Printer Server configuration for APEX 3.1.2 in 10g XE

I have APEX3.1.2 installed in 10g XE and I am going thorough the OTN tutorial "[Oracle Application Express 3.0-- Building a Functional Application"|http://www.oracle.com/technology/obe/apex/obe30/apexdev30.htm#l7] in the section "Editing Application Objects".
When I click "Print Attribute" of a page region, it displayed "{color:#ff0000}Report printing is currently not available, there is no print server configured{color}".
Can you tell me what this means and how to resolve it. All I have is APEX3.1.2 installed in 10gXE.
I have searched this forum and it seems that I have to install/configure a printer server?
Thanks!
Kevin

Dan,
I have the same problem as Kevin.
Your answer to his question can be very helpful. But if I follow the link you provide, I cant find the step 5.2.
Step 5.1 is clear. But what are the tasks of step 5.2?
I hope that you can tell me this.
Thank you.
Carlos

Similar Messages

Web Server Options for APEX Installation on Oracle Database 10g

Hi. We are installation a APEX on a test server that is running Oracle Database 10g 10.2.0.4.0. As I understand it there are two Web Server Options:
1) Oracle HTTP Server (Apache)
2) Oracle Application Express Listener
Do both of these work for Oracle Database 10g 10.2.0.4.0? I thought I remember reading somewhere that only the Oracle Application Express Listener would only work with database version 11 or higher.

Do both of these work for Oracle Database 10g 10.2.0.4.0?Yes.
I thought I remember reading somewhere that only the Oracle Application Express Listener would only work with database version 11 or higher. No, that restriction (with the exception of 10g XE) applies to the third web server option which you haven't mentioned: Embedded PL/SQL Gateway (EPG), as discussed in your previous thread: +{thread:id=2201975}+
System requirements for APEX Listener
{forum:id=858} forum

The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the

When i tried to login in inbrowserediting.adobe.com i see that:
The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user.
What does it mean? What is problem?

Hi,
I have just created my First website using Muse and Its all been uploaded to my FTP server but i cant access the in browser editing which was the whole reason why i re-done the website for my client using muse
its saying the following
"The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user. server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user."
Yet i Can access my website fine "www.calmwood.com.au"
My ftp server responds to either the IP Address or the DNS Address www.calmwood.com.au
so i am not understanding how it thinks its different. when its fully referenced
any help would be appreciated.
thanks

Wireless Print Server compatibility for HP LaserJet P1005

I recently purchased a HP LaserJet P1005 for home use and was considering putting in a wireless print server at home for that printer and another that I have. Does anyone know what wireless print servers are compatible with this printer? I can't find a lot of information on print servers online and I'm having trouble with finding what would be compatible. Any help would be appreciated....thanks!

Compatible products for:
HP 2101nw Wireless G Print Server (Q6301A)
Black and White Laser Printers HP LaserJet P1005 Printer HP LaserJet P1006 Printer HP LaserJet P1500 Printer series HP LaserJet P2030 Printer series HP LaserJet P2050 Printer series
Color Inkjet Printers HP Deskjet 6980 Printer series HP Deskjet D2500 Printer series HP Deskjet D4200 Printer series HP Deskjet D4300 Printer series HP Officejet Pro K5400 Printer series HP Photosmart D5300 Printer series HP Photosmart D5400 Printer series HP Photosmart D7200 Printer series HP Photosmart D7400 Printer series
Color Laser Printers HP Color LaserJet CP1210 Printer series HP Color LaserJet CP2020 Printer series
Color Multifunction and All-in-One HP Color LaserJet CM2320 Multifunction Printer series HP Deskjet F4200 All-in-One Printer series HP Officejet 6300 All-in-One Printer series HP Officejet J4500/J4600 All-in-One Printer series HP Officejet Pro L7500 All-in-One Printer series HP Officejet Pro L7600 All-in-One Printer series HP Officejet Pro L7700 All-in-One Printer series HP Photosmart C4200 All-in-One Printer series HP Photosmart C4380 All-in-One Printer series HP Photosmart C5200 All-in-One Printer series HP Photosmart C6200 All-in-One Printer series
Specialty Photo Inkjet Printers HP Photosmart A520 Printer series HP Photosmart A530 Printer series HP Photosmart A620 Printer series HP Photosmart A630 Printer series HP Photosmart A820 Home Photo Center series HP Photosmart B8550 Printer series

Service Manager Data Warehouse Install - Analysis Server Configuration For OLAP Cubes Fail

