Printer set up question

what software/driver do i need to use hp office jet 6500 wireless

It's an easy setup. If the printer has a jetdirect card you assign an IP address, plug it into your network, and set up the printer as a jetdirect printer in CUPS.
Point a browser to http://localhost:631 for the CUPS setup. Manage Printers --> Add Printer.

Similar Messages

SFC printing set-up question

Hi,
I have problem wit printing SFCs after releasing the ShopOrder. We have Loftware in use.
I have SO qty of 100. Then I release all SFCs.
Depending on document settings (print by SFC / SO) I either get
1. One file with all SFCs information
2. One file with information of the first SFC only
We need one file / one SFC. How can I configure that?
The material to be used is panel product.
Br,
Pete

Hi,
Releasing SFC by SFC generates one file / SFC.
But that does not help. We have to release whole SO at the time.
The printing SY520 activity is on site level POST_ORDER_RELEASE.
Activity should be able to link to SFC creation somehow.
Pete
Edited by: Petri Kauppi on Jun 21, 2010 3:26 PM

Default printer setting

I have a Canon printer set up as the default printer on my Mac. I also have a Dymo label printer that I use occasionally.Althought the Canon printer is the default printer whenever I choose to print from the Dymo printer (using the printer dialogue box - not changing any default settings) the computer never defaults back to the Canon printer. The next time I print, I must remember to open the dialogue box and change it back to the Canon. I usually forget and end up running out a bunch of expensive labels as the computer trys to print a document to the label printer.
Is there another setting that actually makes the computer default back to the default printer after a certain period of time?
I am using Mac OS 10.7.4 and have the latest firmware and software updates for both printers.

Before I print anything I have a question. When
printing and selecting a printer does if no printer
is selected does it take the default printer from the
computer being used? Depends on the application.
Some desktop apps allow you to choose from among all the printers installed on the client machine.
This assumes that you have a printer installed on the computer in question. Do you? One is designated as the default. If the app doesn't prompt you, chances are good that it's using the default. (But it's not guaranteed.)
Our office has over 200
printers and unfortunately this is the first time we
have had to print anything. Typically it is
paperless. Thanks for the help
E.C.I'll assume these are networked printers and not attached locally to a particular machine. Did you add the printer you wanted by searching on the network for a shared server?
200 printers in a paperless office? That's a lot of equipment sitting around doing nothing.
What operating system are you talking about?
What does any of this have to do with Java?
%

Set the default printer setting to landscape in Excel

Hi,
Is it possible to set the default printer setting to "1 page wide" and "landscape" whenever the user clicks print in Excel? I am trying to create an Excel report using XML and XSL. Though the report is created, I am not sure if I can control the printer page setting for MS Excel. Kindly let me know if its possible. If so, how can it be done? its kind of urgent.
Thanks

Your question was posted in the wrong forum.

Won't print set on idle

When I try to print something. It shows up as a print job, but the printer is set on idle and does not print.

Hi , Welcome to the HP Forums! I noticed that your printer will not print set on idle. I am happy to look into this for you! For further assistance, I will need some more information: The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number.If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.If the printer is connected, Wireless, Ethernet, or USB.If the printer is able to make copies.If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. In the meantime, if you are using Windows, please try our HP Print and Scan Doctor, and let me know what happens! Please see this post, Want Good Answers? Ask Good Questions, by , so you can get the most out of these forums. Hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

Default to print setting

I go to "print" and it always defaults to "fax" setting. I have to change setting through the pull down menu. How can i set the default print setting to "print" not "fax"?
This question was solved.
View Solution.

milkprod,
Try clicking the start orb and navigating to devices and printers. Here find your printer and right click then set as default. Let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

PSE 10 Printer Setting Defaults to Rear Tray

I have PSE 10. My OS is Windows 7. My printer is a Canon MG6120. The default print tray selected for the computer and all programs is the Cassette. It was selected under Devices and Printers (path: Control Panel\Hardware and Sound\Devices and Printers). All my programs accept the cassette as the default paper source or Tray, except for PSE 10.
In all other programs, I manually change the Paper Source for rear tray selection through the Printer Properties dialogue window. However, the paper source for my PSE 10, after manually changing from Tray: Rear Tray to Tray: Cassette, resets back to Tray: Rear Tray after printing and even after using the Change Settings and Advanced Settings dialogue windows. Please see the image insert.
I generally print on bond paper. The rear tray is normally closed. If I'm want to print on photo paper, I open the rear tray and insert the photo paper. I verify that I have the printer set to use the rear tray. After printing on photo paper (from any program) I reset the paper source back to cassette.
My questions are, "How do I correct or override PSE 10's automatic resetting of the paper source to the Rear Tray. How do I convince PSE 10 to accept the front-loading cassette as the default paper source?"
PSE10 also insists on reverting to Landscpe orientation. Please see the image insert.
My questions are, "How do I correct or override PSE 10's automatic resetting of the paper Orientation to Landscape. How do I convince PSE 10 to accept Portrait as the default orientation?"
Thank you for any assistance you can provide.

