query
            lineInfo.close();
        }   // End of try block
        catch( Exception e ){
            // Display a dialog box informing the user of the problem
            Object[] options = { "     OK     " };
            JOptionPane.showOptionDialog( null, e.getMessage(),
                    "Error",
                    JOptionPane.OK_OPTION, JOptionPane.ERROR_MESSAGE,
                    null, options, options[ 0 ] );
        }   // End of Exception catch
        // Get the related area information
        populateAreaCombo( lineNo );
private void populateAreaCombo( int lineNo ){
        // Format the areaComboBox
         try{
            // Create a command to get the devices from the database
            String command = new String( "select Area, [Name], [Description] " );
            command += "from tAreas where( Line = ? )";
            // Create the SQL statement to grab the information, and
            // populate the search parameter
            PreparedStatement getAreas =
                    _connection.prepareStatement( command );
            getAreas.setInt( 1, lineNo );
            // Execute the command
            ResultSet areas = getAreas.executeQuery();
            // Loop through the result set, and add collect the areas
            Vector< String > controlAreas = new Vector();
            while( areas.next() ){
                // Add the area to the comboBox
                controlAreas.add( Integer.toString( areas.getInt( "Area" ) ) +
                        " - " + areas.getString( "Name" ) + ": " +
                        areas.getString( "Description" ) );
            }   // End of while loop
                  <! more display code here >
                The application always seem to pause at the second PrepraredStatement call:
PreparedStatement getAreas =
                    _connection.prepareStatement( command );This seems to be a very simple operation, and it is not even the execution of the query where the long delay is realized. Rather, it is in the actual creation of the object prior to the execution.
The delay is very repeatable at this exact statement each time.
Additionally, of interest, is that the delay is only realized on computers remotely connected to the database. If I run this code on the localhost, then there is no delay. As soon as I distribute it, then the delay is incurred. That being said, there is not a network related issue that I can identify here. I have even isolated the server to be on the network with just one other PC, and the delay still persisted.
Does anyone have any ideas?
Thanks

I can determine where the delay occurs by adding
dialog boxes at a bunch of different steps, then
monitoring them for when they appear; a little
archaic, of course, but an easy way to find this
out.You should
1. Get the start time
2. Get the current time at each step.
3. Print the results at the end.
4. Repeat a number of times to average.
>
When you say that I should not mix database code with
display code... What exactly do you mean? To be
more precise in my description, I was simply setting
a bunch of different text fields and/or check boxes,
etc., based on the result set returned. It was not
as if I was creating a portion of the GUI there or
something. I am assuming that is an allowable
practice...
You should have a class that does nothing but the database work. That class should be used by other classes (like classes that do GUI.)
I have made little effort to close my resources, and
sometimes they are not closed at all. When you say
"resources", what exactly do you mean by that? Are
you referring to the result sets, for example? I do
not know of other resources that need to be closed,
except for the connection to the DB itself. This, I
have as persistent throughout the duration of the
user's session.
You must close result sets, statements and connections. They must be closed in that order.
I am not running this code on the Internet, but it
has been designed to be run on a small corporate
network ( < 10 users). This is why I opted for the
applet to run the entire application through instead
of doing more HTML work.That is ok.

Very slow performance; external boot drive the cause?

Greetings.
I bought a 500 GB Hitachi drive for my iMac intending to install it myself. But, alas, I have an iSight iMac and I think it's beyond my ability to do the job. A Mac dealer nearby can do it for me, but wants the computer for two or three days, even thought the installation takes about an hour. They will not make an appointment for me to come in with it and wait.
So I installed it the drive in an OWC Mercury Elite case, cloned the original drive, and have been booting from the Hitachi via Firewire 400. Just about everything is running at well under previous speeds. Lightroom now takes as much as two to five minutes to spool a large file for printing and sometimes does not even send the file to the printer (in fairness, the latter issue happened sometimes with the internal drive – I wrote about it here before – but at least it didn't take a long time to spool the file, which has to happen each time I click "print" until at last it actually goes to the printer).
I'm getting slow performance from Safari (4.1.3), Mail (2.1.3), Lighroom 2, Photoshop (CS3). I can't say I've noticed problems elsewhere, but I rarely use other applications.
I have done all the usual maintenance tasks, besides those the computer does automatically. Repaired permissions. Emptied caches. Burned sage. Etc.
If this is the inevitable result of running from an external disk, then I'll have to brave the installation or pay someone to do it (which I would do immediately if I knew someone who would do it "while-u-wait").
If, however, this sounds like booting from the external drive should not be the problem, and there is something I might do to speed things up, I'd be grateful for your suggestions.
As always, thank you.
Leonard B.