Hello everyone,
I have an issue with my installation of the Data Warehouse for System Center Service Manager 2012 SP1.
My install environment is the following:
Windows Server 2012 – System Center Service Manager (Successfully Installed) - Virtual
Windows Server 2012 – System Center Data Warehouse (Pending) - Virtual
Windows Server 2012 – MS SQL Server 2012 – Physical, Clustered 1<sup>st</sup> of Four Servers
The SQL Server is a clustered installation with named instances, specifically for SharePoint and Service Manager. Each instance has its own IP address and dynamic ports are turned off. I’m installing using the domain administrator account and I also chose
to run the installer as administrator. The domain admin has sysadmin rights to the service manager server and instance I’m trying to install on. However, the account does not have sysadmin rights to some of the other instances.
The install is smooth up until it needs to connect to the Analysis server database. I have tried connecting to the analysis servers on other SQL servers on site and all were successful. The only difference between the older SQL servers, the SQL 2012 development
server and the SQL 2012 Production server I’m trying to install to is that the that the domain admin account doesn’t have sysadmin access on all the databases on the new production server. The SQL server is being installed and configured by a contractor so
if you all have troubleshooting suggestions, I’ll need to coordinate with the contractor.
Starting with the screen below, I began searching for help online. There seems to be no one else with this issue or it is not documented properly. I opened a ticket with MS, called the contractor and troubleshot with him, troubleshot as far as I could on
my own and I’m still at a loss as to what is preventing the installer from connecting specifically to the analysis server.
I first thought the installer was at issue or that the data warehouse sever was at issue. But all signs are pointing at the SQL server. The installer is able to connect to all the other SQL servers – including other 2012 servers (same versions) – so it can’t
be the installer. I’m pretty sure the SQL server is going to be at issue.
After looking at this error, I opened the resource monitor and clicked the dropdown to see if it was trying to connect to the correct server and it was. I then connected to the old and new test and development servers successfully. Then connected to the
SQL 2008 R2 production cluster successfully. I then compared the two servers. The only difference other than the version numbers is that the admin account doesn’t have sysadmin rights on all the SQL 2012 database servers. But the database servers are not the
problem. The analysis servers are.
I then checked the event logs and they are empty as far as this issue is concerned. Actually, there are no errors on the SQL 2012 production box and the Data Warehouse box. I then checked the log that the installer creates during every step of the installation
and this is what is created when the dropdown is clicked for the analysis server configuration screen. The log file location is:
“C:\Users\admin\AppData\Local\Temp\2\SCSMSetupWizard01.txt”
In the file is the following text.
01:03:34:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012
01:03:34:Using SQL Server 2012 management scope on SCSMSQL2012
01:03:36:Collecting SQL instances on server SCSMSQL2012
01:03:36:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:36:Using SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:38:Found SQL Instance: SCSMSQL2012\PWGSQL2012
01:03:38:Found SQL Instance: SCSMSQL2012\SCSMSQL2012
01:03:39:Error:GetSqlInstanceList(), Exception Type: Microsoft.AnalysisServices.ConnectionException, Exception Message: A connection cannot be made. Ensure that the server is running.
01:03:39:StackTrace:   at Microsoft.AnalysisServices.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenConnection(ConnectionInfo connectionInfo, Boolean& isSessionTokenNeeded)
   at Microsoft.AnalysisServices.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession)
   at Microsoft.AnalysisServices.Server.Connect(String connectionString, String sessionId, ObjectExpansion expansionType)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetASVersion(StringBuilder sqlInstanceServiceName)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetSqlInstanceList(String sqlServerName, Int32 serviceType)
I’m now investigating the issue according to this output, and decided to ask you all if you’ve run into this issue and found a resolution.

