Printer setting for teslin paper

Hi
I printed on some normal paper and then some teslin paper
The quality of the print on teslin paper was not as grate to that of standard paper
And also little chunks of print where missing on the teslin paper
In the 'page setup' options for 'properties' there is a drop down box called 'media type' and its set to 'plain paper' as default
There are quite a few options from the drop down box one of them called 'glossy photo paper'
I dont want to print on them all (all of the options) as I dont have a lot of teslin paper
Can someone advice on the best option please
Thanks
Batista230

Hi Batista230,
I've printed on Teslin® Substrate before and I've had no issues. Please let me help you with this.
May I know what type of printer are you using? (i.e. inkjet, laser etc.)
Also, I heard that some ppl out there are selling substandard materials of Teslin. Any possibility that you obtained not the good grade?
Cheers.
Pat

Similar Messages

Needs steps for Printer setting for User-customized Paper Size

Hii
I need steps for Printer setting for User-customized Paper Size
for my requirement i hav to design this for a paper which is 9cm length and width 23cm and printer is Laser printer
Thanks
Ravi

Hi ,
Kindly send me materials regarding printer configuration , I need to confiure a printer .Kindly help me.
My ID is rakeshhaari at gmail dot com
Regards,
Hari

Why do my applications quit when I enter the printer setting for my Epson 10600

why do my applications quit when I enter the printer setting for my Epson 10600

Which Mac and OS do you have?

Does anyone know where to find printer profiles for Epson paper with MG6200 printer using Lightroom?

Does anyone know where to find printer profiles for Epson paper with MG6200 printer for use in LightRoom5?

Epsnm should provide recommended settings (I.e. Which Canon paper type to select). They may also have profiles on their site.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Printer setting for Cheque

Dear All,
I am facing problem while doing Cheque Printing. or (document having definite length). Cheque printing is done on Epson printer.
For Particular Cheque printing I created Page Format Under "Dev. type" SAPWIN     "Rel.4.x/SAPlpd 4.09+ ONLY!".
Page Format Description is:
Format            Ty.    Format               P   L     Lines     Columns    Comment
ZZCHEQUK     S      ZZCHEQUK        X
Format         P L Width            Height
ZZCHEQUK X      00205     MM 00093     MM
Paper Size set on this printer is A4. But client can able to Print in same size & on same printer from there previous software.
Is it required to set particular Height on each & every printer for definite use.
Pl suggest me how to to resolve this issue.
Thanks,
Abhay

Hi Abhay,
Question is not clear like how you are getting out put, so far my understanding from your query, you need to set up both the <i>Device Types</i> and <i>Page Formats</i> from SPAD Tcode.
Ex: page length and width
SPAD -> Device Types
Select the Device type and go to Formats
Select the Printer initilization
Change No of lines and Hex Values.
Page Format is the same like what you defined

Default Printer setting for 2600n causing spinning flashing cirlce cursor in MS Word 2007

Printer drivers for HP2600n are causing spinning and blinking curor in MS Word 2007. I couldn't print in IE9 due to script errors. HP Help said to uninstall and reinstall printer. After reinstalling, I can print in IE9, but now MSWord 2007 has a blinking, spinning, flashing circle on top of the curor. It's maddening and I can't edit. I've run all the "fixes" for MS and Word to no avail.
I've scoured the web to find it's the "default printer" causing the problems. I had to delect the HP as default, and then the spinning circle goes away. But... when I manually select the HP to print within a Word doc, it re-activites the crazy cursor and I must close the doc.
I'm using 32bit Vista, Windows Office 2007, IE9, HP 2600n
Do you have a fix or a patch? Many thanks to a kind person for a solution!

Printer drivers for HP2600n are causing spinning and blinking curor in MS Word 2007. I couldn't print in IE9 due to script errors. HP Help said to uninstall and reinstall printer. After reinstalling, I can print in IE9, but now MSWord 2007 has a blinking, spinning, flashing circle on top of the curor. It's maddening and I can't edit. I've run all the "fixes" for MS and Word to no avail.
I've scoured the web to find it's the "default printer" causing the problems. I had to delect the HP as default, and then the spinning circle goes away. But... when I manually select the HP to print within a Word doc, it re-activites the crazy cursor and I must close the doc.
I'm using 32bit Vista, Windows Office 2007, IE9, HP 2600n
Do you have a fix or a patch? Many thanks to a kind person for a solution!

