Printer region code

I have a Officejet 7210 which was originally purchased in the US and was moved to Ireland when my company set up a sub office.
The HP website told me that HP 338 cartridge would work on the printer. When i install it it tells me it's the wrong cartridge.
How do i change the region code of the printer to accept the local cartridge

Stephen27 wrote: I am having the same problem. Bought the HP C3180 in the United States, but have moved to France. I contacted HP customer support here in France, and they told me the printer was obselete and could not be reset. They did not give me a case number.
I will send you a private message here asking for some additional information. HP should be able to resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

HP OfficeJet 7310xi printer error code 0x885e2da6 during startup

HP OfficeJet 7310xi printer error code 0x885e2da6 during startup, will not progress to head alignment or connecting to the network after running for a long time. Fax light blinks exclamation mark blinks as does the power light after the three clicks during power-up. Ink cartridges never move.

Contact HP technical support at 800-474-6836 for more options.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
Country-language selector.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Hp officejet pro 8100 and it does not print bar codes from UPS or USPS

have an hp officejet pro 8100 and it does not print bar codes from UPS or USPS. Can you please please help? i have used my ipad, by HP G62-355DX Notebook and neither will give me printed bar codes. The balance of the mailing label do print, just not the bar code. It may be my imagination, by I believe it used to print thebar codes.

Hi,
Try adding an alternate driver and try to print.
To use an alternate print driver for HP printers in Windows 7:
1. Click on the Start menu.
2. Click on Devices and Printers.
3. Click Add a Printer
4. Add a local Printer
5. Select Create a New Port
6. Select Standard TCP\IP port
7. Enter Printer IP address (Printer IP address can be found by printing network config page from printer
8. Under Manufacturer select HP and under printer select HP Officejet 8000 pirinter or Officejet 7410
9. Click apply and try printing
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Use abap report program to print bar code instead of smartforms

Do anyone know how to use abap report program to print bar code?

Hi Celina,
http://searchsap.techtarget.com/tip/1,289483,sid21_gci839063,00.html
I hope this will help, also it depends on the barcode type like ARTNR-code 128...
Regards,
Sudhi

How to delete the region code for country in T005U

Hello,
The region code for XX country are changed, So I have deleted all entries for that country in transaction code "OVK2" and updated the new region code which should be updated in Table T005S and T005U.
But in table T005U there are few region code for language other then EN. Now I need to delete the entries T005U for other language.
Now region code in OVK2 = Table T005S, but not equal to T005U
How language can be selected to delete the region code (TABLE T005U), please advise.
Thanks in advance.
Praveen

Hi Praveen,
In order to delete the entries from the language table T005U, you will have to maintain in T005S.
It means that, suppose in table T005U, you have a region appearing in two languages danish and german and the corresponding entry does not exist in T005S, then follow the steps below.
1. Maintain Region XX in EN in T005S.
2. Log on in language Danish, and in table T005U, only delete the text and log off.
3. Log on in Language German, and in table T005U, delete the text only and log off.
4. Now your T005U table is clear, log on in language EN and delete from table T005S.
5. Check both tables T005S and T005U for the region XX. they both should be empty.
Regards,
SAPFICO

How to print claim code for envy 5530 without connecting to internet?

how to print claim code for hp envy 5530 without connecting to internet. We do not have wireless internet and we are trying to set up the eprint app for our samsun android phones and ipad. We need to print off the claim code from the printer but it seems we need to have internet for that. is there any way around that?
Thanks

Hi,
You have to, without connecting to the internet, the claim code (if you can get one) is useless.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to Print Bar codes in SAP script.

Hi Experts,
Could you please tell me how to print bar codes through sapscript (the steps basically)?
<<text removed by moderator>>
Thanks in advance,
Suchi.
Edited by: Matt on Nov 13, 2008 2:04 PM - do not use ASAP or urgent.

hi,
check these.
[https://forums.sdn.sap.com/click.jspa?searchID=18572128&messageID=4724540]
[http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm]

How to print BAR code in SMART Form

Hi All,
I have the requirement to print BAR CODE in Smartforms.
For this, I create a character format with Bar code in style forms and create a text element in Smart form and associate bar code character format with this text element.
Now when I look the print preview for the data, then it shows me data in bar code format but not in right format i.e. its shows me all the similar block in bar code.
If you look the bar code in SAP script, its always show you bar code with similar block, but in SMART FORM it will show you exact bar code; as in SAP Script, bar code is generated at printer end and in SMARTFORM bar code is generated as graphic in SAP and then sent to printer for print.
PLease let me know, why in SMARTFORM its not showing BAR CODE in correct format in print preview.
Thanks
Piyush Mathur

Hi,
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Detailed information about SAP Barcodes
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
reward if useful
regards,
ANJI

Printer claim code, printer laserjet 600

Hi,
To get the printer claim code, I enter the IP address listed on the configuration page but I keep getting "problem loading page," so I cannot connect to the HP Embedded Web Server. I've triple-checked the IP address so I know I'm not entering it in wrong.
Please help.

Hi,
Please use the following setup to get claim code:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03550536#N304
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My HP 309a all in one printer will not print bar codes like airline boarding passes or tickets.