Too bad about the site redesign. I had a draft of this message started, then got busy. Now I have no idea where to look for it. (And what happened to the Preview function?)
ANYWAY… I talked to a tech person at Other World Computing about the problem. He was of the opinion that the iMac SHOULD be showing some slower response if booted from the external drive, but that maybe the sluggishness in this case was excessive. He had me run a hardware scan to see whether there were any bad blocks. After 24 hours, Speed Tools reported no problems. So now I have run every diagnostic and repair tool I know of and every one that was suggested (every one that I own, that is), and the computer is still hesitating so much that I just have to get up and walk away from it sometimes in order to stay sane.
I am booting from the original hard drive when I have to do extended internet research (Safari being the biggest speed offender), but run the iMac from the external drive when I have to do photo editing, since all my preferences, Lightroom libraries, etc., are located there. If I had the time to figure out just where the essential, and relevant, system and application files are located, I suppose that I could copy them and move them onto the internal drive. Then I could just use the external for storage of the image files (can't do that on the internal; there's not enough space). However, if what is going on (slowness issue) is indicative of a faulty drive, I'd rather not use it at all, even as a storage or backup drive.
Any thoughts? Do you suppose this might be a problem with the computer, not with the new drive? I'd hate to ask OWC to exchange it (even if they would do that) and then find out I've got the same trouble.
Thanks again in advance.
Leonard

Slow performance from Premiere Elements 10

Hi guys,
I recently purchased Premiere Elements and Photoshop Elements 10 to edit some wedding video. I am experiencing some slow performance with the software (and random lockups for that matter). My CPU usage shows nearly nil when using the program and with IE with multiple tabs open at the moment and the Premiere Elements open, I am showing that I still have about 5GB of RAM free. However, I am still getting some slow performance from the software with random lockups. The video came from a sony HDR-CX700V camera, it is all 1080P video and there is about 3 hours worth of footage added to my current project. I imported the footage by just dragging and dropping the video folder contents into the "Project" tab within the program.
An example of the slow performance I get is this. I added a Title card to start before the video. When I hit play to see how it looks, the preview screen shows nothing, but you can see the time scrolling, then the video suddenly starts, but the video is really choppy. I also had a heck of a time just adding that title card, as when I did it the program crashed once and locked up a couple of times. Any ideas how I can fix this? What other information would you need to help me further troubleshoot the problem?
My system is has an i7-720 with 8GB of RAM and an NVIDIA GTX260M with the latest driver from NVIDIA.
TIA guys!

One - your project must match your video... if you have a red line over the timeline immediately after importing the video, your project is wrong
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainspector.massanti.com/
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
Two - how many hard drives do you have, and how is your project configured?
My 3 hard drives to edit AVCHD are configured as...
1 - 320Gig Boot for Win7 64bit Pro and all program installs
2 - 320Gig data for Win7 paging swap file and video project files
When I create a project on #2 drive, the various work files follow,
so my boot drive is not used for the media cache folder and files
3 - 1Terabyte data for all video files... input & output files (*)
(*) for 4 drives, drive 3 all source files & drive 4 all output files
Search Microsoft to find out how to redirect your Windows paging swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US

Extremely slow performance on projects under version control using RoboHelp 11, PushOk, Tortoise SVN repository

We are also experiencing extremely slow performance for RoboHelp projects under version control. We are using RoboHelp 11, PushOk and a Tortoise SVN repository on a Linux server. We are using a Linux server on our IT guys advice because we found SVN version control under Windows was unstable.
When placing a Robohelp project under version control, and yes the project is on my local machine, it can take up to two hours to complete. We are using the RoboHelp sample projects to test.
We have tried to put the project under version control from Robohelp, and also tried first putting the project under version control from Tortoise SVN, and then trying to open the project from version control in Robohelp. In both cases, the project takes a ridiculous amount of time to open. The Robohelp status bar displays Querying Version Control Status for about an hour before it starts to download from the repository, which then takes more than an hour to complete. In many cases Robohelp becomes unresponsive and we have to start the whole process again.
If adding the project to source control completes successfully, and the the project is opened from version control, performing any function also takes a very long time, such as creating a topic. When I generated a printed documentation layout it took an astonishing 218 minutes and 17 seconds to complete. Interestingly, when I generated the printed documentation layout again, it took 1 min and 34 seconds. However when I closed the project, opened from version control, and tried to generate a printed documentation layout, it again took several hours to complete. The IT guys are at a loss, and say it is not a network issue and I am starting to agree that this is a RoboHelp issue.
I see there are a few other discussions here related to this kind of poor performance, none of which seem to been answered satisfactorily. For example:
Why does it take so long when adding a new topic in RH10 with PushOK SVN
Does anybody have any ideas on what we can do or what we can investigate? I know that there are options for version control, but am reluctant to pursue them until I am satisfied that our current issues cannot be resolved.
Thanks Mark