Thanks for responding.
As I stated in my first paragraph, "The default print tray selected for the computer and all programs is the Cassette. It was selected under Devices and Printers (path: Control Panel\Hardware and Sound\Devices and Printers)."
The path I note for Windows 7 is exactly the same for Windows 8, sort of surprised you missed that. As you can see, before submitting to the forum, I addressed everything you mentioned; it did not solve the problem. I've updated the Canon driver and restarted the computer; it did not solve the problem. I made auto-select and portrait orientation the defaults; it did not solve the problem.
Hopefully someone else has a solution or can tell me what's causing the problem. Right now I'm guessing it's some kind of PSE .dll corruption. I hope it is not something in the registry. A little later on I'll uninstall and then reinstall PSE 10 see if that works.
Thanks for taking the time to insert the screen shot.

Browser printing setting in Java

Hello!
I want to have following browser printing setting using java.
(1)     Page Size
(2)     Page Margins
(3)     Page Orientation
(4)     Default Printer
How can I get those?
Regards,
Chetan

But is it possible to get those info via JavaScript?Probably. Google will tell. Here is how to use it.
Type http://www.google.com into your browser's address bar and hit enter. (then bookmark the page, it is very useful)
Type in some keywords related to your question. An example migh be "Javascript print page setup" or something like that. Then hit the search button.
Browse through the links for any suitable pages that may answer your question.
If you do not find a suitable answer, maybe look through those links to find a Javascript forum where you can ask the question to people more likely to know.

How do I change the printer setting to print in Black only?

How can I change my printer setting to print in Black only

It depends on your printer as well; my Epson AIO only does color (even when it is black font only) - or grayscale )sort of a "draft" quality) as it uses some color even for black:

Incompitible Print Setting Error for HP LJ 8500n in Windows Vista

Hi, I have two laptops, one with Windows XP and another with Windows Vista Business. There is a HP LJ 8500n connected with router and accessed by both laptops. Somehow, when I print from Windows XP laptop and I change the print settings there is no error message. But, when I print from Vista Business Laptop, it prints without any error message for default setting, but when I try to change the print setting (to change the paper size or color) the error message comes with "Incompitible Print Settings. It says: "There are one or more conflicting settings. One of the conflicting settings is: Accessory Output Bin: Not Installed. Output Bin: Mailbox 5." Once I click "Ok" it will have same message with output bin changed to Mailbox 6, etc. After I go through approximately 8 to 10 output bins messages, it gives me the screen where I can change the print settings. After that, I can print with revised setting. But, it is very annoying to go through these messages every time I have change the print settings.
Please reply, Thank You,

@fshrago
For the laserjet 3390, you have the option of using the either the Universal Print Driver (network connection) or Windows Update Driver (USB connection) in windows 8.1. Neither of these drivers come with a fax or scan driver.
To use the fax and scan driver, you will need to use the Windwos Fax and Scan Software however you will need to be usb connected. I have given you links to documents that explain how to use both the Windwos Update driver and the Windows Fax and Scan Software.
Driver support included in Windows 8 / Windows 8.1 or in Windows Update - usb connection only
Use the software in Windows 8 to scan - usb connection only
Please understand that the UPD is a print only driver. If you would like a fax/scan driver you will need to connect via USB and use the Windows Fax and Scan driver along with the Windows Update/In-OS driver.
Good Luck.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

WIndows 8.1 printer error: windows cannot print due to a problem with the current printer set up

My HP OFFICEJET 8500 PRO was working just fine wirelessly until I installed the Windows 8.1 update from the Microsoft. Now I cannot print at all. I get an error that says, "windows cannot print due to a problem with the current printer set up". I have tried reinstalling and a ton of other solutions to no avail. Can someone PLEASE Help!