I am running into same issue . But I don't anything in the instances section related to portipv6 . I do see in the listener section , I tried to remove it . But it comes up again . Please help
<ConfigurationSettings>
<Security>
<RequireClientAuthentication>0</RequireClientAuthentication>
<SecurityPackageList/>
</Security>
<Network>
<Listener>
<RequestSizeThreshold>4095</RequestSizeThreshold>
<MaxAllowedRequestSize>0</MaxAllowedRequestSize>
<ServerSendTimeout>60000</ServerSendTimeout>
<ServerReceiveTimeout>60000</ServerReceiveTimeout>
<IPV4Support>2</IPV4Support>
<IPV6Support>2</IPV6Support>
</Listener>
<TCP>
<MaxPendingSendCount>12</MaxPendingSendCount>
<MaxPendingReceiveCount>4</MaxPendingReceiveCount>
<MinPendingReceiveCount>2</MinPendingReceiveCount>
<MaxCompletedReceiveCount>9</MaxCompletedReceiveCount>
<ScatterReceiveMultiplier>5</ScatterReceiveMultiplier>
<MaxPendingAcceptExCount>10</MaxPendingAcceptExCount>
<MinPendingAcceptExCount>2</MinPendingAcceptExCount>
<InitialConnectTimeout>10</InitialConnectTimeout>
<SocketOptions>
<SendBufferSize>0</SendBufferSize>
<ReceiveBufferSize>0</ReceiveBufferSize>
<DisableNonblockingMode>1</DisableNonblockingMode>
<EnableNagleAlgorithm>0</EnableNagleAlgorithm>
<EnableLingerOnClose>0</EnableLingerOnClose>
<LingerTimeout>0</LingerTimeout>
</SocketOptions>
</TCP>
<Requests>
<EnableBinaryXML>0</EnableBinaryXML>
<EnableCompression>0</EnableCompression>
</Requests>
<Responses>
<EnableBinaryXML>1</EnableBinaryXML>
<EnableCompression>1</EnableCompression>
<CompressionLevel>9</CompressionLevel>
</Responses>
<ListenOnlyOnLocalConnections>0</ListenOnlyOnLocalConnections>
</Network>
<Log>
<File>msmdredir.log</File>
<FileBufferSize>0</FileBufferSize>
<MessageLogs>Console;System</MessageLogs>
<Exception>
<CreateAndSendCrashReports>0</CreateAndSendCrashReports>
<CrashReportsFolder/>
<SQLDumperFlagsOn>0x0</SQLDumperFlagsOn>
<SQLDumperFlagsOff>0x0</SQLDumperFlagsOff>
<MiniDumpFlagsOn>0x0</MiniDumpFlagsOn>
<MiniDumpFlagsOff>0x0</MiniDumpFlagsOff>
<MinidumpErrorList>0xC1000000, 0xC1000001, 0xC100000C, 0xC1000016, 0xC1360054, 0xC1360055</MinidumpErrorList>
<ExceptionHandlingMode>0</ExceptionHandlingMode>
<MaxExceptions>500</MaxExceptions>
<MaxDuplicateDumps>1</MaxDuplicateDumps>
</Exception>
</Log>
<Memory>
<HandleIA64AlignmentFaults>0</HandleIA64AlignmentFaults>
<PreAllocate>0</PreAllocate>
<VertiPaqPagingPolicy>0</VertiPaqPagingPolicy>
<PagePoolRestrictNumaNode>0</PagePoolRestrictNumaNode>
</Memory>
<Instances/>
<VertiPaq>
<DefaultSegmentRowCount>0</DefaultSegmentRowCount>
<ProcessingTimeboxSecPerMRow>-1</ProcessingTimeboxSecPerMRow>
<SEQueryRegistry>
<Size>0</Size>
<MinKCycles>0</MinKCycles>
<MinCyclesPerRow>0</MinCyclesPerRow>
<MaxArbShpSize>0</MaxArbShpSize>
</SEQueryRegistry>
</VertiPaq>
</ConfigurationSettings>

Print server configuration

Hi,
I would like to start our first Print server using windows 2008 Print service. I have went through some related forums here but have not fully understood how to create queue and push clients. So far i have done the following:
- Installed new win 2008 server with print services
- Created Printers in print management, installed necessary print drivers.
What is next? Do I need to share the printers in server?
Thanks for your support.

if yoiu have created a printer, you have created a queue.
A queu is not more than a link between a port and a driver that has a nice name and a seperate set of settings. It visualises as a 'printer'. You can have multiple queues pointing to the smae physical printer, that's why teh queues are referred to as queues
and not as printers.
You will indeed need to share the printers for client computers to be able to see them.
from client perspective, a shared printer is used a bit like a fileshare. Browse to the server
\\printeserver and doubleclick the printer, or browse to
\\printserver\printersharename. the cleint will download the drivers and create a link to the printqueue taht th user will be able to use like a local printer.
in larger deployments, you could consider mapping the printers via a loginscript or publishing the printers to Actove directory, but make sure you shared printers work first :)
MCP/MCSA/MCTS/MCITP