Printer setting for Billing

May i know how can I check printer device setting, if let say in printing invoice - VF31, different output type that print from different region will have its own printer set? Setting in user profile (SU01) doesnt have affect on this.
Thanks

Hi,
Use transaction SPAD.
Reward if useful!

Default printer setting for users

Hi,
We have a requirement.
User wants to get the print out at his own desk.
Can we set up like the print out should go to the printer assigned to perticular user who execute the transaction.
If user X is assigned to printer 123. and Y is to 456. the printer should default when he trying to process output (Logical destination). I tried maintaining Output type print parameters as USER PARAMETERS. and a printer is assigned to users own data SU3. but still system is asking for output device to assign while processing.
Thanks,
Anand K

O/P is ZF12 and it is for printing Shippment TAG, in T code VT01N.
But i feel the solution might be general not specific to output type. any way it is not a standard form.
Can we create new condition record using Output device from SU3.
If it is possible also is there any other method to achieve this.
Thank you,
Anand K

Printer Setting for Printing

HI All,
i Dont know this is correct way or not to ask this Question
I have Developed a SAP Script and that have 4 pages for example
i need that pages print
but now my Doubt is , if we have a big printer and that have 3 or 4 tray for pinting in this case from our Script first page is from one tray and second page is from some other tray like that need tp print
is that possible ???
if possible that is ABAP work or BASIS settings????
Please Help Me
Thanks
Surendra P

Hi ,
It is possible in you SAP-script only to assign any specific page to a printer tray. Pls check following:
1. In your SAP-Script goto you Pages. Now double click on your FIRST PAGE.
2. Now at the bottom of the screen there is Print Attributes options. Specify your TRAY Name or Number to that Resource Name and keep your printing mode as you like.
3. Similarly you do for your next page. Same as above. Just keep your TRAY name as you want.
It will help you.
Regs,
Lokesh
Edited by: Lokesh Tarey on Mar 26, 2010 8:09 AM

Double sided printing setting for brother HL-2130

Hi, i'm having problem to enable doule sided printing with my Brother HL-2130 printer. I'm having macbook air with MAC OS 10.9 and the driver is brother 4.0.5 HL-2130. Any body have the same problem? I'm really appreciating any helps. Thank you.

Hello,
Yes. Print setup . Ask the user to maintain in his login and ask him to print.
In print setup , there is a option print front and back
Thanks
RK

Printer setting for TO

Hi,
Print to be made automatically after TO has been created in T.Code LB13.
The print to be given to the default printer.
Kindly inform me the steps.
Regards,
Vengat

Have you looked at transaction OMLV - Print control?

Printer doesn't save paper size in saved printer setting

I have saved an A3 printer setting with the paper size as A3 but it always load the dafult paper size (A4) even when I load my A3 setting. Am I doing something wrong?
Canon iR ADV C2020 with the latest driver on 10.8.4

Try holding the Option key and selecting Library from the Go menu in the Finder. Then go to the Preferences folder in the window that opens, and locate the file or files that begins with "com.apple.print.custompresets," and move them out of this folder (e.g., to the trash). After this, log out and back in to your account, and then try setting up your preset again.
You might also remove the file "com.apple.print.printingprefs.plist" since this is involved with what presets are picked.

Printing on Letter size paper, Margin issues!

I am working from a Dell Optiplex 755 with Windows XP, Illustrator CS2 and an HP 4345 printer.
The problem is summarized in the below paragraphed points:
We print on an 8.5x11 sheet of paper, with artwork sized for 8.5 x 11 exactly. The artwork contains 4 quarter page images to be cut into flyers, which each have 1/4" margins all the way around them. There is a back side as well, created with the same specifications. We wish to print these flyers duplex from high quality PDF files that we created in Illustrator.
When the print comes out, the right hand margin of the sheet is larger than the top, bottom, and left margins.
The top, bottom, left margins= 0.166"; this doesn't effect the top, bottom, and left sides of the artwork, as the .25" margin we setup on the artwork is greater than the .166" margin of the print area.
However, the right hand margin= 0.306"; this means that the right side of the artwork gets cut off by .056" (.306-.25")
In order to fit all of the artwork on the page, we can either shift the Page Tiling Print Area over slightly, or we can select the print option "Shrink to Fit". However this is a problem because we are printing the two sides as a duplex (printed both sides), and the tiled artwork on the front won't line up what is printed on the back because of the larger right margin. Therefore if the sides don't line up when we go to cut, the information is going to be cut off on the opposite side to the one we are cutting.
The printer setting for 8.5x11" paper "Letter" is what we believe to be creating the offset margin. (We checked the specifications for a Letter print, and the standard margins were identical to the ones we see exhibited in the print outs, 0.166" vs. 0.306")
We understand that there might be a way to set up your own custom print setting through Adobe Acrobat/ Photoshop/ Illustrator for a specfic type of print job, allowing you to control the print margins, but we are not familiar with the process.
Can you think of any other possible causes and/or solutions for the problems that are described?