Do other applications work fine with the source control repository? The reason I'm asking is because you must first rule out that there are external factors causing this behaviour. It seems that your it guys have already looked at it, but it's better to be safe than sorry.
I have used both VSS and TFS and I haven't encountered such a performance issue. I would suggest filing it as a bug if you rule out that the problem is not related to external influences: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
Kind regards,
Willam

Slow performance after installation of new OS-X

I don't know if anyone else has been experiencing the same problem as me, but it seemed to occur after I installed the new OS-X.
My MacBook Pro has gone stremely slow and it seems to be related to MAIL. I thought that the standard MAIL program that comes with MAC was the problem, so I installed Postbox and that seemed to work for a while (1 day or 2) and then it was the same. It's not just email programs that are slow, but all programs.
Click and wait seconds (10, 20, 30 sec) just for a program to open. Moving between files is so slow. I feel like I'm using Windows again.
I'm no expert, but when I look at MEMORY usage, out of 4GB I'm using 3.8GB. My Virtual Memory is 4.76GB. See screen shot below.
I would apprecaite if anyone can help me resolve what the problem is.
Thanks
Richard Giuliano

First, back up all data immediately unless you already have a current backup. If you can't back up, stop here. Do not take any of the steps below.
Step 1
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail | awk '/:/{$4=""; print}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Reset the System Management Controller.
Run Software Update. If there's a firmware update, install it.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the View menu or the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

CS5 or Pc Slow performance?

Hi there,I have a problem with my pc at work and because I am not quite sure in which one is exactly the problem I decide to ask you.The pc is intel pentium 4 with 3 Gb Ram XP professional service pack 3 Photoshop CS 5.
The pc is connected to server(data base).When I open a bunch of photos (20-30) approximately 8 - 12 MB each one and sometimes I experience a slow performance(for example I am trying to retouch/clone something and it takes a lot of time for the pc to redraw/respond) the interesting part is that it doesn't happen always(sometimes can be even 3 photos and it will take ages to do something) also I notice that after appr. 20 minutes it's suddenly start to work as it should normally(it's like there was an update and when is updated/complete everything is fine).When that start to happen today I restart CS5 and load the same photos and it work fine, so it is really bizarre for me.I put a 89% ram usage to the CS5(I pretty much use only all the time Photoshop and bridge ) also made the history steps to 7 and the cache to 6 for big and flat files.I was checking the Efficiency and it's all the time 100 % so it's like it's not the photoshop but like I said today i just restard the ps and upload the same photos and got fix...I tried to copy the photos on my hard drive(so it should not be affect of the performance of the server but still the same as when I take them straight from the server.Because the hard drive is only 80 gb ( I don't store anything there ) i did clean up and disk defragment still the same situation.Do you know what can be the problem and is it the Photoshop or the Pc?I'll appreciate it.
Thank you

Could be that your PC is sometimes looking to check things on the server, and maybe the server or network is busy/bogged down and you PC gets caught in that cycle mess.....so,
suggest next time you use Ps, set win performance monitor perfmon.exe or perfmon.msc ; setup to view graph of disk use and network activity and cpu usage.....then you may see/track a problem area.
on win7, task manager does most of the same stuff

First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

Restore iPad to Factory Default; do not restore from backup. It may be the cause of the problem.
Settings>General>Reset>Erase all content and settings

Slow performance of discoverer portlets

Hi,
I am running into slow performance of a particular page in portal, there are multiple sites hosted on the portal but these all have static text and are very quick to load but the one page with discoverer portlets and a web-clippping portlet is taking ages. If I run these reports on their own they are instant. Has anyone had similar problems with 9.0.2 portal and the discoverer reports ? I tried to identify a particular report that may be the culprit by deleting them one by one and to no avail. After a few hours effort I found the design mode was hanging as well. Again, just for this 1 page.
There are 3 tabs on this page with about 4 report portlets and 1 web-clipping portlet.
Thanks for any help,
Brandon

Thanks for the help.
Seems to have been resolved although I'm not sure if thats the end of the story. Will wait and see.....
So far apparently a port conflict of some sort in the discoverer config was causing it to hang and then also other system demands on the network and server housing the discoverer end-user layer were also causing problems.
No error messages unfortunately......