Belkin Print Server support for Epson Stylus photo R200

I have just installed a Belkin Wirless G adsl modem router, which works very well and I very satisfied with it. Along with this I purchased a Belkin Print server F1UP0001uk to drive my Epson stylus photo R200. While I can see my Print server and ping it satisfactoraly and it can see my printer. I can't get it to print.
Belkin tell me that I have to change the CUPS port from 515 to 9100 for print server port1 or 9101 for port2 on each machine I want to connect from.
How do I do this?
G4 Mac OS X (10.3.9)

What they are describing is the HP Jetdirect protocol on OS X, called raw/port 9100 printing on Windows. To use port 9100, in Printer Setup, select IP printer > HP JetDirect and it will work (9100 is the default port number). To use port 9101 requires the advanced method. In Printer Setup, after you click ADD, hold down the option key while clicking More Printers (you may need to pause a bit before the More Printers, because OS X is searching for Bonjour printers). At the bottom of the new menu, select Advanced, then select Appsocket/HP Jetdirect. Name it. Fill in the URI like:
socket://[IPofserver]:9101

Best practice for server configuration for iTunes U

Hello all, I'm completely new to iTunes U, never heard of this until now and we have zero documentation on how to set it up. I was given the task to look at best practice for setting up the server for iTunes U, and I need your help.
*My first question*: Can anyone explains to me how iTunes U works in general? My brief understanding is that you design/setup a welcome page for your school with sub categories like programs/courses, and within that you have things like lecture audio/video files and students can download/view them on iTunes. So where are these files hosted? Is it on your own server or is it on Apple's server? Where & how do you manage the content?
*2nd question:* We have two Xserve(s) sitting in our server room ready to roll, my question is what is the best method to configure them so it meets our need of "high availability in active/active mode, load balancing, and server scaling". Originally I was thinking about using a 3rd party load balancing device to meet these needs, but I was told there is no budget for it so this is not going to happen. I know there is IP Failover but one server has to sit in standby mode which is a waste. So the most likely scenario is to setup DNS round robin and put both xserves in active/active. My question now is (this maybe related to question 1), say that all the content data like audio/video files are stored by us, (We are going to link a portion of our SAN space to Xserve for storage), if we are going with DNS round robin and put the 2 servers in Active/Active mode, can both servers access a common shared network space? or is this not possible and each server must have its own storage space? And therefore I must use something like RSYNC to make sure contents on both servers are identical? Should I use XSAN or is RSYNC good enough?
Since I have no experience with iTunes U whatsoever, I hope you understand my questions, any advice and suggestion are most welcome, thanks!

Raja Kondar wrote:
wht is the Best Practice for having server pool i.e
1) having a single large serverpool consisting of "n" number of guest vm
2) having a multiple small serverpool consisting of less of number of guest vm I prefer option 1, as this gives me the greatest amount of resources available. I don't have to worry about resources in smaller pools. It also means there are more resources across the pool for HA purposes. Not sure if this is Official Best Practice, but it is a simpler configuration.
Keep in mind that a server pool should probably have up to 20 servers in it: OCFS2 starts to strain after that.

WWI Server configuration for EHS

Dear Experts,
First time i have sucessfully installed and started the EHS in my Server, but after installing MS Word in my server i have uninstalled teh EHS and installed again in my server but this time EHS service is not running it is giving the following message when i have starting manually.
"Could not start the EH&S Administration Management Server service on
Local Computer.
Error 1053: The Service didnot respond to the Start or control request
in a timely fashion"
I am trying to creating service manually using ehsManSrv.exe it is giving following message
C:\Program Files\SAP\FrontEnd\SAPgui\wwi>ehsManSrv.exe /R
EH&S Administration Management Server
Info:
Open file 'C:\Program Files\SAP\FrontEnd\SAPgui\wwi' (and create if necessary)
Error:
Unable to open file due to following reason
C:\Program Files\SAP\FrontEnd\SAPgui\wwi\ contains an invalid path.
HelpContextID = 61859
Please help me needfull
Regards
Chandra

Hi Brahmankar,
I have successfully installed EHSWWI32_19-20000084.exe, it is running properly i have check in CGSADM, but when i am editing document in CG42 i am getting following error.
"Error occurred while assigning the document template wwilayt.dot"
even i have maintained all register entries in server as per 866032 note. but still it is showing that
"Check whether WWI is installed correctly. The following registry entry must exist for the document template wwilayt.dot:
HKEY_CLASSES_ROOT/WWIDOCUMENT/InstallDir"
Regards
Chandra

"print server" solution for releasing print jobs

hey everyone,
I have an internet cafe full of mac minis (12) that are all networks (LAN) through a unmanaged switch. I am adminstratring them with Apple Remote Desktop (has been working great).
Here is what I want to do. I am setting up a printer soon with networking capabilities. Here is what I had in mind but if someone has an easier or better setup than please share.
Connect the printer to the control comptuer (the one adminstrating all the comptuers through ARD) and then have some sort of software (or hardware?) that when a customer sends something to the printer I can "release" it from my comptuer once they pay.
Thanks so much for the help in advance!
peace will

hey
no one?
peace will

Setup PRINT server in Apex 3.0?