Thanks for the feedback Karen! I'm not sure that the setup process is pricesly the same in illustrator but I've got some screenshots of how the artwork is setup to give you an idea.
This is the artwork shown with the Rulers included to show the size of the artboard and where the guides are set for the margins I want:
http://i5.photobucket.com/albums/y198/tcperry/Alanis-Tiled-Artwork-with-g.jpg
This is the artwork shown with the Print Area shown by selecting View>Show Page Tiling:
http://i5.photobucket.com/albums/y198/tcperry/Alanies-showing-print-area.jpg
So I think that the artwork is correctly setup, however the problem lies in the printing area that seems to be predetermined by the printer setting 'Letter' for 8.5x11" paper (see the dotted line on the second screen shot).
I see what you're talking about when you say 'centered on page' and yes we have Auto-Rotate and Center selected in the Page Handling options when printing from PDF. However it will still just chop off the artwork that comes within .306" of the right side of the page. Is there anyway around this .306" margin that seems to be set by the printer?

OfficeJet 6500 A Plus Won't print on certain color paper

When I try to print on certain colors of pastel paper I get an error message saying there is a mismatched page size. This is a refurb unit because the original printer wouldn't print all colors of ink consistently and replacing the printhead didn't correct the problem.
After an hour on the phone with tech support we were able to get it to print on pastel paper if I set it to draft quality but it still won't print in normal quality. Tech support blames it on the brand of paper I have despite the fact that I didn't have this problem with the same paper (even from the same ream) with the original printer. The only solution available to me is to use draft quality or use HP brand paper (and that is simply what I was told, I haven't bought their paper to see if this works - haven't even found their color paper).
Anyone have a real explanation/solution to this problem since HP clearly isn't standing behind this product? (Yes, they have replaced the printhead, the printer and now are replacing the duplexer, but having to replace all these parts and still telling me I have to use draft quality does not bode well for the quality of this product.)
Thanks for any help/suggestions.

I have the same problem. The printer seems to sense the paper before printing and if it's pastel, is feeds that sheet through and every other one until it finds a pure white one, then it prints. I tried different paper type settings under printer properties before printing but no luck.
I got tired of wasting paper and ink so in the end I took a print out on plain white paper and photocopied it onto the pastel paper. That worked fine.
This tells me that the printer driver is messed up or I did not manage to hit on the right paper type setting for the paper I was trying to use.
Photocopying onto your specialty paper is a suitable work around if you are printing just a few pages but not for larger runs.
Irv

What type of paper setting should I adjust my printer to for printing business cards?

HP PSC 2210 all in one
Win XP Pro Media 3rd ed.
No error message
no changes made to the system
I am trying to print out some business cards using Avery 5876 2-sided printable business cards.
When I print a test sheet out of my biz cards on regular 20# paper stock and adjust the settings just so, everything goes well and a trial run using the regular 20 # stock everything comes out great! But when I put in the Avery card stock and hit go, the printer goes a lot slower while making the script and images very dark with excess toner on the card stock only. But not on the paper stock. Why is this?
Should I should change the paper settings on the printer from automatic to what setting for business card stock? If so, to what setting? -- Special papers, greeting cards, brochure papers or what??? PLEASE ADVISE.
THANKS,
Scott
This question was solved.
View Solution.

Is the stock designed for inkjet printers? The cardstock is likley being misread as photo paper by the automatic sensor. I would suggest trying with brochure paper, other inkjet paper or card stock in that order.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printer setting for teslin paper

Similar Messages

Maybe you are looking for