Server 2012 R2 slow performance over all

This is a DELL PowerEdge R820 / 256GB RAM / 4TB onboard storage configured as Remote Desktop Services Host /TS... running QuickBooks, MS Office 2010 STD, Symantec EndPoint Protection (basic antivirus installation ONLY)... 1 month old server... SUPER fast,
super powerfull.... Part of an AD in SBS 2008 Premium... single NIC card 4 ports / 3 ports disabled. single IP... no VLANS... server is able to resolve ANY pc, DNS record with no problems... able to resolve DC by name, able to receive GP, able to update, able
to do everything that I can think of.... EXCEPT... anything I open, word, excel, QuickBooks, IE.... takes forever to open... after the application is open is fast but to open anything takes 3-4 minutes.... open ticket with Symantec all looks good, created
lots of exceptions for antivirus/real time scanning, open ticket with QuickBooks: files look good application was removed and reinstalled to be sure all was done correctly... check the binding order for the disabled NIC; the active one is TOP option, no errors
at all in event viewers for system, application, setup, no errors at all in DELL management tool, no hard drive errors, no controllers errors.... this server is replacing an old dell poweredge 2008 STD with 24GB RAM... the old DELL opens the same applications
way faster than the new one... same Quicken version; old server opens Quicken in seconds, new one 3-4 minutes..... Real time monitoring NEVER goes above 1% for CPU and 3% for memory utilization.... one more thing... removed antivirus 100% restart... same performance
without antivirus.....
Any ideas will be great as of how to troubleshoot the slow performance....
Thank you!

Hi,
As Sam suggested, please check if there any issue occurred in hard drive.
On current situation, please also refer to following steps and troubleshoot, then check if we can find more
clues.
Please check if you have installed all necessary updates for the Windows Server 2012 R2.
Please
perform a clean boot to check if there has software conflicts.
Please use Resource Monitor to troubleshoot and check if we can find some more details.
Using Resource Monitor to Troubleshoot Windows Performance Issues Part 1
Using
Resource Monitor to Troubleshoot Windows Performance Issues Part 2
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Slow Performance - Java Related?

This is an old box that I bought used recently, but the system install is recent. The system performs very slowly - about 50% of the speed of comparable Mac's in the XBench database. If I use Xupport to manully run "All" of the system maintenance crons I get some improvement, but it quickly goes back to being slow.
Looking at my logs I have a "boat load" of Java errors under CrashReporter; there will be a string of "JavaNativeCrash_pidXXX.log" entries - many of them, as follows:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : Bus Error occurred at PC=0x908611EC
Function=[Unknown.]
Library=/usr/lib/libobjc.A.dylib
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Many of the line entries that follow, but not all of them, refer to SargentD2OL, which is a Java app, which I installed, but it did not work properly so I removed it. Yet I continue to get Java errors that refer to this now non-existant app.
I have read that Java apps use a lot of resources, and that D2OL in particular uses a lot of resources. Can my slow performance problem be Java related? If so, any idea of how I can fix this problem?
G4 AGP Graphics Mac OS X (10.3.9) 500 MHz, 512M RAM

Sorry to take so long to respond, but other issues in life have demanded my attention.
None of the solutions given have had any affect. My Java folder has both a 1.3.1 and a 1.4.2 app - the Java Update 2 will not reinstall because it sees an up-to-date app in the folder. But reading the update file it says the older Java will be removed - but it is still there. Problem?
On XBench the system scores a 9 to 10, while similar boxes on the XBench database score around 18 to 20. My cpu, memory, and video scores are very low. The HD through-put scores are the only ones that are normal. TechTool Pro 4 finds no problems. I have removed the memory sticks one at a time and retested after each cycle - no difference.
I have two drives, each with a 10.3.9 install. One works fine, scores around a 17 on XBench, the other scores a 9 to 10. So it appears to be a software problem. The slower install is a drive from a iMac G3 that has been moved to the G4 - are there issues with this?
My favored drive is the prior G3 one (newer and faster than the other drive that system tests faster in XBench) - it has my profile and all my info on it. It worked fine in the G3 - no problems.
Thanks for the help,
G4 AGP Graphics Mac OS X (10.3.9) 500 MHz, 512M RAM, ATI 8500

Printer redirection Slow performance

Similar Messages

Maybe you are looking for