Hi all,
I need setup print server on upgraded Apex 3.0 and looking at instructions or manuals
thanks in advanced
Gordan

Hi all,
I need setup print server on upgraded Apex 3.0 and looking at instructions or manuals
thanks in advanced
Gordan

V30 - Print Server requirements

Are the requirements / instructions posted available for setting up a print server for PDF printing in V30?
Having spent two days with many aborted installs against 10.2.0.x (doesn't work at all that I can see), my working version of 3.0 gives a large message in red
"Report printing is currently not available, there is no print server configured." on the Print Attributes for a report.
Thanks
Mike

As a followup to others who run ApEx on one machine and OAS on another, the process was quite a bit more convoluted. So is the hope of helping others avoid the headaches I experienced, here's a post I just made over on the XML Publisher forum.
[snip]
I think I'm in the same environment as you. I'm running Windows Server 2003 on two machines. One machine has my Oracle 10gR2 database and the other machine has my OAS installation.
After countless hours going around in circles primarily on Sun's site, I finally found the correct JDK and JRE combination. I already had an older version of the JRE, but it didn't seem to mind that I now have two versions available in different locations.
Anyway, after getting these installed, the BI Publisher install finally allowed me to continue.
Next, I had to do the "Start OC4J" (under Start, Programs, Oracle BI Publisher). Then I went into "Welcome to Oracle BI" and clicked the BI Publisher link on the right side. I then logged in with the id and (initial default) password of Administrator. Next of course, I changed the default password. After that, I went into JDBC Connections and created one for my database on the other machine, in the format:
jdbc:oracle:thin:@//my_server:1521/sid_name
Finally after all this I eliminated the Adobe message about the corrupt or damaged PDF. I still have issues with how the output looks, almost everything is piled into the same column on the left side, but at least the connectivity is finally there.
Of course figuring this out wasn't a simple process. I spent around 20 hours of experimenting, researching, getting frustrated, etc. before it all came together.
Hope this helps you out some.
[end snip]
Now I just need to figure out why all the output is getting stacked up on the left side.
Bill Ferguson
Oops, I forgot another step that I saw in one of the documents somewhere. Once you get into the BI Publisher app, where you can create the JDBC Connection, look at your URL bar. It will have your server_name:port in it. Whatever that port is (mine turned out to be 9704 instead of the default 8888), use that on the Apex side, where you define the Instance Settings.
Message was edited by:
wbfergus

HP Laserjet 4100 on ExtendNet XS print server

Morning.
I've connected an HP Laserjet 4100 via parallel cable with an ExtendNet SX ESI6004436 print server. The print server is connectes via ethernet cable with an Airport Express. For Windows there is a software ESI-Tools to handle and install the printer. This tool created the following configuration file:
===== 8>< =====
Print Server Current Configuration File:
Extended Systems Incorporated
Boise, ID USA
Phone: (208) 322-7800
Technical Support:
Phone: (800) 235-7576
FAX: (406) 587-9170
Current Print Server Settings For: ESI6004436
File Created: Thu Jul 05 23:06:15 2007
System Information:
System Name: ESI6004436
Description: ExtendNet SX
Contact:
Location:
Print Server Information:
Product Name: ExtendNet SX
Product Number: 2841C
Serial Number: 6004436
Hardware Address: 00:40:68:5B:9E:D4
Cable Type: 10BASE-T
Date Code: 9841B
Firmware Version: 5.20a
MIB Version: 2
Network Speed: 10 Mb
Network Protocol Settings: TCP/IP
(Enabled)
Error: Could not Bind IP Address to Ethernet Address, ARP Failed
IP Address: 10.0.1.100
Source: Permanent
Subnet Mask: 255.255.255.0
Default Gateway Address: 10.0.1.1
WINS Server Address: 0.0.0.0
Unsolicited ARP Refresh: Disabled
Timeout Checking: Enabled (300 seconds)
Network Protocol Settings: NetWare
(Enabled)
Error: None
Mode: UNKNOWN
Print Server Name: ESI6004436
NDS File Server:
NDS Tree:
NDS Print Server:
Queue Scan Time: 4.0 seconds
Frame Format: Ethernet 802.3
Network Protocol Settings: Lan Manager
(Enabled)
Network Protocol Settings: EtherTalk
(Enabled)
Node Address: 81
Network Address: FF00
Status: Running
Port 1 Enabled
Printer Name: ESI-Server
Printer Type 1: Kellerdrucker
Printer Type 2: Kellerdrucker
Zone Name: Vosbergs Airport
===== ><8 =====
In the past I could print on this printer with my MacBook Pro running 10.4.10. But now I had to reinstall my system and forgot the settings of the printer configuration that has worked in MacOS X. So now I can not print and found no configuration that works.
Can some of You help me and tell me how to install this printer properly in MacOS X 10.4.10?
TIA and kind regards, Friedrich
MBP C2D 2.16 GHz Mac OS X (10.4.10) 2 GB RAM