I use Windows 7 with XP Pro I have received no error messages and have plenty of free disc space. I have not a clue as to what has happened. I see the ticket with a bar code on my computer screen but when I try to print it the bad code will not print. Any suggestions?

my hp6980 printer won't print bar codes using windows 7 on computer

Req: Example of report sending a printer escape code

Hello, I have a batch report that prints student transcripts. After a transcript, I need to tell the printer to staple.
Please point me to an example of sending a printer escape code.
By the way I'm printing from Win98 to a Konica 7055 using the postscript driver.
Thanks!
Gary C. Whitaker
St. John Health System
Information Systems
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
hello,
i have in trouble in same kind of problem if you able to get ride off this problem please help me.
i have designed a charachter mode report that require a page size height 66 and width 132 portrait mode to print,
i need to print this report on a generic printer, i have tried various generic printer defination files that are shipped with oracle reports, but the printer prints it according to the page size of height 66 and width 80 becuse of which data gets truncated, however if i send the output a file then it is correct.
Any body please could tell me what i should do, i am gone blank?
Thank you in anticipation of reply.<HR></BLOCKQUOTE>
null

My DVD Player hangs when trying to change the regional code the first time

Hello,
I am new to this forum and I couldn't find one for the DVD Player specific so I chose this one. Please direct me to a different one if my eyes were misleading me.
I have a new Macbook. Just over three month now and I attempted to watch a movie with the DVD Player last night the first time. When inserting the DVD, the DVD player comes up with a Screen asking me to change the Regional Code from 6 to 1. I don't understand this in the first place since I purchased my Mac within the US. But anyway, When I unlock it with my password and then click the "Set Regional Code" Button (Regional Code preset to one at this time), it turns blue and then the rainbow wheel for being busy shows up. Unfortunately it never leaves and going to the activity monitor it says (Not responding). That causes bad Windows Memories .
Tried multiple ways, let it run for 10 hours and it never returns to the world. Very frustrating, since this is the first time I tried to use this feature.
Is there any advice on how to set this to Regional Code 1. I only have to set it once, but I think there must be an option.
And yes, I know of VLC, but I still would prefer to use this regular DVD player. I think this should work somehow.
Computer out of the box, nothing other then iWorks and MS Office 2008 installed.
Any help is appreciated.
Thanks a lot
The Dark Lord
Bernd

Does the account you are using have admin rights? I found this :
http://support.apple.com/kb/HT2397
+In Mac OS X 10.3 Panther and later, users with administrative privileges aren't prompted to change the region the very first time a DVD-Video disc of a single region is inserted. Instead, the region of the DVD drive is automatically set to the region of the DVD disc that was inserted. Accounts that don't have administrative privileges must authenticate with an administrator account name and password, because changing the drive's region code requires administrative privileges.+
Sounds like it might be worth a try from an admin account first.

My printer was working fine. Now it will only print in code not words what do I do??

My hp officejet 4500 all in one wifi. Was working fine now it wont print words only will print in codes. Already reinstalled printer but that didn't correct the problem. Im desperate ;{

Did you completely power off the printer and the computer? Sometimes (maybe due to unexpected shutdown, glitch in the network, etc.), data get left in the port, and resulting in this behavior. A complete shutdown should clear the ports.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

Printing QR codes and Barcodes together

Dear All,
I have referred the following link to print QR code as a post script:
http://scn.sap.com/people/robert.russell/blog/2010/10/25/barcodes-in-sap-with-the-barcode-writer-in-pure-postscript
While printing my SAP Script/ SMARTFORM output on any printer, if I specify output device as ZBWIPP then QR code is being printed perfectly, but barcodes (Which are already there in script and are expected to be there) are not being printed at all. When the output is printed without specifying any output device, then only barcodes are being printed and not the QR code.
I have tried adding print controls ZBW01, ZBW02, ZBW09 and ZBW91 to the output type of printer, even then QR code is not being printed.
I request your advice and help on how to get QR code and barcodes printed together. Thank you.
Regards,
Kartik
P.S. These existing barcodes are of type BC_CD39, not post script barcodes.

Hi Karthik,
I have a requirement to
1) Output data from an internal table into excel, and
2) Create a chart from the data in excel
So far I have been able to export the data using OLE calls, created a chart object,.
My question:
1. How to put Data Lables
2. How to put Data Table under the Chart
3. How to rename the series names.
Below is the recorded Macro. I don't know how to convert it to ABAP.
Sub Macro1()
ActiveSheet.Shapes.AddChart.Select
ActiveChart.ChartType = xlColumnClustered
Application.CutCopyMode = False
ActiveChart.SetSourceData Source:=Range("B1:E4")
ActiveChart.SeriesCollection(1).Name = "=Sheet2!$A$2"
ActiveChart.SeriesCollection(2).Name = "=Sheet2!$A$3"
ActeChart.SeriesCollection(3).Name = "=Sheet2!$A$4"
ActiveChart.SetElement (msoElementDataLabelOutSideEnd)
ActiveChart.SetElement (msoElementDataTableWithLegendKeys)
End Sub
I have attached the current output and expected output.
I have searched about this in google but i could not find any solution for this.
Your help is greatly appreciated.
Current Output:
Expected Output:
I hope that I have explained my query clearly.
Thanks,
Lakshmi.

Any way i can change the region code after the fifth time?

I wasn't aware about the region code being lock after the fifth time.
Is there any way I can change the region code instantly?

No, the drive is permanently locked to the last code you used. If it's not on the one you would prefer, the only thing you can do it replace the drive.
Almost all drives you can get are region free. I couldn't tell you why Apple continues to use drives that require selecting a region.

Printer region code

Similar Messages

Maybe you are looking for