Hello there, @jesseangelique ,
Welcome to the Community!
I would love to help you with the printing issue you're having, since the Windows 8.1 that was done.
Please run the Print and Scan Doctor. Write me back with the results or post a screen shot of the results and I will have a look at them.
This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
Also, let me know which Officejet 8500 Model you have:
HP Officejet Pro 8500 All-in-One Printer - A909a
HP Officejet Pro 8500 All-in-One Printer - A909b
HP Officejet Pro 8500 Premier All-in-One Printer - A909n
HP Officejet Pro 8500 Wireless All-in-One Printer - A909g
Hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printer setting could not be saved operation could not be completed error

printer setting could not be saved operation could not be completed error 0*000006cc

Hello printer setting could not be saved,
When you do receive this error message?
Have you made any changes before this issue?
Please take the following steps for troubleshooting:
1. Update the printer driver from the manufacturer website.
2. Run the printer troubleshooter.
http://windows.microsoft.com/en-us/windows7/open-the-printer-troubleshooter
3. Temporarily block the firewall and check if this issue still exist.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

I have Photoshop CS5 and a Epson 3880 . The print setting dialogue box won't open when selecting color output PRINTER MANAGES COLORS

I have Photoshop CS5 and a Epson 3880 . The print setting dialogue box won't open when selecting color output PRINTER MANAGES COLORS
It does ope when selecting PHOTOSHOP MANAGES COLOURS . This is first time in 7 year this has happened.
Any one with ideas/

What is your screen resolution?
What operating system?

Preview Default Print Setting "Fit to Page" Problem

Preview.app in Snow Leopard has removed the option to print without scaling, and recreating this behaviour with the remaining options is quite complex and requires 4 extra steps.
Steps to Reproduce:
1. Open a document in Preview.app, such as a PDF, of a known paper size.
2. Select 'File' > 'Print…'
3. Change the paper size to one where the default scale value with the default 'Scale to Fit:' 'Print Entire Image' is not 100%. This step is often unnecessary, as many documents will require reduction to include margins, even if the paper sizes match.
4. Select 'Scale:'
5. Select the scale % value.
6. Delete the scale value.
7. Input '100' in the scale value box using the keyboard.
8. Press tab to avoid radar #7256827.
9. Click 'Print'
Expected Results:
Click on a single option to print at 100%, if by chance that wasn't the default option. This would have been one step.
Actual Results:
Does what it says. Steps 4 through 8 are necessary to print at 100% in most cases.
Regression:
This behaviour was as expected in OS X 10.5.x and previous versions, or we wouldn't be having this discussion.
Notes:
Printing at 100% is the only scaling that is common enough to warrant a button to make it an easy one to get to. Preview.app itself even has an 'Actual Size' toolbar button, but has removed this function for printing.
Graphic designers (and other professionals) or specific applications (such as printing on pre-cut or pre-printed paper, labels, or DVDs) can commonly require printing at 100%, and using PDF to distribute documents makes Preview.app the most logical choice for many printing jobs.
Having something other than 100% as a default can cause expensive media to be ruined by a mis-scaled printout, unless these 4 (+1) steps are followed every time.
Most other apps, including Safari, Mail.app and TextEdit default to no scaling, making Preview.app an exception.
I am an architect and this is really annoying!
Does anyone know a workaround?

Sorry no workaround as yet...
I too am now sick of the amount of expensive paper I have wasted due to the Preview app default print setting of 'Scale to fit'.
- No option to print at 100%, you have to manually input this information.
- No way to change this default in preferences, you can change the opening viewing size of a doc to 100% though.
- Doesn't remember the previous settings if you decide to reopen the doc and print another copy.
I also found that if I attempted to print an A4 doc with bleed and crop marks, it would set the default paper size to A4 and the annoying scale to fit would be set to 83%. If I then changed the scale by typing in 100% but don't hit enter for fear of the print starting and then simply use the drop down to change the paper to A3 and then change the orientation and then hit enter it ignores that you have changed the scale and prints your doc at 83% on A3 - Brilliant!
It's a shame to say that I will be going back to acrobat for pdfs!
If you can't put a 100% scale radio button on the print dialogue box either allow people to change the default in prefs or even better allow the presets to control paper size and scale of printing!

How can I set the default print settings of my document as color. I want the default print setting to be color when someone opens a document. similar to duplex print preset is there a color print preset?

How can I set the default print settings of my document as color. I want the default print setting to be color when someone opens a document. similar to duplex print preset is there a color print preset?

Hi,
Try saving your settings as a Preset by clicking the Preset drop down and then select Save Current Settings as a Preset.
Next try changing the settings by selecting the saved preset.
That allow saving the settings for a specific printer, I assume it may also allow selecting these settings for another printer.

Printer set up question

Similar Messages

Maybe you are looking for