I am struggling with the same problem. I have two HP 4100dtn printers on ethernet. Each has a manually assigned IP address. I can set up the printer(s) just fine in the Print & Fax Preference and Snow Leopard finds the printer just fine when I enter the IP address and chooses the correct HP Driver.
When I try to print, my print job appears in the queue as expected, than an error appears that something about a "bad command". Sorry, I'm home right now and don't have direct access to the printer so I can't give you the precise language of the message, but the gist of the message is that the system tried to connect to the printer to send the print data but the printer does not know how to respond to the command that was sent.
It's as if the firmware in the 4100 just doesn't have something in it's lexicon that Snow Leopard needs. The HP web site is no help. One page I found says the printer is supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01664444&jumpid=regR1002USEN ) and another page I found says that it is not supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01879014&jumpid=regR1002USEN). The HP on line chat won't let me log in and hold a chat with HP unless I know the Serial Number of the printer, which I don't have here at home.
More to follow tomorrow.
Anyone have any ideas?

WGPS606 Print Server

I have just purchased a wireless print server (Netgear WGPS606) and have configured it correctly with my HP Photosmart 8050 on a PC. I am trying to connect my Mac to the print server but for some reason, I am having no success. I have read some of the other questions and they all seem to need the same thing. Could it be a driver I need? Been to printfab.com and there is nothing there for my printer.
Any ideas?

The Photosmart P1100 Gimp-Print driver included in OS X is a generic Photosmart driver that should work for network printing. (HP's driver won't work for network printing)
According to this:
http://www.cups.org/articles.php?L317
In printer Setup, click Add, then IP printer > LPD. Enter the IP address and enter L1 for first printer or L2 for 2nd printer.

Resolution - Printing HP LaserJet & Linksys Wireless Print Server WPS54GU2

Hello Guys:
After trying to figure out for 10 days and calling HP, Applet and Linksys support, i finally am able to print to my printer.
I have iMac running Tiger 10.4.8. I have a HP LaserJet 1012 Printer connected in a USB Port to the Wireless Print Server WPS54GU2. This is what I did to get it working.
First install the following drivers:
1) Go to http://www.linuxprinting.org/macosx/hpijs/ and download hpijs-foomatic-2.0.2.ppc.dmg and espgs-7.07.1.ppc.dmg file. Install hpijs first and espgs second.
2) After that Go to Server Preferences, Double click on Print/Fax.
3) Click on the "+" sign, select Line Printer Daemon - LPD
4) In the Address field, enter the IP address of your print server.
5) In the Queue name (This is very important). I used L2 for USB. You can try P1, L1 as well. Not sure how you have connected to the print server. For me L2 worked. I had tried using L1 and P1 and it didn't work for me.
6) The Name field should automatically be populated.
7) In the Print Using, select HP and then select "HP LaserJet 1012 Foomatic/hpijs" as the printer or whatever driver you have for your printer.
8) Click on Add
And now open up text edit or something and you should be able to print.
let me know if there are any questions.

Try Repairing permissions (Disk Utility). Then restart, then add again.
What do you mean by the printer doesn't show up - the driver (print using:)?
You can try the generic HP Photosmart P1100 Gimp-Print driver that comes in OS X.

Printer Server configuration for APEX 3.1.2 in 10g XE

Similar Messages

Maybe you are looking for